Client Site info on Dreamweaver

Every once in awhile Dreamweaver drops ALL my clients site
info after entering 40 + client sites & I have to re-enter them
all...it's a real pain. Anyone else have this issue? and can it be
fixed.

If you have increased the minimum font size then try the default setting "none" as a high value can cause such issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Similar Messages

Importing site info from Dreamweaver 8 to CS3

I am thinking about moving from Dreamweaver 8 to Dreamweaver
CS3. I have roughly 10 sites that I edit and update. I am wondering
if there is a way to import the site information from 8 to CS3
(meaning the FTP info, folders, etc).
Thanks for the help,
Joe

I have a similar issue. I had CS4 installed on my machine with about 20 sites/ftp info etc saved into it. My computer had a complete meltdown and I had to rebuild the computer. I have installed CS4 onto the new hard drive and I was able to save the old hard drive (it was unstable though and safer to start fresh). Is it possible to have my installation of CS4 grab the site information from a different drive on my machine? I was hoping it would just find it when I installed the software, but no such luck.
I tried "importing sites" but I could find any .ste files that it was looking for. Any help would be greatly appreciated. It will take a long time to re-input all of those sites.

Light Room import site info from Dreamweaver.

What is the best way to upload a lightroom gallery? directly to the website or export it to the folder where Dreamweaver stores the site and then Sync?

It's good to use Dreamweaver so you familiarize yourself with FTP and the folder structure of your web space. After then, you're in a better position to use LR's upload, knowing exactly where it's sending the stuff, or being able to look at your web space and see what's gone wrong.
Secondly, exporting to your hard drive allows you to review the gallery in your browser and pick up any errors, typos, wrong pics etc.

Recovering Dreamweaver 3 preference and site info, ultimately migrating to cs5.5 on Windows XP

I had a hard drive failure in windows xp and have reinstalled windows xp and dreamweaver 3. I have a backup of all my dreamweaver 3 files from the old machine, for example &sitename.dws, &sitename Changed.txt, &sitename Live.dws, &sitename Changed.txt. I would like to have all my preferences, ftp info, etc. restored but cannot find any documentation on how to do that in Dreamweaver 3.
I tried replacing the following files with the backup versions:
C:\Progam Files\Macromedia\Dreamweaver3\Configuration\SiteCache
C:\Program Files\Macromedia\Dreamweaver3\Configuration\SourceFormat.txt
as these were the only files I saw that appeared to have been modified by using Dreamweaver on the XP machine before the drive failure.
Is there any Dreamweaver 3 documentation about the names of preferences files, site files, and how to replace the default install files with backed up versions?
All help is sincerely appreciated as I have not been able to figure this out on my own. I considered just replacing all the DW install files with my backup, but that would probably mess up the registry and I can't chance that.
Ultimately I will be moving to CS5.5--if I ever get my backed up information into my newly installed Dreamweaver 3, is there a way to migrate those preferences, site info, etc. to CS5.5?

Murray 'ACP', you are correct--DW3 does not have the option to back up to *.ste files, so I believe that pzciena is correct in stating that site information in DW3 is found in the registry and I can't recover that using files from my drive backup. The reason I asked the question is because I am having trouble when using the FTP "Put" function to FTP files over to my website. The "Put" operation creates a subdirectory to the root file on the host.
The host directory is named "web" and I specify /web in my dreamweaver remote host site definition. The "Put" operation creates a subdirectory using the same name as my local files subdirectory. That is, on the local side, the file I am "put"ting is in subdirectory /hostsave and when it FTPs to the remote side, it creates a directory named "hostsave". I deleted that directory on the remote side and tried FTPing a second time and it created the directory again. This does not happen if I use Ipswitch to FTP the file, but I would prefer using the file transfer within dreamweaver since it checks to make sure I'm ftping all the image files in the .html file I'm PUTting.
I obviously have not re-created something correctly in redefining my site. ????

Dreamweaver does not save site info

I have a problem which started a couple weeks ago... DW CS4 doesn´t save my site info, every time I quit and start DW, my username and password in site info is missing. I uninstalled and installed DW again but no, doesn´t help. Any ideas?

Thank you for your answer. I did that, I also deleted the whole configuration folder but it didn´t help. It is weird... DW remembers some sites info, but not all.
For this particular site, I have used the Incontext editing and that has also caused some problems: A client tried to edit the page and message poped up, The operation could not be performed because there is insufficient disk space or the file write permission is not granted. Next time it said: You cannot edit or duplicate this page, the page does not appear to contain any editable regions. When I went to the page, it said that the page doctype is not valid...
And there is disk space, editable reagions and the page doctype is transitional 4. 01... I don´t know if this has something to do with this site info problem, but I guess that is another issue.
Any more ideas?

Email activity not working on Clients site

Hi,
I created a Bpel process that contains an email activity, It works fine when I am connected to the Oracle network through VPN and while i am in the Oracle office.
But when I am at the clients site or connected through VPN, it doesnt work at all.
when I configure my ns_emails.xml to Oracle's info, it works fine but when its configured to clients info, it doesnt work.
I have configured ns_emails.xml and wf_config.xml
This is my ns_emails.xml when I am at the clients site._
note:_ Since I am not using the Default domain for deployment, I changed the <Name> under <EmailAccount> to cdmsd since I am deploying my Bpel processes to the cdmsd domain.
^<EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"^
^ EmailMimeCharset=""^
^ NotificationMode="EMAIL">^
^ <EmailAccount>^
^ *<Name>cdmsd</Name>*^
^ <GeneralSettings>^
^ <FromName>Oracle BPM</FromName>^
^ <FromAddress>[email protected]</FromAddress>^
^ </GeneralSettings>^
^ <OutgoingServerSettings>^
^ <SMTPHost>mail.co.la.ca.us</SMTPHost>^
^ <SMTPPort>25</SMTPPort>^
^ </OutgoingServerSettings>^
^ <IncomingServerSettings>^
^ <Server>mail.co.la.ca.us</Server>^
^ <Port>25</Port>^
^ <Protocol>SMTP</Protocol>^
^ <UserName>[email protected]</UserName>^
^ <Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">Temp123</Password>^
^ <UseSSL>true</UseSSL>^
^ <Folder>Inbox</Folder>^
^ <PollingFrequency>1</PollingFrequency>^
^ <PostReadOperation>^
^ <MarkAsRead/>^
^ </PostReadOperation>^
^ </IncomingServerSettings>^
^ </EmailAccount>^
^</EmailAccounts>^
and for wf_config.xml I only add one line_
^<property name="oracle.bpel.services.notification.publisher_interval" value="1" />^
I dont understand why its not working while I am on the clients site ?? any ideas ??
could it be a network issue on their side ??

I pinged my email server and I got the following:
{size:12pt}
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),{size}
Edited by: user9976478 on Jan 30, 2009 2:09 PM

Using BC to manage multiple client sites

Hi,
I'm a freelance designer who has recently started delving into the world of web design due to the high demand from my clients!
I am very interested in the Muse and BC software packages from Adobe and like the way that they interact with eachother to enable more interactive features on websites.
I am really struggling to get my head around how BC works though?? As mentioned before I have multiple clients that have recently asked me to create/redesign their webistes for them and all of my clients have asked for feature rich websites that either allow them to update certain pages themselves (news pages, menu pages etc.) and add in features that allow for e-commerce/shopping carts.
I know that combining both Muse and BC will allow me to achieve all of these features but I need to know how I can get BC to manage all of the sites.
Do I only need a copy of BC myself so I can manage all of the sites in one place or will I need to set up an account for each seperate site and log into each one to manage the modules etc.?
My ideal scenario would be as follows:
I have a copy of BC on my machine that I can use to set up each site and manage it. I can then give each individual client login details for their site so they can add/amend content on specific pages that I unlock for them. The clients login details also give them access to the site analytics, create e-shots, update the e-commerce side of the site.
Each client would then pay the relevant monthly subscription to host their site on BC depending on what level of interactivity they require.
As I said, I'm struggling to work out how BC works in terms of managing multiple sites so any suggestions/guidance would be great!
Kind Regards
Dan

Hi Dan,
Firstly you need to understand Muse in the scope of website design & development and also with it and BC.
Muse is a means for graphic designers to step into the web would and get them going. Its concept as a point and click interface, while built very well from a good team by its very nature is only a stepping stone and basic.
With that and how it works with BC as well it is only the lower end of what you can do with it and BC. So proper implemented eCommerce etc you simply can not create properly and use and utlise other BC features.
It does not teach you the javascript etc you need to take a full on BC site to where it needs to be.
Also while it has been improved the way you develop in Muse and then clients updating content via the admin (as they should being a CMS) it is not the smoothest affair.
With your next part of your post - To manage many clinets in BC you should look to become a partner. You have access to the partner portal and can manage client sites more easily and access some cool tools to help and aid with that. You get a free partner site for yourself you can use as your business site.
Lots of info on BC is here:
http://helpx.adobe.com/business-catalyst/topics.html

About transfering master data to mobile client site on extract....

Hi everyone,
I want to flow the master data (i.e country, region, title specific data which is not user specific etc..)
from CRM to Mobile client for perticular site using SMOEAC.
what happened is first time when I have done whole conntrans I got 8000 messages for a perticular mobile client site.
after 2 months when i configured a new machine for same cilent and done complete extract using smoeac the master data is not flown( messages where around 3000 only).
this means after doing complete extract on mobile site the complete data is not flowing....
Please suggest if you come across some like this...
regards,
Dhanraj.

Hi,
you can find the load objects by searching for the tables they contain in tables "smofmaptab" & "smoftables".
Another method is extracting all the info out of the CRM system. Try implementing the following program in your CRM system. It will extract all data of the objects in an XML file and will create an accompanying CSS file to view the data. Open the XML file in a browser and search for your tables in it.
*& Report ZMVGTEST12                                                  *
*& Written by Michael Van Geet                                         *
*& The report extracts all object data to an XML file                  *
REPORT zmvgtest12                              .
TYPES: BEGIN OF t_objects,
         objname    LIKE smofobject-objname,
         objclass   LIKE smofobject-objclass,
         text       LIKE smofobjctt-text,
         r3tabname LIKE smoftables-r3tabname,
         sfatabname LIKE smofmaptab-sfatabname,
       END OF t_objects,
       BEGIN OF t_systems,
         objname    LIKE smofobject-objname,
         sourcestid LIKE smofinicon-sourcestid,
         targetstid LIKE smofinicon-targetstid,
       END OF t_systems,
       BEGIN OF t_data,
         data(500),
       END OF t_data.
DATA: it_objects TYPE STANDARD TABLE OF t_objects,
      is_objects TYPE t_objects,
      is2_objects TYPE t_objects,
      it_systems TYPE STANDARD TABLE OF t_systems,
      is_systems TYPE t_systems,
      it_data TYPE STANDARD TABLE OF t_data,
      is_data TYPE t_data,
      h_lines TYPE i,
      h_file TYPE string.
RANGES: r_objclass FOR smofobject-objclass.
SELECTION-SCREEN BEGIN OF BLOCK blok1 WITH FRAME TITLE text-001.
PARAMETERS: p_obj RADIOBUTTON GROUP grp1,
            p_cus RADIOBUTTON GROUP grp1,
            p_con RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK blok1.
SELECTION-SCREEN BEGIN OF BLOCK blok2 WITH FRAME.
PARAMETERS: p_extr AS CHECKBOX DEFAULT 'X',
            p_file(50) DEFAULT 'c:\temp\'.
SELECTION-SCREEN END OF BLOCK blok2.
IF NOT p_obj IS INITIAL.
REFRESH r_objclass.
r_objclass-sign = 'I'.
r_objclass-option = 'NE'.
r_objclass-low = 'CUSTOMIZING'.
APPEND r_objclass.
r_objclass-low = 'CONDCUSTOMIZING'.
APPEND r_objclass.
r_objclass-low = 'CONDITIONS'.
APPEND r_objclass.
ELSEIF NOT p_cus IS INITIAL.
REFRESH r_objclass.
r_objclass-sign = 'I'.
r_objclass-option = 'EQ'.
r_objclass-low = 'CUSTOMIZING'.
APPEND r_objclass.
ELSE.
REFRESH r_objclass.
r_objclass-sign = 'I'.
r_objclass-option = 'EQ'.
r_objclass-low = 'CONDCUSTOMIZING'.
APPEND r_objclass.
r_objclass-low = 'CONDITIONS'.
APPEND r_objclass.
ENDIF.
SELECT obobjname obobjclass obttext tabr3tabname map~sfatabname
            FROM ( ( smofobject AS ob JOIN smofobjctt AS obt
                      ON obtobjname EQ obobjname )
                 JOIN smoftables AS tab ON tabobjname EQ obobjname )
                 JOIN smofmaptab AS map ON mapobjname EQ obobjname
                  AND mapr3tabname EQ tabr3tabname
            INTO TABLE it_objects
            WHERE ob~objclass IN r_objclass
              AND obt~spras   EQ 'E'.
SELECT obobjname insourcestid in~targetstid
        INTO TABLE it_systems
        FROM smofobject AS ob JOIN smofinicon AS IN
             ON inobjname EQ obobjname
        WHERE ob~objclass IN r_objclass.
PERFORM xlmdoc TABLES it_data
                USING 'open'.
LOOP AT it_objects INTO is_objects.
CLEAR is2_objects.
is2_objects = is_objects.
AT NEW objname.
    WRITE:/ is2_objects-objname COLOR 1,
            is2_objects-objclass COLOR 1,
            is2_objects-text COLOR 1.
    PERFORM open_objects TABLES it_data
                         USING is2_objects.
    WRITE:/30 'SYSTEMS:'.
    PERFORM xlmdoc TABLES it_data
                    USING '<SYSTEMMAPPING>'.
    LOOP AT it_systems INTO is_systems
         WHERE objname EQ is_objects-objname.
      WRITE:/40 is_systems-sourcestid,
                is_systems-targetstid.
      PERFORM add_system TABLES it_data
                         USING is_systems.
    ENDLOOP.
    PERFORM xlmdoc TABLES it_data
                    USING '</SYSTEMMAPPING>'.
    PERFORM xlmdoc TABLES it_data
                    USING '<TABLEMAPPING>'.
    WRITE:/30 'TABLES:'.
ENDAT.
WRITE:/40 is2_objects-r3tabname COLOR 5,
            is2_objects-sfatabname COLOR 5.
PERFORM add_table TABLES it_data
                    USING is2_objects.
AT END OF objname.
    PERFORM xlmdoc TABLES it_data
                    USING '</TABLEMAPPING>'.
    PERFORM xlmdoc TABLES it_data
                    USING '</OBJECT>'.
ENDAT.
ENDLOOP.
PERFORM xlmdoc TABLES it_data
                USING '</OBJECT_OVERVIEW>'.
IF NOT p_extr IS INITIAL.
CLEAR h_file.
CONCATENATE p_file 'objects.xml' INTO h_file.
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
      filename = h_file
    CHANGING
      data_tab = it_data.
PERFORM cssdoc TABLES it_data.
CLEAR h_file.
CONCATENATE p_file 'xml.css' INTO h_file.
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
      filename = h_file
    CHANGING
      data_tab = it_data.
ENDIF.
*&      Form open_objects
      text
     -->P_IS2_OBJECTS text
     -->P_IT_DATA text
FORM open_objects TABLES   p_data
                   USING    p_object STRUCTURE is_objects.
CLEAR is_data.
is_data-data = '<OBJECT>'.
APPEND is_data TO p_data.
CLEAR is_data.
CONCATENATE '<TITLE>' p_object-objname '</TITLE>' INTO is_data-data.
APPEND is_data TO p_data.
CLEAR is_data.
CONCATENATE '<DESCRIPTION>' p_object-text '</DESCRIPTION>' INTO is_data-data.
APPEND is_data TO p_data.
CLEAR is_data.
CONCATENATE '<CLASS>' p_object-objclass '</CLASS>' INTO is_data-data.
APPEND is_data TO p_data.
ENDFORM.                    " open_objects
*&      Form add_system
      text
     -->P_P_DATA text
     -->P_IS_SYSTEMS text
FORM add_system TABLES   p_data
                 USING    p_systems STRUCTURE is_systems.
CLEAR is_data.
is_data-data = '<SYSTEM>'.
APPEND is_data TO it_data.
CLEAR is_data.
CONCATENATE '<SOURCESYSTEM>' p_systems-sourcestid '</SOURCESYSTEM>'
             INTO is_data-data.
APPEND is_data TO p_data.
CLEAR is_data.
CONCATENATE '<TARGETSYSTEM>' p_systems-targetstid '</TARGETSYSTEM>'
              INTO is_data-data.
APPEND is_data TO p_data.
CLEAR is_data.
is_data-data = '</SYSTEM>'.
APPEND is_data TO it_data.
ENDFORM.                    " add_system
*&      Form add_table
FORM add_table TABLES   p_data
                USING    p_objects STRUCTURE is_objects.
CLEAR is_data.
is_data-data = '<TABLE>'.
APPEND is_data TO it_data.
CLEAR is_data.
CONCATENATE '<SOURCETABLE>' p_objects-r3tabname '</SOURCETABLE>'
              INTO is_data-data.
APPEND is_data TO p_data.
CLEAR is_data.
CONCATENATE '<TARGETTABLE>' p_objects-sfatabname '</TARGETTABLE>'
              INTO is_data-data.
APPEND is_data TO p_data.
CLEAR is_data.
is_data-data = '</TABLE>'.
APPEND is_data TO it_data.
ENDFORM.                    " add_table
*&      Form xlmdoc
FORM xlmdoc TABLES   p_data
             USING    p_action.
CASE p_action.
    WHEN 'open'.
      CLEAR is_data.
      is_data-data = '<?xml version="1.0"?>'.
      APPEND is_data TO p_data.
      CLEAR is_data.
      is_data-data = '<?xml-stylesheet href="xml.css" type="text/css" ?>'.
      APPEND is_data TO p_data.
      CLEAR is_data.
      is_data-data = '<OBJECT_OVERVIEW>'.
      APPEND is_data TO p_data.
    WHEN OTHERS.
      CLEAR is_data.
      is_data-data = p_action.
      APPEND is_data TO p_data.
ENDCASE.
ENDFORM.                    " xlmdoc
*&      Form cssdoc
      text
     -->P_IT_DATA text
FORM cssdoc TABLES   p_data.
REFRESH it_data.
is_data-data = 'OBJECT'.
APPEND is_data TO p_data.
is_data-data = 'TITLE{text-decoration: underline;font: bold; width: 180px; float: left; }'.
APPEND is_data TO p_data.
is_data-data = 'DESCRIPTION{margin-left: 2px; width: 150px;float: left;}'.
APPEND is_data TO p_data.
is_data-data = 'CLASS'.
APPEND is_data TO p_data.
is_data-data = 'SYSTEMMAPPING{background-color: #BBB;margin-left: 2px; border: inset; width:200px; float: left;padding: 2px;font-size:0.7em; }'.
APPEND is_data TO p_data.
is_data-data = 'SYSTEM'.
APPEND is_data TO p_data.
is_data-data = 'SOURCESYSTEM'.
APPEND is_data TO p_data.
is_data-data = 'TARGETSYSTEM'.
APPEND is_data TO p_data.
is_data-data = 'TABLEMAPPING{background-color: #AAA;margin-left: 2px; border: inset;width: 370px;float: left;padding: 2px;font-size:0.7em; }'.
APPEND is_data TO p_data.
is_data-data = 'TABLE'.
APPEND is_data TO p_data.
is_data-data = 'SOURCETABLE'.
APPEND is_data TO p_data.
is_data-data = 'TARGETTABLE'.
APPEND is_data TO p_data.
ENDFORM.                    " cssdoc
Michael.

Site info disappears

I am running Dreamweaver 8.0.1 on a PC/XP. Suddenly, DW no
longer maintains the remote info for all of my configured sites. It
retains everything except the login name and password, even though
the save info checkbox is ticked. Once I re-enter the info, DW ftp
works during the current session. If I quit and restart DW, the
login and password are missing again.
This is a really frustrating bug. Does anyone have a
fix?

Which DW? Did you ever back up your site definitions with
Site Manager >
Export?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"mac_trom" <[email protected]> wrote in
message
news:e66fp1$5et$[email protected]..
> I'm running on Mac OSX10.4 and today all my site info is
gone! I'm talking
> well
> over 30 sites, and to try to recreate them will cost me
hours of
> productive
> time. What happened and where can I find the backup
info?
>
> And no, I do not have IE7 beta installed.
>

Hosting Client Sites with Business Catalyst?

Do I have to HOST potential client sites with Business Cataylst in order for the forms widget to work? I am very excited about this tool but this is one major issue that I need clarity on that plan old experience and practice will not answer. I have already used form entry sites that give you the code, but it just isnt MUSE! I get redirected to their sites and makes the overall site look less authentic... Can someone provide a little insight please!!! I'd call in to 1800 MUSE HELP if I could. Thanks!

Yes, the sites need to be hosted with Business Catalyst in order for the forms widget to work out of the box.
Users have also reported success adding contact forms to their site using Adobe FormsCentral, Jotform, or Wufoo and inserting them via Object > Insert HTML.
Read more about Muse's Contact form widgets here - http://www.adobekb.com/adding_contact_forms.html
"If you want to create and style forms with Muse and then upload your site to a different web hosting service, the forms will display as you designed them, but they will not function. If you have experience working with code, you can use Muse to export your site and then open the files in an HTML editor. Update the source code of the form to make it compatible with the form processing technology used by your hosting provider before you upload the files to their server."
Thanks,
Vinayak

Please help I have to update my clients site tonight I have been using muse subscription since Nov 19, 2012 An unexpected error occurred.An unexpected error occurred processing your request. Please try again later.I-2

please help I have to update my clients site tonight I have been using muse subscription since Nov 19, 2012 An unexpected error occurred.An unexpected error occurred processing your request. Please try again later.I-2

Hi Carey,
Please refer to this trouble-shooting guide for the error that you are getting, An unexpected error occurred I -200
- Abhishek Maurya

My Default Website Folder & Manage Sites info Not Appearing

The pop up box on the right with the Files, Assets, and Snippets has somehow changed my default "AAA_WebSite" folder under the Files tab to show "Computer." I can still drill down to the correct folder, but since it's not set to the correct folder, all my "Manage Sites" info is missing as well.
Any thoughts?

The pop up box on the right with the Files, Assets, and Snippets has somehow changed my default "AAA_WebSite" folder under the Files tab to show "Computer." I can still drill down to the correct folder, but since it's not set to the correct folder, all my "Manage Sites" info is missing as well.
If you're referring to what I think you're referring to, that's the Site Manager dropdown box where you can quick jump between sites in DW and select which site you want to work on.
Click the box (where it says Computer) and select "AAA_WebSite" from the dropdown menu.
If I've mis-understood, feel free to repost.

Active-Standby -Client-Site VPN

Dear Experts.
We have Cisco two ASA 5550 which is configured in Active-Standby mode but client-site VPN is not working when secondary unit becomes active. Failover status is showing as " Secondary Active" when primary unit is active all client-site VPN connections are working fine. Both ASA's has 7.2(3) IOS image and DES, 3DES/AES license enables.
We are getting following error messages
IPSEC: Deleted outbound permit rule, SPI 0xBFA351A9
Rule ID: 0x059C3060
IPSEC: Deleted outbound VPN context, SPI 0xBFA351A9
VPN handle: 0x00227DFC
Jan 09 13:23:52 [IKEv1]: Group = DefaultRAGroup, IP = x.x.x.x, Removing peer from peer table failed, no match!
Jan 09 13:23:52 [IKEv1]: Group = DefaultRAGroup, IP = x.x.x.x, Error: Unable to remove PeerTblEntry
Please advise

One of the things that I have seen that can cause symptoms like this is to not have some files in flash of the backup ASA. In particular I suggest that you check for files related to the client VPN. So get the output of show flash from the primary ASA and from the backup ASA and compare them.
HTH
Rick

Web gallery site info presets

Can anyone tell me how to remove old and unused site info presets, have tried many ways but no success.
thanks

I suspect the original poster means not presets but the drop down list of most recently-used entries in the Site Info panel's various fields. I don't think there's a way to clear this list (short of hacking into the database).
John

Recovering website without domain, have all site info

Hi
I have changed to a new computer and don't have my domain file, however I do have the folder that I published all the site info to. Is there an approach to rebuilding the site using the published site info?

Is there an approach
to rebuilding the site using the published site info?
You can try to recreate your site inside iWeb using copy/paste from your published files. There is no way to bring the published stuff directly into iWeb if you do not have the domain file that created it.

Client Site info on Dreamweaver

Similar Messages

Maybe you are looking for