Client Push on Windows 7 x86 with IE9 open.
I everyone, I need to validate something.
I am currently deploying SCCM 2012 R2 for a client of mine.
They are using mainly Windows 7 with SP1 x86 with IE9 installed.
When doing client push from the console or installing any SCCM agent update, we are getting an error message stating the IE just crashed and the error is talking about IEFrame.dl:
Doing the same thing on a Windows 7 with SP1 x64 is not getting an error message.
Anyone can reproduce the error on is side? Or anyone know a workaround for this issue?
We are talking about SCCM 2012 R2 CU3 doing a client push on a Windows 7 with SP1.
There is no update done on Windows (I was using the default install.wim at first then applied all updates) and IE9 is installed (installation file downloaded at
http://techdows.com/2011/03/download-ie9-final-offlinestandalone-installer.html).
I will try the same thing with a all the updates installed on Windows 7 x86.
Thank you for your help.
Mathieu
After some troubleshooting and a bit of luck, the problem is the following:
The December update KB3008923 (Cumulative Update for IE December 2014) was causing the problem on IE9.
The update released on January 2015 KB3025945 is fixing the issue.
This is not an update available through WSUS so you have to look for it at
http://catalog.update.microsoft.com.
There is a bit more information, the problem is recurring but I did not found which task was causing the error so it was not only the installation that was causing the problem. After installing the KB3008923, the problem was present on any x86 Windows 7
computer running any version of configMgr agent (tested on 2012 SP1 and 2012 R2).
After installing the January update, the problem is gone.
Mathieu
Similar Messages
-
Client push error CcmSetup failed with error code 0x8007064c
Installing file 'C:\WINDOWS\ccmsetup\Silverlight.exe' with options '/q'.
File 'C:\WINDOWS\ccmsetup\Silverlight.exe' returned failure exit code 1612. Fail the installation.
InstallFromManifest failed 0x8007064c
ITaskScheduler::Delete failed to delete task Configuration Manager Client Retry Task (0x80070002).
CcmSetup failed with error code 0x8007064c
This error i faced while Upgrading client on Windows Server 2003 ,that i upgraded my SCCM 2012 SP1 to SCCM2012 R2
i tried to uninstall the client and done successfully , while pushing the client again I've the same Error code.
i searched and found SMS 2003 toolkit 2 fixed the problem for some people but i did not .<![LOG[==========[ ccmsetup started in process 8108 ]==========]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X86]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1837">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\Setup\Client\]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:727">
<![LOG[Running on 'Microsoft(R) Windows(R) Server 2003, Standard Edition' (5.2.3790). Service Pack (2.0). SuiteMask = 272. Product Type = 18]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1919">
<![LOG[Ccmsetup command line: C:\Setup\Client\ccmsetup.exe SMSSLP=ldcsccm1v.linkdc.local SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3775">
<![LOG[Command line: C:\Setup\Client\ccmsetup.exe SMSSLP=ldcsccm1v.linkdc.local SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:4425">
<![LOG[No version of the client is currently detected.]LOG]!><time="15:37:25.907-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:2748">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9763"> -
How do i keep adobe flash installed on windows 7 with IE9
I have been having a lot of trouble, i have windows 7, 64 and 32 bit with Internet Explorer 9, I can download Adobe Flashplayer fine, but will loose the install after I shutdown and re start my computer, I have tried many different ways that was suggested by different web sites, none work for the long haul. The control panel shows 32 bit adobe flash Active X 11.6.602.180 and plugin, 11.6.602.180 but will not open with going to the download site again, and re download with the same results after shutdown. I am at a loss for thought, please advise what to do. Thanks Richard Holes,
Hi Richard,
I'd like to investigate what's occurring on your system. Would you be willing to run the following steps to generate a debug log for me? If this looks like too much work, please let me know and if you're willing we can schedule a quick desktop sharing session so I can do this on your system for you.
1. Download the flash_report.bat file attached to this post and extract it to a folder on your desktop
2. Download “SetACL (executable version)_2.zip” from: http://bit.ly/WEppuY
3. Extract the appropriate “SetACL.exe” from either the 64 bit or 32 bit folder and place it alongside the flash_report.bat file that you extracted in step 1.
3. Right click flash_report.bat and select “Run as administrator”
Once run, please copy/paste the contents of the flashreport.txt file into a reply or email to me at [email protected]
If you'd like to try fixing this issue, please walk through the steps outlined in this FAQ and let me know if they helped.
How do I fix Windows permission problems with Flash Player?
Thanks,
Chris -
After windows crashes with firefox open profile always needs to be recreated
Anytime windows crashes or my computer unexpectedly restarts and Firefox is open, the "restore session" screen comes up, then no matter what (if anything) is clicked, Firefox promptly locks up.
I have to create a new profile and copy over the profile folder contents every single time. It is very annoying and frustrating.
I have tried deleting the entire profile folder after the crash, no change.
I have uninstalled and reinstall Firefox (with and without thunderbird), no change.
I have even go through the registry and manually deleted any mozilla and firefox key.
It has been going on in releases 4.x, 6, and now 7.0.1Why not back up your profile (back to the Firefox parent directory), so that you can put it back easily? That way, you save the profiles.ini file as well as the profile.
http://kb.mozillazine.org/Protect_the_profiles_contents -
with windows 7 . running the lastest ver of firefox . with the computer on over 24 hours . You come back to firefox and start to use it , it goes into a blank screen and will not respond until the computer is rebooted.
You will need to Reinstall Firefox because your previous Installation did not end properly or maybe it got Corrupted.
-> Uninstall your current Firefox - [[Uninstalling Firefox]]
* Restart your system
-> [[Installing Firefox on Mac]]
* http://kb.mozillazine.org/Installing_Firefox_on_Mac
Check and tell if its working. -
Does Smart Print work with Windows 7 with IE9 with 64 bit?
I updated Bing Bar & Smart Print (1.1.4.0) successfully, but when I click on the Smart Print icon I get msg to update.
Hi,
The HP Smart print only compatible with 32-bit Internet Explorer (IE) versions, as you may find listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01812475&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Why won't movies play after reinstalling Windows 7 with IE9?
After reloading Windows 7 because of a nasty virus, I cannot get movies or games to display properly. I have deleted Real player, uninstalled and installed Flash Player 5 times and followed all of the procedures listed to solve this problem. Nothing has made any difference. Movies flash and remain black unless you can find the maximize icon and then, in full screen mode it seems to work fine. Games on Facebook flash off and on momentarily. Even adds on web pages won't display correctly. Something is incompatible but what?
Maybe the device driver for your display adapter? See http://forums.adobe.com/thread/945765
-
I have a client that uses Windows that has recently told me she can no longer open the PDFs I send her. I can't find this elusive "Always Send Windows-Friendly Attachments" setting that I have read may solve my problem. Can someone get me there?
Dear Dan,
It was from InDesign that I was creating the shared pdfs. I was one of two Mac drivers in a corporate sea of Win users and had to make the change I mentioned in order for the Win users to see my pdfs for review. The difference from what you appear to be doing was that were all on an MS Exchange Server so the files were shared over the company's Exchange Server e-mail system. However, some of these files occasionally went to outside users via regular e-mail and those people had no issues either.
So what I did was tested and worked for years.
You might look at the Adobe forums or Knowledge Base to see if that is a reported issue with newer version of CS. I was on CS2 when I was doing this, and the other Mac driver was on CS3 but had no problems either.
Some Win users I've talked to find a problem opening some pdfs (not mine) in general and found they had to open Reader first and them open the file from Reader's File menu. That most often happened if the client was using an outdated version of Reader. -
Hi All,
What is best practice for automatic installing of SCCM 2012 client Patches
(using Patch switch) during installation of SCCM 2012 clients? The challenge is that now there are two versions of clients and updates (x86 and x64).
I need information for:
OSD
Client Push Installation
Thank you in advance.
Regards,Not everything that can be or is supported or not supported is documented (or ever can be):
http://technet.microsoft.com/en-us/magazine/jj643252.aspx
Your expectation here needs to be adjusted. No one recommended contacting support. William just mentioned that *if* you have an issue and needed to contact support, they may decline to help you because you've done something explicitly unsupported.
For clientpatch, here's the specific documentation noting it as unsupported:
http://blogs.technet.com/b/configmgrteam/archive/2009/04/08/automatically-applying-hotfixes-to-the-configuration-manager-2007-client-during-installation.aspx
Additionally, I've also been in contact with the sustained engineering folks responsible for the CUs and they've reinforced the statement.
What can happen? Who knows? Microsoft does not test against unsupported configurations and features -- that's the definition of unsupported. It's not tested so no one really knows. They did find a couple of explicit issues (outlined in that post above) so
know that at least those exist and probably more since it is, as mentioned, abandoned code.
Why does it matter what can happen though? If the folks who write and support the code tell you shouldn't do it, you are simply asking for problems by doing it. Ultimately, you're asking a question that has no defined answer (except "bad"/unsupported things)
that really doesn't matter if you follow the explicit guidance. If you don't, as William points out, that's a risk for you take and an answer for you to discover.
Jason | http://blog.configmgrftw.com -
AGPM 4.0 SP2 Editors cannot open "Windows Firewall with Advanced Security" area of a GPO
When attempting to Edit a checked-out GPO in AGPM, & navigating to "Computer Configuration\Policies\Windows Settings\Security Settings\Windows Firewall with Advanced Security\Windows Firewall with Advanced Security - LDAP://CN...." Editors
get:
"There was an error opening the Windows Firewall with Advanced Security snap-in
An error occurred while trying to open the policy.
Error: The system cannot find the path specified
Code 0x3"
This happens with GPOs that existed prior to AGPM install where the GPO was "controlled", and with new Controlled GPOs created within AGPM. A workaround is to grant the user Full Control within AGPM (and have them re-launch Group Policy Management
MMC via Shift right-click "Run as different user"), but this circumvents the Change Control we are attempting to use AGPM for. Any ideas of how to fix this, or how to file a bug report?
Also, changes made to Incoming Firewall rules do not show up in the AGPM Settings or Differences reports. I'd imagine this is related to the known issue described on the Release Notes page here:
http://technet.microsoft.com/en-us/library/dn458958.aspxHi Fabian - Thanks for the response. I checked & the AGPM Server is on a subnet that was not mapping to any AD Site. Based on its subnet/location, it actually should be in the same Site as the PDCe. I added a new Subnet definition to
AD & waited until "nltest /dsgetsite" was reporting the correct Site on the AGPM Server. Now, with just Editor role, I can access the Advanced Firewall area of a checked out GPO from my AGPM Client, which is correctly in a different AD Site.
I think this might have solved it.
Should this requirement be added to AGPM documentation? "AGPM Server must be installed on a server that is in the same AD Site as the DC holding the PDCe role."
Thanks for the tip! -
I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files. -
I am running a small client server network with about 27 client machines and windows server 2003 is the server OS. I want the default webpage on firefox to display our department homepage when users log on. I have set IE7 already in the groups policy in the ISS section but this only affects IE7. Any idea how I can do this with Firefox?
You can set or lock default prefs via a mozilla.cfg file.
Pref: browser.startup.homepage , see http://kb.mozillazine.org/browser.startup.homepage
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes
See http://kb.mozillazine.org/Locking_preferences -
How can I turn off Recently Visited Websites when opening new Safari window?
After tapping on the two overlapping boxes on the bottom right of Safari, a new blank window appears with Favorites, but now in iOS 8, recently viewed websites are listed. How can I turn this function off? I do NOT want my new Safari windows to have history displayed of previous websites I visited. I only want my Favorites (on the top) to be displayed. Please help.
Thank you for your time, patience, understanding, kindness, and concern.Thanks for replying, but that isn't the answer I am looking for. Also, there is no + sign, UNLESS you do tap the overlapping boxes.
Let me try to ask my question a little more clearly:
When I tap the two overlapping boxes on the lower left (the option to Open New Windows), the new Window that appears will show your Bookmarked FAVORITES. But with my new iPhone 6, and the new iOS 8.0.2, when I tap the two boxes to open a New Window, my Bookmark Favorites show (as they always have and should), but below them, there is a dividing line underneath them, and it says Recently Viewed Websites, and has these websites available to tap.
So my question is, HOW DO I TURN THESE OPTION OFF?
*UPDATE (10.13.14): Since I have asked this question, I no longer see these Recently Viewed Websites under my Bookmarked Favorites in my new Window tabs. So I hope that Apple fixed it, or somehow it was a mistake, or somehow I changed an Option on my iPhone 6 that stopped this for reoccurring.
Thank you for your help bobseufert! I appreciate your concern, kindness, and the time to try to help. I am grateful.
Have a blessed day. -
For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?
thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements. -
I thought elements were simple but maybe it is just me. Having problems moving photos from iphoto to elements
Duplicate post; see:
had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot
Maybe you are looking for
-
Hi Friends, I have a report where i have to display student photo which is coming from the database field.when i run the report with that image it is giving below error after googling i found one suggestion to restart the 'Net.Pipe Listener Adapter'
-
So whenever I put my earphones into my ipad I noticed that one earphone was not working, now none are working. After closer inspection I have found that my ipads earphone plug in place is pushed far into the ipad. It looks like it needs to be pulled
-
Adobe InDesign CS6 serial number invalid
I am installing Adobe InDesign CS6 and I am getting a serial number invald message for number - <Removed by Moderator>. This is for order 14558604 purchased from Insight our third party software provider.
-
after I up grade to mountain lion search button in finder and mail doesn't work: when I search from something the result is "zero" How can I solve this problem? thank you
-
Internal mic is not working on DV7
after an update my internal mic stop working and im unable to use it with skype or other programs