Client update not working due to distribution point
Since upgrading from 2012-SP1-R2 i haven't been able to upgrade the clients, im fairly sure now after a fair amount of research this is down to the distribution point. I would assume that if there was an issue with the distribution point the update wouldn't
be sent to the clients.
Im fairly sure i have the automatic updated all done, via the Hierarchy settings. Its only when i went to distribute content on one of my packages i realised that the issue might be with the MP/DP as i get "failed to distribute content details will
be available after server finishes processing"
In distmgr.log i get "package ****00002 does not have a preferred sender.
Used 0 out of 3 allow processing threads
In smsdpmon.log There is nothing for months which was my next check.
Similar Messages
-
ITunes update not working due to Bonjour
I'm trying to install the latest update for iTunes, and I keep getting an error message saying something like "the feature you are trying to use is on a network..." (can't remember the rest) and basically it's asking me to choose another location that bonjour.msi is in. The folder is right, the program is there, and it's still not working. As a result, I can't finish the update, I can't access iTunes from my start menu or any icons (I literally have to right click an mp3, hit open with iTunes, and then have it open from there). My iPod is still syncing, but it's not even recognizing my iPhone because it also gives me an Apple Mobile Device Driver error, which I assume is connected to the Bonjour issue, but maybe it's not. HELP. I have already installed the latest version of Bonjour Print Services like I saw in a recent Bonjour thread, but that did nothing for me AT ALL. I'm getting very frustrated with the entire thing because I haven't deleted a thing or changed anything about my computer, and this update is making me beyond angry.
Me three....what's up with iTunes tonight, is there a server problem? Anyone called Apple???
-
Software Update not working due to a "networking error"
Hopefully this post is in the correct forum. In trying to run Software Update, I am getting a networking error ("A networking error has occured: time out (-1001). Make sure you can connect to the Internet, then try again."). I can get on the network just fine via Firefox, and my Mobile Me account is syncing to my Address Book and iCal. However, Safari, Mail, and Software Update can't seem to connect. I ran Repair Permissions and Repair Disk (from the 10.5 Install disc), but these did not solve the problem. I also downloaded and ran the 10.5.4 Combo; it appeared to run fine. But subsequently running the Security Update 2008-005 and trying to reinstall Safari failed (both directly downloaded from Apple). Security Update won't let me select the computer hard drive, and Safari tells me that OS 10.5.2 or higher is required (even though I have 10.5.4 installed). I also tried running Software Update from other profiles on the computer to no avail.
Any thoughts as to what is going on here? I'd prefer not to have to reinstall the OS from scratch, but I'm running out of ideas.
Thanks!Select the clone tool and try a tool re-set.
-
After updating to Firefox 5 my Realplayer Recorder is not working due to that add on not being compatible. How do I get this to work again?
Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers -
Site list update not working with TED and Zenworks for Servers
Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
RegardsAndreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details.. -
BPC 7.5 Admin Client Links Not Working
I am working in BPC 7.5 SP15 NW. I have recently upgraded to Windows 7 64-bit and now the links in the action pane in the desktop admin client are not working. The cursor does not change from the nornal pointer to the hand. That would indicate that the admin client is no longer recognizing them as links. The links work fine in the desktop Excel client. I am using 32-bit Excel 2010 with no other version of Office installed.
Has anyone heard of this behavior and how to correct for it?Hi Kannan,
i think this is a Osoft web site configuration issue, the error indicates that you have one duplicate section in the web site configuration file (web.config).
If you didn't alter the web.config file then the problem may occur because when you use framework 4.0, the machine config already has some of the sections defined that were used in previous ASP.NEt versions.
You should check which version of the MS Framework is configured for the application pool of the web site, change it to v2.
Let me know if this solves the issue. Or if you need more help to resolve it.
Kindest regards, -
Same issue Network Discovery not working and Windows Update not working
I've read the threads.
This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
Everything was working before. I tried all of the recommended services turning on restarting.
Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
I don't have the NetBIOS over tcp/ip in my services?
I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients.
Thank YouHi,
If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
When you turn on network discovery, do you get any error prompt?
Please check if you have any error message about network discovery in event viewer.
Open Event Viewer
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
What information appears in event logs (Event Viewer)?
http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
Also, please temporarily turn off your firewall and all the security programs for a test.
As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness, Remote Procedure Call (RPC), Function Discovery
Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
You should check again if you have started all these services.
Regarding the update issue, I suggest you try the following suggestions.
1. Temporarily disable firewall and antivirus program to test the issue.
2. Open the Windows Update troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
3. Reset Windows Update components
http://support.microsoft.com/kb/971058
You may follow the steps from the link below to fix the issue.
Windows Update Not Working.
http://support.microsoft.com/kb/555989
You may also see the common Windows Updates troubleshooting guide.
Fix Microsoft Windows Update Issues
http://support.microsoft.com/kb/906602
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Application is not working due to memory issue
Hi Friesnds,
Kindly help me regarding settings in java. Scenario is like that. I have one server having two jboss versions (jboss-4.2.3 GA and jboss- 3.2.6). Each having java memory (JVM settings) 1 GB. The total memory of that server is 3 GB.
Problem is that every two days my application is not working due to memory issue. Once i freed the memory (through run the commands - (1). sync
(2). echo 3 > /proc/sys/vm/drop_caches
Application works fine.
I heared that the above command (echo 3 > /proc/sys/vm/drop_caches) can't run frequently because of server crash.
Kindly help me regarding this issue and provide the resolution.
Let me know if you need more information from my side.
Thanks
Ashish ShuklaAll of the above. I tested on 4 different networks and had no luck, I also had friends test my network and the other networks with their iPhones and all had no issues using FaceTime.
Also after I wiped my phone (erased all content and settings) I was able to successfully initiate a FaceTime call with no changes to my network and was also able to initiate another call when connected to another previously tested network that didn't work before. Once I restored from backup though, FaceTime stopped working again.
I did find this discussion: https://discussions.apple.com/thread/5163024?start=0&tstart=0
and tried the suggestions found there too. That discussion describes my issue I am having as well. -
Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
12% Google Chrome
12% WindowServer
4% Dock
2% Little Snitch Agent
2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this. -
Mac Book Software Update not working (Software Update does not have any new software for your computer at this time), my current MacBook version is 10.5.8.
As a result I can't update iTunes, version 10.5.2 (This software requiers Mac OS X version 10.6.8 or later)
Now when I connect my iPhone 4, version iOS 6 iTunes can't connect to iPhone (The iPhone "XXXXX's iPhone" cannot be used because it requiers iTunes version 10.6.3 or later.)
so in a nutshell can't use iphone 4, because iTune is not updated and will not update because Mac Book is not up to date and will not update either.
Please help.
Thank you
bt465Welcome to Apple Support Communities
Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open > Software Update -
In the context of restoring a drive from a backup, i copied /etc/sudoers from my backup. Now it does not work due to the permissions not being correct (even though it was copied via sudo cp -rp)
Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
[solved] NFS client will not work correctly
I have all my $HOME on an NFS Server. So long I used suse and debian, now I want switch to arch but the nfs-client ist not working correctly:
I start "portmap nfslock nfsd netfs" over rc.conf. When I do a "rpcinfo -p <ip-arch-system>" I got the following
stefan:/home/stefan # rpcinfo -p 192.168.123.3
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100021 1 tcp 48988 nlockmgr
100021 3 tcp 48988 nlockmgr
100021 4 tcp 48988 nlockmgr
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 3 udp 891 mountd
100005 3 tcp 894 mountd
As you see "status" is missing, so the statd is not running. It sould look like the result on my suse box:
stefan:/home/stefan # rpcinfo -p 192.168.123.2
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 32768 status
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100024 1 tcp 35804 status
100021 1 tcp 35804 nlockmgr
100021 3 tcp 35804 nlockmgr
100021 4 tcp 35804 nlockmgr
There is the "status" line and so the statd is running.
How can I fix that problem, so that statd ist running on my arch box too?
Last edited by stka (2007-06-10 15:59:48)The Problem ist solved.
I use ldap for authentication. During the setup of the ldapclient I copied the nsswitch.ldap to nsswitch.conf. But the line for "hosts:" was:
hosts: dns ldap
but in my dns ist no localhost entry. After I changed this line to:
hosts: files dns ldap
everything was ok. The statd is now running and I can start to migrate to archlinux ;-) -
Wireless OS Update - not working
I've been trying to update my BlackBerry Torch 9800 6.0.0.246 to higher version wirelessly but all it says - “Your BlackBerry is up to date.” The others we're able to update their smartphone but why can't I? I don't want to plug my phone to any computer using the cable connector because I'm afraid it would get virus and be ruined eventually. Please help..
Duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Torch/wireless-OS-update-not-working/m-p/2039115#n...
Answer provided there. Please avoid poly-posting the exact same issue.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!
This topic has been moved to Operating Systems.
MSI Live Update not working Windows XP Professional 64bit Edition!!!Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I? -
TS1394 Software Update NOT WORKING (Snow Leopard)
Software Update NOT WORKING (Snow Leopard)
Hi, I am currently using Snow Leopard 10.6 on my iMac. I opened iTunes and was told there was an update available so I clicked the button to download it. This obviously opened up the 'download' screen with blue bar. The blue bar does not move and the message comes up that the download failed. I have tried troubleshooting, but the message I get is that I am not connected to the internet - which I am.
Please help.Check your iTunes version, it's reporting v10.6.3 here on 10.6.8 and no updates required.
You should be able to download it from here
https://www.apple.com/itunes/
Maybe you are looking for
-
Does Classic report provide facility to make report total to be hyperlink
Hi , Does Classic report in apex provide provision to make the report-total row editable(hyperlinked) ? if so how to implement that. Acq WIP Closed Abc 1 3 Def 2 5 report total : 3 8 Also is it possible to provide more
-
Hi All I am having trouble accessing the photos stored on my daughters iPod (4th Generation) - currently each time we access the iPod it re-boots if we select the photos option. Is there anyway / software tool of extracting the pictures that are stor
-
Mini Server makes odd noise from speaker!
Anyone else getting a noise from their Mac Mini server speaker that sounds like a file being deleted? No regular pattern to when it comes, it's unprompted and happens even when no one is logged on to the network. I have a (used) Mac Mini 2011 with tw
-
Printing in character mode with MSWIN1250 cp
Hi, A co-worker of mine has a very annoying problem with a report. The mission is creating a report which could be run on a matrix printer (e.g. epson 1170 , DFX-5000 or similar like these) and it must work well with MSWIN1250 codepage. The main reas
-
Respected members of this community... :) I need help. The last couple of days i spend implementing unified wireless at a customers site. We used the latest versions of the controller and WCS software. This new software offers a new feature, wired gu