Client status 300 not modifiable for us jobattributes infotype

Hi Gurus,
We are in ECC6.0 and recently applied HRSP22.After this,my client was not able to create jobcode in PO03.When i select us jobattributes infotype and click create Client status 300 notmodifiable message was there.I checked T000 and no changes were allowed was set in Production.I have deactivated TRSPADMIN, TRSP CORR (set to X).But, still i see same message when try to create jobcode.Any quick inputs on this is appreciated and points will be given.
Regards,
Johnson

Hi,
Are you getting this error only for job attributes or also for some other senarioas.
thanks,
vasu.

Similar Messages

FSE2-client status is not modifiable

Hi Experts,
Everytime i run t-code FSE2(Change Financial Statement version, this message always appeared..
" ClIent ... has status "not modifiable""
Is there any t-code to make this modifiable?
Please advise...
Thanks
rey

Hi Rey,
In which client are you trying to do this change?
Normally this change needs to be done in the development client & transported to production client.
That is why this error appears.
If you want to change this setting, contact you BASIS consultant.
Regards,
Inoka

TS4071 I am trying to download Itunes but it is saying my system is not modified for it. I am running on a 32 bit system whatever that means. Please help!!!

I am trying to download itunes and it's not letting me it keeps telling me that my system is not modified for it. What do I do??? Help!!!

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
· Is the computer on a domain?
· Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

Inspection Lot Status (CROK)not updating for Certificate Reciept

Hi
I want to inspect vendor materials on the basis of thier Quality certificates
1) Config Set up:
a) Certificate type :YA72
Cert for each PO item :checked
Certificate Check reqd: :Checked
Enhance cert processing: Checked
b) Control key :0005 ( Delivery release ,Certificate)
2) Material Master (QM View)
    QM Procurement : Checked
   Control Key :0005
   Certificate Type :YA72
3) Goods Recipt
    MIGO < Purchase Data<Cert Reciept :Yes
    Inspection lot is created
Question : Inspection lot status is not updating for Certificate Recived or not
                  My understanding is Inspection lot status should be :CROK -Certificate Recieved
CTCM-Certificate Missing
Pls correct my understanding in case i am missing something
Thanks in advance

Is the status in the GR document have the cert field set as 5?
Since you set the "certificate check required" you must do an explicit check of the cert. I included below the help screen from this indicator in SPRO.
You should be able to review the status of your cert in transaction QC53.
FF
Explicit Inspection of GR Certificate Necessary
If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
Note
If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents.

Status profile not allowed for object type

hi
i had created a status profile (for having 2 statuses before production order release) and assigned in the order type.
but while creating the production order i receive the following error.
Message no - CO622
status profile not allowed for object type
please provide your inputs
regards
Ramesh

Ramesh,
once you cerate a Status profile in BS02 and add status to the same. in the tollbar you will see OBJECT TYPE push button, select teh obejcts like PP/PM order header / operation /comepeoent and PRT ect where that staus can be applied.
Then assign the statsu profile to order type.

RE: Client Not Modifiable for Z Tables

Hi all,
One of our developer created 3 custom Ztables, when he is testing in testing environment, he is able to modify 2 of them using SM30, but for one table it says "Client status not modifiable". i checked his profile and he got access to SM30 and also to S_TABU_CLI--> Allowed (X).
I dont know why it is not allowing this table to change and allows other tables to change ( I dont think this is any thing wrong with his authorization)
I also checked in SE11 and his delivery class is type "A" like the other 2 tables.
what else i need to check?
thanks,
Sun
Edited by: sun on Nov 19, 2008 3:53 PM

There was a little bug in SOBJ a while ago which let you change the owner of the object in a development system without transporting. But that should be fixed - as it is simply not an option anymore, also in a production system.
The better (more transparent) option in my opinion is to use the current settings flag if these tables are going to serve a "customizing" type function of the application and you want the flexibility to change them system specifically within your landscape without having to transport it and not wanting to open the (productive or test) client just to make a change of something non-critical for the application.
But you need to pick and choose them carefully. There are also some other settings which you might want to tighten the control on - for example very application sensitive master data.
Now I don't know what these tables are used for, but you did mention S_TABU_CLI being required so they are even client independent (most likely)... at least as far as their maintenance is to be concerned.
As you are asking this in the security forum (and not the ABAP or Data Dictionary forums), you might want to review the technical design of this solution...
It is not unknown that the developer and customizing roles find their way to production and used there with reliance on the SCC4 client settings either, and as these are client dependent... what are the settings of the other clients and the authority of the users in them?
But that is up to you. Certainly training and experience helps as well (which includes learning the hard way
I prefer the current settings to the client settings where the "use case" is justified.
Cheers,
Julius
ps: The one table which could not be changed, was it being changed from a different client than the other two?

Windows 7 SP1 client shows status of "Not Applicable" for every single update

Windows 7 SP1 client
Every update, including all Critical Updates for Windows 7, show a status of "Not Applicable" when running a "Computer Detailed Status Report"
The computer is current in updating its status with the WSUS server.
I am hoping that you can suggest reasons why this would be.
Thanks!
mk

It is only the one computer that has all of its updates listed as 'Not Applicable'
Some of these are the same updates that other computers show as 'Installed'
Any other ideas?
Yep!
Every update, including all Critical Updates for Windows 7, show a status of "Not Applicable" when running a "Computer Detailed Status Report"
The computer is current in updating its status with the WSUS server.
One of those two statements is not true.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

WIP status (RESA) not updated for process order with co-product

Hi,
We are facing the scenario below, please confirm whether item 2 behaviour is standard SAP.
1. Process order with settlement rule MAT - after WIP calculated, status RESA is updated & FI document it posted.
2. Process order with settlement rule OIT (co-product) - after WIP calculated, status RESA not updated & FI document posted.
Thank you.

Self found answer

Accouting Integration - status does not appear for selection...

We are on PPM5.0. We intend to replicate cProjects into PS.
We have carried out Accouting Integration, with all the required settings/configs.
The Project Type is marked for "Accouting Integration" (with "Flag for Transfer" as the trigger for PS project creation), yet we do not see "Flag for Transfer" in the status drop down at cProjects front end.
Neither after "Create", nor after "Release" does this status appear in the drop down.
Where could we be going wrong?
Please advise.

The object link for accouting integration was not maintained. Issue resolved.

User status does not work for campaign automation

Hi,
We have 5 user status in our campaign. When we select the campaign automation option, the user status appears but when we try to change from a status to another (sample: Open to Planificado) the next error appears:
Diagnosis
System error: An invalid transaction ID was used to check whether or not a business transaction is allowed. Transaction %%%% does not exist.
System Response
You cannot carry out the requested function for object Campaign.
Procedure
Please contact your system administrator.
We include the option release in each user status and everything works fine, however, we require that release status (system estatus) only appears in the latest user status
I hope someone help me
Thanks,

The error was resolved by applying the following note 1513934 - transaction %%% does not exist

Srvctl status listener not wkng for 10g DB on 11g cluster

Hi Friends,
I am using Oracle 11g (11.2.0.2) cluster and on which 10g database(10.2.0.2) database and listener is registered.
I have a problem in using srvctl (10g) to check the listener status.It's throwing error but i am able to start and stop listsner service using srvctl:
bash-3.00$ which srvctl
/oraho/ora10g/product/10.2.0/db_1/bin/srvctl
bash-3.00$
bash-3.00$ ps -ef | grep tns
grid 4528 1 0 May 31 ? 0:13 /orapdpw/app/oracle/product/11.2.0/grid/bin/tnslsnr LISTENER_SCAN3 -inherit
grid 4537 1 0 May 31 ? 0:13 /orapdpw/app/oracle/product/11.2.0/grid/bin/tnslsnr LISTENER_SCAN2 -inherit
grid 4531 1 0 May 31 ? 0:13 /orapdpw/app/oracle/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
oraho 11336 1 0 15:59:05 ? 0:00 /oraho/ora10g/product/10.2.0/db_1/bin/tnslsnr HOLISTENER_JXR12DB1 -inherit
bash-3.00$
bash-3.00$
bash-3.00$ srvctl status listener -l HOLISTENER_JXR12DB1
Usage: srvctl <command> <object> [<options>]
bash-3.00$
bash-3.00$ srvctl status listener -l HOLISTENER_JXR12DB1 -n JXR12DB1
Usage: srvctl <command> <object> [<options>]
I even tried as grid user but same error
But i could able to use
srvctl start listener -l HOLISTENER_JXR12DB1 -n JXR12DB1 and
srvctl stop listener -l HOLISTENER_JXR12DB1 -n JXR12DB1
I could use the srvctl status for DB and it's working fine
bash-3.00$ srvctl status database -d HOTEST
Instance HOTEST1 is running on node jxr12db1
Instance HOTEST2 is running on node jxr12db2
Please let me know the reason
Regards,
DB

Hello DB
10g syntax does not support "srvctl status listener". See this URL:
http://docs.oracle.com/cd/B19306_01/rac.102/b14197/srvctladmin.htm#i1009882
Cheers
Riyaj Shamsudeen
Blog: http://orainternals.wordpress.com/
Oracle ACE Director and OakTable member http://www.oaktable.com
Advanced RAC seminar | http://www.orainternals.com/services/training/advanced-rac-training/

Client not modifiable

Hello,
When i am executing the transaction code OAAQ in production server it is working fine but when i am trying in quality server it says client 100 is not modiable where as both client settings are same in QA and PROD in SCC4.
When i made QA as modiable manual and then it is working fine...
I would like to know is there any config setting becase of that it is not working or is there any problem Basis side
Thanks in advance.
Regards,
Krushna biswal

Hello,
I have found the solution for it.
If the client role is "PRODUCTION" in SCC4 then it work fine, if it is other than "PRODUCTIOn" role then we need to change to modifiable client then only it will work, otherise, "Client XXX is not modifiable" messge will occured.
Regards,
Krushna Biswal

OVR1 and SR10 not modifiable in production system.

Hi all,
We would like tcode OVR1 and SR10 to be executable in our production system.
We want to skip the change request needed to push the new entries from our development all the way to our production system. I want only to activated the possibility to create the OVR1, SR10, SR11 and SR12.
Here is the message we get when we try to create in our production system
Message no. TK430
Diagnosis
The system administrator has set your logon client to the 'not modifiable' status.
Client-specific objects can not be changed in this client.
System Response
The function terminates.
Procedure
Contact the system administrator.
For more information, see the SAP Library under Change and Transport System.
Regards!
Curtis

To All,
The OSS Note 812002 will deactivate the transport requirement.
There's a config in Solution Manager that must be set also.
When I get the full Solution I will post it here.
Regards!
Curtis

0NOTIFICATN Status - Newly defined status does not get extracted?

Hi All,
There are few status defined in the SBIW under NTF1 and when extracting 0NOTIFICATN all these status are showing up. I need a new status need to be brought in from ECC. I went and added the status DLFL in the status maintenance of SBIW and when extracting 0STATUSNTF1_TEXT, I see the newly added status shows up, but However when I extract 0NOTIFICATN_ATTR, the new status does not come for any of the notifications.
Does any one know why it is not picking up the new status that I defined? Is there any other steps missing to get the status?
Any help is appreciated.
Thanks,
Alex.

Dazed,
I think you can assign any status to any STATUS* field. If you look closely you can see same status such as 'DLT' etc is assigned to multiple status. I am thinking more in line with order of status may be working here.
01 - OSNO
02 - NOPO
03 - NOPR
04 - NOCO
05 - DLFL
but the record has status in the following order
NOCO OSTS DLFL. Since it finds NOCO before DLFL and the value of NOCO is given 04 and DLFL is given 05. NOCO seems to be taking the priority. I just want some one to confirm the way it behaves. Because the system is already defined with first 04 values and has been running the process for the past 2 years, and now I want to introduce the 05 as a new status.
Does it makes sense?
Alex.

IDOC HRMD_A Client Has Status 'Not Modifiable'

Hi all,
I'm working with the HRMD_A07 Idoc.
The status is green, but the data are not loaded in the system.
It is possible that this situation is related to the status of the system that is 'Not Modifiable' ?
If I create a record in the PA30 I'm getting an error message about the status 'Not Modifiable' of the system, but at the end I manage to save the data.
thx

Hi Gabriel
For this u have 2 solution
1. Temporary
Every time you need to open client using SCC4 & SE06. After that u have to close the client.
2. Permanent
You have to talk to your ABAPer to have a customized Tcode for the REAJINDX.
Regards
Abhishek Tiwari

Client status 300 not modifiable for us jobattributes infotype

Similar Messages

Maybe you are looking for