Client System & Output Client System For BI Integaration

Hi ,
What is the Client system & Output Client system when using Generic vendor BW map in Syndicator. Can anybody throw some light on it & how to change the client system in Map Properties Tab.

Hello Anand:
I don't think you can change the client system on the syndicatio map. What you can do, is open de syn map with the predefined client system, then export the map into an external file (for instance, c:\mySyn.syn)
Afterwards, open Syndicator again, select the client system you want, and import the map (c:\mySyn.syn). This should transport the syn mappings into the new client system
I hope that helps
Alejandro

Similar Messages

How to change R/3 System ID & Client values for a Business System in ID

I am a beginner in PI or XI. I am trying to modify R/3 System ID & Client# under Adapter Specific Identifiers of a Business System in ID. But both are in output mode and I tried to modify in SLD and then resynch at ID level, but I could not find a place where these parameters are specified for that Business System in SLD.
Please help me!

I have a Client 500 and R3 Server EN3 now these two things were already there on a Business System, but Admn did some thing on my test system and now we have another Business System pointing to TS of type WEBAS-ABAP and Admin assigned this same client 500 and EN3 server name in SLD to this new Business system, but as you know these changes will not reflect in my ID scenario automatically unless we do it manually with synchronization button under Adapter Specific Identifiers.
So my requirement is now to remove those values from the old BS and keep them or get them through synch for my new BS in my ID scenario, which I am not able to do it. The new BS is pointing to WEBAS-ABAP type TS but the old one I think it is now not pointing to any TS any more, it just left like a orphan with no technical System, I think Admn did some magic with bad practice, I believe.
HOw do I handle this situation?

IDOC-Xi-IDOC: CRM - XI -R/3 (No service for system SAPOCC, client ** in ID)

Hi all
I am doing a scenario IDOC - Xi - IDOC where CRM sends an IDOC to R/3 via PI.
I have configured everything in OCC (CRM system), PI and BSC (R/3 system) but when I test it with the transaction WE19 in OCC nothing happens in PI or BSC.
All i can see if a message in SM58 transaction in OCC.
Function Module - IDOC_INBOUND_ASYNCHRONOUS
Target System - XI.
Status Text - No service for system SAPOCC, client *** in Integration Directory.
Could anyone tell me what is the problem.
Your help will be very much appreciated
Regards
Naina

Error message: No service for system SAPCRD client 201 in the integration directory
Cause: There is no service without party in PI server that represents OCC server with client details.
Solution:
We send IDocs from system OCC to PI. In the control record (Segment EDIDC40) of the IDoc, the SNDPOR (SenderPort) field contains the value "SAPCRD". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the type (business-system/business-service)
In System Landscape Directory (SLD) create a technical system for OCC system and assign a client for the same. Don't forget to assign an "ALE logical system" to the technical system created. Create a business system for this technical system. Then Business System can be imported under service without party/update the details existing in PI.
Edited by: Rodrigo Alejandro Pertierra on Jun 23, 2010 10:28 AM

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

No F4 value for system and client field for create job request

Hi,
While creating a job request in Solution manager system filed and client filed F4 is not working , it does not show any value.
Do you have any idea regarding this issue.
Thansk & Regards,
kaushal

Hello Kaushal,
you habe to link user, key user i.e. a business partner (BP), and managed system and this work like this:
a) User <-> BP: start transaction BP, assign role Employee to your business partner and enter the user name on tab Identification
b) BP <-> managed system: start transaction BP, select role General and enter the External System Identifier (format: <managed system ID> <installation number> <client> <user in managed system>) on tab Identification
Alternative: Use transaction BP_GEN to create valid business partners for managed systems
See also the Solution Manager Implementation Guide (IMG):
-> transaction SPRO
.> SAP Solution Manager Implementation Guide
-> SAP Solution Manager
-> Cross-Scenario Settings
then
-> Business Partners
and
-> iBase
(Note that IMG path (and labels) might vary in between support packages)
Kind regards,
Martin
http://service.sap.com/jsm

SM58 status text " No service for system SAPERP, client 800 in integr "

In Idoc to file scenario:
i have fallowed this blog to configure ALE settings
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I have generated one idoc successfuly from sap r/3 system.
but i didn't find any idoc in xi server.
control records are
receiver:A000000036,(RFC DESTINATION->LS_XI_100( Remote login sucessful for xi system))
      LS_XI_100
      LS
Sender: SAPERP
     LS_SAP_800
     LS
ID: Adapter specific identifiers are( LS->LS_SAP800, R/3->ERP,CLIENT,800)
so i have gone to tcode sm58 in sap r/3
   where i found the status text "No service for system SAPERP, client 800 in integr)
Please help me from this problem.
Regards,
Deviprasad.

Hi Deviparasad,
please create a techincal system and busniess system of type ABAP in XI SLD if you have already created the techincal system and busniess system then check whether client 800 is used or not if include client 800.
please reward points
Regards
Sreeram.G.Reddy

No service for system SAP***, client 001 in Integration Directory

Hi,
We are doing a File to IDOC scenario.
The file is picked up and the idoc is getting generated in XI but this idoc is failing at XI outbound with the following SM58 error:
No service for system SAPABC, client 001 in Integration Directory
where ABC is my XI system ID.
I have searched in sdn and tried all the possible solutions given in the previous blogs with same subject but not able to resolve this error.
Any help will be greatly appreciated.
thanks in advance
Jagruthi

Hi Rao,
please check given link may be useful for you
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
No service for system ... in Integration Directory
Regards,
amit

No service for system SAPABI, client 800 in Integration Directory

Hi,
We are getting the error in BI "No service for system SAPABI, client 800 in Integration Directory", when we extract the data from R/3 (ECC6) into BI System. It was working fine earlier, till XI-BI integration was done.
But, After XI integration is done in BI system we are getting this error, when ever we try to load the data from source system. The XI integration is removed now, but the error still continues.
The source system is ok and could able to replicate the data from R/3 into BI. Is there any XI related customizing need to be removed from BI?, so that it directly goes to the source system for data load, instead of hitting the Integration Directory, which is part of XI.
It would be great, if someone can give a solution for this.
Thanks in Advance,
SAP Admin.

Hi,
First check at BI side transaction: SICF there services are properly configured or not, the services should be in Active state.
Second you must check transaction: SXMB_MONI here you can check what ever the Reports or Webservices are coming from out bound to inbound.
1. first check out bound in that server you type SXMB_MONI there u can see Flag that should be in black. If it is Flag is in Red then the Report should be stoped there it self.
2. Once it came to receiver side then u must check at inbound server by typing transaction: SXMB_MONI by checking that flag you will know what might be the problem.
Once check ur RFC connection also because you can get problem from RFC connections also.
Sateesh

No service for system SAPNID, client 800 in Integration Directory

Hi All,
I am getting No service for system SAPNID, client 800 in Integration Directory in tRFC monitor (SM58).
My scenario is IDOC to File.
I did following step in R3.
1. Created RFC destination pointing to XI systems (name:XID)
2. Created IDOC port (name: SAPNID) and use above (XID) RFC in RFC destination.
3. Create Partner Type LI (Partner No. 3000) and add message type ORDERS, set the receiver port (SAPNID) created above.
XI Side.
1. Create Technical System (Name : XID)
2. Business Systems (Name: R3XID)
3. In Integration Repository.
 Created Data Type
 Import IDOC ORDERS.ORDERS04
 Created Message Interface
 Created Message Type
 In Mapping Object created Message Mapping and Interface Mapping.
4. In Integration Directory
 Created the Scenario (name : FILE_FROM_IDOC)
 Assign Business Systems as R3XID
 Create communication channel(name: FILE_ORDERS_COM_CHNL)
 Create Receiver Determination
 Interface Determination
 Receiver Agreement.
IDOC is triggered correctly but in tRFC monitor I am getting following error
No service for system SAPNID, client 800 in Integration Directory
With regards
Sunil

Hi Udo/Renjith and Rakesh,
Thanks for quick reply and appreciate you help.
Now I can say that there is some problem with my Technical Systems or Business Systems, let me give you details regarding my Technical/Business systems.
During post-Installation i created Technical/Business System, following are the details regarding these systems.
Technical Systems.Detail
System Name: XID
System Home: crmides
Installation Number: INITIAL Change...
Release: 640
Description:
Administrative Contact:
TMS Domain:
TMS Transport Group Name:
Clients: 100 800 Add...
Message Server: XID crmides
Central Application Server: crmides_XID_00
Secondary Application Servers: Add...
Internet Transaction Servers: Add...
Installed Products: SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
Add...
Installed Software Components
Business Systems:
1. R3XID
2. SAPNID
Earlier I have only one Client (100) and One Busines Systems (R3XID)
My XI Systems is XID Host : crmides Client : 100 System Number : 00
My R3 Systems is NID Host : netbw Client : 800 Systems Number : 02
Business Systems Detail
Name: R3XID
Description:
Administrative Contact:
Business System Role: Integration ServerApplication System
Pipeline URL:http://crmides:8000/sap/xi/engine?type=entry
Integrated Business Systems: SAPNID
Group: (No Group Assigned)Edit Groups...
Transport Targets:
Technical System: XID on crmides Change...
Client: 100 of XID
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
During Post Installation I had one Technical Systems (XID) and one Business Systems (R3XID), after that I created one more Business Systems (SAPNID).
SAPNID Business Systems Detail
Name: SAPNID
Description:
Administrative Contact:
Business System Role: Application System
Related Integration Server: R3XID
Group: (No Group Assigned)
Transport Targets:
Technical System: XID on crmides Change...
Client: 800 of XID
Logical System Name: SAPNID
Installed Products: SAP R/3, 4.5B XID on crmides
SAP R/3, 4.6C XID on crmides
SAP EXCHANGE INFRASTRUCTURE, SAP EXCHANGEINFRASTRUCTURE 3.0 XID
Software Components: ABC, 1.0 of knack
R/3 CORE 4.5B
SAP ABA 4.6C
SAP ABA 640
SAP APPL 4.6C
SAP BASIC JAVA LIBS 6.30
SAP BASIS 4.6C
SAP BASIS 6.40
SAP GUI FOR WINDOWS 4.5B
SAP GUI FOR WINDOWS 4.6C
SAP GUI FOR WINDOWS 6.20
SAP HR 4.5B
SAP HR 4.6C
SAP ITS 4.6B
SAP ITS 4.6C
SAP J2EE ENGINE 6.30
SAP J2EE ENGINE CORE 6.30
SAP JAVA TECH SERVICES 6.30
SAP JCO 6.30
SAP SOFTW. DELIV. MANAGER 6.30
XI ADAPTER FRAMEWORK 3.0
XI CONNECTIVITY SE 3.0
XI TOOLS 3.0
I do not know whether SAPNID is required or not, earlier I used R3XID as Business Systems at the time of configuration now I changed it to SAPNID. I am getting the same error in both the case.

No Service for system X, client Y in Integration Directory

Hi All,
I have the XI, SAP R/3 and BI system setup on the same machine. I am doing a Idoc to File scenario. This is the first development after fresh installation.
I configured the ports(we21),partner profile(we20),distribution model(bd64) etc and ports by idx1.. After all this, I generated the Vendor through bd14 and getting the following error (No Service for system X, client Y in Integration Directory) in sm58. But when I check the outbound message in we05, its successful. Can someone please help me on this!!
Thanks
Varun

Hi
Go through this
first clear the SLD cache, by choosing from the menu Environment --> Clear SLD Data in ID and open your scenario and see if you any Business System assigned to it, you check that by going to,
your scenario --> service without party --> business system, and if there are no business system existing, you have to assign a business system.
Also have a look at the following thread,
No service for system ... in Integration Directory
Thanks

No service for system X client Y in the integration directory

Hi guys and gurus,
I've struggling with the following case for a couple of months (!!) and still I can not make it. I have to say that I am coming from the MM modules but trying to set up a ICH demo by myself during my spare time.
I send an idoc from R/3 to XI using program RSMIPROACT and I get message No service for system SAPR3I, client 800 in Integration directory. Even though, idoc has status 03 (Outbox).
- I have created a technical and business system.
- Connections work properly in SM59
- Port XIDOCPORT with RFC XIDCLNT100 maintained txn WE21
- Partner XIDCLNT100 (LS) with Outbound parameter:
Idoc name - Port created. txn WE20.
- IDX1 maintained in XI system.
Is there something missing?
This is my first post but points rewarded if somebody takes me out of this hole.
Thanks,
Ivan.
key words: ICH, Note 940313 IDoc adapter: Error messages in SM58, <a href="https://service.sap.com/sap/support/notes/940313">Idoc Adapter : Error Messages in SM58</a>, No service for system SAPABC client 123 in the integration directory,

Hi ,
Create a technical system and bussienss system of type WEB AS ABAP and use this bussiness system for source system in XI and try it.
Thanks & Regards,
Sekhar

No service for system sap*** client *** , sm58 error

Hi Friends
When I am trying to send message from My Xi system to R/3 system I am getting error.,
No service for system SAPSXD, client 001 in Integration Directory
I had searched it on sdn n found that this is very common error.
I had gone through block,
The specified item was not found.
But then also not able to solve this error.
I m giving the config of my sys here,
I had created,logical system in my R/3 system for Xi system as SXD001 , and logical system for R/3 system is SND111.
and same thing I had maintained in Xi system also.
Now when i m trying to send message from Xi to R/3 I am gettin error in SM58 ,
No service for system SAPSXD, client 001 in Integration Directory.
I had checked note 940313 , that is for this same error, but the solution given in that is for when we get error while sending idoc from R/3 to XI but in my case I am getting same error while sending Idoc from XI to R/3.
I had creted 2 business system one as third party and one for my r/3 system.
where should i assign the logical system? and which logical system should i assign?that of XI system??
I had searched SDN lot but didnt got any scenario like this.
So please let me know..how to solve this problem.

Hi Udo,
I had created a technical system as third party system for our partner. and technical system as web as abap for my R/3 system. In the third party system I had assigned a business system and a logical system as BAS01, and to my R/3 system I had assigned a business system and logycal system as SND111.
SXD is my system ID for XI.
In Id i had configured the whole scenario by creating importing this two business system under service withour party. and I am configuring under that. So how should i configure sender system here.
do i need to change some configuration on R/3 side? On r/3 side,in distribution model, i had defined the logical system name of PI as sender.Do i need to create the third party system here and specify its name in 'from' indistribution model?
This is my first scenario in XI so gettings lots of problem. I really appritiate ur help.
Thanks.

No service for system SAPDRT, client 011 in Integration directory

Hi Experts,
Currently i am working on IDOC to file scenario.
IDOC is sent out of ecc 6.0 succefully with STATUS CODE 03.
But its not reaching the Xi sytem.
on the ERP side i am geeting an error in the transaction SM58 Saying that
"No service for system SAPDRT, client 011 in Integration directory"
What may be the issue ?
I have tries all the soultions that are in SDN.
Thanks in advance and best regards,
Anil

Hello Anil
This error will come if IE not able to match the parameters of your idoc control record
SNDPOR and MANDAT fields with Business system/services R/3 SystemID and port parameters
so go to your business sender system/service and check these parameters are configured as expected of idoc
Rajesh

No service for system YYYYY client ZZZ in Integration Directory

We recently applied SP12 to our XI 3 on SR1. When we try to send an IDoc from SAP R/3 system to SQL database (IDoc and JDBC Adapters) we are getting error messag in SM58 (R/3 System) as "No service for system SAPIDS, client 800 in Integration Directiry". SAPIDS is the port created using IDX1 and 800 is the R/3 IDES client. RFC communications etc work good. We do not se any difference in the set up of Integration Repository as well as Integration Directory.
Please advise.
Thanks,
Bhaskar

Hi Bhaskar
As the error message says, the service is not available. In your Integration directory, first clear the SLD cache, by choosing from the menu Environment --> Clear SLD Data. Then open your scenario and see if you any Business System assigned to it, you check that by going to,
your scenario --> service without party --> business system, and if there are no business system existing, you have to assign a business system.
Also have a look at the following thread,
No service for system ... in Integration Directory
cheers
Sameer

IDOC outbound port - No service for system X, client Y in Integration Direc

Hi all,
We have a problem when sending an IDOC from ECC to XI to Legacy. At ECC, tx SMQS, we got the error "No service for system SAPEQ0, client 400, in Integration Directory".
I don't know what we need to do in ID to provide this service and solve this error...
Our ECC is configured on SLD as EQ0_400 (Logical name EQ0CLNT400), and the scenario was developed at Integration Directory using EQ0_400.
Debugging standard function that send the IDOC, I found that it ever uses the sender port as "SAP" + SY-SYSID... So I'm confusing, is necessary to configure the system in SLD whith this name "SAPEQ0"?
thanks.
roberti

Glad to hear that you got it working.
>>"Error occurred during back-routing Error in communication channel".
Can you give some more description about the error?
Hope you have configured a IDOC receiver communication channel poiting to the ECCwith no reciever agreement attached to it.
Regards,
Jai Shankar

Client System & Output Client System For BI Integaration

Similar Messages

Maybe you are looking for