Client screen gets very slow when viewing from ARD

I don't think this was a problem - or as much of a problem - with earlier versions (pre-Lion?). But when I observe someone's screen, suddenly they can't move windows easily, the redraws get very stuttery, etc.
This is NOT the case if I use regular Apple screen sharing, whic
Any suggestions?
Using Mac Pros, mostly 2009 Nehalems with dual monitors and Lion 10.7.4. "All Computers" has about 160 systems. I'm up to date with the software.

All ethernet GigE connections to switches (no wifi), switch infrastructure is much faster than that (not sure if fibre or 10Gig E), all Brocade switches I believe. The machines ARE on different subnets, but I don't think that's making a difference. ARD also isn't "refreshing" as well as it used to before Lion (meaning, the "All computers" list frequently doesn't update the computer's status). I feel ARD worked much better on Leopard and Snow Leopard, but I have no proof of that.
It helps only if I drop it down to monochrome (using the resolution fader on the upper-right), but it's very hard to work that way.

Similar Messages

My i phone 4 very slow when downloading from wifi..

please help me out what should i do my ip 4 very slow when downloding with wifi....

From all WiFi networks?

MacBook Pro gets very slow when Safari is opened

When I open Safari, my computer gets very slow.
If I quit Safari, everything works fine.
How can I re-install Safari?
Could it be my HD? I have already repaired my HD.
Software: Mac OS X Lion 10.7.5 (11G63)

reboot your computer to the recovery partition by restarting and holding the keys:
<COMMAND> + r
Follow the directions here:
http://mac.tutsplus.com/tutorials/os-x/verifying-and-repairing-permissions-in-os -x/
in the section "Working in recovery mode".
After you repair permissions also perform a disk repair then reboot:

Forms Opening is Very slow when opened from Client PC's.

All,
We are running forms application in 10.1.2.0 application server. We have a peculiar issue of slowness while opening forms from client PC's and not while opening from application server itself.
1) When opening the form from a Windows 7 PC it takes around 25 seconds
2) When opening the form from a Windows XP PC it takes around 15 seconds
3) When opening the form from the application server itself it took less than 3 seconds .
In essence all forms when opened from application server are opening very fast and when opened from client PC's it takes undue time. What might be the reason for the same, can anyone help us and we are pondering over this issue for some time. What are the files of interest to be visited for these kind of issues. We enabled tracing level 5 in JRE and could not find any thing fishy over it.
Request application server and forms experts to participate and help us to resolve.
Thanks in advance.

Even if it's a generic issue you need to break it down in smaller parts to actually get a clue what's causing your problem. By now there is nothing we can rule out as the only thing we know is that it's slow on the client PC's.
Building a small dummy form as suggested by Andreas is a good starting point. If the performance is also bad for a small form with one block you can rule out that it has anything to do with forms and it's caused by e.g. your network. If the small form performs well rebuild one of your forms step by step and do tests for each step. By that you should find what's causing troubles.
What you can also take a look at are network roundtrips: You have to set the console window of your forms, and enable networkstats in your formsweb.cfg
networkStats=yesA typical cause for (unnecessary) roundtrips are e.g. calls to the synchronize built in or timers. If you are using Javabeans you should also take a look at them. If you are looking at your network traffic wireshark is your friend ;).
cheers

Screen moves very slow when i drag a window from one corner to other.

Hi,
We are taking RDP to windows server 2008 R2 standard using Thin-clients.
If I drag a window of explorer or browser to other end of screen it is very slow.(it will work as desktop without video drivers).
Is there any solution for this.
And By the way what is application getting accelerated mean.
Thanks in advance...........

Hi,
Please check if a normal physical computer has the same issue. If not, I’m afraid that the issue is related to the performance of Thin Clients.
Please update the firmware and drivers of your thin clients to the latest and try again.
Thanks.
Jeremy Wu
TechNet Community Support

Pages gets very slow when working on a long table in a document

Hello!
I'm working with a table in pages09. it goes over pages. as soon as i want to write some text in the different fields, or, worse, CHANGE text in the fields, pages gets very very very slow.
why? what can i do?
i tried the wrap/unwrap-function, but it has no influence.besides, if it's not wrapped in the text, i cannot see the whoe table.
do i make some mistake?
thanks for answers, greetings from zürich
kolibri

The code used to drive tables is quite the same than the one used by Numbers.
It is slow in Numbers so, it's logically slow in Pages.
Yvan KOENIG (from FRANCE mardi 24 mars 2009 20:48:40)

My keynote is very slow when exiting from a slideshow, why

Anyone else suffering from keynote acting very slowly when exiting a slideshow?

Yes it's slow in Mavericks, not in other OS versions.
The software is only weeks old so there are many issues with both products.

Cisco AnyConnect Secure Mobility client software has VERY slow file transfers from system on the VPN, about 1/10 of non-VPN.

I'm running Win7, and with the Software only AnyConnect Security Mobility client Version 3.1.04072
I've found that copying a file from a system on the VPN runs at about 1/10 the speed of getting a file from a system that is NOT on the VPN.

first poster -
"Downloads from random internet sites are 5-10 times faster than anything from a server on the VPN."
Your corporate network may just have too little bandwidth, your taking a poor internet route between carriers (ISP's are often maxed out believe it or not), there is a speed an duplex problem or you have a bad MTU. test all of them. your pc's MTU should be 1300. MAX on all interfaces. use the setmtu.exe tool.
Jcohen - if you disable the IPS on the ASA does the slow transfer problem go away?

Microsoft excel 2013 stops working and getting very slow when I work in one file

I am using windows 8.1 pro in my office and I have excel 2013,
When I'm working on excel generally there is no problem, but I have an excel file which I work on in it's too slow and stops working, I have also tried to open the same file in another computer which is having the same problem.
while I was using Office 2010 it was working very fine, I can also share my file with you if you want in order to be checked and resolved.
I appreciate if you help me,

Hi,
You can share the file with us by sending it to GBSD TN Office Information Collection [email protected] Be sure that you have the private information hidden.
Meanwhile, since it works fine in Office 2010, we can try to open the file in Excel 2010, then go to File > Options > Formulas, check if you have enabled iterative calculation. If so, uncheck the check box and switch the workbook calculation to Manually.
Then, save the changes and then open the modified excel using Excel 2013 to see the result.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Command execution get very slow when AAA Authorization enable on ASR 1006

Without Authorization , I am able work smoothly with just click on ASR ...., But Once I enable Authorization it takes many secs to move to other command exampe ( If i hit config t or int gi1/0/1 , it take time to move to next command level) ...
These Authorization issue I am facing only on ASR and for Other Cisco Switches and Router its working fine wiith just a click.
Did any one face such issue , and how it is fix ...
See the Show version for ASR
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.1(2)S, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 23:32 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2011 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
NOITDCRTRCORP01 uptime is 10 weeks, 6 days, 1 hour, 16 minutes
Uptime for this control processor is 10 weeks, 6 days, 1 hour, 19 minutes
System returned to ROM by reload
System restarted at 17:47:32 IST Thu Oct 4 2012
System image file is "bootflash:/asr1000rp1-advipservicesk9.03.03.00.S.151-2.S.bin"
Last reload reason: EHSA standby down
AAA Commands on ASR 1006
aaa new-model
aaa group server tacacs+ tacgroup
server 10.48.128.10
server 10.72.160.10
ip vrf forwarding Mgmt-intf
ip tacacs source-interface GigabitEthernet0
aaa authentication login default group tacgroup local
aaa authentication enable default group tacgroup enable
aaa accounting exec default start-stop group tacgroup
aaa accounting commands 1 default start-stop group tacgroup
aaa accounting commands 15 default start-stop group tacgroup
aaa accounting connection default start-stop group tacgroup
aaa accounting system default start-stop group tacgroup
aaa authorization commands 0 default group tacgroup none
aaa authorization commands 1 default group tacgroup none
aaa authorization commands 15 default group tacgroup none
aaa session-id common
tacacs-server host 10.48.128.10 key 7 13351601181B0B382F04796166
tacacs-server key 7 053B071C325B411B1D25464058

I think your issue maybe related to your tacacs server. If you re-order the two servers (typically a 5 second timer before failover occurs) and see if that improves your performance:
You can try to debug the issue by referring to the command reference guide....i.e. debug tacacs...you can also try to telnet to both ip address to port 49 to see if the connection opens, in order to rule out issues where a firewall or routing to one of the tacacs servers is failing. I also noticed you have the shared secret and tacacs server defined for one of the servers, is the sam present for the other server that is in the server group?
server 10.48.128.10
server 10.72.160.10
to
server 10.72.160.10
server 10.48.128.10
Thanks,
Tarik Admani
*Please rate helpful posts*

IPad gets very slow with large apps installed ?

Hi,
I have a 64GB iPad 3 and I noticed it gets very slow when I install large apps. Apps larger than 1 GB.
I have bought a number of excellent reference apps, but can not keep them on my iPad together.
I have to delete one before I can install the next or else my iPad runs into trouble.
I can have about 5 large apps installed and no more.
It takes forever to boot, restarts, has delays when typing and crashes all the time with my large apps installed.
Is this a limitation of iOS 6, or is it because I have dropped below 10 GB of my 64GB storage.
Does my iPad use the storage for memory?
I bought a 64GB so that I could use my large apps.
Sean

10GB of free space should be adequate. Have you done a Reset?
How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
How to Fix a Slow iPad
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-A-Slow-iPad.htm
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
 Cheers, Tom

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

I was found I pad Air is not that user friendly than I pad 4 even I pad 2, as I was a TaoBao fans and every time when I get in their link, I pad Air cannot show all the pictures on the screen and very slow. It make me very disappointed about this issue.

I was found I pad Air is not that user friendly than I pad 4 even I pad 2, as I was a TaoBao (www.taobao.com) fans and every time when I get in their link, I pad Air cannot show all the pictures on the screen and very slow. It make me very disappointed about this. Could you please help to improve this. Thank you vey much!

iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
 Cheers, Tom

Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Client screen gets very slow when viewing from ARD

Similar Messages

Maybe you are looking for