Client working with different charset than server

Hi,
My name is Tal and I work in Mercury.
We have a situation that requires setting the client nls_lang to âAMERICAN_AMERICA.UTF8â, but the server is required to work with either âWE8DECâ or âWE8MSWIN1252â charset.
A. Is âWE8DECâ a valied option?
B. Is âWE8MSWIN1252â a valied option?
C. Is there a map of valid options, if yes please refer me to it.
Regards,
Tal Olier (972-54-497-151).

Ahh...been there, done that...
http://lfhd.blogspot.com/2008/03/first-hiccup.html
Shane

Similar Messages

WLS :: Will Vista web client work with Weblogic Server 8.1.6 over SSL?

Hello,
I have installed 51-2 bit SSL cert on weblogic 7 and found that the secure site doesn't work on Vista web client.
Weblogic gives error in handshaking and says algorithm is not supported.
Vista web client uses some algorithms which were not supported by weblogic 7.
So would like to know if would Vista web client work with Weblogic Server 8.1.6 over SSL?
Any information in this regard would be helpful.
Thanks in Advance.

can you use the following debug flags in the weblogic server as java_options and paste the complete ssl handshake exception here.
-Dweblogic.StdoutDebugEnabled=true
-Dssl.debug=true
thanks,
sandeep

RE: [forte-users] Version L Clients working with Version NServer Partit

we were not able to get this combination to work, for some reason, our cache
was not loading when we do this.
suma
-----Original Message-----
From: Bill Bhatta [mailto:[email protected]]
Sent: Wednesday, May 30, 2001 3:04 PM
To: [email protected]
Cc: Ravi; Kent Smith; John Werry
Subject: [forte-users] Version L Clients working with Version N Server
Partitions
My "L" clients are successfully communicationg with a
3.5 server partition. Anyone else doing this? Any
potential problems I need to look out for?
Bill
a year! http://personal.mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

we were not able to get this combination to work, for some reason, our cache
was not loading when we do this.
suma
-----Original Message-----
From: Bill Bhatta [mailto:[email protected]]
Sent: Wednesday, May 30, 2001 3:04 PM
To: [email protected]
Cc: Ravi; Kent Smith; John Werry
Subject: [forte-users] Version L Clients working with Version N Server
Partitions
My "L" clients are successfully communicationg with a
3.5 server partition. Anyone else doing this? Any
potential problems I need to look out for?
Bill
a year! http://personal.mail.yahoo.com/
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Can 9i client work with 8i & 7 database?

Not sure if this is the correct forum, but here's my question.
I have a 8i database which I access using a ODP.NET (VB.NET program). I also need access to an Oracle 7 database from the same application.
1) will 9i client work with 7 database?
2) if not, if I install 8i & 9i Client, can I programmatically pick which one I use (not using the oracle home selection program)?
I could create materialized view of the oracle 7 tables on the 8i database, but seems like alot of duplicated storage. If I can't get this to work I would have to resort to the Microsoft ODP for Oracle since I can use 8i client with it.
Thanks!
Bob

Wouldn't changing the system PATH variable in code alter it for every web application running? If I have multiple applications running changing the PATH to suite the current call could inadvertently affect another application. The only other solution is to run MS data provider or ODP.NET/9i on one Web server, and 8i on another.
Bob

Is it possible to work with different languages in different applications?

Hi,
is it possible to work with different languages in different applications?
To have f.e. Photoshop in English and Indesign in Dutch??
Thanks!

I am not sure about it that you can use different apps in different language in the same computer, however you can check the following links:
http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html
Adjust the install language | CCM
http://tv.adobe.com/watch/learn-creative-cloud/installing-multiple-languages-of-a-desktop- application/
Regards
Rajshree

I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened full window it immediately closes and will only work with window smaller than maximum.

I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened with the window full screen it immediately closes and will only work with window smaller than maximum. Driving me mad! Any help please!!

Hi Linc
Thank you for your response.
I'm a bit of an amateur so I hope below is the information you've asked for:
Step 1
23/11/2014 09:19:14.007 ReportCrash[294]: Saved crash report for Finder[4349] version 10.10.1 (10.10.1) to /Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091914_BBBB-MacBoo k-Pro-2.crash
23/11/2014 09:19:14.008 ReportCrash[294]: Removing excessive log: file:///Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091840_BBBB -MacBook-Pro-2.crash
23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x103809000): p=4357[Finder] final status 0x3000a00, denying page sending SIGKILL
23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: process 4357[Finder]: rejecting invalid page at address 0x103809000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder[4357]) Binary is improperly signed.
23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder) Service only ran for 0 seconds. Pushing respawn out by 1 seconds.
23/11/2014 09:19:15.584 Finder[4359]: assertion failed: 14B25: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x10bfbf000): p=4359[Finder] final status 0x3000a00, denying page sending SIGKILL
23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: process 4359[Finder]: rejecting invalid page at address 0x10bfbf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
Step 2
Process:               Finder [4626]
Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier:            com.apple.finder
Build Info: Finder_FE-932001003000000~1
Responsible:           Finder [4626]
PlugIn Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
PlugIn Identifier:       com.apple.finder
-0 sec                         CODE SIGNING: cs_invalid_page(0x10c9a5000): p=4626[Finder] final status 0x3000a00, denying page sending SIGKILL
-0 sec                         CODE SIGNING: process 4626[Finder]: rejecting invalid page at address 0x10c9a5000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-2 sec                         CODE SIGNING: cs_invalid_page(0x10c5b3000): p=4624[Finder] final status 0x3000a00, denying page sending SIGKILL
-2 sec                         CODE SIGNING: process 4624[Finder]: rejecting invalid page at address 0x10c5b3000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-3 sec                         CODE SIGNING: cs_invalid_page(0x10f4bd000): p=4622[Finder] final status 0x3000a00, denying page sending SIGKILL
-3 sec                         CODE SIGNING: process 4622[Finder]: rejecting invalid page at address 0x10f4bd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-5 sec                         CODE SIGNING: cs_invalid_page(0x105ecf000): p=4620[Finder] final status 0x3000a00, denying page sending SIGKILL
-5 sec                         CODE SIGNING: process 4620[Finder]: rejecting invalid page at address 0x105ecf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
-7 sec                         CODE SIGNING: cs_invalid_page(0x1012cd000): p=4617[Finder] final status 0x3000a00, denying page sending SIGKILL
-7 sec                         CODE SIGNING: process 4617[Finder]: rejecting invalid page at address 0x1012cd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
--> __TEXT 000000010c966000-000000010ce55000 [ 5052K] r-x/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    __DATA 000000010ce55000-000000010cf53000 [ 1016K] rw-/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
0   com.apple.finder                                 0x000000010c9a521f 0x10c966000 + 258591
10 com.apple.finder                               0x000000010c9977b5 0x10c966000 + 202677
11 com.apple.finder                               0x000000010c988154 0x10c966000 + 139604
12 com.apple.finder                               0x000000010c987e15 0x10c966000 + 138773
13 com.apple.finder                               0x000000010c987d35 0x10c966000 + 138549
14 com.apple.finder                               0x000000010c987cfd 0x10c966000 + 138493
28 com.apple.finder                               0x000000010c96b960 0x10c966000 + 22880
1   com.apple.finder                                 0x000000010c98a69d 0x10c966000 + 149149
2   com.apple.finder                                 0x000000010c98aba7 0x10c966000 + 150439
3   com.apple.finder                                 0x000000010c9795d2 0x10c966000 + 79314
4   com.apple.finder                                 0x000000010c98aa0b 0x10c966000 + 150027
5   com.apple.finder                                 0x000000010c98a952 0x10c966000 + 149842
6   com.apple.finder                                 0x000000010c98a78a 0x10c966000 + 149386
7   com.apple.finder                                 0x000000010c979496 0x10c966000 + 78998
8   com.apple.finder                                 0x000000010c98a548 0x10c966000 + 148808
9   com.apple.finder                                 0x000000010c98a410 0x10c966000 + 148496
10 com.apple.finder                               0x000000010c983df6 0x10c966000 + 122358
       0x10c966000 -        0x10ce54ffb com.apple.finder (10.10.1 - 10.10.1) <33C3024A-4A16-3485-B2B1-89FA33B9558A> /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Many thanks
David

BYOD Solution with different product than Cisco ISE

Hello,
Will it possible to make BYOD WiFi with different product than cisco ISE? such as Dell ClearPass or some sort of other product which does support Cisco WLC 5508.
Regards,

Sure it's possible... Dell resells Aruba's ClearPass, so really it's up to the vendor implementing ClearPass to understand what is possible or not. Both ISE and ClearPass does OnBoarding, which is used for BYOD. Both require licenses for this added feature also. There might be other ways to achieved BYOD, but it depends in what you want and what the product can do.

Moveing average price after posting invoice with different value than GR

Hello all
I have a question as in subject.
If I will post goods receipt and after this I would like to post an invoice in MIRO with different value than in goods receipt , the MAP on my stock will change about this different???

Hi,
Your MAP will get recalculated as the price difference will change the total value of the stock and the stock quantity will remain the same
MAP=Total value/Total stock
Hope this will help you
Reward if useful
Thanx and Regards
SHYAM.R

Lync 2013 sql mirroring with different doamin sql server.

Hi,
can I create lync BE sql mirroring with different domain sql server with one AD forest?
Thanks.

Hi,
You can note the sentence “Using Topology Builder or cmdlets to set up and remove SQL mirroring is supported only when the primary, mirror, and witness (if desired) servers all belong to the same domain. If you want to set up SQL mirroring among servers
in different domains, see your SQL Server documentation.” In the link below:
http://technet.microsoft.com/en-us/library/jj204992.aspx
So I think in Lync server if you use Topology Builder or cmdlets to set up and remove SQL mirroring only if when the primary, mirror, and witness (if desired) servers all belong to the same domain. If you want to set up SQL mirroring among servers in different
domains you may do some steps on SQL server and you can also post a case on SQL forum, thank you for your understanding.
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Client Exclusion Policies on WLC not working with ISE as RADIUS Server

Hi,
for our Guest WLAN (Security Setting for this SSID:Layer2: MAC filtering, Layer3:none) we use ISE as RADIUS Server. On WLC I enabled client exclusion polices and checked all options (Excessive 802.11 Auth. Failures etc..).. But even if a client fails 20times at authentication, it is not excluded on the wlc. It works with other SSIDs, where security settings are set to 802.1x.
Am I missing any settings here or do you have some tipps on how to troubleshoot this?
Thanks very much!

Hi Renata,
If those guest failures are not associated with valid guest users (i.e. people who have forgotten their account or entering the wrong password) there isn't anything that can be done. The main point of Guest WLAN is to make it as easy as possible for Guests - individuals with device configurations you don't want to deal with or know about, to connect your network for internet access. From a WiFi/802.11 perspective, the standard Guest WLAN setup means its easy for any device to connect.
If your Guest WLAN has the following:
SSID is broadcast enabled, Security = OPEN, Encryption = none, then any 802.11 device can find the WLAN via passive scanning and connect. And any device that connects will get the ISE portal. Once recieveing that portal they can guess away at valid username/password.
I would suspect that unless your Guest WiFi is adjacent to a Mall, school, hotel or other hi-density area of individuals with time and electronics on their hands, other than alerts in your ops window and logs, resources associated with this (WLC & ISE) are very low.
You can try and dull the noise a few ways.
Option 1. create and ISE log filter on those alerts so they don't cluter the console.
Option 2. Stop broadcasting the SSID. This is not a security measure, but will cut volume of people connecting to the SSID significantly. You will have to tell your guests what SSID or include it in their credential communication.
Option 3. Put a very simple PSK on the SSID. The PSK will become a public secret - shared with valid guests, doesn't have change as it's purpose is not security. You will have to include this information on their credential communication.
Option 4 - both 2 and 3
The most effective option would be 3.
Good Luck!

How to work with different JDKs on SJSAS PE/EE 8.x domains/server instances

Using this workaround it will be possible to use different versions of java (jdk) for different domains and server instances on a single 8.x PE and/or EE installation. Please make sure that the updated jdk is compatible with application server and the application(s) for which it is being updated. Tested on Solaris as of now.
01 Create a copy of the existing asenv.conf and update the AS_JAVA property to point to the new jdk.
cd <sjsas-install-directory>
create a directory called 'new-config'
copy config/asenv.conf to new-config/asenv.conf
cd new-config
edit asenv.conf and update AS_JAVA property with the desired jdk location
02 Modify the domain/instance specific startserv and stopserv scripts so that they point to new asenv.conf.
Modify the startserv and stopserv scripts in <domain-dir>/bin for domains and <instance-dir>/bin for instances for which the jdk needs to be modified.
for ex. to change the startserv and stopserv scripts for a server instance under node agent.
cd <sjsas-install-directory>/nodeagents/<node-agent>/<server-instance>/bin
edit startserv and change the asenv.conf location.
ASENV_CONF_LOCATION=<sjsas-install-directory>/new-config
edit stopserv and change the asenv.conf location.
ASENV_CONF_LOCATION=<sjsas-install-directory>/new-config
03 Restart the domain/instance to use the updated jdk.
Thanks to Prabhu Velayutham for sharing this work around.
[email protected]

Tested and found that the above workaround is valid for windows-xp as well.
On windows the corresponding files are named asenv.bat, startserv.bat and stopserv.bat.
[email protected]

How to get remote ejb client working with Weblogic 8.1?

I have Weblogic 8.1 running on a WinXP box behind my firewall. Port 7001 is open to WL and remote browsers can access the console.
I have a client machine running WinXP on a different network that is remote to the WL server. It can ping the WL server machine.
I use JVM 1.4.2_08 on all machines.
If I put my client machine on the LAN with the WL server, then my EJB test client works fine. If I put the client machine on the remote network then the test client fails with a ClassCastException when trying to do a PortableRemoteObject.narrow on the bean home.
I had this running fine on JBoss 3.22 using RMI over HTTP. I added an HTTP invoker service to my jboss.xml file. I don't know if something similar is needed on the Weblogic side - any ideas on that? All I've done on the WL side is turn on Tunneling - which obviously works because the remote client gets a correct home object when doing a lookup on the bean - based on the IOR string of the home obj.
Below I include my client code, exception, ejb-jar.xml and my weblogic-ejb-jar.xml.
Any ideas on what else needs to be done so that a remote client can do a PortableRemoteObject.narrow? My client.jar has all of the EJB classes, and runs fine when run from LAN.
Thanks,
--BobC
Client Code
Properties p = new Properties();
p.put("java.naming.factory.initial", "weblogic.jndi.WLInitialContextFactory");
p.put("java.naming.provider.url", "http://66.114.140.213:7001");
InitialContext ic = new InitialContext(p);
// Test register bean
Object homeObj = ic.lookup("tacplanner/register");
RegisterHome home = (RegisterHome) PortableRemoteObject.narrow(homeObj, RegisterHome.class); // <<< ClassCastException here
Exception
java.lang.ClassCastException
at com.sun.corba.se.internal.javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:293)
at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:134)
at com.nimblus.tacplanner.test.TestUtils.<init>(TestUtils.java:60)
at com.nimblus.tacplanner.test.TestUtils.main(TestUtils.java:196)
ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN' 'http://java.sun.com/j2ee/dtds/ejb-jar_1_1.dtd'>
<ejb-jar>
<enterprise-beans>
<session>
<ejb-name>register</ejb-name>
<home> com.nimblus.tacplanner.server.ejb.stateless.RegisterHome</home>
<remote> com.nimblus.tacplanner.server.ejb.stateless.Register</remote>
<ejb-class>com.nimblus.tacplanner.server.ejb.stateless.RegisterSession</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<description>The Oracle Datasource</description>
<res-ref-name>java:/OracleDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
</enterprise-beans>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>register</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</ejb-jar>
weblogic-ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN'
'http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>register</ejb-name>
<stateless-session-descriptor>
<pool>
<max-beans-in-free-pool>100</max-beans-in-free-pool>
</pool>
</stateless-session-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/OracleDS</res-ref-name>
<jndi-name>OracleDS</jndi-name>
</resource-description>
</reference-descriptor>
<enable-call-by-reference>True</enable-call-by-reference>
<jndi-name>tacplanner/register</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
--------------------

Problem solved.
For remote clients you need to generate and use the stub classes for EJB interfaces using Weblogic's appc utility.
See: "http://e-docs.bea.com/wls/docs81/ejb/appc_ejbc.html#1151900"
--BobC

Will 8i Client work with 10g DB?

We currently use an 8i client install to enable ODBC and Oracle Discoverer access to an 8i database.
We need to upgrade the database to 10g, but we may not be able to upgrade the client from 8i.
Will the 8i client work properly/reliably against the 10g database with respect to ODBC and Oracle Discoverer?

Hi,
There is a very good Metalink note about Interoperability Between Different Oracle Versions : 207303.1 - Client / Server / Interoperability Support Between Different Oracle Versions.
Server 10.1 and client 8.1.7 is supported by Oracle ( Supported for customers under Extended Maintenance (EMS) only), if it supported, it should be work.
Nicolas.

PDF Embed is not working with BRAZILIAN Charset

Hello,
a strange thing is happening with my reports server 9i.
I have Oracle 9ias R2 with 9.0.2.3 patchset and Forms and Reports 9.0.2.3 patchset installed on Red Hat Linux.
I have a report that uses a post script barcode font, and i'm using the PDF Embed feature to incorporate this font in the reports.
The problem is that everything works fine when the NLS_LANG is defined to AMERICAN_AMERICA.WE8ISO8859P1, the barcodes are showing correctly. But, when i set the NLS_LANG="BRAZILIAN PORTUGUESE_BRAZIL.WE8ISO8859P1" only a small initial part of the barcodes is showed on the screen.
I have to use this charset because my database is using it. With the AMERICAN charset the dates and other kind of stuff are showed in english.
Resuming, i need to use the PDF Embed font with the charset defined to BRAZILIAN PORTUGUESE_BRAZIL.WE8ISO8859P1.
Is this some kind of bug??
How can i solve this issue??
Thank you all.
Marcus Santos
([email protected])

Marcos,
Experimente fazer a convers�o do valor para caracteres em ASCII conforme tabela do Bar Code 2/5.
Voce associa a coluna de formula ao fonte bar25 i.. e dentro da fun��o vc converte cada par de caracter ao valor correspondente..
Espero que te sirva...
Um abra�o
Ary

Does the Citrix ICA client work with Safari for Windows XP?

I really like safari for XP so far. However, I use the Citrix ICA client software to remotely access programs from a server at work. I tried following instructions on the Citrix knowledge base site for installing the client for Firefox, etc. since they did not have any info on Safari for windows. Please help, or I will be stuck using Explorer. Thanks.

The Citrix ICA client doesn't work with Safari on a Mac. Given the number of bugs and other problems with the Safari 3 Beta for Windows, I'd guess that the chances of Citrix working with this release are slim to none. However, the Citrix ICA client works well with Firefox 2.0, in case you're interested in trying it.

Client working with different charset than server

Similar Messages

Maybe you are looking for