Client x.x.x.x is not known to the message server
Hi,
One of my customers is getting strange messages in the Development system of their SRM landscape. The messages are:
Client x.x.x.x is not known to the message server
Where x.x.x.x is the IP address of a workstation. The messages occur a few times per day, and they are always grouped. There are always about 5 identical messages with the same IP, but the next occurence may be from a different IP. Also, the QAS and PRD systems are configured identically (as far as I know) but they do not have this message.
I do not understand why this message occurs. The "clients" of a message server are it's application servers, not the connected workstations. The users/developers are not doing anything special at this time. There are no dumps, the messages only appear in ST22.
At another forum it was suggested that the problem may be with the printers in SPAD (there was one type F printer which I chaged to type G and eventually removed, but no change) or with the operation modes. I was also asked to check the logon groups. Everything seems normal there too.
Does anyone have any idea where to look?
Thanks
Mischa
Check this SAP NOTE ...The R/3 System relies on the operation system to resolve names and IP-addresses of other hosts (for example, host names of other Application Servers in the same R/3 system or IP-addresses of client computers that access the system).
Try adding the host entries of R/3 system(Messager server) on Client computer and check if it works.
Note 124562 - Hostname resolution problems (DNS timeouts)
Similar Messages
-
Client PRD01_PRD_00 is not known to the message server
Hi,
I get a lot of user disconnects (SM21) and update deactivation (SM13). From the system log I get the following error. Are they related? How can I fix this?
Client PRD01_PRD_00 is not known to the message server
Client PRD02_PRD_00 is not known to the message server
Transaction Canceled BT 510 ( )
Perform rollback
Operating system call recv failed (error no. 10054)
Connection to user 24070 (BUCHANR ), terminal 112 (MB02159PC ) lost
Please adviseHi Ferrari,
I have the same problem here.
Can you tell me how solution do you apply?
Best regards,
Marcelo Moraes -
Client is not known to the message server
Hi,
I've search SAP Notes but could not find any answer to my problem. I am running 4.7 (620) on Ora 9i, Windows 2000 Advanced Server and kernel 155. We have 2 application servers and one DB server.
I get an error message every 5 minutes in the system log reading:-
Client PRD01PRD_00 is not known to the message server
Client PRD02PRD_00 is not known to the message server
This message translates in dev_w0 as follows:-
ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 16132]
ERROR => ThSysAdmMsg: ThAdmSend [thxxab.c 6903]
Please advise on a solution.Dear Ferrandi,
this is an attempt to send an ADM message to a given instance. The problem is that the message server is not aware of such an instance. If you say that this happens every 5 minutes, it will be some kind of automatic job trying to speak to an instance not available in the system. I would suggest that you reset the trace files, then switch the trace level of the first three dialog work processes to 2 (components taskhandler, abap proc., and scrn. proc.) and then set the profile parameters
rdisp/TRACE_LOGGING = on, 10m
rdisp/TRACE_PATTERN_0 = ERROR => ThSysAdmMesg: ThAdmSend
so that tracing will stop as soon as the problem happens again. Do post the work process trace file that has the error message here or send it via mail to me so that I can check which report is being run.
Best Regards,
Tim -
System went down after this message Client is not known to the mess server
Hi Guru's,
I am running 4.6c on Ora 8i, Windows 2000 Server. We have 1 application server. The central instance and DB is on same host.
<b>Initially i got following error message 2 times in the system log reading:-</b>
No free memory available in class PERM . Memory block ID "abtsv2", 958955044 bytes
<b>After above message I got an information message Continuously 30 minutes in the system log reading:-</b>
Client cinsapp1_PRI_00 is not known to the message serve
<b>Then stoped the workproccess one by one</b>
Stop Workproc 5, PID 4800
Stop Workproc13, PID 4468
Stop Workproc18, PID 4508
Stop Workproc11, PID 4452
Stop Workproc14, PID 4476
Stop Workproc12, PID 4460
Stop Workproc17, PID 4500
Stop Workproc24, PID 4560
Stop Workproc23, PID 4552
Stop Workproc25, PID 4576
Stop Workproc10, PID 4444
Stop Workproc16, PID 4492
Operating system call recv failed (error no. 10054)
Operating system call WSASend failed (error no. 10053)
<b>Finally R/3 system was stoped.</b>
Please let me know the process how to check the trace for this problem. If any body got same problem please suggest me how can i resolve this problem.
Thanks in advance,
RameshHi Experts,
How you fixed this issue, Please share with us.
because i am also facing the same problem in one of our SAP server.
Thanks & regards,
Pandiyan -
Dispatcher Died after not able to reach message server
Hi Gurus,
My Dispatcher is not able to connect to MS. Please note I am using windows/oracle. After som time disp+work died. Here I am posting latest dev_disp log. Please suggest.
regards-JASWANT
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC5
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, optimized
pid 3096
Mon Apr 27 11:01:58 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3096) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Apr 27 11:02:03 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >hpnwecc_EC5_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05970040, size: 4930904)
DpShMCreate: allocated sys_adm at 05970040
DpShMCreate: allocated wp_adm at 05972090
DpShMCreate: allocated tm_adm_list at 05976980
DpShMCreate: allocated tm_adm at 059769B0
DpShMCreate: allocated wp_ca_adm at 05D894B0
DpShMCreate: allocated appc_ca_adm at 05D8F270
DpShMCreate: allocated comm_adm at 05D911B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05E12070
DpShMCreate: allocated gw_adm at 05E120B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05E120E0
DpShMCreate: allocated wall_adm at 05E120E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Mon Apr 27 11:02:04 2009
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 755 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 5940
argv[0] = E:\usr\sap\EC5\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\EC5\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\EC5\SYS\profile\EC5_DVEBMGS00_hpnwecc
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC5
argv[7] = -DSAPMYNAME=hpnwecc_EC5_00
argv[8] = -DSAPPROFILE=E:\usr\sap\EC5\SYS\profile\EC5_DVEBMGS00_hpnwecc
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
Continued...........continued
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0F=> DpLoopInit, nomstry () [dpxxdisp.c 1720]
ERROR => Connection to Message Server failed - check installation [dpxxdisp.c 1721]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
Mon Apr 27 11:02:07 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 3 / sock 1500
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3319) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5940)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Apr 27 11:02:44 2009
ERROR => DpHdlDeadWp: W0 (pid 5680) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 4888) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4208) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 444) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 5312) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4880) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W6 (pid 6120) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W7 (pid 2604) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W8 (pid 4688) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 2636) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W10 (pid 6012) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W11 (pid 2428) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => DpHdlDeadWp: W12 (pid 5256) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:02:54 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 27 05:32:54 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 5680 Ended no 1 0 0
1 DIA 4888 Ended no 1 0 0
2 DIA 4208 Ended no 1 0 0
3 DIA 444 Ended no 1 0 0
4 DIA 5312 Ended no 1 0 0
5 DIA 4880 Ended no 1 0 0
6 UPD 6120 Ended no 1 0 0
7 ENQ 2604 Ended no 1 0 0
8 BTC 4688 Ended no 1 0 0
9 BTC 2636 Ended no 1 0 0
10 BTC 6012 Ended no 1 0 0
11 SPO 2428 Ended no 1 0 0
12 UP2 5256 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 27 05:32:54 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 9
wake_evt_udp_now 0
wake events total 7, udp 6 ( 85%), shm 1 ( 14%)
since last update total 7, udp 6 ( 85%), shm 1 ( 14%)
Dump of tm_adm structure: Mon Apr 27 05:32:54 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T13, U14, , tr-12-05, 11:02:30, M0, W-1, , 1/0
RM-T14, U15, , tr-12-08, 11:02:31, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Mon Apr 27 05:32:54 2009
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:02:59 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >hpnwecc_EC5_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4884) (SOFT_KILL)
Stop icman
killing process (4708) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1500 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1500 (pos=2)
SiSelNRemove: removed sock 1500
NiSelIRemove: removed hdl 3
DpDelSocketInfo: del info for socket 3 (type=3)
NiICloseHandle: shutdown and close hdl 3 / sock 1500
NiBufIClose: clear extension for hdl 3
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1240810384/282000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 187 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 14 elems in tmadm_inuse_list
send SHUTDOWN to REM TM 14
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T14
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T14 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 1452 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 1452
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 1452
NiBufIClose: clear extension for hdl 5
dp_tm_adm[14].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1240810384/282000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 14
DpListInsert: insert elem 14 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 14 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4884 HANDLE:1568)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:00 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4884 HANDLE:1568)
wait for end of icman
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:01 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:02 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:03 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:04 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:05 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4708 HANDLE:1572)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 27 11:03:06 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4708 HANDLE:1572)
[DpProcDied] Process died (PID:5940 HANDLE:1552)
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3096) [dpxxdisp.c 10421]
Good Bye ..... -
This field name is not known. on the server
I have an issue using RPT file to generate a report using my .NET web app on the server, locally the report is generated fine, but on the server it's giving me the error "The field name is not known":
[COMException (0x80041019): This field name is not known.
Details: errorKind
Error in File FormListAddons {74708A80-A1B6-494F-A141-C83C61F45047}.rpt:
Error in formula Object_Visibility:
'{visa_clients.addon1} = ""'
This field name is not known.
Details: errorKind]
CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +362
[FormulaException: This field name is not known.
Details: errorKind
Error in File FormListAddons {74708A80-A1B6-494F-A141-C83C61F45047}.rpt:
Error in formula Object_Visibility:
'{visa_clients.addon1} = ""'
This field name is not known.
The line mentioned above causing the error, is a script on crystal report to suppress the field if this condition is met:
{visa_clients.addon1} = ""
My PC is running Crystal Report version 11, however the Crystal Report runtime on the server running the version 10.5.1.0
Both locally and on the server, i'm using the same datasource. Even locally i'm connecting the database on the Server.
I would appreciate your help.It seems i'm posting in the wrong forum, please guide where can I post this question, to find someone who could have experience with Visual Studio and Crystal Report.
I have 3 RPT files on my project, 2 generated successfully, only one is failing, because i'm using a script on the RPT file to suppress a field if the value is null or empty.
So the statement of Crystal Report version 11.x not working with SQL Server 2012 is totally out of the subject.
here is my code, for someone who knows how to read it:
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
System.IO.DirectoryInfo TemplatesPath = new System.IO.DirectoryInfo(System.Web.Hosting.HostingEnvironment.MapPath("~/rptTemplates"));
string templateFile = TemplatesPath + "/" + "FormListAddons.rpt";
rpt.Load(templateFile);
var table = dbmgr.listClients(in_group_id);
rpt.SetDataSource(table);
System.IO.DirectoryInfo FilePath = new System.IO.DirectoryInfo(System.Web.Hosting.HostingEnvironment.MapPath("~/UserGeneratedReports"));
string FileName = "FormList_" + in_group_id.ToString() + ".pdf";
if (System.IO.File.Exists(FilePath + "/" + FileName))
System.IO.File.Delete(FilePath + "/" + FileName);
rpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, FilePath + "/" + FileName);
rpt.Dispose();
rpt.Close(); -
My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forcing close again? does anyone have a solution to the above problem?
You mean the default OS X mail app? Try reinstalling OS X Yosemite if that's the case.
If you are referring to 3rd party mail applications, that's a compatibility issue. Some apps don't work in the new operating system. You have to wait until the developer updates the app, or you have to revert back to Mavericks to continue using it. -
I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.
Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)? That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both? Or more?
I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details. The BT email client set-up starts here. -
E2E RCA - The requested query / does not exist on the current server
Hi All,
The RCA for managed system is configured successfully and we are getting EWA for JAVA also.
But when i try to look at the statistics through Workload Analysis it gives error "The requested query / does not exist on the current server" and "unknown or deleted query".
I again tried to run CCMSBI_SETUP_E2E report but the problem STILL persists.
Please let me know what are the other methods i shall try.
Thanks,
RohanHi,
Our solution manager is in EHP1 SP23 and BI content is on 704 SP05.
Firstly the BI was configured in 001 client, we changed it to production client and activated the source system as mentioned in SOLMAN_SETP -> Basic configuration.
Later i found out the there are no queries. I already told to update the BI content and SAP BW patch to SP06.
Do you think it will work?
Thanks and regards,
Rohan -
Hello,
I have created and started a VM image and try to configure this image, but when launching the console I get the error:
"the vnc viewer is not installed on the manager server and no local vnc viewer is found."
I've read the vnc console does not rely on a local version of the vnc client, but uses the java vnc. From the java log I get:
Java Web Start 1.6.0_43
Using JRE version 1.6.0_43-b01 Java HotSpot(TM) Client VM
User home directory = C:\Users\kgraaf
28-jun-2013 10:17:04 com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: ServiceType : VNC
28-jun-2013 10:17:04 com.oracle.ovm.ras.proxy.external.ViewerLauncherFactory getViewerLauncher
INFO: Os is : windows 7
It is not clear to me yet what is expected to be running where. My configuration is:
- VM Server 3.1 on Linux host A
- VM Manager 3.1 on Linux host B
- Connected via Windows 7 64-bit client via a browser to the Management Server. Let's call this host C
When launching the console it tries to connect to 127.0.0.1:60505 so to localhost and a port#.
- Given this information I would expect it tries to launch the vncviewer from my management server (host B).
- /usr/bin/vncviewer is installed on host B, but this appears not to be used.
- We see java vnc is started on my Windows 7 client (host C) and it tries to connect to 127.0.0.1 (localhost on my Windows client??) and not to the remote management server (host B)!?
Questions:
1 - Can someone explain what exactly is being executed (from where and to which host) when launching the console?
2 - Is this a java version / Windows 7 related configuration issue? How to fix this?
Thanks,
Klaas.Per Oracle's website - RAN into this a few hours ago...Do it as ROOT on the VM Manager Host
http://docs.oracle.com/cd/E26996_01/E18548/html/BABFBEIF.html
It is preferred that you install either TightVNC on the Oracle VM Manager host computer. You can get the latest TightVNC package from:
http://oss.oracle.com/oraclevm/manager/RPMS/http://oss.oracle.com/oraclevm/manager/RPMS/
Install TightVNC with the command:
# rpm -ivh tightvnc-java-version.noarch.rpm -
How do i attach a file to an email as an attachment and not embeded in the message?
how do i attach a file to an email as an attachment and not embeded in the message?
This question has been asked and answered several times already.
Any file attached to an e-mail message is an attachment. There is no other possibility -- the mail protocol does not allow it.
However, different e-mail clients may have different ways of displaying or viewing attachments, depending on their settings and the type of file attached.
If you're having problems with Windows users complaining about your messages, follow these instructions
<http://docs.info.apple.com/article.html?path=Mail/4.0/en/9965.html> -
Could not connect to the GSM Server
Hi,
I am trying to login to Financial Reporting Studio but I get the error dialog box-
*"Could not connect to the GSM Server <servername>:6800"*
Before starting the studio, I even started Essbase. Even the BI+ reporting service is started..
Do I have to configure anything..?
Please let me know
Thanks,On the client side there IS a minor configuration step for Financial Reporting but I doubt it's causing your issue:
Start | Programs | Foundation Services | Configuration Utility | Hyperion Reporting and Analysis | Configure Financial Reporting
The only time I've gotten the GSM error you have was when I changed my SQLServer from 2000 to 2005 which also changed the default SQLServer port in the process (on a Dev box) and was never able to resolve it to get it to recognize the GSM again so I had to re-do all the installs.
Is this a new install? what version? Can you tell us more about your Hyperion and RDBMS environment?
Good luck,
Karen -
My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that
Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue. -
My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that
Try this...
have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
That resolution came from another thread on this issue, and this did solve to poster's issue. -
I am trying to create another email account with Talktalk. I already have one account.
I try to input the new email address and password and get a failed message
'Mail could not lot into the mail server talktalk.net.
I have tried several times and keep getting the same message.
Any ideasAccessing your emails from any computer connected to the Internet or from a Smart phone should be straightforward.
For help on how to set up your e-mail on some of the most common software applications and devices, see How do I set up my TalkTalk email?
If your software application or device isn't listed, all you need to connect to your TalkTalk e-mail mailbox are the TalkTalk e-mail settings. Make sure you use the right email settings for your specific email address.
TalkTalk email addresses only
Login / Username
[email protected]
[email protected]
Incoming mail server
mail.talktalk.net
mail.talktalk.net
Incoming Port
110
143
Outgoing mail server
smtp.talktalk.net
smtp.talktalk.net
Outgoing Port
587
587
Outgoing SSL
Yes
Yes
Outgoing Authentication
Yes
Yes
Maybe you are looking for
-
Report OPEN and CLOSE in computers client
Post Author: B.prata CA Forum: Crystal Reports I have an application developedin Visual Basic with report in the CR 4.6, but in the computers customers when I will access the application,I try to emit a report , it opens and close the report. What ca
-
Office 2013 local Click to Run deployment error
I have downloaded the x32 version of Office2013 to a local deployment share, making use of the Office Deployment tools. The download succeeded. Share is read access for everyone. When launching the installer from the share, on a x64 Win7 client, the
-
BI Admin Tool crashes when importing from Essbase
Hi folks, I'm trying to import an Essbase cube into my OBIEE RPD and it is causing the Admin Tool to crash with a generic Windows error msg that "BI Admin Tool has stopped working and Windows is looking for a solution".. I'm using OBIEE 10.3.1.4 with
-
Is it possible raise a trigger for particular user
hi, i have oracle user zil,i want to write trigger for this user.. with out writting trigger for each table . for ex: i have 2 tables in this user 1.emp 2.audit_log suppose i m inserting values into emp table at the same time insert into audit_log wi
-
I'm unable to locate the "Notes" app in my desktop iTunes App folder, however the "Notes" app is found on my iPhone and iPad ? Why am I unable to locate the "Notes" app at my desktop iTunes App folder. How can I sync the "Notes" entry information f