Clients no received ip address from Non-root APs

I have 3 AP,  one roor and Non-root. The Root AP is connected to ADSL modem which provide DHCP.
the clients form root AP received IP without problem, but whe I try to associate to  non-root AP I can not receive ip from DHCP.
What it could be the reason???
I hope any of you can help me...
regards
ROOT#sh cdp nei
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
                  S - Switch, H - Host, I - IGMP, r - Repeater
Device ID        Local Intrfce     Holdtme    Capability  Platform  Port ID
NON-ROOT1        Vi-Dot11 0         177          T I      AIR-AP124 Vi-Dot11 0
NON-ROOT2        Vi-Dot11 1         145          T I      AIR-AP124 Vi-Dot11 0
ROOT#
ROOT#
ROOT#sh dot11 associations
802.11 Client Stations on Dot11Radio0:
SSID [enlace] :
MAC Address    IP address      Device        Name            Parent         Stat
e
0021.00d6.6459 169.254.32.107  Br-client     -               003a.9924.2ba0 Asso
c
0025.9cab.3073 0.0.0.0         Br-client     -               003a.9933.e070 Asso
c
003a.9924.2ba0 192.168.1.249   bridge        NON-ROOT2       self           Asso
c
003a.9933.e070 192.168.1.251   bridge        NON-ROOT1       self           Asso
c
58b0.3568.372c 169.254.68.25   Br-client     -               003a.9924.2ba0 Asso
c
c417.fe02.645f 192.168.1.64    Br-client     -               003a.9924.2ba0 Asso
c
d8a2.5e49.5a83 0.0.0.0         Br-client     -               003a.9924.2ba0 Asso
c
ROOT#
ROOT#sh ver
Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.4(21a)JA1, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 16-Sep-09 19:06 by prod_rel_team

Hi Surendra,
I set static IP on interface BVI1 on non-root1 and non-root2, also root-bridge I can ping to both of them, in fact I access  to them via web and telnet.
I also set ip helper-address on interface Dot11Radio0 in all APs root and non-root..
My mind is about to crash...I don´t know what else to try.
thanks for your time.

Similar Messages

  • Clients not receiving dchp addresses from server

    Our dhcp server (windows 2012) is failing to issues addresses to the pc's. Once the lease has expired on the pc (user goes on holiday for a week) the machine will fail to pick up an ip address on the users return.
    The event viewer on the server reads "IP address range of scope is 95 percent full with only 7 IP address available"
    I have gone through the dhcp scope of which there are 94 exclusions and i have a further 39 machines which require addresses. 
    On a class C subnet i should have far more than 7 addresses available.
    Any thoughts as to what might be at fault here.  
    This topic first appeared in the Spiceworks Community

    Just completed a major network upgrade... So decided it was time to stack some ofmy old switches! Can anyone date some of these things?And some before and after shots: The first one is of a distribution cabinet (2 x 10Gig Fiber link ag. to server room) on the other side of our site, the last two are of the core cabinet in my server room. Will take some more pictures later.

  • APs unable to receive IP address from DHCP (core 6500 series switch)

    Dear Friends,
    a week ago I had stable wireless network APs were getting IPS from 6500 series switch (DHCP) but unfortunately some WISM got rebooted and now APs are unable to receive IP address from Core 6500 DHCP, to cater this issue  I have another DHCP server configured on windows 2008  i created another subnet and and put APs in that vlan now all APs are are successfully receiving IPS from windows DHCP server I don't know why APs are not able to receive IPs from core 6500 series DHCP.
    please advice
    Thanks
    Faysal

    Thanks george for stepping up here is DHCP config
    ip dhcp excluded-address 10.10.30.1 10.10.30.20
    ip dhcp excluded-address 10.10.8.1 10.10.8.10
    ip dhcp excluded-address 192.168.10.1 192.168.10.5
    ip dhcp excluded-address 10.9.20.1 10.9.20.30
    ip dhcp pool vlan_30
    network 10.10.30.0 255.255.254.0
    default-router 10.10.30.1
    option 60 ascii """"""""""""""""""""""""CiscoAPc1250""""""""""""""""""""""""
    option 43 hex f110.0a0a.1e0b.0a0a.1e0d.0a0a.1e0f.0a0a.1e11
    dns-server 10.10.2.11
    lease infinite
    ip dhcp pool WiSM1_SP
    network 192.168.10.0 255.255.255.248
    default-router 192.168.10.1

  • I can't send or receive text messages from non iphone users

    I can't send or receive text messages from non iphone users

    Under Settings - Messages, do it state Sens SMS ON? Should be (this applies to imessage but just in case).
    Same area, MMS Messaging is on? Should be.
    If all else fails, go into Settings General Reset - Reset Network Settings (this will lose WiFi info but fixes a lot of messaging errors).

  • I have 3 email addresses with my ISP.  How do I set up my iPhone to receive emails addressed from any one of these addresses

    I have 3 email addresses with my ISP.  How do I set up my iPhone to receive emails addressed from any one of these addresses

    Even though they share the same incoming and outgoing server settings, each is a distinct account, so you just need to set up 3 accounts on your iPhone, one for each email address.
    Or, since these are all from the same ISP, do they have online account management tools to let you forward two of those to the one account you want to be the "master" account?  You still may want separate accounts on your iPhone though, as an account can only have one address associated with it for the "reply" field when responding to emails.

  • Client not receive ip address - dhcp_reqd

    Hi,
    In my environment there's a  5508 (firmware 7.4.110.0) and ap 1600 with a ias radius server. All wlan are in flex-connect local switching, one client try to connect on a wlan but not receive ip address. After enabled debug aaa all i took the log corresponding :
    Cisco Controller) >*emWeb: Feb 11 16:52:36.047: Created WARP Capabilities IE (length 12) for WLAN LAB
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Adding mobile on LWAPP AP 00:3a:9a:77:55:a0(0)
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Association received from mobile on BSSID 00:3a:9a:77:55:06
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Rf profile 200 Clients are allowed to AP radio
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Max Client Trap Threshold: 50  cur: 3
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Rf profile 200 Clients are allowed to AP wlan
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Applying Interface policy on Mobile, role Unassociated. Ms NAC State 0 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 Re-applying interface policy for client
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2018)
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2246)
    *apfMsConnTask_2: Feb 11 16:54:22.495: 18:3d:a2:25:01:a4 In processSsidIE:4264 setting Central switched to FALSE
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Applying site-specific Local Bridging override for station 18:3d:a2:25:01:a4 - vapId 103, site 'Test', interface 'management'
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Applying Local Bridging Interface Policy for station 18:3d:a2:25:01:a4 - vlan 0, interface id 0, interface 'management'
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Applying site-specific override for station 18:3d:a2:25:01:a4 - vapId 103, site 'Test', interface 'management'
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Applying Interface policy on Mobile, role Unassociated. Ms NAC State 2 Quarantine Vlan 0 Access Vlan 0
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Re-applying interface policy for client
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2018)
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2246)
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 STA - rates (8): 130 132 139 150 12 18 24 36 0 0 0 0 0 0 0 0
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 STA - rates (12): 130 132 139 150 12 18 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Processing WPA IE type 221, length 24 for mobile 18:3d:a2:25:01:a4
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 Setting active key cache index 8 ---> 8
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 unsetting PmkIdValidatedByAp
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Initializing policy
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state START (0)
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
    *apfMsConnTask_2: Feb 11 16:54:22.496: 18:3d:a2:25:01:a4 0.0.0.0 8021X_REQD (3) DHCP required on AP 00:3a:9a:77:55:a0 vapId 103 apVapId 1for this client
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:3a:9a:77:55:a0 vapId 103 apVapId 1 flex-acl-name:
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 apfMsAssoStateInc
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 apfPemAddUser2 (apf_policy.c:276) Changing state for mobile 18:3d:a2:25:01:a4 on AP 00:3a:9a:77:55:a0 from Idle to Associated
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 apfPemAddUser2:session timeout forstation 18:3d:a2:25:01:a4 - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is  0
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 Sending Assoc Response to station on BSSID 00:3a:9a:77:55:a0 (status 0) ApVapId 1 Slot 0
    *apfMsConnTask_2: Feb 11 16:54:22.497: 18:3d:a2:25:01:a4 apfProcessAssocReq (apf_80211.c:7399) Changing state for mobile 18:3d:a2:25:01:a4 on AP 00:3a:9a:77:55:a0 from Associated to Associated
    *apfMsConnTask_2: Feb 11 16:54:22.506: 18:3d:a2:25:01:a4 Updating AID for REAP AP Client 00:3a:9a:77:55:a0 - AID ===> 4
    *dot1xMsgTask: Feb 11 16:54:22.512: 18:3d:a2:25:01:a4 Station 18:3d:a2:25:01:a4 setting dot1x reauth timeout = 1800
    *dot1xMsgTask: Feb 11 16:54:22.512: 18:3d:a2:25:01:a4 dot1x - moving mobile 18:3d:a2:25:01:a4 into Connecting state
    *dot1xMsgTask: Feb 11 16:54:22.512: 18:3d:a2:25:01:a4 Sending EAP-Request/Identity to mobile 18:3d:a2:25:01:a4 (EAP Id 1)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.513: 18:3d:a2:25:01:a4 Received EAPOL START from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.513: 18:3d:a2:25:01:a4 dot1x - moving mobile 18:3d:a2:25:01:a4 into Connecting state
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.513: 18:3d:a2:25:01:a4 Sending EAP-Request/Identity to mobile 18:3d:a2:25:01:a4 (EAP Id 2)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.541: 18:3d:a2:25:01:a4 Received EAPOL EAPPKT from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.541: 18:3d:a2:25:01:a4 Received EAP Response packet with mismatching id (currentid=2, eapid=1) from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.554: 18:3d:a2:25:01:a4 Received EAPOL EAPPKT from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.554: 18:3d:a2:25:01:a4 Received Identity Response (count=2) from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.554: 18:3d:a2:25:01:a4 EAP State update from Connecting to Authenticating for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.554: 18:3d:a2:25:01:a4 dot1x - moving mobile 18:3d:a2:25:01:a4 into Authenticating state
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.554: 18:3d:a2:25:01:a4 Entering Backend Auth Response state for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.572: 18:3d:a2:25:01:a4 Processing Access-Challenge for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.572: 18:3d:a2:25:01:a4 Entering Backend Auth Req state (id=3) for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.572: 18:3d:a2:25:01:a4 Sending EAP Request from AAA to mobile 18:3d:a2:25:01:a4 (EAP Id 3)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.585: 18:3d:a2:25:01:a4 Received EAPOL EAPPKT from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.585: 18:3d:a2:25:01:a4 Received EAP Response from mobile 18:3d:a2:25:01:a4 (EAP Id 3, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.585: 18:3d:a2:25:01:a4 Entering Backend Auth Response state for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.598: 18:3d:a2:25:01:a4 Processing Access-Challenge for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.598: 18:3d:a2:25:01:a4 Entering Backend Auth Req state (id=4) for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.598: 18:3d:a2:25:01:a4 Sending EAP Request from AAA to mobile 18:3d:a2:25:01:a4 (EAP Id 4)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.613: 18:3d:a2:25:01:a4 Received EAPOL EAPPKT from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.613: 18:3d:a2:25:01:a4 Received EAP Response from mobile 18:3d:a2:25:01:a4 (EAP Id 4, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.613: 18:3d:a2:25:01:a4 Entering Backend Auth Response state for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.627: 18:3d:a2:25:01:a4 Processing Access-Challenge for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.627: 18:3d:a2:25:01:a4 Entering Backend Auth Req state (id=7) for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.627: 18:3d:a2:25:01:a4 WARNING: updated EAP-Identifier 4 ===> 7 for STA 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.627: 18:3d:a2:25:01:a4 Sending EAP Request from AAA to mobile 18:3d:a2:25:01:a4 (EAP Id 7)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.643: 18:3d:a2:25:01:a4 Received EAPOL EAPPKT from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.643: 18:3d:a2:25:01:a4 Received EAP Response from mobile 18:3d:a2:25:01:a4 (EAP Id 7, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.643: 18:3d:a2:25:01:a4 Entering Backend Auth Response state for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Processing Access-Accept for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Resetting web IPv4 acl from 255 to 255
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Resetting web IPv4 Flex acl from 65535 to 65535
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Setting re-auth timeout to 1800 seconds, got from WLAN config.
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Station 18:3d:a2:25:01:a4 setting dot1x reauth timeout = 1800
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Username entry (pippo) created for mobile, length = 253
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Username entry (pippo) created in mscb for mobile, length = 253
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Creating a PKC PMKID Cache entry for station 18:3d:a2:25:01:a4 (RSN 0)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Setting active key cache index 8 ---> 8
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Setting active key cache index 8 ---> 0
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.656: 18:3d:a2:25:01:a4 Sending EAP-Success to mobile 18:3d:a2:25:01:a4 (EAP Id 7)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 Freeing AAACB from Dot1xCB as AAA auth is done for  mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 Starting key exchange to mobile 18:3d:a2:25:01:a4, data packets will be dropped
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 Sending EAPOL-Key Message to mobile 18:3d:a2:25:01:a4
                                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 Entering Backend Auth Success state (id=7) for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 Received Auth Success while in Authenticating state for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.657: 18:3d:a2:25:01:a4 dot1x - moving mobile 18:3d:a2:25:01:a4 into Authenticated state
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.671: 18:3d:a2:25:01:a4 Received EAPOL-Key from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.671: 18:3d:a2:25:01:a4 Received EAPOL-key in PTK_START state (message 2) from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.671: 18:3d:a2:25:01:a4 Stopping retransmission timer for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.671: 18:3d:a2:25:01:a4 Sending EAPOL-Key Message to mobile 18:3d:a2:25:01:a4
                                                                                                                        state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 Received EAPOL-Key from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 Stopping retransmission timer for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 apfMs1xStateInc
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 0.0.0.0 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 0.0.0.0 L2AUTHCOMPLETE (4) DHCP required on AP 00:3a:9a:77:55:a0 vapId 103 apVapId 1for this client
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.689: 18:3d:a2:25:01:a4 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 00:3a:9a:77:55:a0 vapId 103 apVapId 1 flex-acl-name:
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state L2AUTHCOMPLETE (4)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 5952, Adding TMP rule
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
      type = Airespace AP - Learn IP address
      on AP 00:3a:9a:77:55:a0, slot 0, interface = 13, QOS = 0
      IPv4 ACL ID = 255, IP
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206  Local Bridging Vlan = 0, Local Bridging intf id = 0
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255)
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 Key exchange done, data packets from mobile 18:3d:a2:25:01:a4 should be forwarded shortly
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 Sending EAPOL-Key Message to mobile 18:3d:a2:25:01:a4
                                                                                                                        state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
    *pemReceiveTask: Feb 11 16:54:22.690: 18:3d:a2:25:01:a4 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
    *spamApTask3: Feb 11 16:54:22.707: 18:3d:a2:25:01:a4 Sent EAPOL-Key M5 for mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.768: 18:3d:a2:25:01:a4 Received EAPOL-Key from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.768: 18:3d:a2:25:01:a4 Received EAPOL-key in REKEYNEGOTIATING state (message 6) from mobile 18:3d:a2:25:01:a4
    *Dot1x_NW_MsgTask_4: Feb 11 16:54:22.769: 18:3d:a2:25:01:a4 Stopping retransmission timer for mobile 18:3d:a2:25:01:a4
    *apfReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
    *apfReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 5576, Adding TMP rule
    *apfReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Replacing Fast Path rule
      type = Airespace AP - Learn IP address
      on AP 00:3a:9a:77:55:a0, slot 0, interface = 13, QOS = 0
      IPv4 ACL ID = 255,
    *apfReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206  Local Bridging Vlan = 0, Local Bridging intf id = 0
    *apfReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255)
    *pemReceiveTask: Feb 11 16:54:25.619: 18:3d:a2:25:01:a4 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
    (Cisco Controller) >*emWeb: Feb 11 16:54:46.127: 18:3d:a2:25:01:a4 Central Switch = FALSE
    *emWeb: Feb 11 16:54:46.128: 18:3d:a2:25:01:a4 Central Switch = FALSE
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >
    (Cisco Controller) >*emWeb: Feb 11 16:55:36.461: 18:3d:a2:25:01:a4 Central Switch = FALSE
    *emWeb: Feb 11 16:55:36.463: 18:3d:a2:25:01:a4 Central Switch = FALSE
    From log i know that 802.1x passed, while dhcp don't send ip address. It seems that the local vlan id is 0 while in reality is 3... WHY ? i don't understand.
    Someone can help me to find the problem? i think the problem is on the network, the dhcp ( the corporate router) is directly connected to the ap.

    Are you setting your FlexConnect native vlan and the wlan to vlan mapping?  You also need to make sure you have the ip helpers setup and that dhcp is working.  I would configure a switch port to a vlan that the wireless users is suppose to be on locally at that site and connect a laptop to that port and make sure that the laptop gets an address.
    Thanks,
    Scott
    *****Help out other by using the rating system and marking answered questions as "Answered"*****

  • IPad suddenly doesn't receive IP-address from DHCP-server

    I have a wireless network running 802.11x consisting of an SMC-router/AP. The network has an additional access point - actually a homeplug device (Netgear) which however is connected to the router directly by wire (ethernet cable).
    The problem is that my iPad 2 sometimes drops the assigned IP-address and won't receive a new one from the router.
    This is how it looks seen from the router's admin interface:
    When software-resetting the router, it delegates new IP-addresses to the various DHCP clients and also to the ipad. However, the ipad never receives these settings.
    Strangely, when I renew the lease on my iPhone 4, that device does receive new settings from the router.
    And even more strange: When I share the iPhone's network, the iPad will connect through that connection right away.
    So far, the only way to solve this has been to remove power from the router and reboot it while keeping the iPad in the vicinity of the router's own AP instead of the other AP.
    The problem isn't persistent but it reappears from time to time with no apparent reason.
    Any suggestions on what could be wrong here?

    Crlarsen-
    One thing you did not mention, was resetting the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect the iPad to WiFi.
    Fred

  • WLC2412-Clients Not receiving DHCP addresses

    I recently upgraded a clients WLC and they keep saying they are unable to get an IP address from the DHCP server.  It's a simple, flat network and here is what the logs are showing.  Any advice would be greatly appreciated.
    *apfReceiveTask: Apr 11 13:37:25.477: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.
    *apfReceiveTask: Apr 11 13:37:17.278: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.
    *apfReceiveTask: Apr 11 13:37:05.880: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.
    *apfReceiveTask: Apr 11 13:13:47.397: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.
    *apfReceiveTask: Apr 11 13:37:25.477: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.
    *apfReceiveTask: Apr 11 13:37:17.278: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.
    *apfReceiveTask: Apr 11 13:37:05.880: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.
    *apfReceiveTask: Apr 11 13:13:47.397: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.

    (Cisco Controller) show>interface detailed management
    Interface Name................................... management
    MAC Address...................................... 64:00:f1:91:5d:40
    IP Address....................................... 192.168.8.3
    IP Netmask....................................... 255.255.255.0
    IP Gateway....................................... 192.168.8.1
    External NAT IP State............................ Disabled
    External NAT IP Address.......................... 0.0.0.0
    VLAN............................................. 8
    Quarantine-vlan.................................. 0
    Physical Port.................................... 1
    Primary DHCP Server.............................. 192.168.8.49
    Secondary DHCP Server............................ Unconfigured
    DHCP Option 82................................... Disabled
    ACL.............................................. Unconfigured
    AP Manager....................................... No
    Guest Interface.................................. No
    L2 Multicast..................................... Enabled

  • Windows (XP) not receiving IP address from LAN port on Airport Extreme

    I have a DSL modem connected to the AEBS WAN port. Three computers (one Windows laptop, one emac, and one powerbook) can successfully connect to the internet wirelessly through the AEBS. The remaining desktop PC, running Windows XP, normally connects to the LAN port on the AEBS and there are no problems.
    Suddenly, the desktop (always configured to get ip addresses automatically using DHCP) is not getting an IP address from the AEBS. I've confirmed this via IPconfig, and the address is 169..... The Windows error message is "limited or no connectivity."
    When the desktop is connected directly to the DSL modem, however, it works just fine. Of course this isn't a satisfactory fix, as it means the DSL modem is no longer connected to the AEBS WAN port, and none of the wireless computers have internet access.
    I've determined that the problem is not in the LAN port itself, as my powerbook successfully connects via ethernet through the AEBS LAN port.
    I've also updated the AEBS firmware to 5.7.
    Any suggestions on how to fix this. As I mentioned, the problem occurred overnight.

    Try using System Restore to set the computer back to a time when it was working.
    iFelix

  • Unable to make a transparent connection from non root user

    Hi
    I am trying to make a transparent connection from a non-root user and I am having permission denied when trying to generate ssh keys, as per below:
    $ ssh-keygen -t rsa
    Generating public/private rsa key pair.
    Enter file in which to save the key (/global/xnode/taprap/.ssh/id_rsa):
    Enter passphrase (empty for no passphrase):
    Enter same passphrase again:
    open /global/xnode/taprap/.ssh/id_rsa failed: Permission denied.
    Saving the key failed: /global/xnode/taprap/.ssh/id_rsa.
    Its working fine as root user, but not for any other user.
    Please can you help
    FR

    Hi
    for /global/xnode/taprap I have:
    drwxrwxrwx 35 taprap other 59904 Sep 30 10:35 taprap
    and for the .ssh
    ls -al .ssh
    total 122
    drwx------ 2 105 other 512 Jan 27 2009 .
    drwxrwxrwx 35 taprap other 59904 Sep 30 10:45 ..
    -rw-r--r-- 1 105 other 440 May 3 2010 known_hosts
    ls -al /.ssh/id_rsa
    -rw------- 1 root root 883 Mar 15 2011 /.ssh/id_rsa

  • AP Express won't receive IP address from internet provider

    After about a month of perfect performance, my AP Express Base Station (v6.3) has suddenly become unable to receive the IP address automatically from my internet provider. I did a full factory-default reset on it with no success. I've been through the settings in the airport utility, and it is set to receive the IP address automatically from my provider through DHCP, so it SHOULD be okay... but it's not.
    I plugged my old Linksys router in and it works fine, so it's not a problem with my provider. Also, on the line with tech support (with my internet provider) and we even tried to input the addresses manually, and it still wouldn't connect.
    Any thoughts? My thoughts are that something is wrong with the Airport Express that needs to be repaired. It's odd that it suddenly stopped working and is resisting all methods of reworking / bipassing the settings.
    ~Rob

    I am having the exact same issue. My AX is about 2 years old, and it has performed flawlessly for that time. And by that I mean it has run virtually without needing a restart, except for an occasional power cycle every few weeks on the cable modem.
    Just about two weeks ago, the AX started having difficulty obtaining the IP address from my provider. On Ethernet, it can do it. AX cannot. I had my ISP reset the connection, test my connection, and they had me power cycle, check all my settings, etc. It seems there's no issue with the signal coming from the modem. It's Airport Express that can't get the IP and hangs forever with the orange blinking light. I can use Airtunes, however.
    What should I do at this point? Do I need to take it in to Apple to get it looked at? Or am I screwed? I am pretty sure I am out of my 1-year warranty. Please advise!

  • Can't receive SMS texts from non-iPhone users

    My phone suddenly stopped letting me receive texts from non iPhone users yesterday. Since then, I have powered my phone on and off, reset the network, and power cycle. My mother has been in the hospital and I have to be here with her all day. I have no time to go to a verizon store. I've only had the phone a week and I'm really disappointed with this. Seeing my mom is in the hospital, I really need this to be working, but I'd don't even know of something else to try.

        Ktoole, I can understand how frustrating this could be. How long has this been an issue? Have you ever been able to receive texts from non-iPhone users? Do you have iMessage on or off? Have you tried to restore the phone through iTunes?
    SammuelP
    VZW Support

  • IPhone 4 not sending/receiving texts to/from non-iPhone

    Hello,
    I am on a shared plan with my mother. Thursday afternoon my mom updated our plan and suddenly my phone was not sending or receiving text messages to non-iPhones. iMessage is working just fine, thus I can only talk to people with iPhones. It fairly closely correlated to the IOS update so I updated my phone and that didn't help.
    I have tried resetting network setting, hard reset, toying with message settings, *228 options 1 AND 2 etc... and still nothing is working. Please help! I run a business and can not afford to not be able to be in contact with half my contacts!

        Hi s13021,
    Let's get your messages flowing again! Thanks for the doing the troubleshooting you have done so far.  I know that running a business with a fully functional phone is needed. I have a couple things for you to try. First, turn off iMessage, power cycle your phone and keep iMessage off; try sending messages. To run a good test, send the message to your self and please put "1" in front of your number. Also, another step to try is turn off iMessage, then reset network settings, then turn it on and try again. These have been some successful steps. Please keep us posted.
    Thanks, BobbyS_VZW
    Follow us on Twitter @VZWSupport

  • Can't send nor receive photos to/from non-iPhone users

    I have Metro PCS and I have unlimited data and ever since I updated to iOS 8, I haven't been able to send picture messages to non-iPhone users. I have tried everything I've found online and nothing works. It was working PERFECTLY before we updated to iOS8! I could send picture messages to anyone without any problem. The rest of my family, who share the same family plan with me, can send pictures just fine (they're all android users). However, my sister and I, who are iPhone 5s users, can't send nor receive picture messages. Every time we try to send a pic to an android user, it immediately says not delivered. It doesn't even try to send it. And it's not a problem with my data because I can watch youtube videos with my 4g just fine. I even turn off the Wi-Fi to test it out and it works well. Does anyone know how I can fix this?

    electronicsguy123 wrote:
    i don't need to, everyone of my contacts has it. Plus every new contact/friend i've made in the last year or two has had it. maybe the apple fanbois here don't like to hear that.
    I'm happy that it works for you. It may not be an option for the OP. It certainly wouldn't work for me as I have a fair number of friends with basic phones. Again, Whatsapp is only viable as a replacement for SMS if everyone you want to message is willing to download and use it. If everyone the OP knows is not wiilling to do that, they may need to resolve their existing problem.

  • XFCE issues - HAL/shutdown; startxfce from non-root; keyboard maps

    Today I finally decided to get rid of Ubuntu on my desktop machine and installed Archlinux.
    I want to have XFCE running on it and in general its running quite nicely.
    [ignore this paragraph]
    Yet I can't use restart/shutdown my comp from within Archlinux using that power off button. I get an error stating that HAL is either not permitting to shutdown/reboot the computer, or that it's not available.
    [/stop ignoring it here]
    Also my keyboard map in XFCE is different than the one I use outside X (I have a UK keyboard layout; in the shell without a desktop environment everything is right). Why is that? Where can I change it?
    Also I Arch installed on my laptop. Initially I used OpenBox, but now I wanted to try XFCE on it too. But here I can't start xfce from my user account (from root or with sudo though it works). I get an error stating "Unable to access file /home/user/.ICEauthority: Permission denied".
    EDIT: Alright, the HAL issue is solved for whatever reason. Seems like a restart did it.
    Last edited by Stalafin (2007-11-26 18:45:11)

    The solution to the startxfce problem is to change the owner.
    sudo chown -R youruser /home/user/.ICEauthority
    The -R flag will performe the change recursively
    If you ever log in as root again, or using sudo, you will have to change the owner again.

Maybe you are looking for

  • I am furious and Verizon doesn't seem to care!!

    I am a long time Verizon customer.  I actually date back to 1997 when I was a part of Airtouch.  Regardless, I am having an issue where equipment charges have been added onto my account.  Back in early December 2014 my daughter and I upgraded our IPh

  • F-03 Account Clearing Not selecting docs

    Hi, I have open items in a B/S account which is open item managed and I am able to see all the documents and the balances are tallying. I want to clear all the documents thru tc.F.03, but in F-03 all the documents were not selected and there is amoun

  • Multiple choices in droplist?

    For as much as I know, a droplist cannot have multiple selected items when using normal javascript in Designer 7.1. Has this changed with Designer 8 / ES and if so, is there any special limitation in version of the Reader to use? 8.0 or 8.1? If no on

  • Install Oracle 10.1.2 On Fedora Core 6

    Hi I need help , I have tried to install Oracle 10.1.2 into Fedora Core 6 and I tried to check require package. It miss some packages follow openmotif     openmotif-2.2.2-16 compat-db     compat-db-4.0.14.5 compat-gcc     compat-gcc-7.3-2.96.122 comp

  • Regarding Delivery  address

    Hi to all, I got one issue which is peculiar to me. One central distribution channel (Considered as plant) which is in malasia supllies finished goods to customer directly to india.When that particular product is repaired it is shipped directly to ma