Client Upgrade to PL 46 Internal Error

Hi Experts,
I am doing an upgrade from PL 30 to PL 46, the server upgrade finished successfully, I also did the client upgrade for one PC(running windows XP professional) successfully, however when I initiate the client upgrade process for this particular PC running on Windows Vista, I get this message "Internal Error (-1101) occurred Message [131-181]". anyone know a way around this ?
Many thanks in anticipation of your Prompt Response.
Best Regards

Hi,
I am afraid that your windows vista is a home premium, and it made the error happened. Let me know if it is true or not. Actually, the client should be installed with windows vista business for SAP B1.
Check this link to know supported platform of B1:
http://service.sap.com/smb/sbo/platforms
Rgds,

Similar Messages

SAP Client to the SAP Server: internal Error (-1102)[Message 131-183]

Hi,
We are using Windows 2008 Server R2, SQL 2008 Standard, SAP B1 8.81 PL08.
When we trying to connect SAP Client to the SAP Server. There has internal Error (-1102) occurred. We can view the database on client, but we always get the same error message after enter the User ID and Password. We have checked the native client and it is installed and also opened the following ports: 1433, 30000, 30001. We have tried to open all of firewall, but itu2019s no use.
When I set a computer in to the engine room and set the network connection, this one can connect SAP Client to the SAP Server.
But when client connect to server by VPN, the IP address will not in the same section. Then We tried to set the IP address has the same network section with the server, but it's still disable.
I set a computer for SAP Server without firewall, complex network, virtual IP and no router in my office. And use a SAP Client which is in different network domain to connect to SAP Server by internet, not VPN, but the SAP Client still canu2019t connect to SAP Server. I get the same internal Error (-1102).
It can not only ping to SAP Server IP, but telnet to the port 1433, 30000, 30001, 445.
When I use a pc with server tools, it can connect to the SAP Server by the localhost license. But if I use a computer only install client and assign the server license. The latter one always got the error.
How could we solve this problem? Is there has another setting I am missing which might be blocking the connection?
Thanks in advance.

Hi,
We are using VPN and using Terminal Licensing or Remote Desktop Conneciton.
The idea here is VPN will connect you to the network and when you are connected to the network
dont use the direct LAN IP connection use the Terminal Licensing to connect.
Again both are needed VPN and Terminal Licensing. VPN for the connection and if successfully connected
use or connect from Terminal Licensing or Remote Desktop connections.
Thanks.
Clint

Internal error after upgrading to 5.5 U1

We were on the general release of vCenter 5.5 this morning and the latest release of Infrastructure Navigator (5.8.0.117 build 14466517). I upgrade vCenter to 5.5 U1 successfully but the only thing I'm having issues with is infrastructure navigator. When I go to Infrastructure Navigator > VIN Home > Settings it says internal error for Infrastructure Navigator Access to VMs. I select Turn on access to VMs but it doesn't do anything. I rebooted the vCenter server which effectively restarts the web client services and waited and it did not resolve the issue. I also rebooted infrastructure navigator appliance and it didn't do anything. Anybody experience this issue before?

Thanks for the reply but according to the VMware Product Interoperability Matrixes that is incorrect. When you read the installation / upgrade guide it says to check your plugins against the matrix before upgrading. I did and it's compatible with vSphere 5.5 U1 and ESXi 5.5 U1 according to the matrix.

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

SAP B1 client system we got error Internal Error (-1101) occurred.

Hi,
when we are connecting server through particular user it's showing error Internal Error (-1101) occurred Message 131-183". this is client laptop contain OS is vista and sever has windows 2003 server.when we are login after it's showing to update patch level at this is time only we are getting and it's not updataing PL 43. we are using SAP B1 PL43. this problem only in this laptop.
Please advise me.
regds,
sampath.

Hi Sampath,
In order to try to resolve this issue, please do the following:
1. Go to start -> Run -> %temp% and clean up all the files.
2. Go to Control panel -> Add and remove program and uninstall the SAP Business one client.
3. Reboot the Notebook.
4. Turn off UAC (disable UAC) before installing the client so the registration of both the UI and DI will work. UAC -> a new security mechanism was introduced in Vista. It is called "user Account Control"
(For more info about this new feature please visit: [What is User Account Control?|http://windowshelp.microsoft.com/Windows/en-us/help/0eeb9ddd-ddaa-4cc5-a092-9908305665471033.mspx] and [Turn User Account Control on or off|http://windowshelp.microsoft.com/Windows/en-US/Help/58b3b879-924d-4e08-9358-c316055d3eae1033.mspx].)
5. Then reinstall the client from the B1_SHR.
Please make sure that you have followed the step no. 4 before doing client reinstallation.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

CUCM 8.6.1 Refresh upgrade to 10.5 fails with Internal Error (Function: ipmReadNormalizedInputLine) [SOLVED]

Hi,
we are upgrading our CUCM 8.6.1 to 10.5.1 on VMWare Enviroment (vSphere 5.5 running on UCS).
We are running this upgrade in a sandbox, in order to avoid any problem in the production cluster.
We followed the refresh upgrade guide ( http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.pdf)
Pre-configuration steps
Take a clone of the running publisher and put it in the sandbox
Remove DNS servers (they are not available in the sandbox)
Change the NTP Server with a ntp that is recheable from the sandbox
Check that Gateway and NTP connectivity are OK for the CUCM
Pre-upgrade:
Run the cop files to update keys and increase disk space (log partition is 80% full)
Shutdown the CUCM VM and
Increase disk space on the VM configuration
change VM OS from RedHat5 (32bit) to RedHat 6 (64bits)
change VM nic from flexible to VMNIX3
Restart the VM
Upgrade
1. mount the iso
2. connect to OS Administration web interface and perform the Software installation from CD/DVD
3. upgrade process works fine up to the post-installation task
During post-installation tasks (after completing the DB Load and Transforming Copy) the Upgrade process always fails fails with an internal error
IPM|Internal Error, File:ipm.c:2011, Function: ipmReadNormalizedInputLine(), "/usr/local/cm/script/cm-dbl-install RU PostInstall 10.5.1.10000-7 8.6.1.21019-1 /usr/local/cm/ /common/component/database /common/log/install/capture.txt " failed (1)|<LVL::Critical>
IPM| end-of-session "Installing database component": 1109.369 secs.|<LVL::Info>
IPM|Close progress meter "Component Install"|<LVL::Info>
We also tried the intermediate steps:
- upgrade from 8.6.1 to 9.1 : worked
- from 9.1 to 10.5: Failed with the same error
- from 9.1 to 10.1: Failed with the same error
any help will be greatly appreciated, thanks
Stefano

Issue was related to Dial Plans, the logs showed
16:45:46.204 |   DBUtil::BlockCopyTable ### *ERROR* ###: (diagnosis): Bulk Data Migration for table availdialplan failed due to data constraint issue, (-971).
16:45:46.611 |   DBUtil::BlockCopyTable *
16:46:16.555 |*ERROR* Error fetching column information: [Informix][Informix ODBC Driver][Informix]Could not position within a table (informix.systables).
16:46:16.588 |   DataConverter_5to6::CopyTables *ERROR* BlockCopyTable failed to process table (availdialplan)
16:47:52.395 |   installFull *ERROR* Prior Cancel or Error Processing convert5to6()
Cisco TAC fixed by updating the primary key in the DB.
After the fix we were able to perform the RU as expected.

Facetime Internal Error after Mountain Lion Upgrade

After upgrading to mountain lion on my mid 2011 imac I am recieving a facetime internal error. I tried the shutdown shift control option sequence and that fixed it for a few days but now the problem is back. Any suggestions on how to fix this would be appreciated.
Thanks

solved

A fatal error occurred while creating an SSL client credential. The internal error state is 10013.

Hi All
I am seeing the below event appearing in the system log on all our Exchange 2013 servers regularly. I am not seeing any connectivity issues between any clients and the servers and no other issues have been reported at this stage.
Log Name:      System
Source:        Schannel
Date:          10/04/2015 9:21:17 AM
Event ID:      36871
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:
Description:
A fatal error occurred while creating an SSL client credential. The internal error state is 10013.
I am not sure if its related to the public certificate we are using or if its related to the one provided from the local CA.I have searched and found other links that suggest it could be related to SSL versions being disabled etc.
All servers are running Windows 2012 R2 Datacenter. The Exchange CAS servers do also sit behind a pair of F5 BIG IP Load Balancers
Any suggestions on where to look?
Thanks

Hi,
According to the event log, the issue is related to Schannel instead of Exchange.
Please try the following steps:
1.In Control Panel, click Administrative Tools, and then double-click Local Security Policy.
2.In Local Security Settings, expand Local Policies, and then click Security Options.
3.Under Policy in the right pane, double-click System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing, and then click Enabled.
4. Ran gpupdate /force
If it doesn’t work, please go to C:\ProgramData\Microsoft\Crypto\RSA and grant "Network Services" Read permission to "MachineKeys" folder. Then restart server to have a try.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/lync/en-US/e70a8dbc-6f48-4fde-a93b-783554344822/a-fatal-error-occurred-when-attempting-to-access-the-ssl-client-credential-private-key?forum=ocscertificates
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
type: Exception report
message:
description: The server encountered an internal error that prevented it from fulfilling this request.
exception:
ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
root cause:
NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
note: The full stack trace of the root cause is available in the logs.
Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!

Hi Mesut,
you can refer the link for migration
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
regds,
aman

JMS Internal Error at Server Client Adapter!JMS Service is not started

Hi
Can any one tell me how to trouble shoot for following errors:
Failed to Create Connection! Reason: Response from the server could not be reached.
JMS Internal Error at Server Client Adapter!JMS Service is not started
The following hosts could not be reached 143:223:221:10:50310
We are trying to send the request from SONICMQ JMS to R/3 and trying to post the response to Sonic Queue. but we are facing some problems for JMS adapter .
but in JMS sender and receiver adapter i gave different IP and port for listen the SONIC queue. why it is showing in different IP here? this message got from logviewer.
regards
Rambarki...

Rambarki,
What is the error displayed on the Adapter Monitoring pages?
Generally the correct error descriptions for connectivity issues are found on adapter monitoring UI than any other.
Other possible reasons could be :
<i>JMS Service is not started
The following hosts could not be reached 143:223:221:10:50310</i> This might be issue with your network settings i.e. XI server is unable to reach the specified IP on specified port.
Regards,
Amol

Logon failure due to an internal error-webi client tool

Hi experts,
I've installed WebI client tool 4.0, when I trying to logon this message appear: Logon failure due to an internal error,
this problem has been addressed before, but could not be resolved [http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144|http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144]
there is a way to solve this problem?
regards,
Jonathan.

In a Unix environment the version is in the file “AddorRemoveProduct.sh” located in the installation folder of BI4.x
For the updated reference table of the versions / builds and corresponding patch levels, please see KB article # 1602088
BI 4.0 RTM
14.0.0.760
Patch 04
14.0.0.904
Patch 05
14.0.0.918
Patch 06
14.0.0.940
Patch 07
14.0.0.954
Patch 08
14.0.0.970
Patch 09
14.0.0.986
Patch 10
14.0.0.996
Support Pack 1
14.0.1.287
Patch 1.1
14.0.1.313
Patch 1.2
14.0.1.330
Patch 1.3
14.0.1.342
Patch 1.4
14.0.1.360
Patch 1.5
14.0.1.375
Patch 1.6
14.0.1.397
Support Pack 2
14.0.2.364
Patch 2.1
14.0.2.388
Patch 2.2
14.0.2.397
Patch 2.3
14.0.2.416
Patch 2.4
14.0.2.439
Patch 2.5
14.0.2.455
Patch 2.6
14.0.2.481
Patch 2.7
14.0.2.508
Patch 2.8
14.0.2.532
Patch 2.9
14.0.2.556
Patch 2.10
14.0.2.565
Patch 2.11
14.0.2.594
Patch 2.12
14.0.2.619
Patch 2.13
14.0.2.641
Patch 2.14
14.0.2.657
Patch 2.15
14.0.2.682
Patch 2.16
14.0.2.703
Feature Pack 3
14.0.3.613
Patch 3.1
14.0.3.630
Patch 3.2
14.0.3.657
Patch 3.3
14.0.3.678
Patch 3.4
14.0.3.691
Please note that at today FP03 is in RampUp

Upgrade 10G DB 10.2.0.1 into the 10.2.0.4 - get ORA-00600: internal error

Hi All,
Who can help me resolved the issue for ORA-00600: internal error code, arguments: [kksfbc-reparse-infinite-loop], [0x86698AC], [], [], [], [], [], []?
The warning is from 10g 10.2.0.1 to upgrade into the 10.2.0.4. it is blocking my server to do testing. :(
Edited by: Sammi_wu on Dec 23, 2008 4:04 AM

This issue is noted in ML Doc 444985.1 (Summary of Bugs and Patches for ORA-600 [kksfbc-reparse-infinite-loop]) with a solution.
HTH
Srini

Client Upgrade tool - run-time error on client?

Hello,
Iu2019m facing an issue sending out Client Upgrade Packages. The package arrives on the client, but it the install process gets stuck immediately with the Run-time error 35603.
Have you got this error below u2013 or do you have any idea what I should look for?
BR MC

Hi,
in case you are running 5.0 SP9 the note 1106147 should help.
Regards,
Wolfhard

App-v 5.0 Client Package Installation - Error Code: 0C80070003 ( App v Error Code) 74F00F0C80070003 ( Internal error Code )

Hi,
I have converted my previous version package which was build upon 4.6, using sequencer to 5.0 app-v client.
I didn't have any errors & warnings. But, when I tried to install the package , I'm getting the error with error code
Error Code:
0C80070003 ( App v Error Code)
74F00F0C80070003 ( Internal error Code )
Bala.R

Hi there,
It was my mistake and the way we published app connection groups in the past. In the past we published the applications directly through an connection group without publishing the applications themself. In app-v 5.0 sp3 I needed to publish the packages itself
also....

Internal error (-43) when trying to upgrade to 8.81.319 SP0 PL10

I am trying to upgrade from 8.81.313 PL05 to 8.81.319 PL10. After the database upgrade check completes and the upgrade begins it immediately fails when trying to upgrade the server tools and states Internal error (-43).
Please let me know what is wrong. I am logged in as Administrator and running the upgrade on the SQL 2008 server.
Regards,
Fred
Edited by: Fred Searing on Feb 3, 2012 7:31 PM

ya i have download PL 11 again. now working fine.

Client Upgrade to PL 46 Internal Error

Similar Messages

Maybe you are looking for