Client seems to be unable to read response from service

(This is on weblogic 8.1 SP2 using the JWSDP-1.6)
I'm getting the error below on the client side when I call the service using this code:
Stub stub = (Stub)(new DataExchanger_Impl().getDataExchangerSoap());
DataExchangerSoap hello = (DataExchangerSoap)stub;
String result = hello.exchangeData("user","23234-234234","confirm","xml data here");
out.println(result);
Given the stakc trace below I looked at the DataExchangerSoap_Stub class on line 70. This appears to be the client sending the data to the server.
send((String) getProperty(ENDPOINT_ADDRESS_PROPERTY), _state);
On the server I see the incoming data, process it and return an xml string:
<exchangeDataResult>
<status>OK</status>
<message>Transaction accepted.</message>
</exchangeDataResult>
No errors occur on the server. Looking at the stack trace from the client it seems it never even gets to the point where it trys to read the response.
What the hell does this error message mean?
[java] java.rmi.RemoteException: Runtime exception; nested exception is:
[java] unexpected element name: expected={https://partners.mcdata.com/}exchangeDataResponse, actual={http://partners.mcdata.com}exchangeDataResponse
[java] at com.sun.xml.rpc.client.StreamingSender._handleRuntimeExceptionInSend(Ljava.lang.RuntimeException;)V(StreamingSender.java:248)
[java] at com.sun.xml.rpc.client.StreamingSender._send(Ljava.lang.String;Lcom.sun.xml.rpc.client.StreamingSenderState;)V(StreamingSender.java:230)
[java] at com.mcdata.websvc.riverbed.server.DataExchangerSoap_Stub.exchangeData(Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;)Ljava.lang.String;(DataExchangerSoap_Stub.java:70)
[java] at jsp_compiled.__index._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(__index.java:134)
[java] at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(JspBase.java:33)
[java] at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:971)
[java] at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(ServletStubImpl.java:402)
[java] at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(ServletStubImpl.java:305)
[java] at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava.lang.Object;(WebAppServletContext.java:6350)
[java] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(AuthenticatedSubject.java:317)
[java] at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(SecurityManager.java:118)
[java] at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic.servlet.internal.ServletRequestImpl;Lweblogic.servlet.internal.ServletResponseImpl;)V(WebAppServletContext.java:3635)
[java] at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic.kernel.ExecuteThread;)V(ServletRequestImpl.java:2585)
[java] at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(ExecuteThread.java:197)
[java] at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:170)
[java] at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
[java] Caused by: unexpected element name: expected={https://partners.mcdata.com/}exchangeDataResponse, actual={http://partners.mcdata.com}exchangeDataResponse
[java] at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.internalDeserialize(Ljavax.xml.namespace.QName;Lcom.sun.xml.rpc.streaming.XMLReader;Lcom.sun.xml.rpc.encoding.SOAPDeserializationContext;)Ljava.lang.Object;(LiteralObject
SerializerBase.java:161)
[java] at com.sun.xml.rpc.encoding.literal.LiteralObjectSerializerBase.deserialize(Ljavax.xml.namespace.QName;Lcom.sun.xml.rpc.streaming.XMLReader;Lcom.sun.xml.rpc.encoding.SOAPDeserializationContext;)Ljava.lang.Object;(LiteralObjectSerializ
erBase.java:95)
[java] at com.mcdata.websvc.riverbed.server.DataExchangerSoap_Stub._deserialize_exchangeData(Lcom.sun.xml.rpc.streaming.XMLReader;Lcom.sun.xml.rpc.encoding.SOAPDeserializationContext;Lcom.sun.xml.rpc.client.StreamingSenderState;)V(DataExchan
gerSoap_Stub.java:117)
[java] at com.mcdata.websvc.riverbed.server.DataExchangerSoap_Stub._readFirstBodyElement(Lcom.sun.xml.rpc.streaming.XMLReader;Lcom.sun.xml.rpc.encoding.SOAPDeserializationContext;Lcom.sun.xml.rpc.client.StreamingSenderState;)V(DataExchangerS
oap_Stub.java:104)
[java] at com.sun.xml.rpc.client.StreamingSender._send(Ljava.lang.String;Lcom.sun.xml.rpc.client.StreamingSenderState;)V(StreamingSender.java:158)
[java] ... 14 more

When I use
http://208.47.133.243/riverbedshipserver/exchangeData?WSDL
to view the WSDL what is returned has the non-ssl namespace in it and it doesn't match the WSDL I used to generated the service to begin with.
The WSDL doesn't get packaged into the service EAR file, should it? If so where is it supposed to be placed?
Where the heck is 8.1 getting that namespace setting that doesn't have the https in stead of http?
Here is the WSDL I used to create the service:
<?xml version="1.0" encoding="utf-8"?>
<wsdl:definitions
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:tns="https://partners.mcdata.com/"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
targetNamespace="https://partners.mcdata.com/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
name="">
<wsdl:types>
<s:schema elementFormDefault="qualified" targetNamespace="https://partners.mcdata.com/">
<s:element name="exchangeData">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="sender" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="transactionType" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="data" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
<s:element name="exchangeDataResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="exchangeDataResult" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
<wsdl:message name="exchangeDataSoapIn">
<wsdl:part name="parameters" element="tns:exchangeData" />
</wsdl:message>
<wsdl:message name="exchangeDataSoapOut">
<wsdl:part name="parameters" element="tns:exchangeDataResponse" />
</wsdl:message>
<wsdl:portType name="DataExchangerSoap">
<wsdl:operation name="exchangeData">
<wsdl:input message="tns:exchangeDataSoapIn" />
<wsdl:output message="tns:exchangeDataSoapOut" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="DataExchangerSoap" type="tns:DataExchangerSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="exchangeData">
<soap:operation soapAction="https://208.47.133.243/riverbedshipserver/exchangeData" style="document" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="DataExchanger">
<wsdl:port name="DataExchangerSoap" binding="tns:DataExchangerSoap">
<soap:address location="https://208.47.133.243/riverbedshipserver/exchangeData" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Similar Messages

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to read payload from the message object

Hi
I have a scenario where i am send request to http receiver and getting the response. When I am testing through WFETCH it is working fine. But when i am testing through XI I am getting the follwoing error
Unable to read payload from the message object
I have tested the XI payload in mapping. I have done all kinds of testing but it is still giving the same error.
One more strange thing is
I have done one BPM scenario where Data is coming from Source to BPM( which is asyn) and then from it will go from BPM to Target (which is sync) But when I am checking the SXMB_MONI... it showing the messages like this
Source to BPM
Target to BPM
Target to BPM.
But i think it should show message like
Source to BPM
BPM to Target
Target to BPM
why i am getting the flo

Hi
Check with the connection string & Authorization of user you have used.
MSSQL string is
jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
Thanks
Gaurav

Unable to read WSDL from URL

This is my first web service. I thought I read that the
service registers itself when first run, but it's just not jumping
for me. I'd try registering it, but I'm not sure how to fill in all
the blanks in the CF Administrator's Register Web Service form.
I believe I'm doing this pretty plain and simple. Any ideas
why this won't work? Tried both methods, both give the same error
-- "Unable to read WSDL from URL"
Calling URL:
http://prod.trollsoftware.com/echotest.cfm
Is looking at:
http://prod.trollsoftware.com/trollws.cfc?wsdl
which looks fine to me, but what do I know? This is my
first....
RLS

I found this wonderful forum post
{HERE}">http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=7&threadid=881689[/S
and have been tyring to get it to run without removing the "/"
mapping in case that would "break" something on my production
server. I've tried hard to get Approach #2 to work as listed in
that item, but to no avail. I can almost always see the XML code,
but CF never wants to find it as an object reference.
To answer your questions -- and thank you for your help on
this! --
1. Yes. I can see the XML code just fine.
2. No. I get unknown host, connection failure, status not
available.
3. Doesn't work with IP, but that was expected as there are
many domains on this server, not just this one.
So, to continue, I thought I'd back up and try it on my CF7
server. The program runs from here [
http://www.saphea.com/echotest.cfm
against the WSDL/CFC file here [
http://components.findaportal.com/wsdl/trollws.cfc?wsdl
I can see the XML file just fine, but the echotest does not work
(code attached).
I created a mapping of "/wsdl" to
"d:\clients\components\wsdl" in trying to emulate Approach #2, and
created a web subdomain of
http://components.findaportal.com
to "d:\clients\components", but no dice. Approach #2 may have to be
abandoned.
Why would it work for you and not me? That's the weird part.
RLS

Unable to read the Inventory Service Object

Hi,
I got the error message when I startinv.
Errpr code: 603. Unable to read the Inventory Service Object in Novell
eDirectory.
Any one know how to fix it.
Thanks

Mail,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

IB Error: Unable to read symbols from "UIKit" (not yet mapped into memory)

I created a simple view program for iPhone, using IB to add a button and a label, once the button is clicked, the label text is changed.
I am able to compile it fine, and ran it. The program/view showed up. But when I clicked on the button, the console showed this message:
This GDB was configured as "i386-apple-darwin".warning: Unable to read symbols for "/System/Library/Frameworks/UIKit.framework/UIKit" (file not found).
warning: Unable to read symbols from "UIKit" (not yet mapped into memory).
I checked UIKit info, it's physically (full path) at:
/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS2.0.sdk/System/Lib rary/Frameworks/UIKit.framework
The relative path to SKD is:
System/Library/Frameworks/UIKit.framework
I'm running the latest SDK beta 8, OS X 10.5.4 latest update.
Anyone had this bizarre problem? I was able to run all Apple samples fine.
Please help!
THanks!

The answer is mentioned in a few other posts, but I thought I'd repeat it here, so that it's easier to find this solution in the future.
I got the same problem trying to build an iPhone-Simulator application using another build process -- in this case, Boost Build. When I tried to run the program, it gave me the same nonsensical dynamic-library error.
The problem is that the application you built for the iPhone Simulator is NOT a real application, even though it looks like one. You need to run it from within Xcode.
In my case, I got around the problem by building the GLPaint sample using Xcode, copying over the executable it generated with the one I generated via Boost Build, then running GLPaint (actually my program now) from within Xcode. Then it worked.
So far, it seems that Macintosh and iPhone are very unfriendly platforms to someone that's trying to port an existing project. Any attempt to do something, without completely buying into the Apple way of doing everything, leads to a torrent of cryptic undocumented errors. Even an old Unix guru like me can't keep up.

Named Error - unable to read locator from NCP

OES 11 SP2 with DSFW
when rcnovell-named loads, the named.run returns :
dns/db : critical : unable to read locator from NCP server
dns/db : critical : Failed to lod RRs of rootserver zone with error -10
ldapsearch -x -b "" objectClass=dNIPlocator returns 0 object
The DNSDHCP locator object is in the tree adn I have checked all it;s
attributes and references
I have tried out most if the TIDS on this
Any help would be appreciated
Steve

Here they are :
SASL/EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn =auth
SASL SSF: 0
dn: cn=DNS_dsfw-2,ou=OESSystemObjects,o=WILLDAV
dNIPServerDN: cn=dsfw-2,ou=OESSystemObjects,o=WILLDAV
SASL/EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn =auth
SASL SSF: 0
dn: cn=dsfw-2,ou=OESSystemObjects,o=WILLDAV
dNIPLocatorPtr: cn=DNS-DHCP,o=WILLDAV
dNIPDNSServerReference: cn=DNS_dsfw-2,ou=OESSystemObjects,o=WILLDAV
Steve wrote:
> Had to export LDAPCONF first ...
>
> But, my stntax must be wrong as no objexts are found
>
>
> Steve wrote:
>
> > Sorry - BAD syntax in my LDAP statement :
> > Should have been "ldapsearch -x -b "o=willdav"
> > objectClass=dNIPlocator This does return the object :
> >
> > dn: cn=DNS-DHCP,o=willdav
> > objectClass : Rop
> > objectClass: dNIPLocator
> > cn: DNS-DHCP
> > name: DNS-DHCP
> >
> >
> >
> > I'm getting this response for wach query:
> > ldap_sasl_interactive_bind_s: Unknown authentication method (-6)
> > additional info: SASL(-4): no mechanism available:
> >
> > My statemnet syntax is :
> > ldapsearch -Y EXTERNAL -s base -b
> > "cn=DNS_dsfw2,ou=OESSystemObjects,o=willdav" dNIPServerDN -LLL dn:
> > cn=DNS_dsfw-2,ou=OESSystemObjects,o=willdav dNIPServerDN:
> > cn=dsfw-2,ou=OESSystemObjects,o=willdav
> >
> >
> >
> > rkamalesh wrote:
> >
> > >
> > > thhg;2303944 Wrote:
> > > > OES 11 SP2 with DSFW
> > > >
> > > > when rcnovell-named loads, the named.run returns :
> > > >
> > > > dns/db : critical : unable to read locator from NCP server
> > > > dns/db : critical : Failed to lod RRs of rootserver zone with
> > > > error -10
> > > >
> > > >
> > > >
> > > > ldapsearch -x -b "" objectClass=dNIPlocator returns 0 object
> > > >
> > > > The DNSDHCP locator object is in the tree adn I have checked all
> > > > it;s attributes and references
> > > >
> > > >
> > > > I have tried out most if the TIDS on this
> > > >
> > > > Any help would be appreciated
> > > >
> > > > Steve
> > >
> > >
> > > Hi Steve,
> > >
> > > Welcome back!! Could you please attempt the below searches and
> > > copy the output here
> > >
> > > 1. Search for dNIPServerDN for NCP server object on DNS Server
> > > object. frd:~/Desktop/x86_64 # ldapsearch -Y EXTERNAL -s base -b
> > > "cn=DNS_frd,ou=OESSystemObjects,o=novell" dNIPServerDN -LLL
> > > dn: cn=DNS_frd,ou=OESSystemObjects,o=novell
> > > dNIPServerDN: cn=frd,ou=OESSystemObjects,o=novell
> > >
> > > 2. Search for dNIPLocatorPtr attribute on NCP server object that
> > > points to DNS Locator object and ensure all are good.
> > > frd:~/Desktop/x86_64 # ldapsearch -Y EXTERNAL -s base -b
> > > cn=frd,ou=OESSystemObjects,o=novell dNIPDNSServerReference
> > > dNIPLocatorPtr -LLL
> > > dn: cn=frd,ou=OESSystemObjects,o=novell
> > > dNIPLocatorPtr: cn=DNS-DHCP,ou=OESSystemObjects,o=novell
> > > dNIPDNSServerReference: cn=DNS_frd,ou=OESSystemObjects,o=novell
> > >
> > > Based on this search result we will explore further.
> > >
> > > -Kamalesh

Hi, I am using USB 8476s to communicate to a slave unit in LIN network using LabVIEW7.1. Can anyone tell me how i can send a header file plus 1 byte of data to the slave in a LIN network. or how do i use ldf file. i want to read responses from the slave

Hi, I am using USB 8476s to communicate to a slave unit in LIN network. Can anyone tell me how i can send a header frame plus 1 byte of data to the slave in a LIN network. or how do I communictae with slave using LabVIEW7.1.
I want to read responses from the slave. When i tried with labview exapmle programs or even using MAX also, while doing some switching action in my slave, i am getting response as Device inactive with timestamp but there is no data format.
And I have Lin Description File. Can you suggest me how to use ldf file.
I am at customer place and It would be great help from you if you can suggest me at the earliest. Thank you

you may use the LDF Starter Kit to use LDF informations in your application
http://joule.ni.com/nidu/cds/view/p/id/665/lang/en

Unable to read payload from the message object in XI

Hello Guys,
Please help me about my problem in XI version 7.0.im quite new here.
im trying to test my config but error message occured. "Unable to read payload from the message object"
when i checked the comm channel this is the error message :
Error during database connection to the database URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://172.16.40.20:1433;databasename=TRAVEL:SelectMethod=cursor': com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "TRAVEL:SelectMethod=cursor" requested by the login. The login failed.'
when i tried my login in sql it works...but in this message the login is failed..what shall i do..
Please advice.
Thanks in advance
aVaDuDz

Hi
Check with the connection string & Authorization of user you have used.
MSSQL string is
jdbc:microsoft:sqlserver://dbhost:1433;databaseName=example;SelectMethod=Cursor
While doing JDBC its good to refer Note 831162 lot of problems can be resolved.
Thanks
Gaurav

Unable to read configuration from NDS

Dear All,
I just finished setting up this Border 3.9 server few months ago, everything works fine; but from time to time I will get the following message during ACLCHECK as follow: For example this is a log from system console after I made some changes on the proxy access rule.
2-19-2008 2:47:13 pm: BRDSRV-3.70-11
Severity = 1
Timestamp synchronization of BRDSRV.NLM is completed.
2-19-2008 2:47:13 pm: BRDSRV-3.70-11
Severity = 1
Timestamp synchronization of ACLCHECK.NLM is completed.
2-19-2008 2:47:47 pm: ACLCHECK-4.80-9
Severity = 1
ACLCHECK.NLM is reading rules from NDS...
2-19-2008 2:47:47 pm: ACLCHECK-4.80-1
Severity = 1
ACLCHECK.NLM read 15 rules from NDS.
2-19-2008 3:00:09 pm: BRDSRV-3.70-3
Severity = 1
Unable to read configuration from NDS (error - -669).
Again, this BDM server running just fine without any issue, all access rules is working, VPN and filtering is working fine as well. Just can't think of why it throwing me this error from time to time. Any suggestion?
Thank you,
James

In article <[email protected]>, Jkent wrote:
> 2-19-2008 3:00:09 pm: BRDSRV-3.70-3
> Severity = 1
> Unable to read configuration from NDS (error - -669).
>
This is an invalid password error, and I'm unsure why you are getting it.
Do you have a replica on the server?
> Again, this BDM server running just fine without any issue, all access
> rules is working, VPN and filtering is working fine as well. Just can't
> think of why it throwing me this error from time to time. Any
> suggestion?
3.9 sp1 is supposed to come out on Feb 29 - keep an eye out for it.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Unable to read data from the SAP marketplace

Hi All,
    These days, certain packages in my download basketball cannot be downloaded, while others can be downloaded normally.
     After serveral redirecting, the SAP download manager keeps informing me that "Unable to read data from the SAP marketplace, check your settings and try again".
     Anyone knows how to solve it?
Thanks,
Yining

Hi Yining,
You user on SAP MarketPlace is locked.
You have to unlock it but I do not know the way.
Check in user data maintenance on SAP MarketPlace who is your responsible and perhaps he wwill be able to solve to unlock our user.
Regards,
Ronan

Unable to read data from the SAP Service Marketplace issue

Good morning, experts.
I´ve just installed the SAP Download Manager, but I can´t get connected to Marketplace.
First I tried downloading a file I could see in my Basket Download. Then I deleted it from the basket so I could test only the connection. In both situations I got the same error message: "Unable to read data from the SAP Service Marketplace (...)".
It is probably due to wrong settings, but I can´t figure it out. My settings are:
Address: https://websmp205.sap-ag.de/
User name: S0005951541
Password: (my password)
Proxy (my proxy settings)
Any ideas?

Thanks for your answer.
I can see my download basket online. I realize I didn´t delete the items so I could test purely the connection. I am going to do it again.
I found out I dind´t have permission to download those items, and with the right permission I could download them directly online.
As long as I have more information I am going to repost this issue on a new forum.
Thanks.

Read responses from a form

How do I read responses from a completed PDF form?
I used adobe acrobat pro extended 9 to create a form. Was confused at the end as all the methods for publishing the form and collecting responses were more involved than I wanted. I selected the email option.
As a test I made a copy of the blank form. Then completed it, saved the resulting document. How do I read the responses from a completed PDF form document?
I want to manually distrubute the PDF form document. Then manually receive the completed form document back. ( copy it to an "in box" folder ). Then use a program of some sorts ( the adobe SDK? ) to automatically pull the response data out of the completed form.
thanks,

Thanks a lot. I understand better now. I opened the completed PDF with acrobat and the response data was automatically associated with the original document.
Very nice.

The Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi. I'm looking for a possibility to use the iPad for photography while traveling, without

the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
any suggestions?

Check out pogo plug device, it allows you to upload camera roll via wifi.

1456 the remote management agent is unable to read information from edirectory

I have novell 6.5 sp6 and Zfd 7sp1.
From consoleOne I can done the action "remote control" when the
workstation is already turn on.
I can do the "remote wakeup" but after I can't do the login. I can't see
the window novell login.
When the machine is up I have tried to do the action "remote control" but
I have this error:
1456 the remote management agent is unable to read information from
eDirectory.verify the workstation object is valid and the middle tier
server is up and running.
Into the event log I have seen this (under application):
Remote operator: cn=moni.ou=mio.o=mytree.t=tree
console address: CN=P30g-0510_1_1_1.ou=workstation.o=mytree.t=tree
invalid NDS authentication informatiom.
Please, Can sonmeone help me?
thanks for all and excuse me for my poor english I'm italian.
Regards
Monica

I have found my problem:
On my server there isn't SLP configured.
Now my problem became how to configure SLP !!!
thanks for all
Regards
Monica

Client seems to be unable to read response from service

Similar Messages

Maybe you are looking for