Client proxy

I am executing client proxy. But the message is always stopped in queue (and the queue shows waiting status), eventhough Queues are registered and active.. And there are no errors.
What should I do? I see lot of messages on such threads, but don't know if anybody resolved this.

Hi,
did you check Queue in the R/3 and XI system with SXMB_ADM transaction ? Register the ueues in the both the systems.
Also check this blog-if you did not go thru it
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Regards,
Moorthy

Similar Messages

Error in creation of client proxy.

Hello all,
I try to consume a webservice in SAP ABAP. When i create the service consumer proxy it is giving an error message llike
"Incorrect value: Unknown QName http://wholesale...........................sendeWholesaleMeldungRequest"
Have anyone come across this error scenario.
I m using SAP ECC 6.0.
Regards
Sandep.

Hi Sandeep,
--->While creating client Proxy object to consume the webservice a pop will raise with 4 radio buttons options,i think you had selected any one of that depending upon your requirement,rite,If not do that and try.
-->If you have the WSDL file in your local system select the Radio Button WSDL and import it into your Client Proxy.
-->Also create the Logical Port.
Thanks

** Logical Port in Client Proxy

Hi Friends,
I am doing proxy to web service scenario. My proxy is client proxy. After I created proxy, I checked that. There is no standard method 'EXECUTE_ASYNCHRONUS'. I read the Michal's blog /people/michal.krawczyk2/blog/2009/06/20/pixi-abap-proxies-say-goodbye-to-executeasynchronous-method and understand that this method is not created. The reason is that SAP_BASIS support package level is 15. (Release 700) in our R/3 ECC 6.0 system.
Now, I am not able to test my proxy from SPROXY tcode. It asks Logical Port.
1. Can you tell me, what is logical port ? How do I create this in LPCONFIG tcode ?
2. Once this is done, can I call the class with the method like in older version ?
3. Currently I am getting the information 'No vendor specified' while test proxy withe empty logical port.
Expecting your reply.
Kind regards,
Jegathees P.

Hi Rene,
If a logical port is not configured, the X/PI Runtime will be used instead.
In Jegathees' case, this is probably what happened. If you want to route your message through PI then you need to make sure that you are pointing to your Integration Server (i.e. PI), on ECC use transaction code SXMB_ADM --> Integration Engine Configuration. Role of Business System should be "Application System" and "Corresp. Integration Server" should be your PI server.
You will see when you test your client proxy (using TCode SPROXY) you have the option of choosing XI Runtime - or - Logical port too.
Regards, Trevor

Error at creating Client Proxy of external webservice (WSDL)

Hi Experts,
I try to create a Client Proxy Object out of an external webservice. Here is the WSDL URL:
[http://www.webservicex.net/CurrencyConvertor.asmx?wsdl]
I try to create it with this URL and then I get the error message
Not implemented
Exception of class CX_SIDL_INTERNAL_ERROR
I found two other threads with a similar problem:
cunsuming external webservice in ABAP
Problem while consuming external webservice
But there is no solution that worked for me. In the first thread it is mentioned, that the code between
<wsdl:binding name="XXXXHttpGet" type="tns:XXXHttpGet">
and it's closing brackets should be removed in a local file. I tried that and was able to create a client proxy object out of this local wsdl-file. But then I called the webservice with the folling coding for testing:
report z_currency_converter.
data: convert type ref to zzzco_currency_convertor_soap.
try.
 create object convert
exporting
 logical_port_name = 'Z_LP'
catch cx_ai_system_fault .
endtry.
 data: output type zzzconversion_rate_soap_out .
 data: input type zzzconversion_rate_soap_in .
 input-from_currency = 'EUR'.
 input-to_currency = 'USD'.
try.
call method convert->conversion_rate
exporting
 input = input
importing
 output = output
catch cx_ai_system_fault .
catch cx_ai_application_fault .
endtry.
write output-conversion_rate_result.
The same code worked fine in another system. In this "older" system could also create a client proxy, I think because it has a newer Support Pack version.
SAP says the following:
The problem is that this WSDL uses two bindings different from SOAP
binding which is not in conformance with Basic Profile 1.1 -
http://www.ws-i.org/Profiles/BasicProfile-1.1.html#WSDLBINDINGS .
I looked in the document, but I do not know where the problem in the WSDL file exactly is. What have I to change? Or can somebody give me the URL of a free webservice, that you used for creating a client proxy with a new support pack standing? In the "old" system there is not yet the SOAMANAGER but in the one where it doesn't work.
I hope you have an idea.
Thanks a lot in advance!
Best Regards,
Ingmar

I think it is the problem of version.U need to ask SAP to release some patch levels to correct it.
Regards
Snehasish

Error while creating a client proxy for CBR.RU

Hi!
I need to consume web service. Here is the link: http://www.cbr.ru/DailyInfoWebServ/DailyInfo.asmx?WSDL
I tried to make an own client proxy with SE80 transaction. (edit object->enterprise services -> client proxy -> create) After completing wizard an error occurs with text:
Incorrect value: Unknown Namespace http://www.w3.org/2001/XMLSchema
The same schema works perfecrly with this web service:
http://www.deeptraining.com/webservices/wsStrings.asmx?WSDL
In this case proxy class is created with no errors and everything is fine.
Could anybody let me know what's the reason of such bug, please? I'm not competent with XML schemas so it's kind of difficult to understand what's wrong with WSDL file from CBR.RU

Late response I know, but I have solved a similar problem recently and thought I would share.
Firstly, the problem is not with the namespace. The "Namespace ..." part is just stating the namespace the "Incorrect Value" has. So this error is complaining about the value "Unknown" - which isn't very helpful.
It appears the SAP SE80 importer does not like elements like the following because it can't understand <s:element ref="s:schema" />. It appears this is a common thing to be included in .NET generated WSDLs.
<s:element minOccurs="0" maxOccurs="1" name="GetCursDynamicResult"> <s:complexType> <s:sequence> <s:element ref="s:schema" /> <s:any /> </s:sequence> </s:complexType></s:element>
SAP will also not like this example as it does not support mixed content (see: http://www.w3schools.com/schema/schema_complex_mixed.asp)
<s:element minOccurs="0" maxOccurs="1" name="SaldoXMLResult">
 <s:complexType mixed="true">
 <s:sequence>
 <s:any />
 </s:sequence>
 </s:complexType>
</s:element>
You can "Fix" the problem in both cases by removing the offending text in a local copy of the WSDL file so remove line 4 in the first example and change line 2 in the second to <s:complexType> the proxy can then be generated. No idea if the resulting service will be fully operational though!

Error while creating Client Proxy from SE80

Hi all,
I am trying to create Client Proxy with WSDL through SE80. There is no involvement of XI to create the Proxy.
I am using the option 'Local file' and uploading the wsdl file.
But I am getting the following errors.
"Proxy-Generierung: Fehler aufgetreten"
"Exception occurred in library handler"
"Illegal syntax: Element header has invalid enhancement attribute
http://schemas.xmlsoap.org/wsdl/:required"
If any one could understand them and worked in a similar scenario, pls help me out.
regards,
teja.

hi,
you might want to post the WSDL in question for us to have a look at.
but actually, the error message tells a lot:
http://schemas.xmlsoap.org/wsdl/:required
the second colon(, the one between wsdl/ and required, makes this expression an illegal one in any kind of a URI-like meaning (namespace, ref-URL, ...)
anton

Error while deploying Java Client Proxy

Hi Experts,
I developed a java client proxy.Since i do not have access to visual administrator, i uploaded the ear file to a folder in the XI box and asked the basis folks to deploy it.
On trying to deploy it on to the server they got the following error.
Details:
========
1) Error loading archive
    /usr/sap/XS1/put/R3Ear.ear
    (server side name is: /usr/sap/XS1/put/R3Ear.ear)
    com.sap.sdm.util.sduread.IllFormattedSduFileException: Error during attribute reading: received exception: invalid stored block lengths
What could be the reason for the error?

Hi
recreate your ear file and try to redeploy it.
it could be a zipping problem
Regards
Vishnu

ABAP Client Proxy from ECC 6.0 to XI message irregular recieving

Hi Gurus
Any one has come across issue whereby the ECC 6 system trigger ABAP Client proxy to SAP PI 7.0. The first time the PI is able to recieve it in the SXI_MONITOR. But subsequent trigger from the ECC 6.0 system the SAP ABAP program to trigger the Client Proxy, the PI seem to lost connectivity and did not recieve any message. This is pretty strange and hopefully someone in SDN and enlighten me.
Thanks
Regards
On behalf of malcolm

Hi Santosh
I went to SMQR and register the queue, but it still did not reflect the locked queue when i trigger the ECC 6 to SAP PI 7.0. The green flag - schedule still appear in the SXMB_MONI queue. But i am quite puzzle as why the ABAP client proxy after sending message the first time and second time, the third time it stuck? And also it is not practical to everytime go to the SMQ1 or SMQ2 to unlock the queue. I don't think it a good solution for solving my problem, it is just a temporary solution.

Error while generating client proxy

Hi All,
I have got a WSDL file for which I am generating the client proxy. It is giving me a dump saying that, memory is not sufficient while generating the proxy.
I have also contacted the basis team, even after increasing the memory... we are facing the same issue. Can anyone suggest any solution or SAP Note if there are any???
Thanks in advance.
Bhargava.

Hi,
Please find the dump details below:
ST22 DUMP:
Short text
    No storage space available for FORM stack.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    Try to find out (e.g. by targetted data selection) whether the
    transaction will run with less main memory.
    If there is a temporary bottleneck, execute the transaction again.
    If the error persists, ask your system administrator to check the
    following profile parameters:
    o ztta/roll_area            (1.000.000 - 15.000.000)
           Classic roll area per user and internal mode
           usual amount of roll area per user and internal mode
    o ztta/roll_extension       (10.000.000 - 500.000.000)
           Amount of memory per user in extended memory (EM)
    o abap/heap_area_total      (100.000.000 - 1.500.000.000)
           Amount of memory (malloc) for all users of an application
           server. If several background processes are running on
           one server, temporary bottlenecks may occur.
           Of course, the amount of memory (in bytes) must also be
           available on the machine (main memory or file system swap).
           Caution:
           The operating system must be set up so that there is also
           enough memory for each process. Usually, the maximum address
           space is too small.
           Ask your hardware manufacturer or your competence center
           about this.
           In this case, consult your hardware vendor
    abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each dialog process.
    Parameters for background processes:
    abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each background process.
    Other memory-relevant parameters are:
    em/initial_size_MB:         (35-1200)
           Extended memory area from which all users of an
           application server can satisfy their memory requirement
Error analysis
    You attempted to extend a stack, but the required storage spac
    not available.
    Storage request..............: 8450048 bytes.
How to correct the error
    Please check whether uncontrolled recursive calls caused this
    runtime error.
    Try to decide by analysis whether this request is
    reasonable or whether there is a program error. You should pay
    particular attention to the internal table entries listed belo
System environment
    SAP-Release 701
    Application server... "dcr"
    Network address...... "10.1.105.112"
    Operating system..... "AIX"
    Release.............. "6.1"
    Hardware type........ "00C834224C00"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 4

Creation of client proxy for a WSDL with 2 port types??

Hi,
I am trying to consume an external web service from SAP - ECC6.0. The WSDL file has 2 porttype definitions - one for i/p and one for o/p
When I proceed with SE80 to create a client proxy, it asks me to select any one port type to generate the client proxy. If I select only the input port, it generates proxy for the input port alone.
In this scenario, how do I create proxies and configure logical ports, and call it from a single program to invoke the whole web servie with both i/p and o/p?
TIA,
Regards
Deepthi

Hi,
i. Import your message schemas from external definitions, or RFCs or IDocs from SAP systems. These definitions already contain data types.
ii. Create a message interface and reference the messages of the external definition, or the RFC or IDoc message.
Check this, it may help you
http://help.sap.com/saphelp_nw04/helpdata/en/3f/01623c4f69b712e10000000a114084/content.htm
REgards
Seshagiri

Creation of client proxy out of WSDL?

Hi ,
I need help in creating client proxy out of WSDL. It would be very helpful if someone lets me know the usage of performing this .I'm not much familiar with web services.
Regards,
Christina.

Hi,
right click on your package
create --> Enterprise Service / Web Service --> Proxy Object
-> URL/HTTP destination
-> Specify WSDL URL
Sometimes naming conficts occur.
Save and activate the proxy.
And then you have to call the proxy from a client application
regards

Need some help in creating client proxy to call webservice

Hi experts,
I am new to ABAP so couldnt understand the SAP ABAP jargons.
On of my colleague has written one search help exit function and i need to use that and have to write client proxy to establish connection to webservice.
I never worked on proxy or webservice so, struggling to understand the concept and steps.
I am following second part i.e Release 640 part of /people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap weblog.
I couldnt find "To get the process started, we turn to our old friend SE80. From the Enterprise Services Tab, we are going to select Client Proxy and then hit create"
when i go to transaction se80 ObjectNavigator, i could see two dropdown lists after some tabs.
in first list, I have selected, "Application Hierarchy", and in second I am selecting "Package".
Not sure whether its correct or not.
Once i do this i could see long list of Object name and its description.
Now, what should i do ? where should i go for "Enterprise Services Tab" to create my proxy.
Any help would be appreciated.
Please send me PDF, having detailed steps to create client proxy.
Thanks,
Pranav

Right click on the package and select Proxy object. In the Wizard select Service Consumer.
then give the url of the WSDL file you want to access or path if u have a local file.
then give the package for client proxy.
then complete the wizard. the client proxy will be create in that package.
Next step will be creating a Logical Port using the transaction "lpconfig". Give the proxy name of the service interface created under client proxy. and set the configuration as follows.
1. Make as a default port.
2. in the URL, give the url of the webservice (.asmx)
3. select "State Enabled" and "Message ID"
and after creating a logical port, set the proxy settings as in your webbrowser.
(Http proxy server and port).
then simply execute your webservice from SE80.

How to determine the sender business system for ABAP client proxy

Hi All,
I have one doubt: when the client proxy sends the message to XI, how could i know what is the sender business system name for it?
Is it the logical system which is reflected in Technical System?
let's say if i have the ABAP system, the technical system is ECC, which has three clients: 001, 066 and 000.
And the client 001's logical system in ECCCLNT001 (all the client proxy is created in this client). In this case, the sender business system name is ECCCLNT001, am i right?
If no, please correct me.
Thanks in advance
Leo

Hi lawrence
When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.
A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
Logical system names must contain capital letters and numbers only. SAP recommends the following naming convention for logical system names: <System-ID>CLNT<Client>.
Regards
sandeep

Error in client proxy generation

Hi experts,
 I am trying to consume a web-service from an ABAP progam, to do this I create an Enterprise Service Client Proxy. But creation of the proxy fails with the error message
"Incorrect value: Unknown Namespace http://schemas.xmlsoap.org/soap/encoding/ .
 For client confidentiality issues I cannot put the wsdl file or its content on the thread but I can provide certain details of the code which you might wish to see.
Also my wsdl contains messages with miltiple parts.Is this also a trouble while generating the proxies in ABAP ?
Are these two problems related?
Can I find a link precisely which can provide a kind of checklist to see that these steps have to be followed or these conditions have to be met by wsdl for generation of client proxies in ABAP?
Any pointers will be useful.
Thanks and Regds
Abhishek

Hi Anton,
 I will provide you some piece of the file which might help you in analysing the problem....
<wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:tns="http://www.abc.com"
xmlns:s1="http://www.abc.com/AbstractTypes"
xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
targetNamespace="http://www.abc.com"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
 <s:schema targetNamespace="http://www.abc.com/AbstractTypes">
 <s:import namespace="http://schemas.xmlsoap.org/soap/encoding/" />
 <s:complexType name="StringArray">
 <s:complexContent mixed="false">
 <s:restriction base="soapenc:Array">
 <s:sequence>
 <s:element minOccurs="0" maxOccurs="unbounded" name="String" type="s:string" />
 </s:sequence>
 </s:restriction>
 </s:complexContent>
 </s:complexType>
 </s:schema>
Similarly the WSDL has messages with multiple parts like:
<wsdl:message name="GetReleasedGenericDrawing2DHttpGetIn">
 <wsdl:part name="DocumentNo" type="s:string" />
 <wsdl:part name="SheetNo" type="s:string" />
 <wsdl:part name="ClassName" type="s:string" />
</wsdl:message>
If you need some ther details from the file please let me know. I have cross checked that it is using a Document/literal style so it should not be a problem.
I have gone through the SAP note (944029) for the list some forbidden keywords which were a problem prior to release of SP 16 .We dont have even that problem.
This thing is very new to me ....please let me know if you wnat some other detail for analysis.
Regads
Abhishek

Doubt in client proxy

Hi All,
I am trying to do the client proxy scenario, my scenario is to fetch the material data from R/3 and place it in a file. from material master i am taking 4 fields data matnr,mbrsh,mtart,meins and created a program to fetch the data for those fields. please find the code below
REPORT ZABAP_PROXY.
DATA : Proxy TYPE REF TO ZDEV1CO_MI_MATERIAL_OB. " Class name
DATA : It TYPE ZDEV1MT_MATERIAL. " outbound interface name
DATA : It_mara like mara occurs 0 with header line.
CREATE OBJECT proxy.
TRY.
SELECT * from MARA into table It_mara where ersda eq sy-datum.
loop at it_mara.
move-corresponding : it_mara to it-Mt_Material.
endloop.
CALL METHOD PROXY->EXECUTE_ASYNCHRONOUS
 EXPORTING
 OUTPUT = It.
 COMMIT WORK.
CATCH cx_ai_system_fault.
 DATA fault TYPE REF TO cx_ai_system_fault.
 CREATE OBJECT fault.
 WRITE:/ fault->errortext.
In order to test this scenario i am doing in the following way.
first i am executing my abap program and then going to tcode sproxy and choose our outbound message interface and execute then i will get the one screen where i will input sender service , sender name space sender interface and checked the check box generate template data and i am getting the data in the file in destination system byt iam getting data as This is a string 1, this is a string 2 .. etc. but not the actucal data from material master. knidly syggest me the way i am following is correct or wrong and provide me some solution for this
Thanks in advance.
Regards,
Prem.S

Aarthi,
If i didn't check the check box Generate Template data then i am getting empty values as like below :
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:Mt_Material xmlns:ns1="urn://clientproxy.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Matnr />
<Mbrsh />
<Mtart />
<Meins />
</ns1:Mt_Material>
how can i get the values from data base related to material , is there any procedure to execute other than this.
Prem.S

Problem in Client Proxy

Hi All,
By using client proxy i am moving material master data into a file, i have finished IR part and activated it after that i went to R/3 side and generated the proxy and activated it . after that i have written a program in abap editor to fetch data for matnr,mart,mbrsh and meins and passed to exporting parameter output in method asynchroneous_execute method. and in XI side i have created receiver determination, interface determination and receiver agreement and activated. And finally i have excetued my program in R/3 . i didn't get the file into my destination and i didn't find any message in sxmb_moni. can any body suggest me where can i look at the status of message and list some possible errors.
Thanks in advance .
Regards,
Prem.S

Hi All,
When i execute sxmb_moni in R/3 system , i am getting the below mentioned error. Kindly porive me some solutions for this.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>404</SAP:P1>
<SAP:P2>Not Found</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"> 404 &nbsp Not Found</td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23">SAP J2EE Engine/7.00 </td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"> The requested resource does not exist.</td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"> Details:</td> <td align="left" valign="top" height="48"><pre> Go to <A HREF="/" target="_parent">main page</A> of this application!</pre></td> </tr> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 404 with the description Not Found Error when sending by HTTP (error code: 404, error text: Not Found)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
List some possibilities for getting this error.
Regards,
Prem.S

Client proxy

Similar Messages

Maybe you are looking for