Client Server Connection in Evaluation Version

Hi,
I am getting an error while connectng a clinet machine to a server that is running with SBO evaluation version. Error is "Connection to the license server is failed". Any one knows whats going wrong?
Thanks,
Siddiq

Hi Gordan,
Thanks for your response. The matter has been resolved. It was because of antiware.
Thanks again.
Siddiq

Similar Messages

How to activate Windows Server 2012 Datacenter evaluation version with product key provided on MSDN's student account

Hi,
I downloaded
Windows Server 2012 Evaluation Version recently. Actually, I wanted to check whether i could run Windows Phone 8 emulator on Win server 2012 using my core2duo (Non-SLAT PC). Now i wanted to activate the evaluated version by using product key of my
MSDN's student account. But its giving error when i enter my product key. I checked this article about converting evaluation version to full retail version. The article
says :
"If the server is a domain controller, you cannot convert it to a retail version. In this case, install an additional
domain controller on a server that runs a retail version and remove AD DS from the domain controller that runs on the evaluation version."
So kindly guide as to how I can install this additional domain controller and how to remove AD DS from domain controller. Currently, I have Dual Boot PC( win 8.1 and win server 2012).
Hoping to get a brief response....

Unless you have configured a whole lot of things into the DC running on the evaluation copy (should never install production on an evaluation copy), it would be simplest to start from scratch and reinstall.
Or, you simply go into Server Manager > Manage > Add Roles and Features to remove the AD role. Then you will be back to a workgroup server.
The evaluation version is good for 180 days plus three re-arms of 30 days each. So you can do a lot of experimenting with the evaluation copy without the need for using an MSDN key.
.:|:.:|:. tim

OEM connectivity using evaluation version

Hi,
I downloaded OEM(Oracle Enterprise Manager) from oracle site and installed in windows machine and trying to connect to our Production server which has 40 CPU's.It is saying I need to have "select any dicitonary" access to use OEM.
I am not DBA.i dont have sys access but I impressed alot with OEM features mainly performance monitoring and resource usage monitoring.Can I connect to OEM as readonly ?
If yes.Is this evaluation(downloaded from oracle.com) will work for my production 40 CPU server ?
If yes I will try my best to get "select any dictionary" privelege.I am using 10g OEM and my Production instance is 9.2.4.0
Thanks in advance for your help
Thanks
Message was edited by:
user509266

I have OEM agent installed in my Production box.DBA are able to connect to that.
Can I conect to that agent through evaluation version OEM which downloaded from oracle website.Do I need to have license to connect 40 CPU system or evaluation version can also works for this
Thanks
Message was edited by:
user509266

Client/Server connection between unix machines

Hi,
I have a problem about connectivity.
When I try connect to a dsn in a server from a machine with client TimesTen software installed.
Details:
CLIENT1: TimesTen Release 7.0.5.0.0 (32 bit Solaris/x86) (tt705) 2008-04-04T00:06:33Z
SERVER1: TimesTen Release 7.0.3.0.0 (32 bit Solaris) (tt703:17000) 2007-09-12T05:45:43Z
SERVER2: TimesTen Release 7.0.3.1.0 (32 bit Solaris) (tt703:17000) 2007-10-30T22:52:42Z
SERVER3: TimesTen Release 7.0.3.1.0 (32 bit Solaris) (smpcluster:15000) 2007-10-30T22:52:42Z
connections CLIENT1 --> SERVER1 ==> OK
connections CLIENT1 --> SERVER2 ==> KO
connections CLIENT1 --> SERVER3 ==> KO
user@CLIENT1 > ttIsqlcs ngincz_prod_s3scp03
Copyright (c) 1996-2008, Oracle. All rights reserved.
Type ? or "help" for help, type "exit" to quit ttIsql.
All commands must end with a semicolon character.
connect "DSN=ngincz_prod_s3scp03";
S1000: Protocol mismatch; client protocol: 32, server protocol: 32
S1010: Function sequence error
The command failed.
Done.
In error log file server we can see these messages:
11:44:50.42 Err : SRV: 14749: EventID=37| Client version 32 is not supported, the current server version is 31. Contact TimesTen support for instructions on how to download new versions of TimesTen Client/Server
11:44:50.42 Err : SRV: 14749: EventID=68| Failed to read request from client. Closing connection without reply.
Any idea about cause/solution ??

To enable cross release client/server operation you need to add the line
-insecure-backwards-compat
to the ttendaemon.options file located in <tt_install_dir>/info on the system that hosts the datastores that you wish to connect to. For this to take effect you must restart the main daemon so you will need to shutdown all the datastores before doing this!
This is documented in the TimesTen Installation Guide and the Timesten operations Guide.
Regards,
Chris

Cisco ACS Server . Download Evaluation Version For Testing.

Hello.
I want to try to install ACS server for windows to check how this is working with Microsoft AD. Does anyone know where i can download an evaluation version of Cisco ACS Server for Windows ?

Hello Michael-
The ACS version for Windows is no longer available. The product is EOL/EOS:
http://www.cisco.com/c/en/us/products/collateral/security/secure-access-control-server-windows/end_of_life_notice_c51-664639.html
The product was replaced with a Linux based version (5.x) and it is a lot easier of a product to install and manage.
If you want to evaluate the product I would recommend that you contact your local Cisco partner:
https://tools.cisco.com/WWChannels/LOCATR/openBasicSearch.do
Thank you for rating helpful posts!

Calling functions over client server connection

i am currently sending an object between client and server that contains getters that have string variables that are evaluated by a large if statement in the reciever. i was wondering if it is possible to do this a simpler way rather than having a large if statement for all fo the possibilities that are contained in the object.getAction.
ie:
client sends object to server where getAction() = count
server receives object and evaluates the getAction() in a large if statement like so
if object.getAction()=="hi"
hi();
else if object.getAction()=="hello"
that();
else if object.getAction()=="count"
count();
else if object.getAction()=="multiply"
multiply();
is there a simpler and quicker way to do this? i have thought of ways that would just allow a direct calling of a function on the server or client side but i don't see how it would be possible.
something like this...
String function = object.getAction()
function(); -- where function is the string variable it receives from getAtion();
I know it is not possible to call a function from a variable, but that was my idea. any input or ideas wold be helpful.

If your server has an array of predefined Runnable objects and the return value of the getAction() method is an int, then
new Thread(rarray[object.getAction()]).start();In Java, only closure-like object is Runnable.

Client/Server connection question

I am trying to understand some basic connectivity tricks between Client and Server.
I saw my friend doing stuffs like, query google.com with certain keywords, and present the return results on another webpage or program using jsp. I have no idea how he did that, and I wonder if anyone here is familiar with such tricks.
Edited by: ttback on Dec 3, 2007 4:06 PM

To access a specific search thing you can use URL and URLConnection classes like:
String search_query; //input it...
URL url = new URL("http://www.google.com/search?hl=en&q=" + search_query + "&btnG=Google+Search");
URLConnection urlc = url.openConnection();
//read from urlc
//print the result...

Help please with Client Server Connection

I have created a server and a client but I have no clue how to execute both on my computer. Can anyone please help me??

Problem solved!
It took:-
4 day's of discussing this issue with BT though the usual automated telephone answering palava and talking to at least 4 different support team people, all from/in another country with different understanding, communication and training levels.
Running numerous Line tests
Trying 3 different routers (including having to find the old ones in the shed!)
Checking speeds on an iMac, Macbook Pro, iPad and even a Playstation
Methodically checking the settings of the router detail by detail
Running other speed testers
Changing cables
etc. etc...
I finally realised that whilst my connection speed was 8mbps, BT had set an IP Profile for the line of 2mbps. This is not alway's obvious when you run their speedtester as that site doesn't alway's show it to you!
Having rung them again and told them of my discovery I now have between 6 & 7mbps and can hopefully watch steaming video without interuption.
An awful and unneccessary experience - Well done BT!

Loss of Client/Server Connection through

Hello,
i do have a big problem. We loos connection after 10 minutes between oracle-client and server.
It is install a firewall between client and server and the firewall will close this ports after 10 minutes, witch dont user it for the datatransfer. I will hold this connection for the longer time, because on the server runs jobs for a longer time as 10 minutes. When i will try to connect from the oracle-client to the oracle-server, then i get problem with this jobs on a server, because it will start the same job which to run on a server since few minutes.
Can anyone help me, please.
Thanks Frank
[email protected]

Thanks for the answere.
i had find out, how can i hold the connection.
Enable "Dead Connection Detection" i the sqlnet.ora. Set sqlnet.oxpire_time = 10 (10 Minutes is default.)
As soon as the Firewall will clost the connection in 10 Minutes, then set less as 10 Minutes. Use 9 Minutes or less........
Important: Reset the Oraclelistener unter "Services" !!!!
visite website http://asktom.oracle.com
Frank Oehmichen

Client Server mode for time ten connection

Hi, I am new to Times Ten and got a question for running TimesTen in Client Server Mode. When it is running in Client/Server mode:
Does the database just run like a regular remote database ?
Is there security for the remote application, such as userid/password ?
Is there any limitation on number of remote connection can concurrently connect to the DB ?
Does it use the JDBC or it has to be the native library ?
Thank you for your help
Henry

Hi,
With regard to your questions regarding TimesTen client/server mode:
1. Does the database just run like a regular remote database ?
I'm not sure exactly what you are getting at here but yes, I would say that it runs like any other c/s database. If you can be more specific in your question then I can give a more precise answer.
2. Is there security for the remote application, such as userid/password ?
If the TimesTen instance to which you are connecting was installed with Access Control enabled then yes, normal userid/password security applies. The client application must provide a valid TimesTen userid and password in order to establish a connection.
3. Is there any limitation on number of remote connection can concurrently connect to the DB ?
Subject to O/S resource limitations, a single instance of TimesTen (i.e. the TT server) supports a maximum of 9,999 concurrent client/server connections. Each individual datastore supports a maximum of 2047 concurrent connections (direct and client/server).
4. Does it use the JDBC or it has to be the native library ?
The TimesTen JDBC driver supports both direct modde and client/server. The TimesTen ODBC driver is provided in both direct mode and client/server versions. The JDBC driver uses the ODBC driver (it is a type 2 JDBC driver) and so the client machine requires a TimesTen client installation to use either ODBC or JDBC to access a remote datastore.
Chris

Publishing .fla project including client - server socket connection

Hi,
I have designed with Adobe Flash Professional CS5 a .fla project that integrates a client - server connection.
After publishing it, I have the following issue:
- when running the generated .exe file for Windows, then the connection to the server works perfectly
- but when I am running the published .html file, then nothing is sent to the server.
I have tried to change the Publish Settings.
When setting the Local Playback Security in Flash menu to "Access network only" instead of "Access local files only" then the last packet that was send using the .exe file is resent once and that's all (the html client does not receive the response from the server and the next connection attemps generate data transfer).
I guess I have to change some security settings somewhere but I didn't find which.
Does anybody have a hint ?
Thanks.

Hi again,
I was finally able to solve the issue.
I did not get any error message when using firefox, but using iExplorer provided me this error:
"Local-with-filesystem SWF files are not permitted to use sockets"
Googling did then allow me to find the solution here:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
The local locations on which I store my html page during the development has to be added to the trusted locations in the global security settings.
Hope it will help some other people.
Best regards

Downloaded Evaluation Version of Windows Server 2012 Standard- install is asking for product key

I downloaded the evaluation version of Windows server 2012 standard from the Microsoft TechNet site.
When I try to install server 2012 as a new virtual, I'm prompted for the product key for server 2012.
I do not have the key. How do I get the key? Or, why is this happening on a evaluation version?
Does anyone out there have the key for Windows server 2012 standard evaluation version, or know where I can get it?
Thank you.
rhinoguy1

Hi rhinoguy1,
Please down load ISO from following website :
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Using SQL Server Native Webservices in Evaluation Version

Hi,
I am thinking to download SQL Server 2014 Standard Evaluation Version. I have a question before that. Can I create endpoints in this version? SQL Express doesn't supports that so just curious to know.
Bhushan Chanda

Hello,
The Evaluation Edition equal the Enterprise, not the Standard Edition. See
Features Supported by the Editions of SQL Server 2014, yes, Standard+Enterprise supports endpoints.
See also CREATE ENDPOINT (Transact-SQL) => Note: "Native XML Web Services (SOAP/HTTP endpoints) was removed in SQL Server 2012.", if you plan to use such an enpoint.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Client server vs direct linked

Hi, when reading TimesTen documentation it shows that client / server connections are much slower than direct linked, but direct linked require that the application be running on the same machine as the timesten datastore.
For a clustered environment what sort of configuration is recommended so that all nodes have access to the same data?
Thanks

It is of course true that client/server connections are significantly slower than direct mode connections but typically they are still quite a bit faster than a regular RDBMS.
Before deciding on an architecture i would recommend evaluating the performance of client/server connections to see if they meet your requirements.
There are two main architectures that are possible here (I'm assuming that you want a highly-available configuration):
1. A central TimesTen active/standby pair on two machines. The applications run on the rest of the machines in the cluster and access the datastores in client/server mode. If there are some components that need better performance than C/S can provide they can run on the active/standby nodes using direct mode. This setup is easy to configure and easy to manage.
2. Partition the data across multiple datastores distributed across all the cluster nodes. If there are 4 nodes, each will have 4 datastores; one will be the local 'master' for 25% of the total data and the others are read-only copies of the other 75% of the data. TimesTen replication is used to keep all the copies synchronised. Applications can use direct connect mode to access all of the data but applications at a node can only directly update the 25% of data mastered at the local node. Updates for other data must be directed (by the application) to the relevant 'master' node. Essentially, the workload must be partitioned to match the data partitioning. This setup is more complex to configure and more complex to manage but potentially could give better overall performance.
This requirement is not that uncommon and we are considering adding some kind of automatic partitioning/distribution functionality to TimesTen in a future release.
Chris

Server Connect Issues

Hello,
I just built a new computer and was trying to get the computer to connect to the server. if I go to server/connect the http version nothing happens, I get a 404 error. If I go to server/connect, the https version it does link
and I launch the connector software. The system then says it cannot find my server and to put in the ip address of the server. Even putting in the server name or the IP address it still cant find it and cant go any farther.
About a month ago I started hosting a website of my own. In IIS 6 I added the website and no issues. I know it has to deal with this. I even put a stop on the site under IIS manager and it doesn't make a difference.
Any help on how I can get my new computer to connect to the server?
Thanks,

Hi,
Any update?
Just additional. On the server essentials, please open IIS and navigate to WebSite. Then right click it and
select “Edit Bindings…”. Would you please let me know how you configured the site bindings?
In addition, please use following script that Robert created to check IIS configurations.
Windows Server Essentials
- Configuration Troubleshooter
Meanwhile, please start BPA scan and fix all that it can find, then check if this issue still persists.
I find that you can download Connector software when use Https. Please follow the path: C:\ProgramData\Microsoft\Windows
Server\Logs and collect the Computerconnector.log in client computer. It may help us to go further analysis. Please note: the log file is hidden file. When you want to check it. Please open Control Panel, select Folder Options. Then select View tab and check
Show hidden files, folders and drives. You will be able to find the log file.
Hope this helps.
Best regards,
Justin Gu

Client Server Connection in Evaluation Version

Similar Messages

Maybe you are looking for