Clients not able to join more 256 nos

Hi
We have using wireless controller CISCO 2125 with 8 nos LWAP 1252, including AP's getting the IP from windows DHCPserver (172.29.70.0/23), when clients reaches 256 nos in controller , then further not able to join in wireless network.
DHCP vendor class or user class will solve this issue. pl guide me .
thanks
Karthik

Well, it's totally expected then as it's the maximum amount of clients supported by the 2125.
If you have that amount of client you should look into having more APs and a more powerful WLC. That limit is not just there for marketing purpose. It looks like your network is under-powered compared to its real usage.
Regards,
Nicolas
===
Don't forget to rate answers that you find useful

Similar Messages

VPN clients not able to ping Remote PCs & Servers : ASA 5520

VPN is connected successfully. But not able to ping any remote ip or fqdn from client pc. But able to ping ASA 5520 firewalls inside interface. Also some clients able to access, some clients not able to access. I new to these firewalls. I tried most of ways from internet, please any one can help asap.
Remote ip section : 192.168.1.0/24
VPN IP Pool : 192.168.5.0/24
Running Config :
ip address 192.168.1.2 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
passwd z40TgSyhcLKQc3n1 encrypted
boot system disk0:/asa722-k8.bin
ftp mode passive
clock timezone GST 4
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 213.42.20.20
domain-name default.domain.invalid
access-list outtoin extended permit tcp any host 83.111.113.114 eq 3389
access-list outtoin extended permit tcp any host 83.111.113.113 eq https
access-list outtoin extended permit tcp any host 83.111.113.114 eq smtp
access-list outtoin extended permit tcp any host 83.111.113.114 eq https
access-list outtoin extended permit tcp any host 83.111.113.114 eq www
access-list outtoin extended permit tcp any host 83.111.113.115 eq https
access-list outtoin extended permit tcp any host 94.56.148.98 eq 3389
access-list outtoin extended permit tcp any host 83.111.113.117 eq ssh
access-list fualavpn_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list outside_nat0_outbound extended permit ip 192.168.5.0 255.255.255.0
92.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 1
2.168.5.0 255.255.255.0
access-list inet_in extended permit icmp any any time-exceeded
access-list inet_in extended permit icmp any any unreachable
access-list inet_in extended permit icmp any any echo-reply
access-list inet_in extended permit icmp any any echo
pager lines 24
logging enable
logging asdm informational
logging from-address [email protected]
logging recipient-address [email protected] level errors
logging recipient-address [email protected] level emergencies
logging recipient-address [email protected] level errors
mtu outside 1500
mtu inside 1500
ip local pool fualapool 192.168.5.10-192.168.5.50 mask 255.255.255.0
ip local pool VPNPool 192.168.5.51-192.168.5.150 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound outside
nat (inside) 1 192.168.1.0 255.255.255.0
static (inside,outside) 94.56.148.98 192.168.1.11 netmask 255.255.255.255
static (inside,outside) 83.111.113.114 192.168.1.111 netmask 255.255.255.255
access-group inet_in in interface outside
route outside 0.0.0.0 0.0.0.0 83.111.113.116 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 10
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
deny-message value Login was successful, but because certain criteria have no
been met or due to some specific group policy, you do not have permission to u
e any of the VPN features. Contact your IT administrator for more information
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy fualavpn internal
group-policy fualavpn attributes
dns-server value 192.168.1.111 192.168.1.100
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value fualavpn_splitTunnelAcl
username test password I7ZgrgChfw4FV2AW encrypted privilege 0
username Mohamed password Vqmmt8cR/.Qu7LhU encrypted privilege 0
username Moghazi password GMr7xgdqmGEQ2SVR encrypted privilege 0
username Moghazi attributes
password-storage enable
username fualauaq password E6CgvoOpTKphiM2U encrypted privilege 0
username fualauaq attributes
password-storage enable
username fuala password IFtijSYb7LAOV/IW encrypted privilege 15
username Basher password Djf15nXIJXmayfjY encrypted privilege 0
username Basher attributes
password-storage enable
username fualafac password VGC/7cKXW1A6eyXS encrypted privilege 0
username fualafac attributes
password-storage enable
username fualaab password ONTH8opuP4RKgRXD encrypted privilege 0
username fualaab attributes
password-storage enable
username fualaadh2 password mNEgLxzPBeF4SyDb encrypted privilege 0
username fualaadh2 attributes
password-storage enable
username fualaain2 password LSKk6slwsVn4pxqr encrypted privilege 0
username fualaain2 attributes
password-storage enable
username fualafj2 password lE4Wu7.5s7VXwCqv encrypted privilege 0
username fualafj2 attributes
password-storage enable
username fualakf2 password 38oMUuwKyShs4Iid encrypted privilege 0
username fualakf2 attributes
password-storage enable
username fualaklb password .3AMGUZ1NWU1zzIp encrypted privilege 0
username fualaklb attributes
password-storage enable
username fualastr password RDXSdBgMaJxNLnaH encrypted privilege 0
username fualastr attributes
password-storage enable
username fualauaq2 password HnjodvZocYhDKrED encrypted privilege 0
username fualauaq2 attributes
password-storage enable
username fualastore password wWDVHfUu9pdM9jGj encrypted privilege 0
username fualastore attributes
password-storage enable
username fualadhd password GK8k1MkMlIDluqF4 encrypted privilege 0
username fualadhd attributes
password-storage enable
username fualaabi password eYL0j16kscNhhci4 encrypted privilege 0
username fualaabi attributes
password-storage enable
username fualaadh password GTs/9BVCAU0TRUQE encrypted privilege 0
username fualaadh attributes
password-storage enable
username fualajuh password b9QGJ1GHhR88reM1 encrypted privilege 0
username fualajuh attributes
password-storage enable
username fualadah password JwVlqQNIellNgxnZ encrypted privilege 0
username fualadah attributes
password-storage enable
username fualarak password UE41e9hpvcMeChqx encrypted privilege 0
username fualarak attributes
password-storage enable
username fualasnk password ZwZ7fVglexrCWFUH encrypted privilege 0
username fualasnk attributes
password-storage enable
username rais password HrvvrIw5tEuam/M8 encrypted privilege 0
username rais attributes
password-storage enable
username fualafuj password yY2jRMPqmNGS.3zb encrypted privilege 0
username fualafuj attributes
password-storage enable
username fualamaz password U1YUfQzFYrsatEzC encrypted privilege 0
username fualamaz attributes
password-storage enable
username fualashj password gN4AXk/oGBTEkelQ encrypted privilege 0
username fualashj attributes
password-storage enable
username fualabdz password tg.pB7RXJx2CWKWi encrypted privilege 0
username fualabdz attributes
password-storage enable
username fualamam password uwLjc0cV7LENI17Y encrypted privilege 0
username fualamam attributes
password-storage enable
username fualaajm password u3yLk0Pz0U1n.Q0c encrypted privilege 0
username fualaajm attributes
password-storage enable
username fualagrm password mUt3A60gLJ8N5HVr encrypted privilege 0
username fualagrm attributes
password-storage enable
username fualakfn password ceTa6jmvnzOFNSgF encrypted privilege 0
username fualakfn attributes
password-storage enable
username Fualaain password Yyhr.dlc6/J7WvF0 encrypted privilege 0
username Fualaain attributes
password-storage enable
username fualaban password RCJKLGTrh7VM2EBW encrypted privilege 0
username John password D9xGV1o/ONPM9YNW encrypted privilege 15
username John attributes
password-storage disable
username wrkshopuaq password cFKpS5e6Whp0A7TZ encrypted privilege 0
username wrkshopuaq attributes
password-storage enable
username Talha password 3VoAABwXxVonLmWi encrypted privilege 0
username Houssam password Cj/uHUqsj36xUv/R encrypted privilege 0
username Faraj password w2qYfE3DkYvS/oPq encrypted privilege 0
username Faraj attributes
password-storage enable
username gowth password HQhALLeiQXuIzptCnTv1rA== nt-encrypted privilege 15
username Hameed password 0Kr0N1VRmLuWdoDE encrypted privilege 0
username Hameed attributes
password-storage enable
username Hassan password Uy4ASuiNyEd70LCw encrypted privilege 0
username cisco password IPVBkPI1GLlHurPD encrypted privilege 15
username Karim password 5iOtm58EKMyvruZA encrypted privilege 0
username Shakir password BESX2bAvlbqbDha/ encrypted privilege 0
username Riad password iB.miiOF7qMESlCL encrypted privilege 0
username Azeem password 0zAqiCG8dmLyRQ8f encrypted privilege 15
username Azeem attributes
password-storage disable
username Osama password xu66er.7duIVaP79 encrypted privilege 0
username Osama attributes
password-storage enable
username Mahmoud password bonjr0B19aOQSpud encrypted privilege 0
username alpha password x8WO0aiHL3pVFy2E encrypted privilege 15
username Wissam password SctmeK/qKVNLh/Vv encrypted privilege 0
username Wissam attributes
password-storage enable
username Nabil password m4fMvkTgVwK/O3Ms encrypted privilege 0
aaa authentication telnet console LOCAL
aaa authentication ssh console LOCAL
aaa authentication enable console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 outside
http 192.168.1.4 255.255.255.255 inside
http 192.168.1.100 255.255.255.255 inside
http 192.168.1.111 255.255.255.255 inside
http 192.168.1.200 255.255.255.255 inside
http 83.111.113.117 255.255.255.255 outside
http 192.168.1.17 255.255.255.255 inside
http 192.168.1.16 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
tunnel-group fualavpn type ipsec-ra
tunnel-group fualavpn type ipsec-ra
tunnel-group fualavpn general-attributes
address-pool fualapool
address-pool VPNPool
default-group-policy fualavpn
tunnel-group fualavpn ipsec-attributes
pre-shared-key *
tunnel-group fualavpn ppp-attributes
authentication pap
authentication ms-chap-v2
authentication eap-proxy
telnet 0.0.0.0 0.0.0.0 outside
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
Cryptochecksum:38e41e83465d37f69542355df734db35
: end

Hi,
What about translating the traffic on the local ASA (Active unit) for traffic received from the VPN tunnel to the internal interface IP address? You can try something like nat (outside,inside) source dynamic obj-VpnRemoteTraffic interface destination static StandbyIP StandbyIP
Regards,

External user not able to join Live Meeting, but can join Lync Meeting

We have LYNC 2010 pool with OCS 2007 R2 & Live Meeting clients ( with few LYNC 2010 clients). We are having issue with one external organization with Live Meetings. If any of our company user schedules Live Meeting, the particular external company users
( they have OCS 2007 R2 and Live Meeting clients) are not able to join our Live meetings. If we schedule Lync Meetings, they are able to join successfully through Web Interface.
On the other side, our users don't have any issue to join their Live Meetings.
We have LYNC edge servers and all external users don't have any issue to join our Live Meetings. The external company also don't have any issue with other users.
It's only 1 to 1 issue with Live Meeting ( not Lync meeting).
Any help to resolve this issue is much appreciated...
Tek-Nerd

Hi,
From your description, did you mean it is a coexistence environment?
Did they receive any error message from Live Meeting client?
If possible, you can test with other federation companies with Live Meeting client. If it happen to all federation companies, I suggest to double check port, certificate requirement for federation. If it happen only for one company, please check
if Live Meeting Clients update to the latest version.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

3602 AP not able to join 3850 WLC

Hello,
I have a 3850 switch with inetegrated WLC and my 3602 is not able to join the controller. Error from AP:
*Oct 24 19:21:17.355: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 41, state 8
*Oct 24 19:21:17.355: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Oct 24 19:21:17.355: %CAPWAP-3-ERRORLOG: Failed to process Message timer message.
*Oct 24 19:21:20.355: %CAPWAP-3-ERRORLOG: DTLS connection not found Failed to encrypt and send packet.
*Oct 24 19:21:20.355: %CAPWAP-3-ERRORLOG: Failed to encrypt and send packet.
*Oct 24 19:21:20.355: %CAPWAP-3-ERRORLOG: Failed to send packet from queue
*Oct 24 19:21:20.355: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 41, state 8
*Oct 24 19:21:20.355: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Oct 24 19:21:20.355: %CAPWAP-3-ERRORLOG: Failed to process Message timer message.
., 1)24 19:21:23.355: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(UNKNOWN_MESSAGE_TYPE (5)
*Oct 24 19:21:23.355: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Oct 24 19:21:28.903: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
Switch Config:
ip dhcp pool TMOWireless
network x.x.x.0 255.255.255.0
default-router x.x.x.1
dns-server 8.8.8.8 4.2.2.2
option 43 hex f104.0x4x.dx0x
option 60 ascii "Cisco AP c3602"
wireless mobility controller
wireless management interface Vlanxxxx
wlan xxxxx1 xxxxx
client vlan xxxx
no security wpa akm dot1x
security wpa akm psk set-key ascii 0 xxxxxxxxx
no shutdown
show wlan summary
Mobility Controller Summary:
Mobility Role                                   : Mobility Controller
Mobility Protocol Port                          : 16666
Mobility Group Name                             : default
Mobility Oracle IP Address                      : 0.0.0.0
DTLS Mode                                       : Enabled
Mobility Domain ID for 802.11r                  : 0xac34
Mobility Keepalive Interval                     : 10
Mobility Keepalive Count                        : 3
Mobility Control Message DSCP Value             : 0
Mobility Domain Member Count                    : 1
Link Status is Control Link Status : Data Link Status
Controllers configured in the Mobility Domain:
IP               Public IP        Group Name       Multicast IP     Link Status
x.x.x.x      -                default          0.0.0.0          UP   : UP
show ap summary:
clk5-Das-cor01#show ap summary
Number of APs: 1
Global AP User Name: Not configured
Global AP Dot1x User Name: Not configured
AP Name                           AP Model Ethernet MAC    Radio MAC       State
AP4c00.82df.ac68                  3602I     4c00.82df.ac68 f84f.57e3.8ec0 Registered
show capwap summary
CAPWAP Tunnels General Statistics:
Number of Capwap Data Tunnels       = 0
Number of Capwap Mobility Tunnels   = 0
Number of Capwap Multicast Tunnels = 0
Name   APName                           Type PhyPortIf Mode      McastIf
Name   SrcIP           SrcPort DestIP          DstPort DtlsEn MTU
Any help is appreciated, thank you.

Full error log:
*Oct 24 19:59:32.351: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Oct 24 19:59:37.891: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Oct 24 19:59:37.959: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Oct 24 19:59:37.959: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Oct 24 19:59:38.175: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Oct 24 19:59:38.191: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Oct 24 19:59:38.959: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Oct 24 19:59:38.991: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Oct 24 19:59:38.999: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Oct 24 19:59:39.983: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Oct 24 19:59:39.991: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Oct 24 19:59:40.019: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Oct 24 19:59:40.027: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Oct 24 19:59:40.035: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Oct 24 19:59:41.019: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Oct 24 19:59:41.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Oct 24 19:59:41.055: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Oct 24 19:59:42.055: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
Not in Bound state.
*Oct 24 20:00:33.687: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Oct 24 20:00:38.691: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Oct 24 20:00:38.815: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.66.222.69, mask 255.255.255.0, hostname AP4c00.82df.ac68
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (8.8.8.8)
*Oct 24 20:00:44.687: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.66.222.1 obtained through DHCP
*Oct 24 20:00:44.687: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Oct 24 20:00:44.935: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Oct 24 20:01:14.935: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Oct 24 20:01:15.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.66.222.1 peer_port: 5246
*Oct 24 20:01:15.239: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.66.222.1 peer_port: 5246
*Oct 24 20:01:15.239: %CAPWAP-5-SENDJOIN: sending Join Request to 10.66.222.1
*Oct 24 20:01:15.371: %DTLS-5-ALERT: Received WARNING : Close notify alert from 10.66.222.1
*Oct 24 20:01:18.363: %CAPWAP-3-ERRORLOG: DTLS connection not found Failed to encrypt and send packet.
*Oct 24 20:01:18.363: %CAPWAP-3-ERRORLOG: Failed to encrypt and send packet.
*Oct 24 20:01:18.363: %CAPWAP-3-ERRORLOG: Failed to send packet from queue
*Oct 24 20:01:18.363: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 41, state 8
*Oct 24 20:01:18.363: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Oct 24 20:01:18.363: %CAPWAP-3-ERRORLOG: Failed to process Message timer message.
*Oct 24 20:01:21.363: %CAPWAP-3-ERRORLOG: DTLS connection not found Failed to encrypt and send packet.
*Oct 24 20:01:21.363: %CAPWAP-3-ERRORLOG: Failed to encrypt and send packet.
*Oct 24 20:01:21.363: %CAPWAP-3-ERRORLOG: Failed to send packet from queue
*Oct 24 20:01:21.363: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 41, state 8
*Oct 24 20:01:21.363: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Oct 24 20:01:21.363: %CAPWAP-3-ERRORLOG: Failed to process Message timer message.
*Oct 24 20:01:24.363: %CAPWAP-3-ERRORLOG: DTLS connection not found Failed to encrypt and send packet.
*Oct 24 20:01:24.363: %CAPWAP-3-ERRORLOG: Failed to encrypt and send packet.
*Oct 24 20:01:24.363: %CAPWAP-3-ERRORLOG: Failed to send packet from queue
*Oct 24 20:01:24.363: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 41, state 8
*Oct 24 20:01:24.363: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Oct 24 20:01:24.363: %CAPWAP-3-ERRORLOG: Failed to process Message timer message.
*Oct 24 20:01:27.363: %CAPWAP-3-ERRORLOG: DTLS connection not found Failed to encrypt and send packet.
*Oct 24 20:01:27.363: %CAPWAP-3-ERRORLOG: Failed to encrypt and send packet.
*Oct 24 20:01:27.363: %CAPWAP-3-ERRORLOG: Failed to send packet from queue
*Oct 24 20:01:27.363: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 41, state 8
*Oct 24 20:01:27.363: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Oct 24 20:01:27.363: %CAPWAP-3-ERRORLOG: Failed to process Message timer message.
*Oct 24 20:01:30.363: %CAPWAP-3-ERRORLOG: DTLS connection not found Failed to encrypt and send packet.
*Oct 24 20:01:30.363: %CAPWAP-3-ERRORLOG: Failed to encrypt and send packet.
*Oct 24 20:01:30.363: %CAPWAP-3-ERRORLOG: Failed to send packet from queue
*Oct 24 20:01:30.363: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer message. Event 41, state 8
*Oct 24 20:01:30.363: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Oct 24 20:01:30.363: %CAPWAP-3-ERRORLOG: Failed to process Message timer message.
*Oct 24 20:01:33.367: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(UNKNOWN_MESSAGE_TYPE (5)
., 1)

TS2755 Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using?

9.3.1- Not able to see more than 1 errors in application.log file

Hi,
In 9.3.1. version, I am not able to see more than 1 errors in application.log file during dataload without rules files.
If anybody has faced this solution, pls let me know the cause.
Thanks
jazz

Hey Jazz,
in the first row add a rule file with no load file change the path to what you want. then insert a new row add your load file here. it should have the path from the previous row in the error file. Then delete the first row and run. I had to do this for a level zero load and was the only thing I could figure out so far

Not able to select more than two values

Based on picklist.fmb, I created a list item in a form.
I am able select many values using SHIFT but I am not able to pick more than two values using CTRL key.
Anything I did mistake or picklist won't support picking more than two values using CTRL?
Also I am not able to get the scroll bar attaching to this list item.
Please advise.
Thank you,
Prasad

hi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

Not able to update more than 10,000 records in CT04 for a characteristic

Hi all,
We are not able to update more than 10,000 records in CT04 for a certain characteristic.
Is there any possible way to do this?
Please advise...its a production issue.
Thanks.

Hello ,
Please consider using a check table for the characteristic involved if you are working with large
number of values assigned
With a check table you have a possibility to work with a huge amount of values , also the performance should improve
Please refer to the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/ec/62ae27416a11d1896d0000e8322d00/frameset.htm
Section - Entering a Check Table
Hopefully the information helps
Thanks
Enda.

Not able to view more than two line in table control

Hi all,
I am not able to see more than two lines in table control. Although my table control height is 21...
Please see attached pic and suggest me what to do.

hi,
You have to set the LINES property of the table control In the PBO of your screen, to the number of entries in the internal table.
data: lv_line type i.
DESCRIBE TABLE gt_table LINES lv_line.
table_control-lines = lv_line + 1.
or else
You can do two thing in table control properties check horizontal and vertical scroll options plus in PBO you can based on number of lines in internal table assign it to TC_ABC-LINES if no lines are there then add by default 20..10.. any number of lines as you want.

I have iphone 4s , I'm not able to join any wifi, I have tried all the methods, resetting, trying different wifi and many others , but still not able to join any wifi , what shall I do?

I have iphone 4s , I'm not able to join any wifi, I have tried many things, resetting, trying different wifi and many others , but still not able to join any wifi , what shall I do?

Contact iTunes support. Nobody here can help with billing problems.

Managed server not able to join the cluster

Hi
I have two storage node enabled coherence servers on two different machines.These two are able to form the cluster without any problem. I also have two Managed servers. When I start one, will join the cluster without any issue but when I start the fourth one which does not join the cluster. Only one Managed server joins the cluster. I am getting the following error.
2011-12-22 15:39:26.940/356.798 Oracle Coherence GE 3.6.0.4 <Info> (thread=[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Loaded cache configuration from "file:/u02/oracle/admin/atddomain/atdcluster/ATD/config/atd-client-cache-config.xml"
2011-12-22 15:39:26.943/356.801 Oracle Coherence GE 3.6.0.4 <D4> (thread=[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): TCMP bound to /172.23.34.91:8190 using SystemSocketProvider
2011-12-22 15:39:57.909/387.767 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): This Member(Id=0, Timestamp=2011-12-22 15:39:26.944, Address=172.23.34.91:8190, MachineId=39242, Location=site:dev.icd,machine:appsoad2-web2,process:24613, Role=WeblogicServer) has been attempting to join the cluster at address 231.1.1.50:7777 with TTL 4 for 30 seconds without success; this could indicate a mis-configured TTL value, or it may simply be the result of a busy cluster or active failover.
2011-12-22 15:39:57.909/387.767 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): Received a discovery message that indicates the presence of an existing cluster:
Message "NewMemberAnnounceWait"
FromMember=Member(Id=2, Timestamp=2011-12-22 15:22:56.607, Address=172.23.34.74:8090, MachineId=39242, Location=site:dev.icd,machine:appsoad4,process:23937,member:CoherenceServer2, Role=WeblogicWeblogicCacheServer)
FromMessageId=0
Internal=false
MessagePartCount=1
PendingCount=0
MessageType=9
ToPollId=0
Poll=null
Packets
[000]=Broadcast{PacketType=0x0DDF00D2, ToId=0, FromId=2, Direction=Incoming, ReceivedMillis=15:39:57.909, MessageType=9, ServiceId=0, MessagePartCount=1, MessagePartIndex=0, Body=0}
Service=ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_ANNOUNCE), Id=0, Version=3.6}
ToMemberSet=null
NotifySent=false
ToMember=Member(Id=0, Timestamp=2011-12-22 15:39:26.944, Address=172.23.34.91:8190, MachineId=39242, Location=site:dev.icd,machine:appsoad2-web2,process:24613, Role=WeblogicServer)
SeniorMember=Member(Id=1, Timestamp=2011-12-22 15:22:53.032, Address=172.23.34.73:8090, MachineId=39241, Location=site:dev.icd,machine:appsoad3,process:19339,member:CoherenceServer1, Role=WeblogicWeblogicCacheServer)
2011-12-22 15:40:02.915/392.773 Oracle Coherence GE 3.6.0.4 <Warning> (thread=Cluster, member=n/a): Received a discovery message that indicates the presence of an existing cluster:
Message "NewMemberAnnounceWait"
FromMember=Member(Id=2, Timestamp=2011-12-22 15:22:56.607, Address=172.23.34.74:8090, MachineId=39242, Location=site:dev.icd,machine:appsoad4,process:23937,member:CoherenceServer2, Role=WeblogicWeblogicCacheServer)
FromMessageId=0
Internal=false
MessagePartCount=1
PendingCount=0
MessageType=9
ToPollId=0
Poll=null
Packets
{

Hi,
By default Coherence uses a multicast protocol to discover other nodes when forming a cluster. Since you are having difficulties in establishing a cluster via multicast, Can you please perform a multicast test and see if multicast is configured properly.
http://wiki.tangosol.com/display/COH32UG/Multicast+Test
Hope you are using same configuration files across the cluster members and all members of the cluster must specify the same cluster name in order to be allowed to join the cluster.
<cluster-name system-property="tangosol.coherence.cluster";>xxx</cluster-name>
I would suggest, try using the unicast-listener with the well-known-addresses instead of muticast-listener.
http://wiki.tangosol.com/display/COH32UG/well-known-addresses
Add similar entries like below in your tangosol override xml..
<well-known-addresses>
<socket-address id="1">
<address> 172.23.34.91<;/address>
<port>8190</port>
</socket-address>
<socket-address id="2">
<address> 172.23.34.74<;/address>
<port> 8090</port>
</socket-address>
</well-known-addresses>
This list is used by all other nodes to find their way into the cluster without the use of multicast, thus at least one well known node must be running for other nodes to be able to join.
Hope this helps!!
Thanks,
Ashok.
<div id="isChromeWebToolbarDiv" style="display:none"></div>

VF31 user not able to Print more billing document

Hi,
I am having an issue with the User, whenever the user is taking the print out of Billing document using the T.code - VF31 he was not able to take print out of more than 30 documents. But he is not getting any error. He wants to take print out of billing document like 100 nos,200 nos, etc., Can you suggest me what settings can be made so that user can take more print out instead 30 at a time..
VERY URGENT...
Help needed..
Thanks in advance
Kannan

Dear,
while giving printing to the printer we get the options that how many copies we require. Tell the user to enter the number of copies he required for printing.
After that also user gets error, tell him to check the printer he is using with local it team.
If you have any concerns revert back the same to me
Amjath

Not able to scale more than 1500 users when using apache (OHS),why ?

Hi,
When scale more than 1500 users, my applications response time degrades.If i use IIS as my webserver I am able to scale more than 3000 users, is there any bottleneck in the oracle apache (OHS) ?
OHS Config
Timeout = 300
KeepAlive = ON
MaxKeepAliveRequests = 100
KeepAliveTimeout = 15
MaxRequestsPerChild = 0
ThreadsPerChild = 5000
SendBufferSize = 16384
MaxClients = 5000
Regards
Vino joy

Hi Jean,
Our application contains customised retail webcenter portal on which retail application is hosted.This portal application is not able to scale up more than 10 users.I had created portal application without the customised framework and then for a similar usecase it is able to scale upto more than 50 users but once it hits 100 VU mark it starts giving errors.If it were an issue with client tokens or login,I would have been able to have more than 1 user at a time.It seems to be an issue with custom framework developed on top of webcenter portal.I have faced a similar issue while testing for this app with jmeter also.I was able to test for the webcenter portal app without any customisation for more than 100 concurrent users. But I was not able to test for more than 1 user for customised retail webcenter portal
Thanks,
Ritesh
Edited by: user766882 on Aug 21, 2012 8:25 AM
Edited by: user766882 on Aug 21, 2012 8:33 AM

WLC cannot get IP of the Wireless Clients and client not able to ping to the gateway

Dear Cisco Expertise,
I have configured WLC embedded in Cisco C3650 switch and also 1 unit AP3702I. AP now able to join to the controller. My client able to connect to the AP and get the IP address (10.127.117.1) from the DHCP server but unable to ping to the gateway (10.127.117.254 - interface gateway). Both switch and AP able to ping to the interface gateway. I also trying to ping to the client from the switch and also from the AP to the client but not able to ping.
I've check via switch can see the client's IP address and MAC address (using ARP)
#sh arp vlan 77
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.127.117.1 0 843a.4b90.17e0 ARPA Vlan77
Internet 10.127.117.254 - 3c08.f6b7.2173 ARPA Vlan77
Need your expertise on this matter. Thank you.
Configuration as below:
Switch
ip dhcp pool LWAPP_VLAN
network 10.127.117.0 255.255.255.0
default-router 10.127.117.254
dns-server 10.127.113.10
domain-name xxx.com
vlan 77
name LWAP_VLAN
interface Vlan10
ip address 10.127.112.254 255.255.255.128
interface Vlan77
ip address 10.127.117.254 255.255.255.0
ip helper-address 10.127.117.254
interface GigabitEthernet3/0/5
description Connect to AP Test
switchport access vlan 10
switchport mode access
no logging event link-status
wireless mobility controller
wireless management interface Vlan10
wireless security web-auth retries 5
wireless mgmt-via-wireless
wlan APAC-WLAN 2 Wifi-Test
client vlan LWAP_VLAN
ip dhcp opt82
ip dhcp opt82 ascii
ip dhcp opt82 format add-ssid
ip dhcp required
ip dhcp server 10.127.117.254
no security wpa akm dot1x
security wpa akm psk set-key ascii 0 B*MY2014
security wpa wpa2 ciphers tkip
session-timeout 300
no shutdown
ap group APGroup-Test
description "For Testing Purposes"
wlan APAC-WLAN
vlan LWAP_VLAN
AP
interface Dot11Radio0
antenna gain 0
stbc
mbssid
power client local
packet retries 64 drop-packet
station-role root
interface Dot11Radio1
antenna gain 0
stbc
mbssid
power client local
packet retries 64 drop-packet
station-role root
interface GigabitEthernet0
duplex auto
speed auto
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface BVI1
mtu 1792
ip address 10.127.112.202 255.255.255.128
interface Virtual-WLAN0
ip default-gateway 10.127.112.254
ip forward-protocol nd
ip dns server

Pls try the below SSID configuration. WPA2 to be configured with AES & not TKIP.
wlan APAC-WLAN 2 Wifi-Test
client vlan LWAP_VLAN
security wpa
no security wpa akm dot1x
security wpa wpa2 ciphers aes
security wpa akm psk set-key ascii 0 B*MY2014
ip dhcp required
no shutdown
This post should give you some help as well
http://mrncciew.com/2013/12/04/wlan-config-in-3850-part-1/
HTH
Rasika
**** Pls rate all useful responses ****

Client not able to access EJB deployed in Oracle8i

Hi,
After lot of pains, I was able to deploy EJB in the Oracle8i DB.
Now I am facing problems when the Client makes an request to get the reference of this deployed EJB.
This is the error I receive :
"C:\JDeveloper3.0\java1.2\jre\bin\javaw.exe" -mx50m -classpath "C:\sandeep\JDeveloper3.0\class;C:\JDeveloper3.0\lib\jdev-rt.zip;C:\JDeveloper3.0\jdbc\lib\oracle8.1.5\classes111.zip;C:\JDeveloper3.0\lib\connectionmanager.zip;C:\JDeveloper3.0\li b\javax_ejb.zip;C:\JDeveloper3.0\aurora\lib\aurora_client.jar;C:\JDeveloper3.0\aurora\lib\vbjorb.jar;C:\JDeveloper3.0\aurora\lib\vbjapp.jar;C:\JDeveloper3.0\aurora\lib\vbjtools.jar ;C:\JDeveloper3.0\aurora\lib\vbj30ssl.jar;C:\sandeep\JDeveloper3.0\project\MyEJBRemoteSource.jar;C:\sandeep\JDeveloper3.0\project\MyEJBRemoteGenerated.jar;C:\JDeveloper3.0\java1.2\ jre\lib\rt.jar;C:\JDeveloper3.0\lib\jboejb.jar" LearnEJBPack.EJBClient
Creating an initial context
Looking for the EJB published as 'test/MyEJBClass'
java.lang.NoClassDefFoundError: oracle.aurora.rdbms.ClassResolver
java.lang.Object oracle.aurora.jndi.sess_iiop.sess_iiopURLContextFactory.getObjectInstance(java.lang.Object, javax.naming.Name, javax.naming.Context, java.util.Hashtable)
javax.naming.Context javax.naming.spi.NamingManager.getURLContext(java.lang.String, java.lang.Object, java.util.Hashtable)
javax.naming.Context javax.naming.spi.NamingManager.getURLContext(java.lang.String, java.util.Hashtable)
javax.naming.Context javax.naming.InitialContext.getURLOrDefaultInitCtx(java.lang.String)
java.lang.Object javax.naming.InitialContext.lookup(java.lang.String)
void LearnEJBPack.EJBClient.main(java.lang.String[])
Exception in thread main
I donot understand why it is not able to find
oracle.aurora.rdbms.ClassResolver.
Do I also need to load some other classes also?
Let me know.
Thanks
Sandeep
Details : JDeveloper 3.0 Oracle 8.1.5i Windows 2000

Hi Giri,
In SQL Server Help file content are i pasted here
Using the Local Service Account
The Local Service account is a special, built-in account that is similar to an authenticated user account.
The Local Service account has the same level of access to resources and objects
as members of the Users group. This limited access helps safeguard your system
if individual services or processes are compromised. Services that run as the Local
Service account access network resources as a null session with no credentials.
Using the Network Service Account
The Network Service account is a special, built-in account that is similar to an authenticated
user account. The Network Service account has the same level of access to resources and
objects as members of the Users group. Services that run as the Network Service account
access network resources using the credentials of the computer account.
Important:
Microsoft recommends that you do not use the Network Service account for the SQL Server
or SQL Server Agent services. Local User or Domain User accounts are more appropriate
for these SQL services.
Using the Local System Account
The Local System account is a highly privileged account; use caution when assigning
Local System permissions to SQL Server service accounts.
Security Note:
To increase the security of your SQL Server installation, run SQL Server services under
a local Windows account with the lowest possible privileges.
Regards
Jambulingam.P
Edited by: Jambulingam P on Aug 12, 2009 1:58 PM

Clients not able to join more 256 nos

Similar Messages

Maybe you are looking for