Clients Not seeing DHCP server at branch office or not accepting ip offers (NO LOG REPORTS KIND OF IN THE DARK)

Hi there i am having an issue that has popped up recently i have a DC at a branch office that is connected to the main office DC via a Persistent Demand Dial connection in RRAS. Everything was working properly according to me until i found out that the Network
Admin who manages the branch office network failed to notify me that client machines weren't getting IP addresses from the DHCP server. This server was recently installed and wasn't fully implemented till about a week ago when i configured the Demand Dial
connection in RRAS up until that point it just had a regular old VPN connection to the main office while we worked out the kinks with a few things. the things ive tried so far to get DHCP working are as followed
1.Rebooted the branch office server (MULTIPLE TIMES)
2. Uninstalled the DHCP Role and re-installed it....To my surprise 1 client managed to get a ip on its lan adapter after DHCP was re-installed but nothing else
3. Disconnected the connection between the main office DC and the Branch office DC as i figured the main office DC DHCP server might be interfering with the branch office DC DHCP Server but nothing happened 
4. Unauthorized and Reauthorized the main office DHCP server and the branch office DHCP server nothing changed
5. sifted through multiple log files on both servers and found noting in fact DHCP logs are empty on both servers
6. restored backups of the DHCP servers from when they were working
7. came here cause im out of ideas and im pulling my hair out
here are the current statistics from the problem server
Start Time: 7/12/2014 2:02:10PM
Up Time: 1Hours, 18 Minutes, 41 Seconds
Discovers: 90
Offers: 90
Requests: 2
Acks: 13
Nacks: 0
Declines: 0
Releases: 0
Total Scopes: 1
Total Addresses 253
In Use 2 (0%)
Available: 251 (99%)
Id like to add that RRAS was getting IP addresses from the problem server up until the point i uninstalled the role and re-installed it
heres is a ipconfig /all from the problem server
Windows IP Configuration
   Host Name . . . . . . . . . . . . : MNB-DC
   Primary Dns Suffix  . . . . . . . : VTEACR.LOCAL
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : VTEACR.LOCAL
PPP adapter Remote Router:
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Remote Router
   Physical Address. . . . . . . . . :
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.141.70.25(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 10.141.70.10
   NetBIOS over Tcpip. . . . . . . . : Disabled
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : 00-16-35-AB-D3-05
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::d9e:daa4:34dd:db44%10(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.141.80.102(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : fe80::226:5aff:feb7:5b3c%10
                                       10.141.80.1
   DNS Servers . . . . . . . . . . . : ::1
                                       10.141.80.102
   NetBIOS over Tcpip. . . . . . . . : Enabled
PPP adapter RAS (Dial In) Interface:
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : RAS (Dial In) Interface
   Physical Address. . . . . . . . . :
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 169.254.238.243(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter Local Area Connection* 8:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : isatap.{427DF66B-3B30-40B1-B67E-B5587465C
394}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : isatap.ziricom.com
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 12:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : isatap.VTEACR.LOCAL
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 13:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : isatap.{BE201060-A9B9-404A-8361-F8FFB82F5
6F6}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 14:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #5
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 15:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : isatap.VTEACR.LOCAL
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 16:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #7
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 19:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : isatap.ziricom.com
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
if anymore information is needed please let me know i have full access to everything on the network so its not a problem and i am able to remotely access the branch office DC and all computer and switches at any time of the day
Viper Technologies Computer Repair Putting The Venomus Bite Back In Your Computer We Are Located In Antigonish ,NS Canada Check Us Out HTTP://WWW.VIPERTECHNOLOGIES.TK

Hi,
Does this issue occur on one client or multiple?
Please check this article:
http://technet.microsoft.com/en-us/library/cc757164(v=ws.10).aspx#BKMK_5
Regards.
Vivian Wang

Similar Messages

  • Windows 8.1 laptop not connecting to domain in branch office

    We have a problem with a laptop. 
    It is installed in our Head office (The Netherlands), just like all other laptops by using an image.
    Tested and working on the domain.
    The user had to go to one of our branch offices (China) and when he connected there, the laptop just won't connect to the domain.
    When he plugged in the laptop, it keeps trying to connect it's directaccess.
    Other laptops (same image) immediately recognize the domain network, but this laptop just won't.
    I am able to ping everything on the local network (MPLS connection), from HQ to all Branch offices but not access them.
    I've tried changing the DNS settings, but without any result.
    Any suggestions?

    Hi,
    According to this tool's description, I think it should be helpful to check system current enviroment, such as network, certificates, etc. problem. Actually according to your description, I doubt it probably network enviroment of ISP problem, but we should
    find a way to verify our suspect. Then this tool would be convenient, it also would generate a trace log and it would be helpful with troubleshooting.
    The DirectAccess Client Troubleshooting Tool is a graphical application, based on the .NET Framework, which checks the health of a DirectAccess client by running various tests.  Built-in health tests: The following tests are currently implemented:
    Network interfaces Network location (NLS and NRPT DNS) IP connectivity (6to4, Teredo, IPHTTPS, entry point in a multisite setup, DNS) Windows Firewall (applied profile, Firewall outbound rules) Certificates (EKU Client Authentication, trust chain for AIA and
    CRL) IPsec infrastructure tunnel (Domain SysVol share) IPsec intranet tunnel (PING and HTTP probes) Additional features Run post-check script (PowerShell, VBScript, BAT or CMD file)
    Roger Lu
    TechNet Community Support

  • Branch Office will not host Microsoft services/servers - Sites and Subnets

    Hi,
    The scenario is the following:
    1 Domain. Windows 2012 R2.
    6 sites. 1 DC per site. 3 subnets per site.
    5 sitelinks.
    The sites diagram is the following:
    The branch office "SITE04" will not host any Microsoft service/server/PC. Network routing/flow scheme will not change (branch office SITE04 reamins routing traffic to/from SITE05 and SITE06).
    The questions are:
    Does the existing SITE04 subnets must be deleted?
    Does the existing SITE04 site must be deleted?
    Does the existing SITE04-SITE05 and SITE04-SITE06 site links must be deleted?
    if yes to any of the above questions?
    How to redesign the subnets/sites/site links?
    Thanks in advance!

    Thanks MrX for your response.
    The SITE04 branch office will not host Microsoft-based PCs/Servers/Services. SITE04 will be used for network traffic routing purposes and will host servers from another platform.
    Why to mantain SITE04 subnets?
    Thanks in advance!
    In this case, maintaining the subnets would be optional.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

    Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

    Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

  • Migrate Notes from Exchange server 2007 to office 365

    Hi,
    Anyone help me to how to migrate notes from exchange server 2007 to office 365 . My customer having notes on his existing exchange account  . We would like to move notes to office 365 . 
    Please help me or guide me .
    Thanks & Regards,
    Vinoth

    The way you're doing it has two very high hurdles.
    First, you have to get the data out of an offline server and into Office 365.  That's hardly a trivial task.  If the server were online and reachable by the Internet you could use a move request or a third-party tool like MigrationWiz.
    Second, if you do get the mail moved, you will want to synchronize the legacyExchangeDN attribute from the old organization into an X500 proxy address in Office 365 for all mailboxes to preserve mail replyability.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • DHCP on 'hybrid' network - how to point clients to specific DHCP server

    Moving computers off of a private 'hybrid' network to a different private network.
    ISSUE: The clents will boot and ask for an IP from DHCP, problem is the 'hybrid' network runs a DHCP server with address range of 192.99.x.x  whereas the DHCP server we need to hit is on the 10.2.xx address range.  Is there a simple method to point
    clients to a specific DHCP server? 
    Note: I have requested Network Srvcs to block UDP traffice on ports 67 and 68 for the address range of the 'hybrid' network.
    Users still need access to the hybrid.
    Please advise,
    Many Thanks in advance

    DHCP is rather a simple minded service. The client broadcasts out and the first guy responds. If you ahve two DHCP servers on the same subnet or wire, even if they have different IP addresses on that subnet, and they both have scopes corresponding to
    the IP address of their interface on that subnet/wire, then they will offer DHCP services. DHCP won't give out an IP on an interface that the scope doesn't match the subnet.
    For example, if I have a DHCP server with an IP of 10.200.1.200/24, and a scope of 10.200.1.100-150/24, then it will give out IPs on that interface. However, if that same DHCP server has an interface configured with 192.168.20.150, then DHCP will not give
    out IPs on an interface configured with 10.200.1.100, unless there is a Relay Agent or IP Helper from the router or switch VLAN that is connected to that subnet. You can test this out yourself.
    A separate VLAN for each subnet solves the problem because you are separating the two servers to hostg DHCP on their own, respective subnets.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • VPN Connected but can not see folders / server

    I have established a connection between an OSX server and client but now can not see the server or any services on the client.  There are no servers listed in the 'Network' section of finder and using 'Connect to server' I can not see it either. The log on the server shows the connection and the client does as well but other than that I can not do anything with the connection.
    Details
    - Using 10.6 osx server and a 10.6 client.
    - Connected via VPN, L2TP
    Thanks,
    Brian

    I have connected to VPN but can't see anything on my finder or desktop.
    I tried connecting to server by doing command+K and entered the ip address like afp://ipaddress/user
    doesn't work. I get error message saying:
    Connection Failed
    The server "165.124.164.125" is available on your computer. Access the volumes and files locally.
    help!!

  • Aironet 1130AG is not contacting DHCP Server

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    The Aironet will not hand out an IP address, I have set another DHCP server and no luck, the laptops get an error message Limited or no connectivity, I'm using LDAP and cert for authentication, is there some setting that needs to turned on to pass DHCP traffic?

    give us the show tech from the AP whenn clients are failing...
    If runninng lightweight please give us more details.
    security type, eap method, server, association table.. etc...

  • Migrating clients from one DHCP server (in forest A) to a new DHCP server (in forest B)

    The scenario:  clients have recently been migrated from one forest to a new forest but are currently using the DHCP server located in the old forest.  The goal is to force the clients to start leasing from the new DHCP server in the new forest
    as soon as possible.  The users are still on the same network segment with the same address range.  There is currently DNS forwarding between the two forests.

    Keep in mind, during the transition, DNS for both the old forest and the new forest must have resolution setup between them, such as using Forwarding. This way with configuring DNS for DHCP clients (DHCP option 006), they'll still be able to resolve
    the new forest name still using the old DNS. However, keep in mind, registration will not work until you switch over to the new forest's DNS.
    As for Option 015, the Connection Specific Search Suffix, I would avoid using that until all machines have been migrated.
    AD DS and DNS Server Migration: Post-Migration Tasks
    http://technet.microsoft.com/en-us/library/dd392270(v=ws.10).aspx
    DHCP Server Migration Guide
    http://technet.microsoft.com/en-us/library/dd379535.aspx
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • EP not see MDM server

    Hi Gurus
    When I create a new MDM system in a Portal Content -> MDM Connection Wizard on step 4 (Select Repository) I cannot select any MDM repository because the drop-down empty. So I cannot finish the wizard and create a new MDM system reference in EP.
    My EP (NW 7.00 SP13) and MDM Server (5.5 SP6) are running on the same host. In MDM Console I can connect to my MDM server and see the MDM repository mounted to it.
    What is the problem with the MDM Connection Wizard? Maybe I specified the wrong properties on steps 1-3?
    Please, help!
    Thanks and Regards,
    Sergei

    >1. Verify that you have deployed the correct SCA files i.e. of compatible version with that of MDM Server
    >2. Only running repositories would be visible in the drop down
    >3. Try passing Server IP instead of Server Name
    1. How can I check this? I deployed the following SCAs: BP_MDM_TECHNOLOGY (5.50.6.0), MDM_JAVA_API (5.50.6.0) & MDM_WEB_UI. My MDM server seems a little bit newer: it's version is 5.5.64.92. Can it cause the problem?
    2. Yes, MDM server is running and the remote repository is loaded too.
    3. I've tried this. No any changes in behavior.
    In general when I come to the step Select Repository I do not see any delays. It seems the EP's wizard does not even try to connect to MDM server host which I specified on step 3. If, for example, I specify any unreachable wrong MDM Server host and go to step Select Repository it'll appear immediately without any connection attempts to the wrong host.
    Maybe something need to be configured additionally? What I did was I installed MDM Server + Console, started the MDM server, created and mounted MDM repository located on the remote MS SQL Server, then I deployed the SCAs mentioned before and restarted my J2EE server.
    Thanks and Regards,
    Sergei

  • HT4437 Using Mac pro OSX Lion and new purchase of Apple TV - can not see Airplay status icon and can therefore not mirror - Apple TV is seeing router as is the Mac !??

    Have purchased Apple TV.    Set up was OK (saw the wifi router and finalised with getting into itunes - but only purchased items)
    Want to use the Apple TV to view my mac pro screen to use itunes (selection of ANY of my songs) and to display images from my photo folders (mirroring)
    Can not see the 'airplay' icon!!!!??

    Here is a list of requirements for AirPlay Mirroring: http://support.apple.com/kb/ht5404

  • Windows 8.1 Not Seeing Ubuntu Server

    I have been running a file server with Ubuntu Server 14.04.1 as the OS and Samba 4.1.6 to share the files. I was able to connect to the server and access all of its drives from both my desktop and laptop running Windows 7. I
    upgraded my laptop to Windows 8.1 Pro and am now unable to connect to the server or its drives. The server does not show up at all during network discovery.
    I am still able to connect to the server and drives from my desktop that is still running Windows 7. I tried connecting via a direct path from my laptop and got error 0x80004005 and Windows cannot access \\Server message. I have verified
    that the laptop is on the same workgroup as the server and file sharing is turned on and works for connection to my desktop. Is there a new setting in Windows 8.1 that would block my Ubuntu server?

    Hi  Kylep,
    First, you should check whether the "TCP/IP NetBIOS Helper" in services panel is turned on,  the TCP/IP NetBIOS Helper service provides support for the NetBIOS over TCP/IP (NetBT) service and NetBIOS name resolution for clients on your network,
    enabling users to share files, print, and log on to the network.
    Besides, you can try to reset TCP/IP if you are still faced with the same issue:
    To reset TCP/IP
    http://support.microsoft.com/kb/299357
    Regards
    Wade Liu
    TechNet Community Support

  • Macbook w/10.6.8 not seeing print server

    So here's the problem with 2 of my macbooks with 10.6.8 on it. We recently set up a new print server and is working for all of our other laptop of same the vintage except for 2 of them. I've redone there network settings-that's fine. I've rebound them to our network-that's fine too. I've reset the print system-that's worked perfectly with all of the other laptops except these 2. I've cleared the MCX cache. Deleted CIJScannerRegister.plist. I've even reset the pram and smc just to be complete about it but still none of the printers for that building show up (that do show up for all the other laptop of same model and also 10.6.8)
    What am i missing?
    Also, i've verified that the 2 laptops are indeed in the correct print group in WGM.

    Hello CMattos,
    Thank you for the details of the issue you are experiencing with printing from 2 of your MacBooks.  You have taken some really good troubleshooting steps already.  I found an article with a few additional steps you can take.  I recommend following the steps below (you can skip the steps you have already taken):
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Additional Information
    Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.  For more details, see this article.
    You can find the full article here:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Acrobat XI & Not Seeing Acrobat Main Tab in Office 2013

    I bought Acrobat XI & Office 2013.  Installed Acrobat XI first.  Then Installed Office 2013 next.  Opened Office 2013 word, excel, outlook, etc and NO Acrobat main tab.  Checked forums & Acrobat support and made sure Add-Ins in the customized Main Tab was checked, and COM Add-ins is pointing to XI and not disabled.  Still NO Acrobat main tab in the ribbon.  What am I doing wrong?!
    MS Word 2013, Excel have the Acrobat in the Add-ins but is missing Acrobat tab to right of View. Only in MS Outlook I got an error message (pic 3).
    MS Word 2013 w/o Acrobat XI - there's the Acrobat checked on Add-ins but doesn't have the main tab to the right of View.
    MS Excel 2013 w/o Acrobat XI - there's the Acrobat checked on Add-ins but doesn't have the main tab to the right of View.
    MS Outlook 2013 w/o Acrobat XI - there's the Acrobat on Inactive Add-ins and have the following error message:
    "Not loaded. A runtime error ocurred during the loading of the Add-in."
    Please help me, I don't know what else to do, installed and re-installed both MS-Office & Acrobat in different order. Nothing worked.
    Any suggestions?
    Sandra

    Hi Sandra,
    Can you please update Adobe Acrobat XI and then check for the issue. The latest version of Adobe Acrobat XI is 11.0.06. You can update Acrobat by following steps below:
    - Launch Acrobat XI;
    - Click on Help --> Check for Updates.

  • Home Sharing will not work with my Windows 8 64bit with new itunes.  All of my Apple TVs will not see my library and my iphones will not function with the "Remote" App.  They all did before.  Only thing that has changed is new PC/itunes.  Any Ideas?

    Installed a new Windows PC on my home network.  PC is Windows 8/64bit. with latest version of itunes 11.1.4.62 for 64bit.  My itunes works, but I can not get Home Sharing to function now.  None of my Apple TV's can see my computer library and prompt me to turn it on.  All of my iphones, pods, pad, can not use the "Remote" app.  When you prompt your phone in Remote App to "add library" and you get the code....iTunes doesnt give you the remote screen where you can enter the code.  I have reloaded iTunes, reset my router, updated all devices.  You can turn on "Home Sharing" on iTunes, but then it closes and doesnt seem to link my devices like it use to.  Also, when the new version of iTunes is up on my PC, you can see the other devices to AirPlay to like you could before.  However, I can send items from my iphone to stream to an Apple TV, I just cant link them all like I could before and control the music playing to multiple Apple TV.  Growing fustrated.  Any ideas, would be helpful.

    Cunning1_
    You are a legend!!  I have spent countless hours uninstalling, reinstalling itunes, playing with firewall settings, reading articles on this problem!!  I only have to un-sync my iphone 5 and then the airplay icon magically appeared!!!  Maybe I have too many devices syncing via wi-fi, or maybe it is the Iphone syncing??
    Whatever - one step and now I can enjoy my music through my house again!
    Thank you, Thank you, Thank you 

Maybe you are looking for