Client version is different on the primary server and workstations

Hi Guys,
I have a quick question.
What is the impact if the client version on the workstations are higher than the primary site version?
In our environment, some of the machines client got updated to 5.00.7804.1300. But our primary site server version is 5.00.7804.1000.
Thanks in advance.

Well, if the same major version, being SP1 or R2, then generally OK. However, between major versions, you are not supported having a higher client version (for example R2) reporting to a lower version (for example SP1).
Even within a site, with the same higher version, there should be no way to get clients installed at a higher CU than the site server. Of course, if the site server is a client, then it could be R2 CU1, and other clients being R2 CU2. But R2 CU2 would still
be installed on the site server, maybe just not the client on the site server.
And I believe as of CU2 of R2, they are not updating the Help About version to reflect CU release so that will help.
Wally Mead

Similar Messages

Running Prime Infrastructure in HA mode but the primary server won't take over from the secondary

We're running Cisco Prime Infrastructure 1.3 in High Availability mode, or atleast we're supposed to.
At first everything seemed fine. We were using the primary server and the failover worked without a hitch when we tried it.
Then the problems started. I think it was at the same time as we increased the disk-size and therefore had to fail over.
When looking into the primary server using CLI everything seems fine but the service doesn't fail back to it. We've even tried to restart the secondary server in order to force the primary server to take over but it didn't work.
In about 2 weeks we need to upgrade Prime and while doing that we would prefer to have our HA working so that we can continue monitoring our network.

Hello,
The below provided links might help you out :-
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/user/guide/maint_sys_health.html#wp1070549
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.3/release/notes/cpi_rn_13.html#wp79553

Installing different versions of Oracle on the same server

We have a client that is currently on Oracle version 9.2.0.3. There is a project beginning that will have them upgrading to either 10g or 11g(still tbd). The project will have this happening in different steps. Therefore, we will need to continue to have the 9.2.03 db up and available while certain accounts are being migrated to the newer version.
Question is - can you install 2 versions of Oracle on the same server without any issues?
Or would we be better off purchasing a separate server to install 10g or 11g.

Depending on the OS certification you should be able to run both. You'll probably have to patch up the OS though. One of my servers has 3 different Oracle homes (9.2.0.5 - 10.2.0.2).
You can check the certification by clicking on the certify tab in metalink.

Communication between the primary server the gateway server

hallo
Can I set the directional communication between the primary server the gateway server, so it feels by the following example?
And if so how?
Agent
à GW
ß GW
ß MS
*Agent communicates with GW1 and reported it
*GW SEND report to GW2
*GW2 Send the the data to MS
thanks
<o:p></o:p>
אם תגובתי פתרה את בעייתך - לחץ/י, על "סמן כתשובה" ליד סימן ה V הירוק.

Hi,
As far as I know, Gateways dont talk to each other. Why you need two GW, with one GW and report to your management servers, this way should work.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/323d5aab-bad4-4c23-b096-27a62757ae31/communications-between-2-gateway-servers-and-2-ms?forum=operationsmanagerdeployment
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

A Unified Messaging server running the same version of Exchange as the Mailbox server that hosts the user's mailbox couldn't be found.

Hi Team-
we are getting below alert in Exchange 2013 on UM server
a Unified Messaging server running the same version of Exchange as the Mailbox server that hosts the user's mailbox couldn't be found.
eventID 1647
The Microsoft Exchange Unified Messaging Call Router service rejected the call for the following reason: 15505;source="Exchange 2013 server ";reason="Couldn't find a valid Unified Messaging server to redirect the call." Microsoft.Exchange.UM.UMCore.CallRejectedException:
An incoming call with ID for user was rejected because a Unified Messaging server running the same version of Exchange as the Mailbox server that hosts the user's mailbox couldn't be found.
we have exchange 2010 and Exchange 2013.
Sender of the voice mail is on the Exchange 2013 and receiver of the voice mail is on Exchange 2010
Is this not supported scenario of Exchange 2013 UM server and Exchange 2010 mailbox server
ksrugi

You cannot and should not expect Exchange 2013 UM function for mailboxes housed in Exchange 2010. And the reverse is true as well. If you want Exchange 2013 UM to function for users, their mailboxes need to be in Exchange 2013. Exchange
2013 UM should be able to redirect calls to an Exchange 2010 UM server if it detected a call was destined for a mailbox being hosted by Exchange 2010, assuming the UM servers/roles/services are within the same UM Dial Plan.

I am trying to update my itunes to the latest version, but it says the itunes server could not be updated and i need to connect to the internet when I amlready am connected

I am trying to update my itunes to the latest version, but it says the itunes server could not be updated and i need to connect to the internet when I amlready am connected. How do I get the latest version of itunes so i can sync my iphone with itunes without losing all my songs?

We were able to fix our machine! I just could not make sense of the error message, so we were trying non-Microsoft, non-Apple solutions.
Our Solution: Install MalWareBytes, and run a Quick Scan.
Even thought both Microsoft anti-virus and Defender were running on our Windows 8 machine, MalWareBytes found about 100 problems. As I looked over the types of problem and locations, I found several that referenced the exact directory referenced in this message. The machine had to be restarted for MalWareBytes to complete the cleaning, but iTunes installed afterwards with no problems.
Thank you MalWareBytes!

Now that I have the Media server and 3 media client boxes, all

Now that I have the Media server and 3 media client boxes, all the individual lists of schedules are gone.
Is there any way to keep the seperate lists on the client boxes?
Solved!
Go to Solution.

No because the VMS is where are all the recordings are done.
Client boxes use the tuners of the VMS.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How do I locate on my I Phone 3GS the primary server

how do I verify on my mail primary server via settings? Can the primary server be changed? How?

Open iTunes on your computer and click Backup Now in iTunes under the tab for your iPhone

Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864)                   0x2B24 SharePoint Server Search      Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
8xqx High    Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask)     at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.

I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96*        w3wp.exe (0x2204)
        0x293C        SharePoint Portal Server              User Profiles
        eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal

Launch Console fails: the vnc viewer is not installed on the manager server and no local vnc viewer is found.

Hello,
I have created and started a VM image and try to configure this image, but when launching the console I get the error:
"the vnc viewer is not installed on the manager server and no local vnc viewer is found."
I've read the vnc console does not rely on a local version of the vnc client, but uses the java vnc. From the java log I get:
Java Web Start 1.6.0_43
Using JRE version 1.6.0_43-b01 Java HotSpot(TM) Client VM
User home directory = C:\Users\kgraaf
28-jun-2013 10:17:04 com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: ServiceType : VNC
28-jun-2013 10:17:04 com.oracle.ovm.ras.proxy.external.ViewerLauncherFactory getViewerLauncher
INFO: Os is : windows 7
It is not clear to me yet what is expected to be running where. My configuration is:
- VM Server 3.1 on Linux host A
- VM Manager 3.1 on Linux host B
- Connected via Windows 7 64-bit client via a browser to the Management Server. Let's call this host C
When launching the console it tries to connect to 127.0.0.1:60505 so to localhost and a port#.
- Given this information I would expect it tries to launch the vncviewer from my management server (host B).
- /usr/bin/vncviewer is installed on host B, but this appears not to be used.
- We see java vnc is started on my Windows 7 client (host C) and it tries to connect to 127.0.0.1 (localhost on my Windows client??) and not to the remote management server (host B)!?
Questions:
1 - Can someone explain what exactly is being executed (from where and to which host) when launching the console?
2 - Is this a java version / Windows 7 related configuration issue? How to fix this?
Thanks,
Klaas.

Per Oracle's website - RAN into this a few hours ago...Do it as ROOT on the VM Manager Host
http://docs.oracle.com/cd/E26996_01/E18548/html/BABFBEIF.html
It is preferred that you install either TightVNC on the Oracle VM Manager host computer. You can get the latest TightVNC package from:
http://oss.oracle.com/oraclevm/manager/RPMS/http://oss.oracle.com/oraclevm/manager/RPMS/
Install TightVNC with the command:
# rpm -ivh tightvnc-java-version.noarch.rpm

There is a compatibility range mismatch between the Web server and database

HI,
Taken backup form production environment through TSM backup utility and restore same db on UAT environment by TSM Utility, after restore got below issue, past i had done many time but working fine this time
it’s not working. Production environment have SP2010 and sql server 2008 ,UAT have same thing also.
Server Error in '/' Application.
There is a
compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can
happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and
build level to return to compatibility range.
Description: An unhandled exception occurred during the execution of the current
web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.SharePoint.Upgrade.SPUpgradeCompatibilityException:
There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within
the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack
trace below.
Stack Trace:
[SPUpgradeCompatibilityException: There is a compatibility range mismatch between the Web server and database "Portal_Contain", and connections to the data have been
blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the
database must be upgraded to the same version and build level to return to compatibility range.]
   Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.ValidateBackwardsCompatibility() +542
   Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) +63
   Microsoft.SharePoint.SPWeb.InitializeSPRequest() +258
   Microsoft.SharePoint.WebControls.SPControl.EnsureSPWebRequest(SPWeb web) +365
   Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) +520
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) +27
   Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) +918
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

Hi Bhavik,
UAT Portal_Contain DB version given below:
Version ID
Version
id
00000000-0000-0000-0000-000000000000
12.0.0.4518
1
00000000-0000-0000-0000-000000000000
12.0.0.6219
3
00000000-0000-0000-0000-000000000000
12.0.0.6327
4
00000000-0000-0000-0000-000000000000
12.0.0.6421
5
00000000-0000-0000-0000-000000000000
12.0.0.6510
6
00000000-0000-0000-0000-000000000000
12.0.0.6514
7
00000000-0000-0000-0000-000000000000
14.0.6123.5006
9
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
8
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
2
Production Version given below:
00000000-0000-0000-0000-000000000000
12.0.0.4518
00000000-0000-0000-0000-000000000000
12.0.0.6219
00000000-0000-0000-0000-000000000000
12.0.0.6327
00000000-0000-0000-0000-000000000000
12.0.0.6421
00000000-0000-0000-0000-000000000000
12.0.0.6510
00000000-0000-0000-0000-000000000000
12.0.0.6514
00000000-0000-0000-0000-000000000000
14.0.6123.5006
1A707EF5-45B2-4235-9327-021E5F9B8BB0
4.1.6.0
6333368D-85F0-4EF5-8241-5252B12B2E50
4.1.18.0
I have matched both are the exact same.
Run the below command on App server:
Upgrade-SPContentDatabase
cmdlet Upgrade-SPContentDatabase at command pipeline position 1
Supply values for the following parameters:
Identity: Portal_Contain
Confirm
Are you sure you want to perform this action?
Performing operation "Upgrade-SPContentDatabase" on Target "Portal_Contain".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help
(default is "Y"):y
WARNING: Database [SPContentDatabase Name=Portal_Contain] cannot be upgraded.
Kindly suggest
Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
|
| Twitter

How to mirror between the production server and the multiple local servers.

I am currently looking for the best way to correspond between our production server and the multiple local servers. Because the production server is the only server that holds the latest updating applications, and our local servers are located for each developer’s local machines where the all modifications and creations are done. So when the developer locally makes changes for assets or files, he creates a patch archive first, then accesses to the production side Administration console screen and imports them from Application Management screen.
We tried to find a way to see the imported date before (so we know which one has been imported as new.), but there is no show in the Administration console Application Management screen. There is Creation date but it’s set as we initially imported the full archive files, but not patch files. Since between applications have some types of the dependencies (like fragments or image files), what is the best way to keep mirroring between the production server and local servers? Or we should simply not use patch file for updating server?
Thanks,

Check out this utility : http://blogs.adobe.com/livecycle/2013/03/adobe-livecycle-configuration-migration-utility.h tml
Thanks,
Wasil

Error starting the Application Server and Deployment Tool

After installing the iPlanet Aplication Server with sp3 I get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!

Hi,
Would be more helpful if you can mention, the O/S. Also, pls mention where
you are getting this error, at kjs or kxs, or, are you able to start the server
and at which specific instance do you encounter this.
Regards
Raj
"Antonio Casqueiro" wrote:
After installing the iPlanet Aplication Server with sp3 I get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!

Error starting the Application Server and Deployment Tool in Windows 2000

After installing the iPlanet Aplication Server with sp3 in Windows 2000 I
get the following
errors starting the Application Server and Deployment Tool.
iAS Application Server
================
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:46:49:8] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
error: could not get context
*** Errors in initialization from registry ***
Errors in initialization, exiting ...
iAS Deployment Tool
===============
GXBindInit: GXBindBasic failed
GXContextInit: GXBindInit failed 2
[26/Out/2001 17:23:40:7] error: ENGINE-context_init_failed: EngineClassSpace
ContextModule.createContextInit failed:
Exception in thread "main" java.lang.NullPointerException
at com.kivasoft.util.Util.loadComponent(Unknown Source)
at
com.iplanet.ias.tools.buzz.ui.application.StartBuzz.initGDS(Unknown Source)
at com.iplanet.ias.tools.buzz.ui.application.StartBuzz.main(Unknown
Source)
Can anyone help me please!

Okay, pls check that you are logged in as administrator and installed and now you are logged in as administrator and registering the iAS server. Did you get any installation failures while installing and are you able to register the server using iASAT ?

I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information

I downloaded ios7 after being asked to restore. But now my phone wont connect to the activation server and is asking to restore again but I cant because itunes does not show any of my phone information (it just shows a blank white screen with "iphone" in the centre".

I imagine a ton of people are attempting to activate after the update, and the server is getting overloaded. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

Client version is different on the primary server and workstations

Similar Messages

Maybe you are looking for