Client Side Detection

I choose detect flash player option when publishing my flash
files.
I am having trouble with modifying the html page that is
created when one chooses detect flash.
The code to detect flash is very large and is in the HEAD and
the BODY of the html page. I want to design my html page that my
flash file sits on and I am not sure how to do that with all that
code everywhere... any advice?
is there a simpler detection kit I can use that is just a cut
and paste in the HTML head?
I am creating my flash files to pubish in 7.

Similar Messages

How to detect the closure of browser window at the client side?

Hi,
Does anyone know how I can detect the closure of the browser window at the client side from the server side?
Please advise.
Damien

Basically you can't. People will suggest various Javascript things you could try, but they don't work reliably. So don't try, just make a design that doesn't require knowing that.

Detecting validation error on client side

If there is some error in validation on the field of ViewObject which is binded with a page, that component shows error message. I want to set some javascript fields on client side when a component gets error. How i can do that?

Hi,
for this you will need to catch the error in a custom error handler and call JavaScript from a managed bean (see chapter 5 of the Web Developer guide in the OTN documentation for JDeveloper and ADF).
Frank

Cutting Edge - Lightweight Client-Side Device Detection

WURFL.js is a lightweight device description repository that can improve the user experience in client-side intensive Web applications running on mobile and desktop browsers.
Read the article

I don't see "JavaFX" in this message, what it is doing in this forum?

4.9 SP2 - Zfd3.2 SP3 client side files

Does anyone know if it's possible to build in the updated client-side
zfd3.2 sp3 files into this client (to save a reboot when the clients
detect newer server files?)
I've done this with older clients, not sure about this version.

Yes, should work the same way.
Client 4.91 will be the first that will completely leave out Zenworks
components.
Regards, Kai Reichert
Novell Support Forum Sysop
There is an old saying that if a million monkeys typed on a million
keyboards for a million years, eventually all the works of Shakespeare
would be produced. Now, thanks to the Internet, we know this is not
true.

Applet without JMF installation at client side

hello,
I am trying developing an applet SIP phone based on Jain Sip Applet Phone( which originally can only deal with audio signal). But I found a big problem that I have to make every client install the JMF, however the clients hope there is no software to be installed locally.
In application, I can run it without JMF installation by copying all the dlls to system32 directory and add some related JMF source code into my own project. Or just simply put the jmf.property to the "lib" directory, which also works.
However, as for the applet, it dosen't that simple for the security thing. Here is the output in cosole:
@mediaManager.detectSupportedCodes- number of capture devices: 2
- name of the capture device: JavaSound audio capture
- format accepted by this AUDIO device: LINEAR, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed
- format accepted by this AUDIO device: LINEAR, 44100.0 Hz, 16-bit, Mono, LittleEndian, Signed
- format accepted by this AUDIO device: LINEAR, 22050.0 Hz, 16-bit, Stereo, LittleEndian, Signed
- format accepted by this AUDIO device: LINEAR, 22050.0 Hz, 16-bit, Mono, LittleEndian, Signed
- format accepted by this AUDIO device: LINEAR, 11025.0 Hz, 16-bit, Stereo, LittleEndian, Signed
- format accepted by this AUDIO device: LINEAR, 11025.0 Hz, 16-bit, Mono, LittleEndian, Signed
- format accepted by this AUDIO device: LINEAR, 8000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
- format accepted by this AUDIO device: LINEAR, 8000.0 Hz, 16-bit, Mono, LittleEndian, Signed
- name of the capture device: vfw:Microsoft WDM Image Capture (Win32):0
- format accepted by this VIDEO device: YUV Video Format: Size = java.awt.Dimension[width=352,height=288] MaxDataLength = 202752 DataType = class [B yuvType = 32 StrideY = 704 StrideUV = 704 OffsetY = 0 OffsetU = 1 OffsetV = 3
         - format accepted by this VIDEO device: YUV Video Format: Size = java.awt.Dimension[width=160,height=120] MaxDataLength = 38400 DataType = class [B yuvType = 32 StrideY = 320 StrideUV = 320 OffsetY = 0 OffsetU = 1 OffsetV = 3
         - format accepted by this VIDEO device: YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 50688 DataType = class [B yuvType = 32 StrideY = 352 StrideUV = 352 OffsetY = 0 OffsetU = 1 OffsetV = 3
         - format accepted by this VIDEO device: YUV Video Format: Size = java.awt.Dimension[width=320,height=240] MaxDataLength = 153600 DataType = class [B yuvType = 32 StrideY = 640 StrideUV = 640 OffsetY = 0 OffsetU = 1 OffsetV = 3
         - format accepted by this VIDEO device: YUV Video Format: Size = java.awt.Dimension[width=640,height=480] MaxDataLength = 614400 DataType = class [B yuvType = 32 StrideY = 1280 StrideUV = 1280 OffsetY = 0 OffsetU = 1 OffsetV = 3
java.lang.RuntimeException: No permission to capture from applets
-> Couldn't connect to audio capture device
java.lang.RuntimeException: No permission to capture from applets
-> Couldn't connect to video capture device
      I found that my applet can detect two device which is correct but has "no permission to capture from applets".
      In the progress of installation the JMF, and option is "permit recording from an applet". I read the source code, and found it dose the following works:
      if I choose "permit recording from an applet", then "allowCapture=1", and in "settingPanel.java" it dose:
     "boolean allowCapture = checkAllowCapture.getState();
      Registry.set("secure.allowCaptureFromApplets", new Boolean(allowCapture));"
      I want to do what the installation progress did to give permition to applet, however, when I do the following:
       private static final String PROP_ALLOW_CAPTURE_FROM_APPLETS
        = "secure.allowCaptureFromApplets";
       Registry.set(PROP_ALLOW_CAPTURE_FROM_APPLETS, new Boolean(true));
       Registry.commit();
      in my project , it throws exception like this: "Failed to initially commit JMFRegistry. Ignoring err.java.lang.SecurityException: commit: Permission denied"
      The code which i thought could give applet the rights is denied.
      Till now, I have also read some similar questions in different forums, but there is no good answer.
      Can you help me? Is there any possibility to run the applet without installation on the client side ? Is my method right? If not, how should I do?

xljiayuan wrote:
..I am trying developing an applet SIP phone based on Jain Sip Applet Phone( which originally can only deal with audio signal). If this is pure audio, can it be done using JavaSound?
..But I found a big problem that I have to make every client install the JMF, however the clients hope there is no software to be installed locally.To run an applet, the applet needs to be 'installed' on the user machine. Same with anything else.
BTW - have you investigated JavaFX? It is effectively the replacement for JMF, and possibly has a better end-user experience than trying to install JMF.
However, as for the applet, it dosen't that simple for the security thing. Here is the output in cosole:
in my project , it throws exception like this: "Failed to initially commit JMFRegistry. Ignoring err.java.lang.SecurityException: commit: Permission denied"Is your applet digitally signed? If not, it has no hope of intercepting sound on the client. It is that simple.
Imagine if you visited a web page with a 1px x 1px applet (effectively invisible) that could hear everything you say, and transmit it back to the server. Sun is not about to allow that, unless the end-user has granted the applet extended permissions.

ADF validator or JavaScript for client side validation ?

using JDev and ADF 11g
Problem description : To apply validations such as date range check, pattern matching, maxlength etc.. on ADF Faces Components.
Solution 1: Use ADF validator such as Reg Expr validator, Max Length validator
Souliton 2: Write Javascript code for validating the component's value at cleint side.
When using ADF Validator for such type of validation checking, a request is send to the server for processing (additional overhead) . However we can do such validations with javaScript functions without the need to interact with the server. So, what benefit does ADF Validator serves when one needs to implement such validations ?
Please share your views...

H,
afaik, client side validation in ADF Faces suppresses server round trips if a validation error is detected on the client. Only if no problem is found, the server side validation is challenged upon submit (so no extra round trip for validation). Shay is absolutely correct. JavaScript is a convenience but never a solution.
Here's how to create a custom validator with a client and server side implementation : http://download.oracle.com/docs/cd/E15523_01/web.1111/b31973/af_validate.htm#BABEIIDD
Frank

GPO on Client side VPN

Hi,<o:p></o:p>
I am facing problem while updating Group policy to client side VPN user system, I have opened default ports related to GPO, Still GPO is not getting updated. Microsoft article advised that dynamic
ports range 49152 - 65535 need to open. Due to security concern we unable to open these huge range of ports. Finally GP update command is working by opening these two ports 49159 and 49157. but GP update /force command is still not working. <o:p></o:p>
Kindly advice which ports need to be opened for GP update /force.<o:p></o:p>
Secondly I need to get VPN connected before user logged in. otherwise i hope GP update command will not serve the purpose. Software need to be assigned to the user by using GP update from the
update server/domain controller.<o:p></o:p>
Please advise if there is any solution for this case.<o:p></o:p>
Regards,<o:p></o:p>
Raj. <o:p></o:p>

Hi JeraldRaj,
If all your intranet computer get GPO properly, it may your VPN computer using the Slow Link GPO , When your client is applying its Group Policies and it detects that the
available bandwidth between it and the Domain Controller is less than 500 kb (default value), it will only download and apply those settings within the GPO that are considered mandatory.
The settings that are not downloaded when a slow link is detected include the following:
•Disk Quota
•Scripts
•Folder Redirection
•Software Installation
•Wireless Network (IEEE 802.11) Policies
•Wired Network (IEEE 802.3) Policies
•Internet Explorer Maintenance Extension
The related aritlce:
GPOs and Slow Link Detection
http://blogs.technet.com/b/musings_of_a_technical_tam/archive/2012/02/27/gpos-and-slow-link-detection.aspx
“Configure slow-link mode” policy on Vista for Offline Files
http://blogs.technet.com/b/askds/archive/2009/02/11/configure-slow-link-mode-policy-on-vista-for-offline-files.aspx
The related KB:
Specifying Group Policy for Slow Link Detection
http://technet.microsoft.com/en-us/library/cc781031(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to generate rule log on client side

I am looking for a solution where I could generate a rule log and make it available on client side. I know generating a log during consolidation and save it on server. However, I want to make it available on client side.
I have created four scenarios in HFM application, namely -
1. ACTUAL_REPORTING - To capture TB data and use it for reporting
2. ACTUAL_ICP - To capture ICP data and run custom business rule as per requirement
3. ACTUAL_ADDINPUT - To capture additional memorandum inputs
During consolidation,data is copied from ACTUAL_ICP and ACTUAL_ADDINPUT to ACTUAL_REPORTING. However, problem is that user should consolidate ACTUAL_ICP AND ACTUAL_ADDINPUT scenarios first. If they miss executing the consolidation in these scenarios, then the data copied would be wrong. Just as to ensure this, there's a provision is HFM to check calculation status in rule file and looking at that, calcuation could be stopped and a message could be sent to the user. But delimma is, how to report the same on the user side.
Possible solution that I could have thought are -
1. To generate a rule log and post the same to the client, but how to do this? As path of the rule log could be of the server only (that is C:\Hyperion\Logs\Rule)
2. To generate a rule log and pop a web page terminating consolidation, but how to do this?
3. To raise an error from the rule file and direct it to the system messages, but how to to this?
Please advice and any further clarification is required please contact me.
Thanks & Regards,
Mustafa

You can define the output folder as a share, which has already been mentioned. I strongly advise against implementing any solution that in production will regularly generate an external file.
1) The output file is generated by the DCOM user. If you want this user to generate a file in a specific location, it must be writeable by the DCOM user, and readable by the intended human user. Make sure both NTFS and share level permissions on the target file and its containing folder consider this. Latency for the file write can degrade performance.
2) Most HFM implementations have two or more HFM application servers. You have no control over which server will execute the file, and also no control over what happens if two or more servers try to write to the same file. You can create a process which causes HFM to become single threaded if every time Sub Calculate for any entity on any server needs to open a single file. This is because the file object is single threaded. It could be multi-threaded if you write out to a database, but certainly far more complex.
3) Wait state: while as in #2, this can single thread the process, and you have to consider whether your process will error out during moments when another process has access to the file, or if you will ignore that and simply proceed. This can have a significant impact on performance time if you decide to wait until the file becomes available.
While I have done implementations where the overall solution required combining data across multiple scenarios, I consistently find this a cumbersome, error-prone, and poorly performing approach. For this reason, I always try to keep all of the data required in a single scenario. This is one key reason why the "DataSource" or "DataType" (or whatever you call it) approach is so popular and successful.
Finally, you cannot write to the HFM system messages. You can, on the other hand, use Calc Manager to write out to a system log.
--Chris

Client side event for h:outputText... and other JSF component

Hello friends...
I need client side (to use Java script ) event for change in <h:outputText /> or <h:inputText...>.
I want to open a popup window when there is a change in there. I donot want to use onblur() for this. Is there any thing for achiev it.
Thanks.
Regard
Roshan Lal ( I don't know why there is "DOG" display in LIST )
:-)

Hi Jacek,
Unfortunately I think you may be stuck extending Renderer. Another possibility is creating your component via a template, which will be available in JSF 2.0. However, as JSF 2.0 won't be out for a while... you can use JSFTemplating in the meantime:
http://java.sun.com/developer/technicalArticles/J2EE/jsf_templating/
http://www.theserverside.com/tt/articles/article.tss?l=JSFTemplateComponent
Good luck!
Ken Paulsen
https://jsftemplating.dev.java.net

How can i load file into database from client-side to server-side

i want to upload file from client-side to server-side, i use the following code to load blob into database.
if the file is in the server-side, it can work, but if it in the client-side, it said that the system cannot find the file. i think it only will search the file is in the server-side or not, it will not search the client-side.
how can i solve it without upload the file to the server first, then load it into database??
try
ResultSet rset = null;
PreparedStatement pstmt =
conn.prepareStatement ("insert into docs values (? , EMPTY_BLOB())");
pstmt.setInt (1, docId);
pstmt.execute ();
// Open the destination blob:
pstmt.setInt (1, docId);
rset = pstmt.executeQuery (
"SELECT content FROM docs WHERE id = ? FOR UPDATE");
BLOB dest_lob = null;
if (rset.next()) {
dest_lob = ((OracleResultSet)rset).getBLOB (1);
// Declare a file handler for the input file
File binaryFile = new File (fileName);
FileInputStream istream = new FileInputStream (binaryFile);
// Create an OutputStram object to write the BLOB as a stream
OutputStream ostream = dest_lob.getBinaryOutputStream();
// Create a tempory buffer
byte[] buffer = new byte[1024];
int length = 0;
// Use the read() method to read the file to the byte
// array buffer, then use the write() method to write it to
// the BLOB.
while ((length = istream.read(buffer)) != -1)
ostream.write(buffer, 0, length);
pstmt.close();
// Close all streams and file handles:
istream.close();
ostream.flush();
ostream.close();
//dest_lob.close();
// Commit the transaction:
conn.commit();
conn.close();
} catch (SQLException e) {

Hi,
Without some more details of the configuration, its difficult to know
what's happening here. For example, what do you mean by client side
and server side, and where are you running the upload Java application?
If you always run the application on the database server system, but can't
open the file on a different machine, then it sounds like a file protection
problem that isn't really connected with the database at all. That is to
say, if the new FileInputStream (binaryFile) statement fails, then its not
really a database problem, but a file protection issue. On the other hand,
I can't explain what's happening if you run the program on the same machine
as the document file (client machine), but you can't write the data to the
server, assuming the JDBC connection string is set correctly to connect to
the appropriate database server.
If you can provide some more information, we'll try to help.
Simon
null

Print text file to client side printer

Hi all,
I have a character mode report which will print to a client side dot matrix printer in 6i. After converted to 10g, we cannot print to the client side printer (because we don't want to map so many print queue from the AS).
So, I try to generate the report to a text file, then use webutil to transfer the txt file to the client PC, and then use Client_HOST to call the window PRINT command to print the text file to the client side printer.
I have test this is successful, however, when I try to do the same thing to a report with Vietnam character, then it is not.
The print request is sent to the printer, but the printer have no response.
But that file can be print successfully if I open in Notepad and then print manually.
I try to use window TYPE command and COPY command, but still have no luck.
Can anyone give me some suggestions for this....
Thanks!

Qiu (guest) wrote:
: In the browser/applet, the default "print" button can only
print
: screen to local printer, not the data I want. Use Report
server,
: I can't directly print to client side printer. Is there a way
to
: print data to local printer after press a button?
Are u using Run_Product function in the when button pressed,
then u can specify the format in which u want the output, option
available are HTML and PDF, report server runs the report on the
server and sends the output to the client machine. On the client
machine u have to open the file and print it. I cannot print the
report itself on the client machine.
Try.
Sailesh
null

How to Print Crystal Report without any dialog message on the client side

Hi!
I've read too much questions like this, but i can't find any answer.
How can i print a report on the client side directly?
I have three buttons, "Generate Report", "Generate PDF", "Print".
I want when the "Print" button was clicked, automaticaly the report is printed using default printer, like PrintToPrinter function, but in the client side.
Thanks!

If you search for previous posts about this, you will see many posts saying not possible. If this functionality was possible, you could essentially have a page that would send something to a clients printer just by visiting the page, how bad of security hole would that be?

Crystal report printing in client side

Hi ...
I have using asp.net web app with crystal report version 10.5.3700.0
I have uploaded the project and database in the below link. Check out.
http://www.2shared.com/file/vHTSGl13/ASPnet_Webapp_using_CR_Rpt_Pri.html
http://i52.tinypic.com/2rdds7d.jpg
I have few requirement in the crytsal report asp,net page:-
1) If user click Print button of crystal report viewer toolbar then it goes to PDf then its show me all of my pages instead of showing me the current page on which i click print.
2) I want to use client side print..if user click on a my print button then i need to show print dailogue like image above in that if user click print then i need to print that current page.. let us consider im viewing I3 Invoice number using Crysatl report viewer Navagition then it show me as 3/7 in toolbar if user click on my print button then i need to print the page 3 only.. coz user clicked print on Page3.
3)My asp.net web app is in Hosting server if user click my print button then i need to show client print dailogue and it will show my cleint connected printer. Here crytsal report toolbar and other things should be hide. It should be like what we have designed in crystal report that alone should be get printed.
4) One more thing i want is if user gives I4 invoice no. in my textbox1 then click view report button then it will show that Invoice Report now its shows two pages, here if user click print then i need to print two pages coz it has two pages...
Please do a code using my webapp which is above and waiitng for your codes..
Thank you
Note: please do a code so that i can know, i already visited some of the website like http://aspalliance.com/ i didt undertstand how to do so im posting here to get a code.

*i tried this also but it show me the same only hosting server printer not a client side printer*
if (System.Drawing.Printing.PrinterSettings.InstalledPrinters.Count > 0)
            foreach (String myPrinter in System.Drawing.Printing.PrinterSettings.InstalledPrinters)
                cboCurrentPrinters.Items.Add(myPrinter);
            cboCurrentPrinters.SelectedIndex = 0;
        //For printers exposed to System account as per MS Kbase
        //http://support.microsoft.com/default.aspx?scid=kb;en-us;184291
        //Look to HKEY_USERS\.Default\Software\Microsoft\Windows NT\CurrentVersion\Devices
        Microsoft.Win32.RegistryKey mySystemPrinters =
                Microsoft.Win32.Registry.Users.OpenSubKey(@".DEFAULT\Software\Microsoft\Windows NT\CurrentVersion\Devices");
        foreach (String defaultPrinters in mySystemPrinters.GetValueNames())
            cboDefaultPrinters.Items.Add(defaultPrinters);
        if (cboDefaultPrinters.Items.Count > 0)
            cboDefaultPrinters.SelectedIndex = 0;
help me in this.. its very urgent needed..

Problem in creating client side PDF with image using flex and AlivePD

I need a favor I am creating client side PDF with image using flex and AlivePDF for a web based application. Images have been generated on that pdf but it is creating problem for large size images as half of the image disappeared from that pdf.I am taking the image inside a canvas . How do i control my images so that they come fit on that pdf file for any image size that i take.
Thanks in advance
Atishay

I am having a similar and more serious problem. It takes a
long time to execute, but even attaching a small image balloons the
pdf to 6MB plus. After a few images it gets up to 20MB. These are
100k jpeg files being attached. The resulting PDF is too large to
email or process effectively. Does anyone know how to reduce
size/processing?

Client Side Detection

Similar Messages

Maybe you are looking for