Client showing wrong free space size for removable storage

I have a Netware share mounted at /back under /back I mount removable drives for backup purposes. I just ran into an issue trying to copy 720gig to...

I am having problems with my contextless login. Novell Client 2 SP3 for Windows 8 (IR10b) . When I put in a user and check the advanced options the...

Similar Messages

  • My harddisk info shows more free space as it has capazity

    hi everyone,
    my harddisk info shows more free space as it has capazity!
    Even after using the harddisk-tool to repair rights and catalog
    the info below the harddrive shows more GB than it's own size.
    This also appears in the info-window (command - i )
    749,GB size of HD / 765,16 GB free
    But the information about the harddrive shown in the harddrive-repair-tool
    seems to be right, and shows approx. 600GB free of the 750GB harddrive ...
    I'am a bit worried and are looking for a solution to repair this ...
    best, boschma

    thx for answering ;-)
    yes, I did, under FIRST AID as well ... no positive result
    thx for the tipp about 'Disk Warrior'
    I will try that - update to follow ...
    edit:
    oops - that's a lot of money to pay for 'Disk Warrior'.
    maybe there are any other utilities? tipps? tricks?
    Message was edited by: bosbos

  • ASE - Started filling free space info for database

    Hi All
    I have an ASE db that is in a RECOVERY state.
    This the last communication in the log: Started filling free space info for database 'BWP'
    Does anyone know what this means?
    There is a SAP BW running on ASE 15.7.
    I am an SAP consultant working onsite at a client and the environment is down due to the DB being in this state.
    Any ideas?
    00:0002:00000:00014:2014/07/03 10:27:18.04 server  Recovering database 'BWP'.
    00:0002:00000:00014:2014/07/03 10:27:18.05 server  Started estimating recovery log boundaries for database 'BWP'.
    00:0002:00000:00014:2014/07/03 10:27:18.07 server  Database 'BWP', checkpoint=(249429512, 203), first=(249429512, 203), last=(249429513, 46).
    00:0002:00000:00014:2014/07/03 10:27:18.07 server  Completed estimating recovery log boundaries for database 'BWP'.
    00:0002:00000:00014:2014/07/03 10:27:18.07 server  Started ANALYSIS pass for database 'BWP'.
    00:0002:00000:00014:2014/07/03 10:27:18.07 server  Completed ANALYSIS pass for database 'BWP'.
    00:0002:00000:00014:2014/07/03 10:27:18.07 server  Log contains all committed transactions until 2014/07/03 10:19:12.65 for database BWP.
    00:0002:00000:00014:2014/07/03 10:27:18.07 server  Started REDO pass for database 'BWP'. The total number of log records to process is 81.
    00:0002:00000:00014:2014/07/03 10:27:18.14 server  Completed REDO pass for database 'BWP'.
    00:0002:00000:00014:2014/07/03 10:27:18.14 server  Timestamp for database 'BWP' is (0x0004, 0xd609797b).
    00:0002:00000:00014:2014/07/03 10:27:18.14 server  Recovery of database 'BWP' will undo incomplete nested top actions.
    00:0002:00000:00014:2014/07/03 10:27:18.14 server  Started recovery checkpoint for database 'BWP'.
    00:0002:00000:00014:2014/07/03 10:27:18.14 server  Completed recovery checkpoint for database 'BWP'.
    00:0002:00000:00014:2014/07/03 10:27:18.14 server  Started filling free space info for database 'BWP'.
    ASE VERSION:
    Adaptive Server Enterprise/15.7/EBF 22779 SMP SP122 /P/x86_64/Enterprise Linux/ase157sp12x/3662/64-bit/FBO/Sat Apr 19 05:48:19 2014
    Any suggestions on what to do?
    J

    ASE tracks the free space available on each segment in memory.
    If the server is shut down politely, ASE can store the current values on disk and retrieve them at startup.  However, if the server is shutdown abruptly (shutdown with nowait, crash, power failure, kill -9, etc.) the free space figures don't get written out.  In that case ASE has to recalculate the free space values by reading all the allocation pages or OAM pages in the database.  On a big database, that can take time.
    Your main choices are to
    1) wait it out
    2) set the "no freespace accounting" database option and reboot
    Disabling free-space accounting for data segments
    While recovery will be much faster with freespace accounting turned off, there are side effects such as unexpected 1105 errors (no free space...) and thresholds not firing as expected.  In general I'd advise waiting it out and trying to avoid the use of "shutdown with nowait" going forward (which may or may not be what brought the server down, but it is the main cause you can control).
    -bret

  • Satellite C660-1PH - HDD shows different free space

    Hello,
    Ive noticed the last days that the 'windows partition C:' of my disk shows different free space without downloading/installing anything
    E.g. I had 104GB free, then on next day it was showing 100GB free and then suddenly it became 104GB again. It happened with different values another day, it just keep changing out of the blue.
    What could be causing this? Could the hard disk be faulty?
    Thank you

    Hi
    Please dont forget that temporal stored files can change value of the free space on the HDD.
    Use the CCLeaner (freeware) software which would delete and remove the temporal stored files.

  • Set tablespace free space (mb) for a single large tablespace?

    It seems that in EM, setting the free space (mb) for locally managed tablespaces affects all of my locally managed tablespaces in the database and not just one.
    I clicked on Tablespace, Edit (button), Thresholds and set the Free Space (MB) Warning and Critical. I thought I was setting it for a particular tablespace (because I chose Edit on a single tablespace). But then I got alerts from much smaller tablespaces because those tablespaces had much smaller MB than the thresholds that I just set.
    Using EM GC, is there a way to set the free space (mb) to alert for a single large tablespace where defining a critical free space mb is better than setting a free space percent?

    ok, go to the database you want to manage.
    Then click on Metric and Policy Settings (link at the very bottom).
    Scroll down to the 'Tablespace Space Used (%)' metric, and click on the edit button
    Now, click on the 'add' button to setup settings for individual tablespaces.
    Bazza

  • What actually happens @Completed filling free space info for database

    Hello,
    i see some strange thing with my 15.7 Ase server
    Earlier for a very big db of around 1TB the recovery time would be around 15Mins( i mean for the 1TB db to come online).
    Now its taking only seconds to come up.
    so wanted to check what actually happens in this stage.
    Started filling free space info for database 'xxx'
    Completed filling free space info for database 'xxx'
    The difference is that we have created new server and bcpd the data into it.
    Please can someone explain.
    Thanks

    ASE keeps counters in memory of the amount of free space available on devices and segments.  When ASE is shutdown cleanly (aka "politely"), these values are flushed to disk and used to initialize the in-memory counters on reboot.  If ASE is shutdown abruptly, the values have to be recalculated, a process which involves either reading every OAM page in the database or every Allocation page.

  • VM2.2 manager page shows wrong status "Shutting down" for VM Guest

    Hi,
    VM manager page shows wrong status "Shutting down" for VM guest, I can very much connect to console and see it is up and running.
    It happened when trying to shutdown VM guest manually but in parallel VM server got rebooted automatically.
    Any information on How to correct the status in VM manager page?
    Thank you.

    I found below this solution on http://download.oracle.com/docs/cd/E15458_01/doc.22/e15441/appendix_e.htm#BHBCIAJB
    To solve this problem, change the status manually as follows:
    1.Make sure that the virtual machine in the target server has been shut down. Use xm list or virsh list to check the virtual machine name and ID.
    2.If the virtual machine is running, use xm shutdown vm_id or virsh shutdown vm_id to shut it down, where vm_id refers to the virtual machine name or ID.
    3.Use xm list or virsh list to check if the virtual machine has been shut down. If it is still running, use xm destroy vm_id, or virsh destroy vm_id to shut it down.
    4.Log in as oracle (or root first, then su - oracle) to the computer where Oracle VM Manager is installed, and run the following commands to change the virtual machine status to Powered off in the Oracle XE database:
    export ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server'
    export ORACLE_SID=XE
    $ORACLE_HOME/bin/sqlplus / as sysdba
    SQL> update ovs.ovs_vm_img t set t.status='Powered Off' where t.img_name like 'vm_name';
    SQL> commit;
    SQL> quit
    vm_name refers to the virtual machine name.
    5.Retry your operation, or delete the virtual machine directly.

  • Activity monitor shows wrong disc space

    why does activity monitor shows wrong disc space after delating items still look as if they are there

    See:
    Where did my Disk Space go?
    What are Local Snapshots?

  • The creative cloud free space is for lifetim, the 2GB, or for one month trial

    the creative cloud free space is for lifetim, the 2GB, or for one month trial???

    Just sign in with your Adobe ID at the Creative Cloud Files page at https://creative.adobe.com/files. You can then use the upload button to upload files, or drag-and-drop files from the Windows Explorer/Mac Finder. Here is a video explaining the file upload http://tv.adobe.com/watch/learn-creative-cloud/uploading-files-to-creative-cloud/.
    If you use one of the Adobe Touch Apps (Ideas, Photoshop Touch, Proto) then the files you sync with these apps are also stored in the same file storage, and are accessible from the Files page.

  • WBAdmin BMR backup says "There is not enough free space on the backup storage location to back up the data."

    We're doing nightly BMR backups of a small 2012 R2 Hyper-V host via wbadmin to 2TB USB disks, via
      wbadmin start backup -backupTarget:z: -quiet -noverify -vssFull -include:e:,c: -allCritical
    (where E: contains the sole VM).
    We are using the same backup system on other similar Hyper-V hosts running 2008 R2 and 2012, with no problems. However, with this 2012 R2 host, after a few months of no problems the backups started failing with:
      There is not enough free space on the backup storage location to back up the data.
    This made no sense, and continues to make no sense:
    The 2TB backup disks are only half full (>1TB free), with 600GB of unallocated shadowstorage.
    There should be room for many more backups on these disks. Each currently contains 11 to 13 backups, with the initial full backup having required about 600GB and each subsequent backup only requiring another 20GB to 40GB.
    There is over 40GB free on the C: drive and 300GB free on the E: drive; free space on the host volumes is not an issue.
    Increasing the shadowstorage limit on the backup disks to unbounded doesn't resolve the issue.
    This is not a problem of a RECOVERY partition that's too small, and SystemState backups always complete successfully.
    The first workaround we found was to temporarily reduce (not increase) the shadowstorage allocation on the E: drive (containing the VM) and then increase it back (with the end result of deleting old shadow copies).
    This worked reliably, but looking for a root cause led us to uninstall the Windows Updates installed mid-September (in particular the Aug 2014 and Sep 2014 roll-ups), which preceded the start of this problem. But instead of resolving the problem the uninstalls
    made it worse, in that our workaround stopped working.
    We reinstalled the Windows Updates, and then tried setting backup performance to normal, in case the problem was related to VSS on the host volumes, but the errors continued.
    At this point the only way we've found to work around the error is to delete 1 or 2 of the oldest backups on the destination disk, via
      wbadmin delete backup -backupTarget:z: -deleteOldest
    after which the new backup will succeed.
    But, again, this makes no sense, as the destination disks are only half full, and even if space was an issue wbadmin should delete old backups as required. And this same system is working fine on 2008 R2 and 2012.
    Any suggestions?
    Thanks,
    John

    Hi John,
    Please check run the command below to check if the space required to complete the backup causes the snapshot storage space to become less than 1/8 of the target size.
    vssadmin list shadows /for=x: will list the shadow copies on x: and creation time.
    WSB will not shrink the diff area to less than 1/8 of Target volume size as we do not want to lose all past backups just to accommodate this one.
    For more detailed information, please refer to the article below:
    Windows Server Backup automatic disk usage management
    http://blogs.technet.com/b/filecab/archive/2011/03/14/windows-server-backup-automatic-disk-usage-management.aspx
    V. Backup, Restore and Disaster Recovery
    http://social.technet.microsoft.com/wiki/contents/articles/1846.v-backup-restore-and-disaster-recovery.aspx?Sort=MostUseful&PageIndex=1
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How much free space needed for client export

    Hi
    My PRD database size is 72 gb .how much free space should be needed for client export at os level. and how much time it will take tto do client export.

    > My PRD database size is 72 gb .how much free space should be needed for client export at os level
    about 8 - 10 % of the client size
    > . and how much time it will take tto do client export.
    Depends on how fast your system and your harddisks are.
    Markus

  • Phone Disk Shows Incorrect Free Space

    Hi all
    I am using Phone Disk on the Mac (makes the iPad/iPhone show up as a hard drive) and its showing the incorrect amount of hard drive capacity and free space.  It does this on both mine and my girlfriends iPhone and also on my iPad. For example, I know I have 10gb available on my 64gb iPad but Phone Disk shows me I have only 900mb free out of 1.5gb of hard drive space.  I have also installed iPhone Explorer and this also has the same problem.  I'm a little confused!
    Thanks
    Rich

    The available disk space reported in finder is totally wrong.
    Even if it accounts for the local snapshots. In my macbook air it shows 120 Available in finder which is just 1GB less than my SSD capacity.
    https://discussions.apple.com/thread/4467217

  • Tablespace used and free space size in 9i

    Hi,
    How to find the tablespace used space and tablespace free space in 9i.
    Normally i uses below query in 10g and 11g, but this query not working in 9i. Please help the query for 9i....
    SELECT /* + RULE */ df.tablespace_name "Tablespace",
    df.bytes / (1024 * 1024) "Size (MB)",
    SUM(fs.bytes) / (1024 * 1024) "Free (MB)",
    Nvl(Round(SUM(fs.bytes) * 100 / df.bytes),1) "% Free",
    Round((df.bytes - SUM(fs.bytes)) * 100 / df.bytes) "% Used"
    FROM dba_free_space fs,
    (SELECT tablespace_name,SUM(bytes) bytes
    FROM dba_data_files
    GROUP BY tablespace_name) df
    WHERE fs.tablespace_name (+) = df.tablespace_name
    GROUP BY df.tablespace_name,df.bytes
    UNION ALL
    SELECT /* + RULE */ df.tablespace_name tspace,
    fs.bytes / (1024 * 1024),
    SUM(df.bytes_free) / (1024 * 1024),
    Nvl(Round((SUM(fs.bytes) - df.bytes_used) * 100 / fs.bytes), 1),
    Round((SUM(fs.bytes) - df.bytes_free) * 100 / fs.bytes)
    FROM dba_temp_files fs,
    (SELECT tablespace_name,bytes_free,bytes_used
    FROM v$temp_space_header
    GROUP BY tablespace_name,bytes_free,bytes_used) df
    WHERE fs.tablespace_name (+) = df.tablespace_name
    GROUP BY df.tablespace_name,fs.bytes,df.bytes_free,df.bytes_used
    ORDER BY 4 DESC;
    Regards,
    Pravin

    hi,
    try this
    /* TOTAL, FREE AND USED SPACE IN TABLESPACES */ SET LINESIZE 100 COLUMN TABLESPACE FORMAT A15 select t.tablespace, t.totalspace as " Totalspace(MB)", round((t.totalspace-fs.freespace),2) as "Used Space(MB)", fs.freespace as "Freespace(MB)", round(((t.totalspace-fs.freespace)/t.totalspace)*100,2) as "% Used", round((fs.freespace/t.totalspace)*100,2) as "% Free" from (select round(sum(d.bytes)/(1024*1024)) as totalspace, d.tablespace_name tablespace from dba_data_files d group by d.tablespace_name) t, (select round(sum(f.bytes)/(1024*1024)) as freespace, f.tablespace_name tablespace from dba_free_space f group by f.tablespace_name) fs where t.tablespace=fs.tablespace order by t.tablespace;
    and you can have a look this thred. it will be hellp you
    query to check tablespace size and freespace
    regards,

  • After Yosemite Upgrade my Macbook shows incorrect free space available on Macintosh HD

    Hey all .... after doing the Yosemite upgrade on my Mid 2010 15" MacBook Pro it finished but when I double click on the Macintosh HD it shows 140.62 TB available ... kinda impossible since I only have a 500GB drive inside the laptop ...
    Methinks I found a bug ... not a huge deal as I know it's likely 140.62 GB free as opposed to TB ... just find it curious ...

    Hey - did you get anywhere with this?
    I have the exact same problem and it is definitely related to iTunes Match (I enabled 24 hours ago and the problem started immediately).
    In my case the actual phone displays the correct information (about 1.3gb free) but via iTunes (either connecting over wifi or over usb) it displays 19.4 gb free.
    In my case the difference is almost exactly the size of my iTunes library.
    Here is what I belive is happening (no fix yet).
    I have enabled iTunes Match on my phone but I have left the song files on the phone (i.e. I play files actually from the device and not from the cloud) . Now, when I connect to iTunes, iTunes sees merely that iTunes Match is enabled and therefore belives that the phone does not contain any downloaded music (or at least did not contain any at the point iTunes Match was enabled) and therefore displays a library-size chunk as free space.
    One fix which I suspect would work would be to delete my entire library from the iPhone, enable itunes Match and redownload the entire library from the phone. That however is not something I want to entertain at present.
    This has to be a bug at Apple's end - I hope they fix it soon!

  • HT1338 My mac Mini shows full hard disk when it is not really full. Shows some free space upon start up that gradually disappears without doing anything with the Mac.

    My Mac shows a full hard disk even though the disk is not full. There are several GB of unused space if I add the sizes of all the folders in the disk. Under the disk info window the free space shrinks to zero after a short period of time. It shows more space upon restart, but then it shrinks eventually to zero space available. is there a way to solve this?

    OmniDisksweeper can help you find what's hogging your disk space.

Maybe you are looking for