Client Push install, deploying slower then expected.

I am in the process of standing up my SCCM 2012 R2 enviroment, I have a CAS, and 1 primary site(adding more later), and from the Primary site, I have several Distribution sites. Boundaries have been detected and I have configured them into appropriate
Boundary Groups (Only using IP based Boundaries), and I have pointed the group to the Site server for the distribution point. These sites are only running the Site System, and Distribution Point, the only Management point is on my Primary server. In
the beginning I was manually kicking of the Client install base on collections, but now that I have all my DP set up. I enabled the Client Push Installation, selecting only Workstations, the account is the same account I was using to deploy the clients
manually, and the only Installation Properties is the SMSSiteCode. I enable the Client Push 24 hours ago, and it has only installed on an additional 300 computers, out of about 3000 that had not yet received the client.
I have viewed the CCM.log and I see it rolling through at a slow rate, I expected to get a large influx of clients do to the number without it. Is this a generally slow method? I have clients reporting, in all boundaries, except for 1, and the
DP points are showing they have the SCCM client. I have spot checked the IP Boundaries from SCCM with what I have in our DHCP servers in those locations, and they are correct. I have verified, the service account can ping and has access to the
admin share.
Is there something I missed?

I concur, if you are just now installing clients agents, stop, format your drives and start over, there is no reason for having a CAS and it *will* cause you issues having one.
As for the CCM, process, there are a lot of caveats. First you mentioned having 6,000 clients? Where is this number from? Is this the number of clients discovered by ConfigMgr?
Next, ConfigMgr will *not* generate a CCR for clients not assigned to the site (unless it is forced to during manual client install). No, if are viewing the All Systems collection, any resource without a site code will *not* have a CCR generated for it.
CCM, as Torsten mention, throttles itself to 10 CCRs at a time. Any CCRs that get placed in the ccrrety box get retried every hour. So, if you have 3,000 assigned resources without client agents, it will take a while for it churn through those. The next
time full discovery runs, CCRs will again be created for any assigned resources that do not have the client agent installed.
Jason | http://blog.configmgrftw.com
+1
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

Similar Messages

Can I install directly R2 CU1 client agent when using manual client push install

Hi :)
I've done SCCM 2012 R2 CU1 update and created collections and package to deploy to that collection and update clients, but can I install directly to client R2 CU1 version ?
Now I've first run manualy client push install which install RTM version on client. After some time client shows up RTM version in console.
After that I have to wait that collection with RTM version be updated and update package deployed to that collection and than wait for heartbeat discovery so that client agent version is updated in console.
So, is there any shortcut ?
Thank you
Best regards
Nenad

I know the product team is looking at ways to make this stuff easier. I wrote an article a couple months ago that talked about ways they could simplify the CU process:
http://myitforum.com/myitforumwp/2014/02/10/five-future-configmgr-usability-wins/
You could help by voting up the issue on Microsoft Connect:
https://connect.microsoft.com/ConfigurationManagervnext/feedback/details/817080/dcr-usability-win-simplify-the-quarterly-cumulutive-update-process
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

SCCM 2012 Client Push Install

Hi,
I tried installing the SCCM client from the console on a workstation. The summary shows last installation error 5(Access Denied). But I am the domain admin and I used the same account to install clients on to hundreds of machines in the environment.
I can login to the machine as well and when I connect to the admin$ share on the machine remotely, I do not see the ccmsetup folder(or any other SCCM folder) being created. I verified BITS service is running, firewall is turned off, the domain admins group
is part of the local admin group.
Is there anything else to confirm? Am I missing anything? The workstation runs on Windows 7 Enterprise(64-bit) SP1.
Thank you.

Hi,
I tried installing the SCCM client from the console on a workstation. The summary shows last installation error 5(Access Denied). But I am the domain admin and I used the same account to install clients on to hundreds of machines in the environment. I
can login to the machine as well and when I connect to the admin$ share on the machine remotely, I do not see the ccmsetup folder(or any other SCCM folder) being created. I verified BITS service is running, firewall is turned off, the domain admins group is
part of the local admin group.
Is there anything else to confirm? Am I missing anything? The workstation runs on Windows 7 Enterprise(64-bit) SP1.
Thank you.
NM

MyMacBook Pro System is verys slow then expected result.

hi ,
My mac book pro is hanged vary times last few Days.

Hello there, rinku singh.
The following Knowledge Base article offers up some great recommendations for troubleshooting slowness on your computer:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Client push deployment and CU / hotfix install

I'm trying to figure out a way to do a push install of the 2012 client, CU update, and hotfixes all in one go. I know using the ClientPatch folder method is not supported, but I'm wondering if another way would work.
1) When you do a client push install from the console, does it use BITS?
2) Does it directly use the files in Program Files\Microsoft Configuration Manager\Client on the site server, or the SCCM client package?
3) Could you create a Hotfixes folder under the Client folder, put the CU / hotfixes in there, then use the PATCHES property to point to C:\Windows\ccmsetup\hotfixes\%PROCESSOR_ARCHITECHTURE%\hotfixname.msp?
I know you can use SCUP or packages to do the updates, but it would be much easier to do it all at once. Hence the reason why so many people still use the ClientPatch folder, I guess. I really wish they'd make that a supported option.

1. No, the initial push portion is a straight SMB copy to the target client. However, that only copies a bootstrapper, ccmsetup, which in turn kicks off on the client to download the rest of the necessary files. The download by ccmsetup does use BITS though.
2. ccmsetup downloads the necessary files from the package on the proper distribution point (although it will fallback to the MP where it would be ultimately pulling from the client folder location.
3. Yes, you could create the folder but that would not cause it to be copied to target client. The files it downloads are a fixed list.
The most you could do is add it to the client push properties but that is problematic because the patches are architecture specific. Thus, there really is no good way to do this using client push.
A client startup script however offers many advantages including being able to do this.
Jason | http://blog.configmgrftw.com | @jasonsandys

Installing Internet Clients Using Client Push

I've read throught the MS documentation on how to install internet based clients (http://technet.microsoft.com/en-us/library/gg712298.aspx#BKMK_Manual) and it indicates
that they can be installed using client push. So, if I just add the CCMHOSTNAME property in the client push settings I can then use automatic site wide installation? This is assuming the clients already have a certificate installed. I'm confused because it
shows in this article that you must include other properties and even ccmsetup properties such as /usepkicert. You can only use the client msi properties in the client push settings. Would this work with just CCMHOSTNAME? Also, would I have to add SMSSITECODE
since clients won't automatically be assigned a site based on there boundaries?

You can even leave that property out, as long as you're clients are on the intranet during the client installation. During the first policy retrieval the client will get the information about the Internet-facing site system.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Sccm 2012 client push installation error 120 & 1350

what i can do to resolve this problem a lot of client push installation skipped and get error 120 & 1305

Hi Alaa,
The problem is when you initiated your client push for these clients you forgot to force it.
The machines you are trying to deploy to already have a CCM client or a failed/corrupt installation.
You must re-initiate the client push install for the failing machines, and remember to tick off the
'Always Install the client software' option. This repairs failed/corrupt installations also.
The error code 120 tells you this way:
120 - Mobile client on the target machine has the same version, and 'forced' flag is not turned on. Not processing this CCR ,target machine already have cm client and no force install selected(always install).
1305 - is just that the client push cannot detect which version that is already installed.
All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP

How deploying client settins and doing client push relate

Hello all,
This is going to be kind of a silly question. I am in the process of deploying the sccm client to a group of computers and servers using client push.
I also know I would like to create a custom client settings. I am
trying to figure out the mechanics of how they work together / and related.
I know you can deploy the client settings manually but what does the client settings have to do with the installed sccm client?
Should I deploy the sccm client and then the custom client settings?
Phil Balderos

It doesn't matter which you do first, because the client settings can only be applied when there is a client installed.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Thanks Peter this is what I was trying to wrap my big head around.
Phil Balderos

Best practise for installing patches for SCCM Client 2012 (Both x86 and x64)) - OSD and Client Push Installation

Hi All,
What is best practice for automatic installing of SCCM 2012 client Patches
(using Patch switch) during installation of SCCM 2012 clients? The challenge is that now there are two versions of clients and updates (x86 and x64).
I need information for:
OSD
Client Push Installation
Thank you in advance.
Regards,

Not everything that can be or is supported or not supported is documented (or ever can be):
http://technet.microsoft.com/en-us/magazine/jj643252.aspx
Your expectation here needs to be adjusted. No one recommended contacting support. William just mentioned that *if* you have an issue and needed to contact support, they may decline to help you because you've done something explicitly unsupported.
For clientpatch, here's the specific documentation noting it as unsupported:
http://blogs.technet.com/b/configmgrteam/archive/2009/04/08/automatically-applying-hotfixes-to-the-configuration-manager-2007-client-during-installation.aspx
Additionally, I've also been in contact with the sustained engineering folks responsible for the CUs and they've reinforced the statement.
What can happen? Who knows? Microsoft does not test against unsupported configurations and features -- that's the definition of unsupported. It's not tested so no one really knows. They did find a couple of explicit issues (outlined in that post above) so
know that at least those exist and probably more since it is, as mentioned, abandoned code.
Why does it matter what can happen though? If the folks who write and support the code tell you shouldn't do it, you are simply asking for problems by doing it. Ultimately, you're asking a question that has no defined answer (except "bad"/unsupported things)
that really doesn't matter if you follow the explicit guidance. If you don't, as William points out, that's a risk for you take and an answer for you to discover.
Jason | http://blog.configmgrftw.com

Can't push install clients in 2012 R2 help pls

Hi,
I'm at the headache point already :)
Trying to push install the client, so far i found lots of blogs about checking the account in the Site - Client Installation Settings... witch i tried domain admins, administrators... and yes i added those and the server computer account to the local admins.
-I also have a distribution points in a group and boundaries in boundary groups (all linked to each other)
-I have tried to verify and redistribute the client package
-changed the C:\Windows\System32\inetsrv\config\schema\webdav_schema like mentionned in a thread
-disabled the firewall on the client and created a GPO that allows in and out for filesharing and wmi
-successfully tested access to WMI with wmitest.exe
I still get this:
---> Searching for SMSClientInstall.* under '\\MOMSTIN003\admin$\'
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:37:54 PM
2560 (0x0A00)
---> System OS version string "6.3.9600" converted to 6.30
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:37:54 PM
2560 (0x0A00)
---> Unable to connect to WMI (root\ccm) on remote machine "MOMSTIN003", error = 0x8004100e.
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:37:54 PM
2560 (0x0A00)
---> Creating \ VerifyingCopying exsistance of destination directory \\MOMSTIN003\admin$\ccmsetup.
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:37:54 PM
2560 (0x0A00)
---> Copying client files to \\MOMSTIN003\admin$\ccmsetup.
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:37:54 PM
2560 (0x0A00)
---> Copying file "C:\Program Files\Microsoft Configuration Manager\bin\I386\ccmsetup.exe" to "ccmsetup.exe"
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:37:55 PM
2560 (0x0A00)
---> ForceReinstall flag is set to true SMS_CLIENT_CONFIG_MANAGER
2014-05-22 2:37:55 PM 2560 (0x0A00)
---> Updated service "ccmsetup" on machine "MOMSTIN003".
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:38:10 PM
2560 (0x0A00)
---> Started service "ccmsetup" on machine "MOMSTIN003".
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:38:10 PM
2560 (0x0A00)
---> Deleting SMS Client Install Lock File '\\MOMSTIN003\admin$\SMSClientInstall.MOM'
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:38:10 PM
2560 (0x0A00)
Execute query exec [sp_CP_SetLastErrorCode] 2097152002, 0
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:38:10 PM
2560 (0x0A00)
---> Completed request "2097152002", machine name "MOMSTIN003".
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:38:10 PM
2560 (0x0A00)
Deleted request "2097152002", machine name "MOMSTIN003"
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:38:10 PM
2560 (0x0A00)
Execute query exec [sp_CP_SetPushRequestMachineStatus] 2097152002, 4
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:38:10 PM
2560 (0x0A00)
Execute query exec [sp_CP_SetLatest] 2097152002, N'05/22/2014 18:38:10', 51
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:38:10 PM
2560 (0x0A00)
<======End request: "2097152002", machine name: "MOMSTIN003".
SMS_CLIENT_CONFIG_MANAGER 2014-05-22 2:38:10 PM
2560 (0x0A00)
Any pointers would help... Thx

Alright thx all for the answers,
So what i did here was to create a new application from my new server pointing to the share of our old server, and it worked. so the problem is either with the share, distribution point or package i guess??
i have to get rid of the old server of course so this has to work
Here are the logs on my pc before i pushed from our old server:
<![LOG[Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags=""><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="MOM" MasterSiteCode="MOM" SiteLocality="LOCAL" IISPreferedPort=""
IISSSLPreferedPort=""/><LocationRecords/></Site></Sites><ClientPackage FullPackageID="MOM00003" FullPackageVersion="1" FullPackageHash="55E1F6C3CFA20792F65363CEF017C1377AF84C6920F1D508A47BF74211014B55" MinimumClientVersion="5.00.7958.1000"
RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30373068;4140815872" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>']LOG]!><time="09:36:53.754+240"
date="05-22-2014" component="ccmsetup" context="" type="0" thread="6752" file="siteinfo.cpp:221">
<![LOG[Failed to get DP locations as the expected version from MP 'PAD-I13.montfort.corp.on.ca'. Error 0x87d00215]LOG]!><time="09:36:53.754+240" date="05-22-2014" component="ccmsetup" context="" type="2" thread="6752" file="ccmsetup.cpp:11261">
<![LOG[MP 'PAD-I13.montfort.corp.on.ca' didn't return DP locations for client package with the expected version. Retrying in 30 minutes.]LOG]!><time="09:36:53.754+240" date="05-22-2014" component="ccmsetup" context="" type="2" thread="6752" file="ccmsetup.cpp:11087">
<![LOG[Next retry in 30 minute(s)...]LOG]!><time="09:36:53.754+240" date="05-22-2014" component="ccmsetup" context="" type="0" thread="6752" file="ccmsetup.cpp:8835">
<![LOG[Current AD forest name is montfort.corp.on.ca, domain name is montfort.corp.on.ca]LOG]!><time="10:06:54.001+240" date="05-22-2014" component="LocationServices" context="" type="1" thread="6752" file="lsad.cpp:842">
<![LOG[Domain joined client is in Intranet]LOG]!><time="10:06:54.002+240" date="05-22-2014" component="LocationServices" context="" type="1" thread="6752" file="lsad.cpp:1047">
<![LOG[Current AD site of machine is MONTFORT]LOG]!><time="10:06:54.105+240" date="05-22-2014" component="LocationServices" context="" type="1" thread="6752" file="lsad.cpp:770">
<![LOG[DHCP entry points already initialized.]LOG]!><time="10:06:54.114+240" date="05-22-2014" component="LocationServices" context="" type="0" thread="6752" file="ccmiputil.cpp:75">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="10:06:54.114+240" date="05-22-2014" component="LocationServices" context="" type="0" thread="6752" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="10:06:54.116+240" date="05-22-2014" component="LocationServices" context="" type="0" thread="6752" file="ccmiputil.cpp:1172">
<![LOG[Adapter {E8115CFD-EB6B-470C-916C-E6ACC2E63EE2} is DHCP enabled. Checking quarantine status.]LOG]!><time="10:06:54.120+240" date="05-22-2014" component="LocationServices" context="" type="0" thread="6752" file="ccmiputil.cpp:436">
<![LOG[Adapter {F861C18F-9AA6-4FA3-86DF-606457577BA7} is DHCP enabled. Checking quarantine status.]LOG]!><time="10:06:54.121+240" date="05-22-2014" component="LocationServices" context="" type="0" thread="6752" file="ccmiputil.cpp:436">
<![LOG[Adapter {26B5AE9A-831C-49A3-A4E9-7A05053E8CF1} is DHCP enabled. Checking quarantine status.]LOG]!><time="10:06:54.121+240" date="05-22-2014" component="LocationServices" context="" type="0" thread="6752" file="ccmiputil.cpp:436">
<![LOG[Adapter {2177D51C-0191-447C-8898-73D4E9B6C680} is DHCP enabled. Checking quarantine status.]LOG]!><time="10:06:54.121+240" date="05-22-2014" component="LocationServices" context="" type="0" thread="6752" file="ccmiputil.cpp:436">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">

Installing client via gpo vs client push?

hello all
When it comes to pushing the sccm 2012 client does anyone have any thoughts on the pros and cons of pushing via gpo? We are exploring this as an option. We used client push in the past but wanted to give group policy a try. Just as a side note the sccm 2012
client is already on all of our clients and servers from a previous failed site deployment. So this would be a new client (same version CM12) and a different site code.
Thanks in advance!
Phillip
Phil Balderos

Hi,
I like to use Jason Sandys excellen startup script is executed as an startup script.. it provides much more control and many more features than using the .adm files which ships with SCCM 2012.
Compared to Client push there are many advantages as well, you don't have to open all the ports on the client, the script provides more features like wmi-check. It is a great resource.
http://blog.configmgrftw.com/configmgr-client-startup-script/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec
Thanks guys!
Since the client is already installed on each computer with the old site code how will the install behave considering that piece?
Phil Balderos

Deploying client language pack while client push

Hi All,
How do i deploy specific language pack with client push installation?
Note: I already enabled site for that language and i can see language files are exists in "Client\i386\Language Pack\".
Thanks.

During the client installation the client will install the languages that are available at that moment. When the languages is available later, the client has to be reinstalled. After the installation the client will automatically switch to the OS language.
To detect the installed language, see this key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\CCMSetup\InstalledLangs
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Thanks Peter for information.
Do i need to use special parameter/switch in client install properties while client push installation to install language pack?
Thanks again
Sam

ConfigMgr 2012 R2 Client Push Failing when InTune is Agent is Installed

Hello,
I am in the process of migrating the ConfigMgr client from 2007 to 2012 R2 using Client Push. On machines that have the 2007 client and InTune Agent installed, the 2012 Push is failing. The "Client deployment failure report" is stating
the Failure Description as "Windows Intune client is detected" and the Description Parameter is "5.0.7958.1000 Deployment Error x80004005".
Does anyone know if the ConfigMgr 2012 client can co-exist with the InTune Agent and if so, what is the process for performing the Client Installation.
Thanks

As far as I'm aware you can only uninstall Intune by
1. retiring the device through the Intune console
2. using a script. Download it here
http://download.microsoft.com/download/7/A/4/7A40141C-F038-4147-9DA7-D096E4B2E5B3/Windows_Intune_AIS_Uninstall_Scripts_Extractor.exe
3. Command line. See here
http://www.gerryhampsoncm.blogspot.ie/2013/08/uninstall-windows-intune-client.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM2012-Client Push Installation Process seems very slow to me....

Hi,
I've yesterday configured my first SCCM 2012 installation. Around 146 systems have been discovered so far by using the AD discovery method. But out of those 146 only 9 have agent installed successfully by the time I am writing this post..Dont see any errors
in ccm logs, no dns issues,admin share accessible,and other required services are running, machines are reachable, correct sccm account with required permissions is defined and boundary configured correctly.
How long does it take to install 140 machines. Am I missing something, what else do I need to check, it is the only primary site server with no CAS installed in the site coz the expected clients in future are lesser than 1000 and SQL 2K8 R2 wSP1
with CU6 installed on the same host.
Any suggestion....would be a great help..
Thanks...
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Here is a script I wrote to push clients using PSEXEC tool (part of MS PSTOOLs)
1. I created Install folder on my SCCM server and shared it as Install$ for all Domain Computers
2. in this folder I put
-psexec.msc
-comps.txt (a text file contains computer names as a single column)
-script cm2012_client.cmd
-script install.cmd
3. Start a command line as Administrator and navigate to \Install folder
4.run install.cmd
Note: the script will copy source of Client folder locally to root of c:\, so you may decide to change the location and remove it.
Script cm2012_client.cmd
xcopy \\<your CM2012 Server>\sccm_client\*.* c:\client\*.* /y /s
c:
cd c:\client
ccmsetup SMSSITECODE=<Your site code> /source:c:\client
Script install.cmd (edit path to Install folder)
<path>\install\psexec @<path>:\install\comps.txt -s \\<SCCM Server>\install$\cm2012_client.cmd
Regards,
-Alex
Alex Ignatenko | MCITP:Lync 2010, Messaging, Server 2008 | MCTS:UC Voice, Virtualisation, SCCM, SCOM, OCS | MCSE: Security

SCCM Client Push Installation Wizard does not install the client. CCMSetup folder - not created

Hello,
I have tried running the Client Push wizard for a single computer or a pilot collection of 8 computers, the result is always
the same - no SCCM client is installed on any computer.
The computers are running 32-bit Windows XP SP2.
The Windows firewall is disabled.
The client push installation account is setup and have domain admin and local admin privileges. Client Push automatic method
is not enabled.
The domain is AD WIndows 2000.
The SCCM server is running Windows 2003 R2 SP2 64bit Standard.
The AD schema has been extended.
MP, and SLP are installed and published. (MP is published in DNS as well.)
FSP is installed.
MP, SLP and FSP are running on the same server.
SQL 2005 server is running locally.
System management container is created and all rights and permissions delegated.
With the Push installation account I can access C$ share on the client computer from the SCCM server.
RPC, Remote registry, WMI services are running on the client machines.
All prerequisites are installed from the client folder on SCCM server- latest BITS 2.5, Windows installer 3.1 and MSXML6.
All computers are in the same IP subnet which is listed in the boundaries.
Yet, the client is not being installed.
No CCMSetup folder is created on the client machines in Windows\System32 folder, so it is really difficult to troubleshoot
what the is the issue. I do not see anything helpful in the ccm.log on the server.
I have tried running the CCMSetup.exe manually on one of the workstations and that was successful and reported back to the
SCCM server / console.
What else I should check / try? I really want to push agents via the wizard.
Thank you,
Peter

Hi Wally,
I have changed 2 things:
1. Enabed automatic push installation (so I am not usign the wizard any more)
2. Changed the IP subnet to IP ranges in the site boundairies.
After runnignt the discovery, I was able to see some activities in the ccm.log. A ccmsetup folder is now created but the agent is still not instaleld. Here is the ccmsetup.log
==================================
<![LOG[==========[ ccmsetup started in process 3140 ]==========]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:8853">
<![LOG[Version: 4.0.5931.0000]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:1913">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:3937">
<![LOG[Command line: "C:\WINDOWS\system32\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:3946">
<![LOG[CCMHTTPPORT:    80]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7851">
<![LOG[CCMHTTPSPORT:    443]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7866">
<![LOG[CCMHTTPSSTATE:    0]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7884">
<![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7912">
<![LOG[FSP:    HFXDBSSOM.CORP.EASTLINK.CA]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7927">
<![LOG[CCMFIRSTCERT:    0]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7969">
<![LOG[Config file:      C:\WINDOWS\system32\ccmsetup\MobileClient.tcf]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4341">
<![LOG[Retry time:       10 minute(s)]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4342">
<![LOG[MSI log file:     ]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4343">
<![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="PHX" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="0" FSP="HFXDBSSOM.CORP.EASTLINK.CA" CCMFIRSTCERT="0"]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4344">
<![LOG[Source List:]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4352">
<![LOG[                  \\HFXDBSSOM.corp.eastlink.ca\SMSClient]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4359">
<![LOG[                  \\HFXDBSSOM\SMSClient]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4368">
<![LOG[MPs:]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4371">
<![LOG[                  HFXDBSSOM.corp.eastlink.ca]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4386">
<![LOG[Updated security on object C:\WINDOWS\system32\ccmsetup\.]LOG]!><time="09:45:07.076+240" date="12-06-2007" component="ccmsetup" context="" type="0" thread="3108" file="ccmsetup.cpp:8692">
<![LOG[Sending Fallback Status Point message, STATEID='100'.]LOG]!><time="09:45:07.076+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:9169">
<![LOG[State message with TopicType 800 and TopicId {A450B407-619B-4777-B77E-C3352753B58A} has been sent to the FSP]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="FSPStateMessage" context="" type="1" thread="3108" file="fsputillib.cpp:730">
<![LOG[Running as user "SYSTEM"]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:2534">
<![LOG[Detected 24292 MB free disk space on system drive.]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:465">
<![LOG[DetectWindowsEmbeddedFBWF() Detecting OS Version]LOG]!><time="09:45:07.342+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:511">
<![LOG[Client OS is not Windows XP Embedded]LOG]!><time="09:45:07.342+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:548">
<![LOG[Successfully ran BITS check.]LOG]!><time="09:45:08.745+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:6948">
<![LOG[Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)]LOG]!><time="09:45:08.745+240" date="12-06-2007" component="ccmsetup" context="" type="3" thread="2600" file="ccmsetup.cpp:5813">
<![LOG[Sending Fallback Status Point message, STATEID='308'.]LOG]!><time="09:45:08.760+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:9169">
<![LOG[State message with TopicType 800 and TopicId {3BFABF82-FB74-43FB-8A4A-6DFDEAEAC25C} has been sent to the FSP]LOG]!><time="09:45:08.776+240" date="12-06-2007" component="FSPStateMessage" context="" type="1" thread="2600" file="fsputillib.cpp:730">
==============================================================
There are two red errors I am concerned about:
"Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)
and
"Failed to download 'WindwosXP-KB923845-x86-ENU.exe' from http://HFXDBSSOM.corp.eastlink.ca/CCM_Client/i386/BITS25 with error code 0x80004005).
What should I do to resolve these errors?
Thanks,
Peter

Client Push install, deploying slower then expected.

Similar Messages

Maybe you are looking for