Client System health certificate name issue

Hi,
System health certificate is generated using HRA server name for clients system.
There is no event log error for this. Can anyone suggest what can be the issue here.
Thanks,
Sridhar
Sridhar

Hi,
Could you offer more information about your environment? Such as your HRA configuration screenshot, now we assume you are using the intranet enterprise CA, because the HRA
will only request health certificates from the CA configured first in the order, unless that server is unavailable or has been identified as unresponsive, therefore maybe you have configure the incorrect CA order.
You can use the following procedure to modify the priority of CAs used by HRA, or to remove CAs from the HRA configuration. HRA will only request certificates from the first
CA configured in the list, unless that CA has been marked as unavailable.
To configure the order or to delete certification authorities using the Windows interface
1.Open the HRA console.
2.In the console tree, click Certification Authorities .
3.Right-click a CA name in the list of servers. Click Move Up to increase preference for this server in the order. Alternatively, click Move Down to decrease preference for
this server in the order.
4.To delete a CA from the list, right-click the CA name, and then click Delete .
The related KB:
Configure NAP Certification Authority
http://msdn.microsoft.com/en-us/library/cc731916.aspx
More information:
The Cable Guy: DirectAccess with Network Access Protection (NAP)
http://technet.microsoft.com/en-us/magazine/ff758668.aspx
NPS Best Practices
http://technet.microsoft.com/en-us/library/cc755120(v=ws.10).aspx
Certificates and NPS
http://technet.microsoft.com/en-us/library/cc772401(v=ws.10).aspx
Overview of HRA
http://msdn.microsoft.com/en-us/library/cc731872.aspx
Resources for using certificates with NPS and NAP
http://blogs.technet.com/b/nap/archive/2008/12/19/resources-for-using-certificates-with-nps-and-nap.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • KMS license activation issues client systems within child domains

    KMS Server Setup:
    OS: W2K12 R2
    KMS ver: 2012
    Multiple child domains including a single domain in which the KMS server resides. All client systems and servers are scattered across the child domains throughout the enterprise.
    The new KMS server, running OS 2012 R2 and KMS 2012, sits within a separate domain. All systems will eventually get migrated to this domain. I have two (2) KMS servers I plan on using to accommodate the pending activations. From reading I think you're allowed
    to have a totla of six (6) KMS servers.
    I've modified DNS to include placing the two servers within a security group and granting that group Full control permissions on the new _svc record.
    As of right now I'm able to discover servers and client systems scattered across the enterprise. I've also confirmed the ability to update license status on a number of servers.
    When attempting to update license credentials on client systems I get the following error:
    Unable to connect to the WMI service on the remote machine.
    I've come across a few systems that I've been able to update, most sitting within the same location. So I'm a little confused on how best to troubleshoot this issue.
    In addition I have a few Macintosh systems running a virtual parallel of Win7 that are also getting this error when attempting to activate.
    I've had other instances where when attempting to update license status the office products will get activated but not the OS.
    This issue only occurs on client systems so I'm hoping to get some direction as I've ruled out firewall and blocked ports as the cause.
    Any response appreciated.

    remote WMI needs a few things to work;
    a) networking/routing (can the destination machine be resolved by name? can you route to the destination machine?)
    b) permissions (is the account you are using to connect to the target, permitted or denied?)(is there a trust?)
    c) is WMI and DCOM on the target machine, healthy/configured correctly?
    d) can you successfully connect/authenticate to the target machine, using tools such as msinfo32, compmgmt.msc, "WMIC /node:computername csproduct get name"
    some useful tips:
    http://technet.microsoft.com/en-us/library/hh672144(v=office.14).aspx
    http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-can-t-connect-to-remote-wmi.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • "Invalid Field Name" Error message on Client System

    Hi all,
    I have installed some addons  on server, and the same is installed on client systems as well. on server everything works well. But when it comes to client systems, one particular form shows an error message, "Invalid Field Name", on loading the form.
    I have the same .srf's as on server but still the problem persists. If anybody knows the cause of the problem, please let me know what could be the reason.
    Regards,
    Rohan S. Kamble.

    Hi Rohan,
    Are you sure you have the same version of DI (also addon) on your client and your server side?
    Reinstall the addon on your client, check if the problem still happens.
    Regards,
    Jay.

  • My client requirementis: same file name should be in target system

    I am getting one file from source system the file name is empdetails.txt. I want to pass the same file name to the target system how we can implement this requirement.

    The below blog will also useful
    XI: The same filename from a sender to a receiver file adapter - SP14
    you can also refer to SAP Note 821267 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 / PI 7.3 File Adapter
    regards,
    Harish

  • WSUS SP2 Client Systems are not detecting Updates,

    I have a WSUS SP2 (with WSUS-KB2720211-x64) running on Windows 2008 R2. The WSUS site is running on custom site port 8530.
    All the clients are reporting without any issues. However the approved patches are not getting detected on the clients. 
    From the client I can get cab file by accessing http://WSUSServerName:8530/iuident.cab 
    Network connectivity OR firewall issue is ruled out. Also the client system are updating the update agent to
    7.6 from WSUS. I am sure the approved patches are needed on the client PC's, the WSUS report for a particular approved patch too says that the approved patch is needed.
    Please find the following WIndowsUpdate log from the client PC and please advise.
    2015-02-15 14:17:21:387
    804 ec4
    Misc ===========  Logging initialized (build: 7.6.7600.256, tz: +0300)  ===========
    2015-02-15 14:17:21:387
    804 ec4
    Misc  = Process: C:\Windows\system32\svchost.exe
    2015-02-15 14:17:21:387
    804 ec4
    Misc  = Module: c:\windows\system32\wuaueng.dll
    2015-02-15 14:17:21:387
    804 ec4
    Service *************
    2015-02-15 14:17:21:387
    804 ec4
    Service ** START **  Service: Service startup
    2015-02-15 14:17:21:387
    804 ec4
    Service *********
    2015-02-15 14:17:21:402
    804 ec4
    Agent  * WU client version 7.6.7600.256
    2015-02-15 14:17:21:402
    804 ec4
    Agent  * Base directory: C:\Windows\SoftwareDistribution
    2015-02-15 14:17:21:402
    804 ec4
    Agent  * Access type: No proxy
    2015-02-15 14:17:21:402
    804 ec4
    Agent  * Network state: Connected
    2015-02-15 14:17:28:313
    804 3f4
    Report CWERReporter::Init succeeded
    2015-02-15 14:17:28:313
    804 3f4
    Agent ***********  Agent: Initializing Windows Update Agent  ***********
    2015-02-15 14:17:28:313
    804 3f4
    Agent ***********  Agent: Initializing global settings cache  ***********
    2015-02-15 14:17:28:313
    804 3f4
    Agent  * WSUS server: http://192.168.1.1:8530
    2015-02-15 14:17:28:313
    804 3f4
    Agent  * WSUS status server: http://192.168.1.1:8530
    2015-02-15 14:17:28:313
    804 3f4
    Agent  * Target group: (Unassigned Computers)
    2015-02-15 14:17:28:313
    804 3f4
    Agent  * Windows Update access disabled: No
    2015-02-15 14:17:28:313
    804 3f4
    DnldMgr Download manager restoring 0 downloads
    2015-02-15 14:17:28:313
    804 3f4
    AU ###########  AU: Initializing Automatic Updates  ###########
    2015-02-15 14:17:28:329
    804 3f4
    AU  # WSUS server: http://192.168.1.1:8530
    2015-02-15 14:17:28:329
    804 3f4
    AU  # Detection frequency: 22
    2015-02-15 14:17:28:329
    804 3f4
    AU  # Approval type: Pre-install notify (Policy)
    2015-02-15 14:17:28:329
    804 3f4
    AU  # Auto-install minor updates: No (User preference)
    2015-02-15 14:17:28:329
    804 3f4
    AU  # Will interact with non-admins (Non-admins are elevated (User preference))
    2015-02-15 14:17:28:360
    804 ec4
    Report ***********  Report: Initializing static reporting data  ***********
    2015-02-15 14:17:28:360
    804 ec4
    Report  * OS Version = 6.1.7601.1.0.196880
    2015-02-15 14:17:28:360
    804 ec4
    Report  * OS Product Type = 0x00000007
    2015-02-15 14:17:28:360
    804 ec4
    Report  * Computer Brand = VMware, Inc.
    2015-02-15 14:17:28:360
    804 ec4
    Report  * Computer Model = VMware Virtual Platform
    2015-02-15 14:17:28:360
    804 ec4
    Report  * Bios Revision = 6.00
    2015-02-15 14:17:28:360
    804 ec4
    Report  * Bios Name = PhoenixBIOS 4.0 Release 6.0     
    2015-02-15 14:17:28:360
    804 ec4
    Report  * Bios Release Date = 2013-07-30T00:00:00
    2015-02-15 14:17:28:360
    804 ec4
    Report  * Locale ID = 1033
    2015-02-15 14:17:28:360
    804 3f4
    AU Successfully wrote event for AU health state:0
    2015-02-15 14:17:28:360
    804 3f4
    AU Initializing featured updates
    2015-02-15 14:17:28:360
    804 3f4
    AU Found 0 cached featured updates
    2015-02-15 14:17:28:360
    804 3f4
    AU Successfully wrote event for AU health state:0
    2015-02-15 14:17:28:360
    804 3f4
    AU Successfully wrote event for AU health state:0
    2015-02-15 14:17:28:360
    804 3f4
    AU AU finished delayed initialization
    2015-02-15 14:17:28:360
    804 3f4
    AU Triggering AU detection through DetectNow API
    2015-02-15 14:17:28:360
    804 3f4
    AU Triggering Online detection (non-interactive)
    2015-02-15 14:17:28:360
    804 ec4
    AU #############
    2015-02-15 14:17:28:360
    804 ec4
    AU ## START ##  AU: Search for updates
    2015-02-15 14:17:28:360
    804 ec4
    AU #########
    2015-02-15 14:17:28:360
    804 ec4
    AU <<## SUBMITTED ## AU: Search for updates [CallId = {0512C3B0-1E35-4BDD-9B28-02E064DF3EFB}]
    2015-02-15 14:17:28:360
    804 56c
    Agent *************
    2015-02-15 14:17:28:360
    804 56c
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2015-02-15 14:17:28:360
    804 56c
    Agent *********
    2015-02-15 14:17:28:360
    804 56c
    Agent  * Online = Yes; Ignore download priority = No
    2015-02-15 14:17:28:360
    804 56c
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2015-02-15 14:17:28:360
    804 56c
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2015-02-15 14:17:28:360
    804 56c
    Agent  * Search Scope = {Machine}
    2015-02-15 14:17:28:360
    804 56c
    Setup Checking for agent SelfUpdate
    2015-02-15 14:17:28:360
    804 56c
    Setup Client version: Core: 7.6.7600.256  Aux: 7.6.7600.256
    2015-02-15 14:17:28:360
    804 56c
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2015-02-15 14:17:28:375
    804 56c
    Misc Microsoft signed: Yes
    2015-02-15 14:17:30:981
    804 56c
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2015-02-15 14:17:30:981
    804 56c
    Misc Microsoft signed: Yes
    2015-02-15 14:17:30:981
    804 56c
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2015-02-15 14:17:30:981
    804 56c
    Misc Microsoft signed: Yes
    2015-02-15 14:17:30:981
    804 56c
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2015-02-15 14:17:30:981
    804 56c
    Misc Microsoft signed: Yes
    2015-02-15 14:17:30:996
    804 56c
    Setup Determining whether a new setup handler needs to be downloaded
    2015-02-15 14:17:30:996
    804 56c
    Setup SelfUpdate handler is not found.  It will be downloaded
    2015-02-15 14:17:30:996
    804 56c
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
    2015-02-15 14:17:30:996
    804 56c
    Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
    2015-02-15 14:17:30:996
    804 56c
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
    2015-02-15 14:17:31:012
    804 56c
    Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
    2015-02-15 14:17:31:012
    804 56c
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
    2015-02-15 14:17:31:012
    804 56c
    Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
    2015-02-15 14:17:31:012
    804 56c
    Setup SelfUpdate check completed.  SelfUpdate is NOT required.
    2015-02-15 14:17:31:449
    804 56c
    PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2015-02-15 14:17:31:449
    804 56c
    PT  + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://192.168.1.1:8530/ClientWebService/client.asmx
    2015-02-15 14:17:36:721
    804 56c
    Agent  * Found 0 updates and 76 categories in search; evaluated appl. rules of 724 out of 1278 deployed entities
    2015-02-15 14:17:36:721
    804 56c
    Agent *********
    2015-02-15 14:17:36:721
    804 56c
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2015-02-15 14:17:36:721
    804 56c
    Agent *************
    2015-02-15 14:17:36:737
    804 c4c
    AU >>##  RESUMED  ## AU: Search for updates [CallId = {0512C3B0-1E35-4BDD-9B28-02E064DF3EFB}]
    2015-02-15 14:17:36:737
    804 c4c
    AU  # 0 updates detected
    2015-02-15 14:17:36:737
    804 c4c
    AU #########
    2015-02-15 14:17:36:737
    804 c4c
    AU ##  END  ##  AU: Search for updates [CallId = {0512C3B0-1E35-4BDD-9B28-02E064DF3EFB}]
    2015-02-15 14:17:36:737
    804 c4c
    AU #############
    2015-02-15 14:17:36:737
    804 c4c
    AU Successfully wrote event for AU health state:0
    2015-02-15 14:17:36:737
    804 c4c
    AU Featured notifications is disabled.
    2015-02-15 14:17:36:737
    804 c4c
    AU AU setting next detection timeout to 2015-02-16 07:41:21
    2015-02-15 14:17:36:737
    804 c4c
    AU Successfully wrote event for AU health state:0
    2015-02-15 14:17:36:737
    804 c4c
    AU Successfully wrote event for AU health state:0
    2015-02-15 14:17:36:784
    804 56c
    Report CWERReporter finishing event handling. (00000000)
    2015-02-15 14:17:41:729
    804 56c
    Report REPORT EVENT: {6EBDD70F-EF5E-4673-9283-1A94A5FC5A0C}
    2015-02-15 14:17:36:721+0300 1
    147 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Software Synchronization
    Windows Update Client successfully detected 0 updates.
    2015-02-15 14:17:41:729
    804 56c
    Report REPORT EVENT: {621A5AA7-E564-44F1-B16B-5E928ECE4BC0}
    2015-02-15 14:17:36:721+0300 1
    156 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Pre-Deployment Check
    Reporting client status.
    2015-02-15 14:17:41:729
    804 56c
    Report CWERReporter finishing event handling. (00000000)

    KB2720211 has been superceded by KB 2828185, I'd recommend installing that first, it resolves a lot of issues with the first update.
    http://blogs.technet.com/b/wsus/archive/2013/04/16/update-solution-for-wsus-export-bug-is-now-available-for-wsus-3-x-sp2.aspx
    https://support.microsoft.com/kb/2828185
    It would be worth checking if those updates you think should be installed haven't already been superceded by others. It's possible newer updates have been installed, so the superceded updates could actually be declined.

  • How to disable Outlook for checking for IMAP/POP3 Certificate Name Mismatch?

    I have outlook clients that are connected to an IMAP/POP3 server that's off-site provided by company A.
    Company A requires me to enter imap.companya.com for imap server address and 993 for the port.
    I must also enable SSL for the connection.
    When I do this, Outlook pops up an error message (shown below), that must be reacted to every time it checks for mail.
    The reason is that the certificate is for myserver.companya123.com and that's different than imap.companya.com but company A wont change it. They said I need to disable my email programs certificate check so it doesn't keep prompting
    me. Now I can do this with my iphone, and other email programs without incident. But I cannot find where to disable it in outlook.
    If I change the imap server address in my account settings for outlook to instead use myserver.company a123.com, outlook can't connect and as the vendor said I must use imap.companya.com as the imap server address.
    I need to be able to connect via SSL (so nobody can swipe my password over the wire) but not have to react 1000x a day to the certificate warnings.
    I don't want to use Eudora, or another email client that allows me to easily disable the warning. I want to use outlook. How do I set outlook so it doesn't keep popping up these certificate server name mismatch warnings?
    I spent days searching for a fix, and it seems there are fixes via the registry for just about every type of certificate issue, but NOT THIS PARTICULAR ONE.
    I am hoping someone knows exactly what I am talking about and knows of a easy fix. I must use SSL so please don't tell me to disable SSL.
    What I need is to disable outlook from presenting that alert. That's what I need to do. No other solution will suffice. I hope outlook does not have a product limitation that prevents such a thing from being done. I am ok with a registry fix if need be, but
    being able to disable outlook from presenting certificate name mismatch alerts is critical. Hope its possible! Thanks!

    Hi,
    I would suggest we try the registry key mentioned in this
    article (Method 4) to configure Outlook to allow the connection to the mismatched domain name, and see if it works:
    HKEY_CURRENT_USER\Software\Microsoft\Office\<var>xx</var>.0\Outlook\AutoDiscover\RedirectServers
    Let me know if this doesn't work.
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Difference between client system and logical system

    Hi all
    Can any one explain about the client system and logical system??
    When this message type will comes in to picture at the time idoc processing??
    Thanks and Regards
    Arun Joseph

    hi Arun,
    I am giving the complete info on idoc.pls chk once.then ur issue will be solved.ok
    and to know the diffrence between client and logical system very keenly go thru this link
    https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=abouttheclientsystemandlogicalsystem&adv=false&sortby=cm_rnd_rankvalue
    IDOC Administration
    Step 1: Tcode: WE 46
    Setting the Global Parameter for IDOC Interface
    Step 2: Maintaing a Logical System
    Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
    Logical Systems, Define Logical systems
    Go to Spro transaction
    Step 3: Allocating Logical systems to the Client
    Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
    Logical Systems, Assign Client to Logical systems
    Go to Spro transaction
    Step 4: Setting up an RFC destination
    Tcode: SM 59
    Path: From the ALE Customizing in IMG, choose Communication, Define RFC
    Destination
    You can also do the Advanced Settings in the RFC Destination
    Step 5: The PORT definition
    TCode: WE 21
    Path: From the ALE Customizing in IMG, choose Sending and Recieving Systems,
    Systems in Network, Asynchronous Processing, Assign Ports, Define Port
    Step 6: Generating Partner Profiles
    TCode: BD 82
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, PArtner Profiles and Time of Processing, Generate Partner Profiles
    Step 7: Distributing the Model
    TCode: BD 64
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, Maintain Distribution Model and Distribute Views
    Technques for Distributing the Master Data:
    Technique 1: The Push Approach
    Executing the Process:
    TCode: BD 10
    Path: from the ALE Main Menu, choose Material Data Distribution, Cross
    Application, Material, Send
    Technique 2: The Change Pointer Technique
    Enable Change Pointers Globally
    TCode: BD 61
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution, Replication of Modified Data, Activate
    Change Pointers
    Enable Change Pointers Globally
    TCode: BD 50
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution, Replication of Modified Data, Activate
    Change Pointers for Message Type
    Specify the Fields for which Change Pointers are to be written
    TCode: BD 52
    Path: From the ALE main Menu, Choose ALE Development, IDOCs, Change , Define
    Change-Relevant Fields
    How the Classification system works:
    Creating a Class Type
    TCode: O1 CL(it is CAPITAL O)
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
    Maintaing Status for the Class Types:
    TCode: O1 CL(it is CAPITAL O)
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
    Maintaing Classification Status:
    TCode: O1 CL(it is CAPITAL O)
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Distribution using Object Classes, Maintain Class Types
    Maintaing Classes:
    TCode: CL 01 (it is zero)
    TCode: O1 CL(it is CAPITAL O)
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Distribution using Object Classes, Maintain Classes
    Allocating classes to the Logical Syatems
    TCode: BD 68
    TCode: O1 CL(it is CAPITAL O)
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Distribution using Object Classes, Assign classes
    to Logical systems
    Filering at the IDOC level:
    Identify the Filter Object:
    TCode: BD 59
    Path: From the ALE main Menu, Choose ALE Development, IDOCs,Data Filtering, Assign Filter Objects
    Type to IDOC Field
    Modify the Distribution model
    How Segment Filtering Works:
    Configuration:
    Configring the segment-filtering technique is a one-step process.Just specify the segments to be filtered
    TCode: BD 56
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Scope of the Data for Distribution, Filter IDOC Segments
    The Reduced IDOC Type:
    The reduced IDOC type allows to get down to the field level and specify the fields a recieving system does not need.
    The System still needs the fields, but this has no effect on the recieving system because each field has a null value,
    represented by a forward slash(/) in the field.
    TCode: BD 53
    Path: From the ALE Customizing in IMG,choose Modeling and Implemantation Business
    Process, MAster Data distribution,Scope of the Data for Distribution, Message Reduction,
    Create Reduced Message Type
    IDOC:
    Complete Documentaion on any IDOC using TCode: WE 60
    IDOC Display Tool: TCode: WE 02 or WE 05
    IDOC DEfinition components:
    Segment Components:
    1. Segment Type (E1, Z1)
    2. Segment Definition(E2, Z2)
    3. Segment Documentation(E3, Z3)
    E- SAP Defined
    z- Custom Defined
    IDOC runtime componets:
    control Record:
    Data Record:
    Staus Record:
    First Create the Segments using TCode: WE 31
    and then create the IDOC using TCode: We3 30
    first release the segments and then IDOC.
    Creating a new Basic IDOC Type:
    STEP 1: Analyze the Data:
    STEP 2: Create Data Elements:
    STEP 3: Create Segments:
    STEP 4: Create Basic IDOC Type:
    1. Execute TCode: WE 30
    2. Select the Create new option and enter a description for your basic IDOC type
    3. click the IDOC name, and click the create icon.
    Enter the segment type and its attributes.
    4. Keep on adding the segments as in step 3.
    5. Save the basic IDOC type
    Step 5: Release the Segment Type and Basic IDOC Type
    STEP 6: Transport the Segments and Basic IDOC Type
    Extending a Basic IDOC type:
    STEP 1: Analyze the Data:
    STEP 2: Create Custom Segments:
    STEP 3: Create the IDOC Type:
    STEP 4: Release the custom Segment and IDOC Extension
    Develop the function module for fteching the Data and then inserting the data into IDOC using
    EDIDD(for control Record) and EDIDC table(for DATA Record)
    Configuring the Systen for IDOCs
    Configure an Outboubd Process that uses Message Control
    Step 1: Create a new Message Type
    TCode: We 81
    Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
    Step 2: link the IDOC type to the Message Type
    TCode: We 82
    Path: From the Area menu of EDI, choose Development, IDOC Type/ Message
    Step 3: Create a new Process Code
    TCode: We 41
    Path: From the Area menu of EDI, choose Control,Outbound Process COde
    Step 4: Create or Change a Partner Profile
    TCode: We 41
    Path: From the Area menu of EDI, choose IDOC,Partner Profile
    Configure an Outboubd Process for Stand-Alone Programs
    1. Create a new message type
    2. Link the IDOC type to the Message Type
    3. Add the message to the ALE Distribution Model(use BD 64)
    4. Create or change the Partner Profile
    go through the following site to have screen shots.
    http://www.****************/Tutorials/ALE/ALEMainPage.htm
    thanks
    karthik
    reward me points if usefull

  • My System root certificate is not trusted and I cannot open Preferences with my Administrator password.

    My computer was hacked three days ago and malware installed. After consultation with Apple Support I reinstalled the OS and all seemed to be well. Today I tried to set some Preferences but my Admin password wouldn't work. I tried to reset it using my Apple ID, to no avail. Checking in Keychain Access I found that under System, my Certificate contains a message: 'This root certificate is not trusted'.

    DO NOT install "Avast." I asked about it as a possible cause of the problem, not as a solution.
    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1309 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 500 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 50 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %d more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'size (B): %d\n    '"${k[22]}"'checksum: %d\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt|xpc)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt|xpc))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { if(a[2]) next;split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"stat -f%z "F|getline S;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,S,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/ .+:/||!b) b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/://;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub(/["\\]/,"",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;} END { if(i) print h;for(j=0;j<'${p[24]}';j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' ' {o=o"\n"$0} NR==6{p=$1*$5} END{if(p>'${p[27]}'*10^6)print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics codesign lockstat );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|succ|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pa(gin|us)|Purg(ed|in)| err|Refus|s ful|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*{,/*} .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} '~ "kMDItemKind=Package"' '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |gnment |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '/A* -type d -name *.app -prune ! -user 0' -vv '-D1 -IPRWck -s5 sleep 1' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}\ services\ {load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages Modifications );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;B2&&D0 45 90 124;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 38;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;A1 4 88;D5 77 44 89;D4 7 11 6;D0 0 N1+18 109;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • How to include the user as a recipient of the email generated when a smart card certificate is issued by an Enrollment Agent on behalf of a user.

    How can I add the requester name in the To: field of the email generated when a Smart Card certificate is issued on his behalf.
    I want to address the possibility of someone (Enrollment Agent) issuing a Smart Card certificate on behalf of a user, assign a PIN and use it without the user's knowledge.
    There doesn't seem to be a way in the registry to define a variable to be used in a manner similar to the TitleArg & TitleFormat way of using %1.
    Jamal Saket OSFI Canada

    Hi,
    Thank you for your question.  
    I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. 
    Thank you for your understanding and support.
    TechNet Subscriber Support
    If you are
    TechNet Subscription
    user and have any feedback on our support quality, please send your feedback
    here.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Can two different SRM clients systems connect to one R/3 Back-end system?

    Hello,
    Trying to developing SRM Co-Exist/Global strategy, based on the following scenario:
    1.  Two different SRM client systems, each at DIFFERENT SRM Version/Release Level.  SRM system "A" runs in Stand-Alone and Extend Classic Scenario mode.  SRM system "B" runs in Classic Scenario mode
    2.  Two different R/3 back-end systems, each with SAME R/3 4.7 Version/Release Level.
    Question 1:  Can the two (2) different SRM client systems be connected to one (1) of the R/3 back-end systems?
    Question 2:  Are there any Basis Plug-In (PI_BASIS) issues/difficulties to consider from either the SRM client or R/3 back-end side?
    Question 3:  Does each SRM client need it own unique transaction document type(s) and number range(s) definitions?
    Question 4:  Are there any other difficulties, for example, with RFC and Partner Profile related definitions and what are the steps to address/resolve difficulties?
    Please advise and thanks in advance for your feedback!
    Regards,
    Ed
    Edited by: Ed Shigo on Mar 16, 2009 6:40 AM

    Question 1: Can the two (2) different SRM client systems be connected to one (1) of the R/3 back-end systems?
    They can be connected
    Question 2: Are there any Basis Plug-In (PI_BASIS) issues/difficulties to consider from either the SRM client or R/3 back-end side?
    Make sure that you have unique consumer entries for Middleware for Material replication, RFCs etc
    Question 3: Does each SRM client need it own unique transaction document type(s) and number range(s) definitions?
    Yes you need to have them.
    Question 4: Are there any other difficulties, for example, with RFC and Partner Profile related definitions and what are the steps to address/resolve difficulties?
    Don't see any difficulties as long as the a structured approach is followed.

  • WebRequest.Create Hangs in Client system with Windows 8.1 with Fmrk 4.5

    Hi,
    We are hosting a Windows Form in IE builded with .Net Target Framework 3.5 and running in ASP.Net website's run time .Net Framework 2.0.
    Till now, this is working in Windows 7 and IE11 combination. When we planned to migrate to Windows 8 and IE11 combination, some functionalities in the Windows form hosted in IE fails, its keep on hanging.
    When we debugged the code, we found that hanging happens at
    1. To insert a image 
    WebRequest request = WebRequest.Create(url);
    2. While doing webservice call
    CSpellCheckerWS objCUserDictionaryWordsWS = new CSpellCheckerWS();
    Please find below our Trails for workaround:
    1. We have try catch block on top of above lines, but it never comes to catch or proceed (checked for more than 30 minutes), its keep on running that makes IE to hang. End user have to kill the IE to proceed with our web application.
    2. We have timeout option for WebRequest object, but we are having problem in the constructor itself, so unable to make use of timeout option.
    3. We planned to use HttpClient object, but for this we need to build our Windows Form with Target Framework .Net 4.5. But .Net framework 4.5 will no longer support to host the Windows Form in IE.
    4. We observed that, for our Windows Form project dll, say abcd.dll, we have ref link to abcd.config.xml
    in the ASP.Net hosted web page. If we remove the *.config.xml, then we do not have this hanging issue. So, our problem solves here. But we faced another problem. Now we are getting
    404 errors for all the dependent child dll for our main dll, abcd.dll. Even though we have child dlls in the same folder of abcd.dll, it is checking in website root folder, bin folder , .exe, .dll and finally after 8 iterations, it is picking
    the correct dll. So for multiple child dlls we are getting 9 * no. of child dlls = 404 errors. So, we are unable to proceed further.
    200 http://localhost/BrowserWebSite.CSharp/Default.aspx
    200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserApplication.dll
    200 http://localhost/BrowserWebSite.CSharp/BrowserApplication.config.xml
    200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserApplication.dll
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication.EXE
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication/BrowserChildApplication.EXE
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication.EXE
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication/BrowserChildApplication.EXE
    200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserChildApplication.DLL
    So, please guide us how to proceed further. What is the relation between the *.config.xml and WebRequest.Create constructor and 404 errors.
    We have simple test application to replicate the issue. If needed, I can share the application.
    System Requirements to replicate : Windows 8.1, IE 11 and (Client system having .Net 4.5) and Windows / Web projects builded with .Net 3.5/2.0 respectively.
    Note : We have run caspol settings and set EnableIEHosting to 1 (DWord).

    Hello,
    >>When we planned to migrate to Windows 8 and IE11 combination, some functionalities in the Windows form hosted in IE fails, its keep on hanging.
    What .NET Framework version are you using after you migrate your client to windows 8 and IE11? If it is 4.0 or 4.5, I am afraid this is by designed because hosting controls in IE is now blocked by default (as of v4 or v4.5). See MSDN article under
    'Web Applications'.
    You could still enable it by modifying its provided registry key.
    By the way, since this issue is related with IE and web application, I suggest that you could post such kind of issues to related forum, as
    IE forum and Web forum.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Source system 8(ODS name) does not exist

    Hi experts!
    When I transport some Process Chane from DEV to PRD I faced with issue that the source system 8(ODS name) does not exist.
    Is anyone faced with same error?
    Thx!

    Hi.......
    Look.......
    U cannot Transport it........First Right click on the Infoprovider in PRD >> Export Datasource...........then replicate it from bw myself........
    U hav to generate it in Production also.............hav u done this before replication.....?
    Regards,
    Debjani....

  • Certificate Name and Expirty Date is not saved in Certificate Manager

    The following scenario is happening for few cases:
    * Firefox shows "Add Exception" for the certificate
    * The certificate is added as permanent exception.
    * Go to Firefox -> Tools -> Options -> Advanced -> View Certificates
    * Go to Servers Tab
    * The certificates which I had stored, doesn't show the certificate name and expiry date. For certificate name it shows <Not Stored>, and for expiry date it is empty.
    * Also, when I select it, Export, View is all disabled. Only "Import", "Delete" and "Add Exception" is enabled.
    * If I click on "Add exception" again, it says it is verified as it is already there in database.
    * However, if I add it as "Temporary", then everything "Name, Expiry Date" is saved.
    Is it a known issue in Firefox or am I Missing something. Please confirm and let me know.

    Hi,
    Go to T Code :-SM31
    table J_1IEWT_ECFLAG -
    check " X" against your Company code.
    hope this will help
    SU*

  • System.getProperty("user.name") not working without /etc/passwd, CentOS 4.3

    Dear all,
    I'm having trouble getting the system property user.name (which we need in our ant scripts) on our CentOS box. :(
    When running the program below thru
    java dumpproperties2
    it prints "user.name='?'" on our CentOS 4.3. On win32 it works. It turns out that if you add the account corresponding to the EUID to /etc/passwd it works correctly. However, we don't use passwd authentication but an enterprise wide LDAP-system. Our /etc/nsswitch.conf says:
    passwd: files ldap
    One work around is to replace the java executable with a script that does
    /path/to/jdk/bin/java -Duser.name=$USER -Duser.home=$HOME $@
    Used jdk is j2se 1.5.0_13 Linux 32-bit.
    Some questions for the experts:
    1) Is there any other way?
    2) Is it a known issue that Linux versions of the jdk just looks in /etc/passwd to map uid to user name (and home dir) instead of doing what the rest of the system, like whoami, does? I haven't found anything in either the readme or installation instructions, nor in the bug db.
    Br, Jesper Tr�g�rdh
    public class dumpproperties2 {
        public static void main(String[] args) {
         String s = System.getProperty("user.name");
         System.out.println("user.name='" + s + "'");
    }

    Does this work?
    //public final class System
    public static String getenv(String name)Then you can access the USER environment from inside Java.

  • System generated column names

    Version - Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    I see some system generated column names(like SYS_C00009_13061211:44:57$,SYS_C00033_13061211:44:57$) in ALL_TAB_COLS view for a partitioned table, not sure how they got created in the first place and tabledoesn't have any virtual columns. Is it something if we drop a column from table and oracle trying to keep them in the dictionary? when i describe the table these "SYS_C00" columns are not showing.
    I am trying to exchange the partition with staging (similar structure) table, but i end up with this error "
    14097. 00000 -  "column type or size mismatch in ALTER TABLE EXCHANGE PARTITION"
    *Cause:    The corresponding columns in the tables specified in the
               ALTER TABLE EXCHANGE PARTITION are of different type or size
    *Action:   Ensure that the two tables have the same number of columns
               with the same type and size."
    Any suggestions would be appreciated.
    Thanks,
    sg

    I have found my solution to this problem.
    My table is compressed table and when i try to drop some of the columns oracle marking them as unused(SYS_CO with timestamp) instead of dropping them. For partition exchange i have created same number of columns as original table in the same order and marked the "dropped" columns as unused on a temporary table. Now i can able to exchange the partition with out any issues
    Thanks to Jonathan and Connor.
    EXCHANGE PARTITION those pesky columns | Learning is not a spectator sport

Maybe you are looking for

  • Converting from ALAC to AAC:  A question of quality?

    I'm trying to back up my music electronically. I have all of my CD's on a rack in my entertainment center. However, I'm upgrading to a flat panel TV (YES!!!) finally, and with my old tube TV, the entertainment center is going, and being replaced by s

  • Zoneinfo bug for Asia/Yekaterinburg and others

    Hi! I've just discovered that zoneinfo has incorrect or missing DST settings for most of russian cities up until 31 March, 1981. For example, mktime(3C) returns GMT when tm_isdst flag is set to 1, and other values point to time before 01 Apr 1981. Ho

  • [INS-06001] Failed to perform operation due to internal driver error

    I'm installing GI 11.2.0.4 on the zone of solaris(SPARC) 11.1. Among executed runInstaller, the following error occured when "setup" button is pushed for checking SSH connectivity on "Secify Cluster Configuration(Step 4 of 9)" section. [INS-06001] Fa

  • Can't open msg server in console

    When I launch the console, I can see the messaging server, but can't open it. The error message is "Can't set uid and gid". What could be the possible cause? Thanks

  • Ipod won't sync because I have 10.2 (but I have 10.3!)

    I try to install the update because after sync it says the ipod hasn't synced all the songs in itunes because "my software is too old". So I download the ipod updater and there is a red exclamation mark on the ipod in the update window and the dialog