Clients not updating from new WSUS server
I had 2 DCs in place running 2008 and 2003. The 2003 server was also running WSUS. It has been replaced with a 2012 R2 Essentials server which is now the FSMO holder and I installed WSUS on it using the standard options like I always do. Administration
runs on 8530.
I updated the GPOs with the new server's name. All clients can ping the WSUS server by name. All clients are reporting to the server and updates have been approved days ago. However none of the clients, including the server itself, are seeing any new updates
available even though the WSUS console shows they are reporting.
I've searched the registry of the 2008 DC for references to the old WSUS server and none were found. I looked in the registry key where you would find the value put there from the GPO and it correctly shows the current WSUS server.
I looked in the windowsupdate log on the 2008 DC and I don't see any errors. So I'm stumped as to why the clients can at least see the WSUS server and report to it but they aren't seeing the approved updates. Any ideas?
Jonathan
Hi Jonathan,
Have you checked if the update is downloaded successfully? The update will not be available until it has been downloaded on the WSUS server.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Yes the updates have all downloaded as verified in the WSUS console. So the updates are there, the clients are reporting in and showing what updates they need, but what is not happening is that final connection so you see the little "pending updates"
icon in the system tray. I've done wuauclt /detectnow many times (used to doing this with other sites I manage) and had WU check for updates but it always shows none available.
Jonathan
Similar Messages
-
Why won't my clients register with my new WSUS server??
Hi All,Been running WSUS 3.0 SP2 on Server 2008 for a good few years now (originally moved away from it running on Server 2003 when I first started in my current role), and a couple of days back, I finally got round to throwing up a new 2012 VM with the WSUS role installed...When I moved clients from the 2003 WSUS to the 2008 instance, literally all I did was change the intranet location in the GPO I had created for WSUS to point to the 2008 server, and voila! Clients started reporting in within a few hours!This time, it's been 2 days now, and even though I've changed the GPO, and verified that it has updated on the clients by using GPResult, none of them have contacted the new WSUS server yet...I've tried running wuauclt with the /detectnow and /reportnow switches, and nothing.How exasperating!
This topic first appeared in the Spiceworks CommunityHi All,Been running WSUS 3.0 SP2 on Server 2008 for a good few years now (originally moved away from it running on Server 2003 when I first started in my current role), and a couple of days back, I finally got round to throwing up a new 2012 VM with the WSUS role installed...When I moved clients from the 2003 WSUS to the 2008 instance, literally all I did was change the intranet location in the GPO I had created for WSUS to point to the 2008 server, and voila! Clients started reporting in within a few hours!This time, it's been 2 days now, and even though I've changed the GPO, and verified that it has updated on the clients by using GPResult, none of them have contacted the new WSUS server yet...I've tried running wuauclt with the /detectnow and /reportnow switches, and nothing.How exasperating!
This topic first appeared in the Spiceworks Community -
2012 R2 machines not finding updates from 2012 WSUS Server
So I've seen some similar things to what I'm seeing mentioned but haven't found an exact replica.
Our WSUS machine is running Server 2012 and syncs its patches down from a different WSUS machine also running 2012.
WSUS is version 6.2.9200.
We have spun up a number of 2012 R2 VMs lately and just noticed that those machines are not getting their updates. The machines running 2012 Non-R2 are working just fine.
The windowsupdate.log file from one of the 2012 R2 machine has various lines such as:
WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
I've seen reference to a KB article that applies to WSUS 3.2 but we don't have that so I'm not sure what else we can try.
Any ideas would be great.
Thanks!Here's a whole chunk of the log...
2014-12-10 11:45:24:852 788 3f4 Agent *********** Agent: Initializing global settings cache ***********
2014-12-10 11:45:24:852 788 3f4 Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-12-10 11:45:24:852 788 3f4 Agent * WSUS server: http://<wsus_server>:8530
2014-12-10 11:45:24:852 788 3f4 Agent * WSUS status server: http://<wsus_server>:8530
2014-12-10 11:45:24:852 788 3f4 Agent * Target group: SAN
2014-12-10 11:45:24:852 788 3f4 Agent * Windows Update access disabled: No
2014-12-10 11:45:24:852 788 3f4 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2014-12-10 11:45:24:852 788 3f4 WuTask WuTaskManager delay initialize completed successfully..
2014-12-10 11:45:24:852 788 3f4 AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-12-10 20:30:04, not idle-only, not network-only
2014-12-10 11:45:24:852 788 3f4 AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2014-12-11 01:12:30, not idle-only, not network-only
2014-12-10 11:45:24:852 788 3f4 AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2014-12-11 01:11:18, not idle-only, not network-only
2014-12-10 11:45:24:852 788 3f4 Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2014-12-10 11:45:24:852 788 3f4 Report CWERReporter::Init succeeded
2014-12-10 11:45:24:852 788 3f4 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-12-10 11:45:24:852 788 3f4 DnldMgr Download manager restoring 0 downloads
2014-12-10 11:45:24:852 788 7934 AU ########### AU: Initializing Automatic Updates ###########
2014-12-10 11:45:24:852 788 7934 AU Additional Service {855E8A7C-ECB4-4CA3-B045-1DFA50104289} with Approval type {Pre-download notify} added to AU services list
2014-12-10 11:45:24:852 788 7934 AU AIR Mode is disabled
2014-12-10 11:45:24:852 788 7934 AU # Policy Driven Provider: http://<wsus_server>:8530
2014-12-10 11:45:24:852 788 7934 AU # Detection frequency: 2
2014-12-10 11:45:24:852 788 7934 AU # Target group: SAN
2014-12-10 11:45:24:852 788 7934 AU # Approval type: Pre-install notify (Policy)
2014-12-10 11:45:24:852 788 7934 AU # Auto-install minor updates: Yes (Policy)
2014-12-10 11:45:24:852 788 7934 AU # ServiceTypeDefault: Service 855E8A7C-ECB4-4CA3-B045-1DFA50104289 Approval type: (Pre-download notify)
2014-12-10 11:45:24:852 788 7934 AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-12-10 11:45:24:852 788 3f4 IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 4; does use network; is not at background priority
2014-12-10 11:45:24:852 788 3f4 IdleTmr Incremented idle timer priority operation counter to 1
2014-12-10 11:45:24:883 788 7934 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-12-10 11:45:24:883 788 7934 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-10 11:45:24:883 788 7934 AU AU finished delayed initialization
2014-12-10 11:45:24:883 788 7934 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-10 11:45:24:883 788 7934 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-10 11:45:24:883 788 7934 AU Adding timer:
2014-12-10 11:45:24:883 788 7934 AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-12-10 20:30:04, not idle-only, not network-only
2014-12-10 11:45:24:883 788 3598 DnldMgr Asking handlers to reconcile their sandboxes
2014-12-10 11:45:25:118 788 3f4 Report *********** Report: Initializing static reporting data ***********
2014-12-10 11:45:25:118 788 3f4 Report * OS Version = 6.3.9600.0.0.196880
2014-12-10 11:45:25:118 788 3f4 Report * OS Product Type = 0x00000007
2014-12-10 11:45:25:118 788 3f4 Report * Computer Brand = Microsoft Corporation
2014-12-10 11:45:25:118 788 3f4 Report * Computer Model = Virtual Machine
2014-12-10 11:45:25:118 788 3f4 Report * Platform Role = 1
2014-12-10 11:45:25:118 788 3f4 Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-12-10 11:45:25:118 788 3f4 Report * Bios Revision = 090006
2014-12-10 11:45:25:118 788 3f4 Report * Bios Name = BIOS Date: 05/23/12 17:15:53 Ver: 09.00.06
2014-12-10 11:45:25:118 788 3f4 Report * Bios Release Date = 2012-05-23T00:00:00
2014-12-10 11:45:25:118 788 3f4 Report * Bios Sku Number unavailable.
2014-12-10 11:45:25:118 788 3f4 Report * Bios Vendor = American Megatrends Inc.
2014-12-10 11:45:25:118 788 3f4 Report * Bios Family unavailable.
2014-12-10 11:45:25:118 788 3f4 Report * Bios Major Release unavailable.
2014-12-10 11:45:25:118 788 3f4 Report * Bios Minor Release unavailable.
2014-12-10 11:45:25:118 788 3f4 Report * Locale ID = 1033
2014-12-10 11:45:25:321 788 3f4 Agent *** START *** Queueing Finding updates [CallerId = <<PROCESS>>: wsmprovhost.exe Id = 1]
2014-12-10 11:45:25:321 6520 7e34 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = <NULL>]
2014-12-10 11:45:25:321 788 5d44 Agent *** END *** Queueing Finding updates [CallerId = <<PROCESS>>: wsmprovhost.exe Id = 1]
2014-12-10 11:45:25:321 788 5d44 Agent *************
2014-12-10 11:45:25:321 788 5d44 Agent ** START ** Agent: Finding updates [CallerId = <<PROCESS>>: wsmprovhost.exe Id = 1]
2014-12-10 11:45:25:321 788 5d44 Agent *********
2014-12-10 11:45:25:321 788 5d44 Agent * Online = Yes; Ignore download priority = No
2014-12-10 11:45:25:321 788 5d44 Agent * Criteria = "IsInstalled=0 and Type='Software'"
2014-12-10 11:45:25:321 788 5d44 Agent * ServiceID = {00000000-0000-0000-0000-000000000000} Third party service
2014-12-10 11:45:25:321 788 5d44 Agent * Search Scope = {Machine}
2014-12-10 11:45:25:321 788 5d44 Agent * Caller SID for Applicability: S-1-5-21-806291793-1681129048-438139985-1157
2014-12-10 11:45:25:321 788 5d44 Agent * RegisterService is set
2014-12-10 11:45:25:321 788 5d44 EP Got WSUS Client/Server URL: "http://<wsus_server>:8530/ClientWebService/client.asmx"
2014-12-10 11:45:25:524 788 5d44 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-12-10 11:45:25:524 788 5d44 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://<wsus_server>:8530/ClientWebService/client.asmx
2014-12-10 11:45:25:524 788 5d44 PT WARNING: Cached cookie has expired or new PID is available
2014-12-10 11:45:25:524 788 5d44 EP Got WSUS SimpleTargeting URL: "http://<wsus_server>:8530"
2014-12-10 11:45:25:524 788 5d44 IdleTmr WU operation (CAuthorizationCookieWrapper::InitializeSimpleTargetingCookie) started; operation # 9; does use network; is at background priority
2014-12-10 11:45:25:524 788 5d44 PT Initializing simple targeting cookie, clientId = 3f3f03ad-8b6d-4376-838f-dc20db797924, target group = SAN, DNS name = <client machine>.domain.us
2014-12-10 11:45:25:524 788 5d44 PT Server URL = http://<wsus_server>:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-12-10 11:45:25:680 788 5d44 IdleTmr WU operation (CAuthorizationCookieWrapper::InitializeSimpleTargetingCookie, operation # 9) stopped; does use network; is at background priority
2014-12-10 11:45:25:680 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::GetCookie_WithRecovery) started; operation # 10; does use network; is at background priority
2014-12-10 11:45:25:696 788 5d44 WS WARNING: Nws Failure: errorCode=0x803d0013
2014-12-10 11:45:25:696 788 5d44 WS WARNING: The body of the received message contained a fault.
2014-12-10 11:45:25:696 788 5d44 WS WARNING: Soap fault info:
2014-12-10 11:45:25:696 788 5d44 WS WARNING: reason: Fault occurred
2014-12-10 11:45:25:696 788 5d44 WS WARNING: code: Client
2014-12-10 11:45:25:696 788 5d44 WS WARNING: detail: <detail><ErrorCode>ConfigChanged</ErrorCode><Message></Message><ID>20d8f518-d8e5-4bf0-9930-fa46aa9963d0</ID><Method>"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"</Method></detail>
2014-12-10 11:45:25:696 788 5d44 WS WARNING: Soap fault detail: errorCode='ConfigChanged', message='(null)', id='20d8f518-d8e5-4bf0-9930-fa46aa9963d0', method='"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"'
2014-12-10 11:45:25:696 788 5d44 WS FATAL: OnCallFailure failed with hr=0X80244007
2014-12-10 11:45:25:696 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::GetCookie_WithRecovery, operation # 10) stopped; does use network; is at background priority
2014-12-10 11:45:25:696 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::GetConfig_WithRecovery) started; operation # 11; does use network; is at background priority
2014-12-10 11:45:25:696 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::GetConfig_WithRecovery, operation # 11) stopped; does use network; is at background priority
2014-12-10 11:45:25:696 788 5d44 PT WARNING: Cached cookie has expired or new PID is available
2014-12-10 11:45:25:696 788 5d44 EP Got WSUS SimpleTargeting URL: "http://<wsus_server>:8530"
2014-12-10 11:45:25:696 788 5d44 IdleTmr WU operation (CAuthorizationCookieWrapper::InitializeSimpleTargetingCookie) started; operation # 12; does use network; is at background priority
2014-12-10 11:45:25:696 788 5d44 PT Initializing simple targeting cookie, clientId = 3f3f03ad-8b6d-4376-838f-dc20db797924, target group = SAN, DNS name = <client machine>.domain.us
2014-12-10 11:45:25:696 788 5d44 PT Server URL = http://<wsus_server>:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-12-10 11:45:25:711 788 5d44 IdleTmr WU operation (CAuthorizationCookieWrapper::InitializeSimpleTargetingCookie, operation # 12) stopped; does use network; is at background priority
2014-12-10 11:45:25:711 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::GetCookie_WithRecovery) started; operation # 13; does use network; is at background priority
2014-12-10 11:45:25:711 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::GetCookie_WithRecovery, operation # 13) stopped; does use network; is at background priority
2014-12-10 11:45:25:727 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::RegisterComputer_WithRecovery) started; operation # 14; does use network; is at background priority
2014-12-10 11:45:25:727 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::RegisterComputer_WithRecovery, operation # 14) stopped; does use network; is at background priority
2014-12-10 11:45:25:743 788 5d44 Agent Reading cached app categories using lifetime 604800 seconds
2014-12-10 11:45:25:743 788 5d44 Agent Read 0 cached app categories
2014-12-10 11:45:25:743 788 5d44 Agent SyncUpdates adding 0 visited app categories
2014-12-10 11:45:26:852 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover) started; operation # 15; does use network; is at background priority
2014-12-10 11:45:26:868 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 15) stopped; does use network; is at background priority
2014-12-10 11:45:26:914 788 5d44 Agent Reading cached app categories using lifetime 604800 seconds
2014-12-10 11:45:26:914 788 5d44 Agent Read 0 cached app categories
2014-12-10 11:45:26:914 788 5d44 Agent SyncUpdates adding 0 visited app categories
2014-12-10 11:45:26:930 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover) started; operation # 16; does use network; is at background priority
2014-12-10 11:45:26:946 788 5d44 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 16) stopped; does use network; is at background priority
2014-12-10 11:45:26:946 788 5d44 PT + SyncUpdates round trips: 2
2014-12-10 11:45:26:961 788 5d44 Agent * Found 0 updates and 72 categories in search; evaluated appl. rules of 391 out of 549 deployed entities
2014-12-10 11:45:26:961 788 5d44 Agent Reporting status event with 0 installable, 3 installed, 0 installed pending, 0 failed and 0 downloaded updates
2014-12-10 11:45:26:961 788 5d44 Agent *********
2014-12-10 11:45:26:961 788 5d44 Agent ** END ** Agent: Finding updates [CallerId = <<PROCESS>>: wsmprovhost.exe Id = 1]
2014-12-10 11:45:26:961 788 5d44 Agent *************
2014-12-10 11:45:26:961 788 5d44 IdleTmr WU operation (CSearchCall::Init ID 1, operation # 4) stopped; does use network; is not at background priority
2014-12-10 11:45:26:961 788 5d44 IdleTmr Decremented idle timer priority operation counter to 0
2014-12-10 11:45:26:977 6520 14cd4 COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = <NULL>]
2014-12-10 11:45:26:977 6520 14cd4 COMAPI - Updates found = 0
2014-12-10 11:45:26:977 6520 14cd4 COMAPI ---------
2014-12-10 11:45:26:977 6520 14cd4 COMAPI -- END -- COMAPI: Search [ClientId = <NULL>]
2014-12-10 11:45:26:977 6520 14cd4 COMAPI -------------
2014-12-10 11:45:32:031 788 3598 Report REPORT EVENT: {1741962D-41AC-4176-A531-B114876AB6FB} 2014-12-10 11:45:26:961-0800 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 <<PROCESS>>: wsmprovhost.exe Success Software Synchronization Windows Update Client successfully detected 0 updates.
2014-12-10 11:45:32:031 788 3598 Report REPORT EVENT: {58279745-23CB-42FD-ADD8-27221DBA991C} 2014-12-10 11:45:26:961-0800 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 <<PROCESS>>: wsmprovhost.exe Success Pre-Deployment Check Reporting client status.
2014-12-10 11:45:32:156 788 3598 Report CWERReporter finished handling 2 events. (00000000)
2014-12-10 11:52:53:642 788 7934 AU AU received policy change subscription event
2014-12-10 11:53:19:846 788 ea40 IdleTmr Incremented idle timer priority operation counter to 1
2014-12-10 11:53:30:289 788 ea40 AU Triggering AU detection through DetectNow API
2014-12-10 11:53:30:289 788 ea40 AU Additional Service {855E8A7C-ECB4-4CA3-B045-1DFA50104289} with Approval type {Pre-download notify} added to AU services list
2014-12-10 11:53:30:289 788 ea40 AU Triggering Online detection (interactive)
2014-12-10 11:53:30:289 788 ea40 AU Adding timer:
2014-12-10 11:53:30:289 788 ea40 AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-12-10 19:53:30, not idle-only, not network-only
2014-12-10 11:53:30:336 788 7934 AU #############
2014-12-10 11:53:30:336 788 7934 AU ## START ## AU: Search for updates
2014-12-10 11:53:30:336 788 7934 AU #########
2014-12-10 11:53:30:336 788 7934 SLS Retrieving SLS response from server using ETAG "4V8nqvoeoxgpu+6kKNNNGpLr4BCvPTmaz82CIDm5o5g=_1440"...
2014-12-10 11:53:30:336 788 7934 SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=174&L=en-US&P=&PT=0x7&WUA=7.9.9600.17195
2014-12-10 11:53:30:757 788 7934 EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
2014-12-10 11:53:30:757 788 7934 SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
2014-12-10 11:53:30:757 788 7934 Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
2014-12-10 11:53:30:757 788 7934 Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
2014-12-10 11:53:30:757 788 7934 SLS Retrieving SLS response from server using ETAG "4V8nqvoeoxgpu+6kKNNNGpLr4BCvPTmaz82CIDm5o5g=_1440"...
2014-12-10 11:53:30:757 788 7934 SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=174&L=en-US&P=&PT=0x7&WUA=7.9.9600.17195
2014-12-10 11:53:30:835 788 7934 EP FATAL: EP: Failed to obtain element node, error = 0x80245002
2014-12-10 11:53:30:835 788 7934 EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80245002
2014-12-10 11:53:30:835 788 7934 Agent WARNING: Failed to obtain the authorization cab URL for service 855e8a7c-ecb4-4ca3-b045-1dfa50104289, hr=0
2014-12-10 11:53:30:835 788 7934 AU Additional Service {855E8A7C-ECB4-4CA3-B045-1DFA50104289} with Approval type {Pre-download notify} added to AU services list
2014-12-10 11:53:30:835 788 7934 IdleTmr WU operation (CSearchCall::Init ID 2) started; operation # 23; does use network; is not at background priority
2014-12-10 11:53:30:835 788 7934 IdleTmr Incremented idle timer priority operation counter to 2
2014-12-10 11:53:30:835 788 7934 Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 2]
2014-12-10 11:53:30:835 788 7934 AU <<## SUBMITTED ## AU: Search for updates [CallId = {1ABA4645-4EC6-4EE0-A65E-1B3EED401384} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-12-10 11:53:30:835 788 7c74 Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 2]
2014-12-10 11:53:30:835 788 7c74 Agent *************
2014-12-10 11:53:30:835 788 7c74 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 2]
2014-12-10 11:53:30:835 788 7c74 Agent *********
2014-12-10 11:53:30:835 788 7c74 Agent * Online = Yes; Ignore download priority = No
2014-12-10 11:53:30:835 788 7c74 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-12-10 11:53:30:835 788 7c74 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-12-10 11:53:30:835 788 7c74 Agent * Search Scope = {Machine & All Users}
2014-12-10 11:53:30:835 788 7c74 Agent * Caller SID for Applicability: S-1-5-21-806291793-1681129048-438139985-1157
2014-12-10 11:53:30:835 788 7c74 Agent * RegisterService is set
2014-12-10 11:53:30:835 788 7c74 EP Got WSUS Client/Server URL: "http://<wsus_server>:8530/ClientWebService/client.asmx"
2014-12-10 11:53:30:835 788 7c74 Setup Checking for agent SelfUpdate
2014-12-10 11:53:30:835 788 7c74 Setup Client version: Core: 7.9.9600.17195 Aux: 7.9.9600.17195
2014-12-10 11:53:30:835 788 7c74 EP Got WSUS SelfUpdate URL: "http://<wsus_server>:8530/selfupdate"
2014-12-10 11:53:30:867 788 7c74 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-12-10 11:53:30:867 788 7c74 Misc Microsoft signed: NA
2014-12-10 11:53:30:867 788 7c74 Misc Infrastructure signed: Yes
2014-12-10 11:53:30:882 788 7c74 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP5B96.tmp with dwProvFlags 0x00000080:
2014-12-10 11:53:30:882 788 7c74 Misc Microsoft signed: NA
2014-12-10 11:53:30:882 788 7c74 Misc Infrastructure signed: Yes
2014-12-10 11:53:30:898 788 7c74 Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
2014-12-10 11:53:30:898 788 7c74 Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2014-12-10 11:53:30:898 788 7c74 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-12-10 11:53:31:304 788 7c74 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-12-10 11:53:31:304 788 7c74 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://<wsus_server>:8530/ClientWebService/client.asmx
2014-12-10 11:53:31:429 788 7c74 Agent Reading cached app categories using lifetime 604800 seconds
2014-12-10 11:53:31:429 788 7c74 Agent Read 0 cached app categories
2014-12-10 11:53:31:429 788 7c74 Agent SyncUpdates adding 0 visited app categories
2014-12-10 11:53:32:632 788 7c74 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover) started; operation # 24; does use network; is at background priority
2014-12-10 11:53:32:647 788 7c74 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 24) stopped; does use network; is at background priority
2014-12-10 11:53:32:647 788 7c74 Agent Reading cached app categories using lifetime 604800 seconds
2014-12-10 11:53:32:647 788 7c74 Agent Read 0 cached app categories
2014-12-10 11:53:32:647 788 7c74 Agent SyncUpdates adding 0 visited app categories
2014-12-10 11:53:32:647 788 7c74 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover) started; operation # 25; does use network; is at background priority
2014-12-10 11:53:32:663 788 7c74 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 25) stopped; does use network; is at background priority
2014-12-10 11:53:32:663 788 7c74 PT + SyncUpdates round trips: 2
2014-12-10 11:53:32:694 788 7c74 Agent * Found 0 updates and 72 categories in search; evaluated appl. rules of 391 out of 549 deployed entities
2014-12-10 11:53:32:694 788 7c74 Agent Reporting status event with 0 installable, 3 installed, 0 installed pending, 0 failed and 0 downloaded updates
2014-12-10 11:53:32:694 788 7c74 Agent *********
2014-12-10 11:53:32:694 788 7c74 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 2]
2014-12-10 11:53:32:694 788 7c74 Agent *************
2014-12-10 11:53:32:694 788 11930 AU >>## RESUMED ## AU: Search for updates [CallId = {1ABA4645-4EC6-4EE0-A65E-1B3EED401384} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-12-10 11:53:32:694 788 11930 AU # 0 updates detected
2014-12-10 11:53:32:694 788 11930 AU #########
2014-12-10 11:53:32:694 788 11930 AU ## END ## AU: Search for updates [CallId = {1ABA4645-4EC6-4EE0-A65E-1B3EED401384} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-12-10 11:53:32:694 788 11930 AU #############
2014-12-10 11:53:32:694 788 11930 AU All AU searches complete.
2014-12-10 11:53:32:694 788 11930 AU AU setting next detection timeout to 2014-12-10 21:34:53
2014-12-10 11:53:32:694 788 11930 AU Adding timer:
2014-12-10 11:53:32:694 788 11930 AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-12-10 21:34:53, not idle-only, not network-only
2014-12-10 11:53:32:694 788 7c74 IdleTmr WU operation (CSearchCall::Init ID 2, operation # 23) stopped; does use network; is not at background priority
2014-12-10 11:53:32:694 788 7c74 IdleTmr Decremented idle timer priority operation counter to 1
2014-12-10 11:53:32:694 788 11930 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-10 11:53:32:694 788 11930 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-10 11:53:37:708 788 3598 Report REPORT EVENT: {27AE31EB-B4E1-4EA9-BA55-6739DF89A1CE} 2014-12-10 11:53:32:694-0800 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdatesWuApp Success Software Synchronization Windows Update Client successfully detected 0 updates.
2014-12-10 11:53:37:708 788 3598 Report REPORT EVENT: {E758788F-E8AE-445C-9276-9FF71398DF7F} 2014-12-10 11:53:32:694-0800 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdatesWuApp Success Pre-Deployment Check Reporting client status.
2014-12-10 11:53:37:708 788 3598 Report CWERReporter finished handling 2 events. (00000000)
2014-12-10 11:53:46:222 788 ea40 AU Triggering AU detection through DetectNow API
2014-12-10 11:53:46:222 788 ea40 AU Additional Service {855E8A7C-ECB4-4CA3-B045-1DFA50104289} with Approval type {Pre-download notify} added to AU services list
2014-12-10 11:53:46:222 788 ea40 AU Triggering Online detection (interactive)
2014-12-10 11:53:46:222 788 ea40 AU Adding timer:
2014-12-10 11:53:46:222 788 ea40 AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-12-10 19:53:46, not idle-only, not network-only
2014-12-10 11:53:46:237 788 7934 AU #############
2014-12-10 11:53:46:237 788 7934 AU ## START ## AU: Search for updates
2014-12-10 11:53:46:237 788 7934 AU #########
2014-12-10 11:53:46:237 788 7934 SLS Retrieving SLS response from server using ETAG "4V8nqvoeoxgpu+6kKNNNGpLr4BCvPTmaz82CIDm5o5g=_1440"...
2014-12-10 11:53:46:237 788 7934 SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=174&L=en-US&P=&PT=0x7&WUA=7.9.9600.17195
2014-12-10 11:53:46:300 788 7934 EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
2014-12-10 11:53:46:300 788 7934 SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
2014-12-10 11:53:46:300 788 7934 Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
2014-12-10 11:53:46:300 788 7934 Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
2014-12-10 11:53:46:300 788 7934 SLS Retrieving SLS response from server using ETAG "4V8nqvoeoxgpu+6kKNNNGpLr4BCvPTmaz82CIDm5o5g=_1440"...
2014-12-10 11:53:46:300 788 7934 SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=174&L=en-US&P=&PT=0x7&WUA=7.9.9600.17195
2014-12-10 11:53:46:362 788 7934 EP FATAL: EP: Failed to obtain element node, error = 0x80245002
2014-12-10 11:53:46:362 788 7934 EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80245002
2014-12-10 11:53:46:362 788 7934 Agent WARNING: Failed to obtain the authorization cab URL for service 855e8a7c-ecb4-4ca3-b045-1dfa50104289, hr=0
2014-12-10 11:53:46:362 788 7934 AU Additional Service {855E8A7C-ECB4-4CA3-B045-1DFA50104289} with Approval type {Pre-download notify} added to AU services list
2014-12-10 11:53:46:362 788 7934 IdleTmr WU operation (CSearchCall::Init ID 3) started; operation # 33; does use network; is not at background priority
2014-12-10 11:53:46:362 788 7934 IdleTmr Incremented idle timer priority operation counter to 2
2014-12-10 11:53:46:362 788 7934 Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 3]
2014-12-10 11:53:46:362 788 7934 AU <<## SUBMITTED ## AU: Search for updates [CallId = {B2623DA3-6D66-4FDB-ADBD-1B1EB04C1926} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-12-10 11:53:46:378 788 130b8 Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 3]
2014-12-10 11:53:46:378 788 130b8 Agent *************
2014-12-10 11:53:46:378 788 130b8 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 3]
2014-12-10 11:53:46:378 788 130b8 Agent *********
2014-12-10 11:53:46:378 788 130b8 Agent * Online = Yes; Ignore download priority = No
2014-12-10 11:53:46:378 788 130b8 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-12-10 11:53:46:378 788 130b8 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-12-10 11:53:46:378 788 130b8 Agent * Search Scope = {Machine & All Users}
2014-12-10 11:53:46:378 788 130b8 Agent * Caller SID for Applicability: S-1-5-21-806291793-1681129048-438139985-1157
2014-12-10 11:53:46:378 788 130b8 Agent * RegisterService is set
2014-12-10 11:53:46:378 788 130b8 EP Got WSUS Client/Server URL: "http://<wsus_server>:8530/ClientWebService/client.asmx"
2014-12-10 11:53:46:378 788 130b8 Setup Checking for agent SelfUpdate
2014-12-10 11:53:46:378 788 130b8 Setup Client version: Core: 7.9.9600.17195 Aux: 7.9.9600.17195
2014-12-10 11:53:46:378 788 130b8 EP Got WSUS SelfUpdate URL: "http://<wsus_server>:8530/selfupdate"
2014-12-10 11:53:46:393 788 130b8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-12-10 11:53:46:393 788 130b8 Misc Microsoft signed: NA
2014-12-10 11:53:46:393 788 130b8 Misc Infrastructure signed: Yes
2014-12-10 11:53:46:409 788 130b8 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP9851.tmp with dwProvFlags 0x00000080:
2014-12-10 11:53:46:409 788 130b8 Misc Microsoft signed: NA
2014-12-10 11:53:46:409 788 130b8 Misc Infrastructure signed: Yes
2014-12-10 11:53:46:425 788 130b8 Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
2014-12-10 11:53:46:425 788 130b8 Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2014-12-10 11:53:46:425 788 130b8 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-12-10 11:53:46:675 788 130b8 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-12-10 11:53:46:675 788 130b8 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://<wsus_server>:8530/ClientWebService/client.asmx
2014-12-10 11:53:46:737 788 130b8 Agent Reading cached app categories using lifetime 604800 seconds
2014-12-10 11:53:46:737 788 130b8 Agent Read 0 cached app categories
2014-12-10 11:53:46:737 788 130b8 Agent SyncUpdates adding 0 visited app categories
2014-12-10 11:53:47:940 788 130b8 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover) started; operation # 34; does use network; is at background priority
2014-12-10 11:53:47:956 788 130b8 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 34) stopped; does use network; is at background priority
2014-12-10 11:53:47:956 788 130b8 Agent Reading cached app categories using lifetime 604800 seconds
2014-12-10 11:53:47:956 788 130b8 Agent Read 0 cached app categories
2014-12-10 11:53:47:956 788 130b8 Agent SyncUpdates adding 0 visited app categories
2014-12-10 11:53:47:956 788 130b8 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover) started; operation # 35; does use network; is at background priority
2014-12-10 11:53:47:972 788 130b8 IdleTmr WU operation (CAgentProtocolTalker::SyncUpdates_WithRecover, operation # 35) stopped; does use network; is at background priority
2014-12-10 11:53:47:972 788 130b8 PT + SyncUpdates round trips: 2
2014-12-10 11:53:48:003 788 130b8 Agent * Found 0 updates and 72 categories in search; evaluated appl. rules of 391 out of 549 deployed entities
2014-12-10 11:53:48:003 788 130b8 Agent Reporting status event with 0 installable, 3 installed, 0 installed pending, 0 failed and 0 downloaded updates
2014-12-10 11:53:48:003 788 130b8 Agent *********
2014-12-10 11:53:48:003 788 130b8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 3]
2014-12-10 11:53:48:003 788 130b8 Agent *************
2014-12-10 11:53:48:003 788 11930 AU >>## RESUMED ## AU: Search for updates [CallId = {B2623DA3-6D66-4FDB-ADBD-1B1EB04C1926} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-12-10 11:53:48:003 788 11930 AU # 0 updates detected
2014-12-10 11:53:48:003 788 11930 AU #########
2014-12-10 11:53:48:003 788 11930 AU ## END ## AU: Search for updates [CallId = {B2623DA3-6D66-4FDB-ADBD-1B1EB04C1926} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-12-10 11:53:48:003 788 11930 AU #############
2014-12-10 11:53:48:003 788 11930 AU All AU searches complete.
2014-12-10 11:53:48:003 788 11930 AU AU setting next detection timeout to 2014-12-10 21:51:55
2014-12-10 11:53:48:003 788 11930 AU Adding timer:
2014-12-10 11:53:48:003 788 11930 AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2014-12-10 21:51:55, not idle-only, not network-only
2014-12-10 11:53:48:003 788 11930 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-10 11:53:48:003 788 11930 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-10 11:53:48:003 788 130b8 IdleTmr WU operation (CSearchCall::Init ID 3, operation # 33) stopped; does use network; is not at background priority
2014-12-10 11:53:48:003 788 130b8 IdleTmr Decremented idle timer priority operation counter to 1
2014-12-10 11:53:53:011 788 3598 Report REPORT EVENT: {1452444F-3163-41E2-B425-A03894C3C1DE} 2014-12-10 11:53:48:003-0800 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdatesWuApp Success Software Synchronization Windows Update Client successfully detected 0 updates.
2014-12-10 11:53:53:011 788 3598 Report REPORT EVENT: {DEDB86FA-5126-4D27-BEAA-D57A9375269E} 2014-12-10 11:53:48:003-0800 1 156 [AGENT_STATUS_30] 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdatesWuApp Success Pre-Deployment Check Reporting client status.
2014-12-10 11:53:53:011 788 3598 Report CWERReporter finished handling 2 events. (00000000)
2014-12-10 11:54:38:042 788 3598 EP Got WSUS Client/Server URL: "http://<wsus_server>:8530/ClientWebService/client.asmx"
2014-12-10 11:54:38:074 788 3598 EP Got WSUS Reporting URL: "http://<wsus_server>:8530/ReportingWebService/ReportingWebService.asmx"
2014-12-10 11:54:38:074 788 3598 Report OpenReportingWebServiceConnection, reporting URL = http://<wsus_server>:8530/ReportingWebService/ReportingWebService.asmx
2014-12-10 11:54:38:074 788 3598 IdleTmr WU operation (CLegacyEventUploader::HandleEvents) started; operation # 41; does use network; is at background priority
2014-12-10 11:54:38:074 788 3598 Report Uploading 6 events using cached cookie.
2014-12-10 11:54:38:089 788 3598 Report Reporter successfully uploaded 6 events.
2014-12-10 11:54:38:089 788 3598 IdleTmr WU operation (CLegacyEventUploader::HandleEvents, operation # 41) stopped; does use network; is at background priority -
Address book card not updating from LDAP on server
I am running 10.5.6 on a MacBook and connecting to a 10.5.6 server. If I search the LDAP directory in Address Book and add a found card to my Address Book, it should update automatically with any changes - the box is ticked in the LDAP Preferences in Address Book.
The thing is, updates are not happening. I can connect to the server and searches come up with the information I want, but cards previously dragged to the Address Book from an earlier search never get updated.
Any ideas, anyone?Hi,
If a new OAB is set as default, please check whether the OAB folder in the following path is the latest date in Exchange sever:
a. OAB generated in Mailbox:
\\Program Files\Microsoft\Exchange Server\ ExchangeOAB
b. OAB distribution in Client Access:
\\Program Files\Microsoft\Exchange Server\ClientAccess\OAB
If the OAB file is not generated, please collect any event logs in Mailbox server and provide your OAB virtual directory information for more troubleshooting. If the files in both of two folders are latest,
we can try the following steps in Outlook to download Offline Address Book:
1. Delete the *.oab files in the following folders in local machine:
\Users\<username>\AppData\Local\Microsoft\Outlook\Offline Address Books
2. Create a new Outlook profile that uses Cached Exchange Mode.
3. Start Outlook 2010 with this new profile.
4. In the ribbon click Send / Receive, click
Send/Receive Groups and then click Download Address Book.
For more information about OAB downloading and updating, please refer to Q5 to Q20 in:
http://support.microsoft.com/kb/841273/en-us
Regards,
If you have any feedback for TechNet Subscriber Support, contact
[email protected]
Winnie Liang
TechNet Community Support -
Testing updates with a new WSUS server
We recently created a new WSUS server and added a test target group consisting of 6 test PCs. My question is if I approve updates tonight to just the target group, will I be able to push out those same updates to our staff PCs next Thursday? (We typically
approve updates on the 4th Thursday of the month for a 3:00am Friday install via our WSUS GPO.) Or will the staff PCs miss out on this month's updates due to the test push? I.e.: is it "one and done" with the approved updates.
Thanks
Hank VareA couple of thoughts to share....
First, with respect to your approvals. This is exactly why target groups exist. So if today (Thursday) you approve updates for the target group, then the computers in that target group will get these updates sometime over the next 24-48 hours (depending
on a lot of variables that affect the process from the time of approval to the time of installation). When you're ready to deploy them to more systems, you just ADD the approvals for the extra target group(s) that contain the additional systems.
Second... approving updates on Thursday for a 3am Friday installation is a procedure likely doomed to some percentage of failure. In fact, if you've already been doing this I'm surprised it hasn't already happened. So let's dive into some of those "variables"
I mentioned in the first paragraph and better understand the risks.
When you approve the updates, they have to be downloaded from Microsoft. That takes some amount of time.
AFTER the updates are downloaded from Microsoft, the client has to "check in" with the WSUS Server to see if there are any new/available updates to download. That "check in" could occur at anytime up to 22 hours AFTER the updates have
been downloaded (which, right here, already blows the 3am target).
When the client has discovered available update to download, then it actually has to download them AND the download has to complete before 3am Friday, or those updates will not be scheduled for installation at your weekly event.
NOW.. having said that, introducing a TEST GROUP may actually mitigate some of that risk -- unless your test group is also scheduled to install updates ONLY on Friday at 3am, in which case, some of your test group might not get any updates at all.
As a general rule, your initial approval of an update should be at least 48 hours in advance of the time in which you want the clients to actually install the updates. This gives the WSUS server several hours to download the updates, it accounts for the
up-to-22-hours that may lapse before the client discovers the updates as available, and it gives the client several hours to download the updates from the WSUS server, so they are on the local machine prior to the scheduled installation time.
Additionally, if there are downstream/replica servers involved in the environment, you'll need to add another 48 hours for each level of replication -- because replica servers get updates exactly like clients do.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
I setup a new WSUS server and then changed name of old one to something else and then renamed new one what the old one was. None of the clients are connecting to new WSUS server even though the GPO should be pointing to correct name. Is there something else
I have to do in order for PCs to sync now?Hi Jason,
Agree with Daniel.
Besides, do you install the WSUS on Windows Server 2012 R2? If yes, have you change the port in the GPO? WSUS server has changed the default port in Windows Server 2012R2.
On WSUS 3.2 and earlier, port 80 for HTTP and 443 for HTTPS
On WSUS 6.2 and later (at least Windows Server 2012), port 8530 for HTTP and 8531 for HTTPS
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Clients cannot update from WSUS server - error 8024400E
Alright, so I'm troubleshooting our WSUS server and seem to be stuck. I am running WSUS 3.2.7600.226 on Server 2003. The client I have been using for testing is Windows 7 x64, but we have this issue on all clients (XP, 7 x86, and 7 x64). I started
with an error of 800B0001 and after googling installed KB2720211 to fix it. Now I am getting error 8024400E on clients when I attempt to update. I followed a technet walkthrough and verified that my WSUS settings are all correct (at least regarding iis,
registry, gpo settings, and file system permissions). I am able to download CAB files from the WSUS server by going to the proper address in a browser. Here is a snippet from my WindowsUpdate log on my client:
2013-12-20 10:27:29:784 972 23ac AU #############
2013-12-20 10:27:29:784 972 23ac AU ## START ## AU: Search for updates
2013-12-20 10:27:29:784 972 23ac AU #########
2013-12-20 10:27:29:785 972 23ac AU <<## SUBMITTED ## AU: Search for updates [CallId = {749E5CD5-F4DE-48FC-A691-3610EF622CE3}]
2013-12-20 10:27:29:785 972 2bcc Agent *************
2013-12-20 10:27:29:785 972 2bcc Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-12-20 10:27:29:785 972 2bcc Agent *********
2013-12-20 10:27:29:785 972 2bcc Agent * Online = Yes; Ignore download priority = No
2013-12-20 10:27:29:785 972 2bcc Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation'
and RebootRequired=1"
2013-12-20 10:27:29:785 972 2bcc Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-12-20 10:27:29:785 972 2bcc Agent * Search Scope = {Machine}
2013-12-20 10:27:29:785 972 2bcc Setup Checking for agent SelfUpdate
2013-12-20 10:27:29:785 972 2bcc Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2013-12-20 10:27:29:785 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-12-20 10:27:29:789 972 2bcc Misc Microsoft signed: Yes
2013-12-20 10:27:29:794 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-12-20 10:27:29:797 972 2bcc Misc Microsoft signed: Yes
2013-12-20 10:27:29:799 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-12-20 10:27:29:803 972 2bcc Misc Microsoft signed: Yes
2013-12-20 10:27:29:808 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-12-20 10:27:29:812 972 2bcc Misc Microsoft signed: Yes
2013-12-20 10:27:29:821 972 2bcc Setup Determining whether a new setup handler needs to be downloaded
2013-12-20 10:27:29:821 972 2bcc Setup SelfUpdate handler is not found. It will be downloaded
2013-12-20 10:27:29:821 972 2bcc Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-12-20 10:27:29:823 972 2bcc Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-12-20 10:27:29:823 972 2bcc Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-12-20 10:27:29:835 972 2bcc Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-12-20 10:27:29:835 972 2bcc Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-12-20 10:27:29:852 972 2bcc Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-12-20 10:27:29:852 972 2bcc Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-12-20 10:27:29:884 972 2bcc PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-12-20 10:27:29:884 972 2bcc PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsusservername/ClientWebService/client.asmx
2013-12-20 10:27:29:896 972 2bcc PT WARNING: Cached cookie has expired or new PID is available
2013-12-20 10:27:29:896 972 2bcc PT Initializing simple targeting cookie, clientId = 488f3922-1a4e-4921-b015-25957eeb6500, target group = http://wsusservername, DNS name = mycomputer.domain.local
2013-12-20 10:27:29:896 972 2bcc PT Server URL = http://wsusservername/SimpleAuthWebService/SimpleAuth.asmx
2013-12-20 10:27:29:902 972 2bcc PT WARNING: GetAuthorizationCookie failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200
2013-12-20 10:27:29:902 972 2bcc PT WARNING: SOAP Fault: 0x000190
2013-12-20 10:27:29:902 972 2bcc PT WARNING: faultstring:Fault occurred
2013-12-20 10:27:29:902 972 2bcc PT WARNING: ErrorCode:InternalServerError(5)
2013-12-20 10:27:29:902 972 2bcc PT WARNING: Message:(null)
2013-12-20 10:27:29:902 972 2bcc PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/SimpleAuthWebService/GetAuthorizationCookie";
2013-12-20 10:27:29:902 972 2bcc PT WARNING: ID:9d989bf6-04e3-44a9-8ffd-f20bb997b3f0
2013-12-20 10:27:29:902 972 2bcc PT WARNING: Failed to initialize Simple Targeting Cookie: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc PT WARNING: PopulateAuthCookies failed: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc PT WARNING: RefreshCookie failed: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc PT WARNING: RefreshPTState failed: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc PT WARNING: Sync of Updates: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc PT WARNING: SyncServerUpdatesInternal failed: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc Agent * WARNING: Failed to synchronize, error = 0x8024400E
2013-12-20 10:27:29:902 972 2bcc Agent * WARNING: Exit code = 0x8024400E
2013-12-20 10:27:29:902 972 2bcc Agent *********
2013-12-20 10:27:29:902 972 2bcc Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-12-20 10:27:29:902 972 2bcc Agent *************
2013-12-20 10:27:29:902 972 2bcc Agent WARNING: WU client failed Searching for update with error 0x8024400e
2013-12-20 10:27:29:902 972 1bc8 AU >>## RESUMED ## AU: Search for updates [CallId = {749E5CD5-F4DE-48FC-A691-3610EF622CE3}]
2013-12-20 10:27:29:902 972 1bc8 AU # WARNING: Search callback failed, result = 0x8024400E
2013-12-20 10:27:29:902 972 1bc8 AU # WARNING: Failed to find updates with error code 8024400E
2013-12-20 10:27:29:902 972 1bc8 AU #########
2013-12-20 10:27:29:902 972 1bc8 AU ## END ## AU: Search for updates [CallId = {749E5CD5-F4DE-48FC-A691-3610EF622CE3}]
2013-12-20 10:27:29:902 972 1bc8 AU #############
2013-12-20 10:27:29:903 972 1bc8 AU Successfully wrote event for AU health state:0
2013-12-20 10:27:29:903 972 1bc8 AU AU setting next detection timeout to 2013-12-20 21:27:29
2013-12-20 10:27:29:903 972 1bc8 AU Setting AU scheduled install time to 2013-12-21 10:00:00
2013-12-20 10:27:29:903 972 1bc8 AU Successfully wrote event for AU health state:0
2013-12-20 10:27:29:904 972 1bc8 AU Successfully wrote event for AU health state:0
2013-12-20 10:27:34:498 972 2bcc Report REPORT EVENT: {2519DC64-E7F9-499B-A2F8-B58DA4A0C08A} 2013-12-20 10:27:29:902-0600 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed
to detect with error 0x8024400e.
2013-12-20 10:27:34:502 972 2bcc Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2013-12-20 10:27:34:502 972 2bcc Report WER Report sent: 7.6.7600.256 0x8024400e 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2013-12-20 10:27:34:502 972 2bcc Report CWERReporter finishing event handling. (00000000)
I focused in on "GetAuthorizationCookie failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200" and did some googling which all points at Microsoft Office 2003 SP1 update as being the culprit, and I followed
the instructions on a technet site to disable the update and am still getting the same error. I'm stumped at this point, and I thought I would post here in the hope that someone can help me before I end up just wiping it out and reinstalling (which I'm worried
won't even solve it).I focused in on "GetAuthorizationCookie failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200" and did some googling which all points at Microsoft Office 2003 SP1 update as being the culprit, and I followed
the instructions on a technet site to disable the update and am still getting the same error.
While you're definitely on the right track, the Office2003SP1 update really has not been an issue since WSUS Service Pack 2 was released in October 2009 (and really, the Office2003SP1 update that was the cause of this was replaced long before that even,
so you probably don't even have the defective update on your server).
However, the error is generally associated with the presence of defective update(s) on the WSUS server, so the first thing to do is address any potential issues caused by a failed install of KB2720211.
If the error still persists after verifying that all other aspects of the server are fully operational, review the list of not-Declined updates on your WSUS server and make sure that:
All Expired updates are Declined (and then run the Server Cleanup Wizard and let it delete the expired updates).
All approvals for older revisions have been removed (and then run the Server Cleanup Wizard and let it delete the older revisions).
All approvals for superseded updates have been removed. (And then, when they report as 100% Not Applicable, decline them, and then run the Server Cleanup Wizard so that it can delete the files associated with those updates).
Once all of the potentially problematic updates have been removed from the view of the Windows Update Agent, and if this error then persists, we can evaluate it from a more focused perspective.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Export Approuved Update from old server WSUS to the new WSUS server
Hello,
I want to export all update approuved from one old WSUS server to one new WSUS server
Can you help me please ?
Best RegardHi,
>>I want to export all update approuved from one old WSUS server to one new WSUS server ?
There are three steps to exporting and then importing updates:
Make sure that the options for express installation files and update languages on the exporting server are compatible with the settings on the importing server. This ensures that you collect the updates you intend to distribute.
Copy updates from the file system of the export server to the file system of the import server.
Export update metadata from the database on the export server, and import it into the database on the import server. The last section explains how to import exported updates to a replica server
Here is the official solution:
https://technet.microsoft.com/en-us/library/cc720486(v=ws.10).aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
FCS Not Updating from WSUS / Cannot open MOM Console / Cannot connect to MOM DB
Hi,
My original problem was that FCS was not updating from WSUS. Then after reading up, and trying a whole lot of different things I managed to break it further. Now I cannot open the Microsoft Forefront Client Security Console on the management server, The
Administrator Console and the Operator Console cannot connect to the Management server (They are on the management server)
As a side note: The reporting hasn't worked at all, not even after the last Systems Admin reloaded the whole FCS implementation.
I need assistance to get everything working again, and I think it might take a while to get everything resolved.
I don't know what information to provide so here is some to start with:
I believe this is a on server topology:
1. There is the management server, with all the roles except the "distribution" role installed.
2. The updates to FCS are set to go through our WSUS server.
3. The WSUS server works fine in all regards except to push the FCS updates through (I release other MS updates every week and they all go through)
4. Management server is 32-bit Windows Server 2008 Standard with SP1, with Microsoft Operations Manager 2005 (Unsure of SP1 is installed, but I think it is), and Microsoft SQL Server 2005 (It doesn't have the SQL Studio thing)
5. I have domain admin credentials
6. When opening the Microsoft Forefront Client Security console it crashes with a "MMC has detected an error in a snap-in and will unload it". Clicking on ok gives a new error page of exception: "System.Reflection.TargetInvocationException"
7. Opening the Operator console give a message of "Error connecting to server" and clicking on ok brings up the console settings where you specify the MOM management server etc
8. Opening the Administrator conolse immediately brings up the "Connect to a different MOM Management Server" window.
I am hoping that someone here can ask the right questions and helped get through all these issues to get this system working againThanks Quan and Faron for your replies. Firstly, when I logged into the server today and tried to open the consoles, the FCS console did not give me an error. Before I originally posted my message I already downloaded and tried that hotfix. The problem is
there is no SQL Management Studio. Microsoft SQL Server 2005 is installed.
The only error that really stands out is this one under the application logs:
Source: Microsoft Operations Manager
Event ID: 20607
The Data Access Server (DAS) on computer SSCIS04 returned an error. System error code: -2147217770 System error text: IDispatch error #3222 DAS method called: ConfigurationGetOnePointFreeSpace Called from file: d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp
Called from line: 984 Other than that there are some terminal server printer errors and print spooler errors (which are common on pretty much all our servers), and Heartbeat errors (Event ID: 21213: Heartbeat update failed for 1 or fewer agents. Error details:
IDispatch error #3222)
I have just checked again and the FCS console is still opening without error. And I can start a scan. (No clients report back to the server though) -
New WSUS server not showing computers correctly.
Hi All,
I've recently migrated WSUS servers and everything has come intact apart from the grouping. The groups have come over but all the computers are showing under 'Unassigned Computers'.
I've manually removed and added a number of computers but it doesn't show any computers.
ThanksHi,
I've only just taken over setting up of WSUS from my colleagues and he's setup computer groups in WSUS and adds the computers to the groups via Active Directory Users and Computers.
The WSUS GPO only sets
Allow non-administrators to recieve update notifications
Allow signed updates from an intranet Microsoft update service location
Configure Automatic updates (Configure automatic updating, Scheduled install day, scheduled install time)
Enabling Windows Update Power Management to automatically wake up the system to install scheduled updates
Specify intranet Microsoft update services location (Set the intranet service for detecting updates, set the intranet statistics server)
Turn on recommended updates via Automatic Updates
Turn on Software Notifications.
Not sure how much help that is!
Well, that is your issue then, if you are using client side targeting with the WSUS Server you will need to place the WSUS Group in the Group Policy. Here is a good technet article to get you started.
http://technet.microsoft.com/en-us/library/cc708574(WS.10).aspx
Hope this helps. -
Lync 2013 Photos will not update from AD
I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs; Replicate this attribute to the Global
Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
"Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"
and finally we are setting the photo in ad using:
"Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
but unfortunately no change on my Client. I still see these users original photos.
Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
More info on the environment:
4 main sites + remote users
~7DC's - 2003 DFL (1 at each site + a few at HQ)
3 Lync Front end servers (2013) (All located at central HQ)
2 Lync edge server (2013) (All located at central HQ)
1 - 2010 Exchange server (Located at central HQ)
2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
About 100 HP 4110 Lync Edition Desk phones
Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise -
Delta records not updating from DSO to CUBE in BI 7
Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
JaiHi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube? -
Login settings will not update the local testing server files
When uploading to web server from local testing server, changing login settings in the control panel does not update the local testing server Restrict Access to page files. Causing login on website not to function.
It does however update the Connections file and the login wizard form.
What is the best way to change login settings before uploading site to web server?
Thanks
DanDan - I am having the same exact problem. I'm using the restrict access and user registration and login - when attempting to use the Update Record wizard to allow users to change their password or email address, it doesn't change the record.
-
IPad 2 will not update from version 4.3.5 (8L1).
I got an iPad 2 from work and it will not update from version 4.3.5. There isn't even a software update option in settings. I have reset and erased it a few times, and still no update option. I have plugged it into my computer to try to update it that way and every time iTunes prompts me to download and update the latest version, it loads for a few seconds and then I get an iTunes message that says "The IPad software update server could not be contacted. Make sure your network settings are correct and your newtwork connection is active, or try again later." the network connection IS active, I can use safari, and I have "tried again later" and still no update. PLEASE HELP!
Naalamc wrote:
It's an ASUS, Windows 8, Version 11.1.3.8
Thank you.
Your iPad has iOS 4... See Here > http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch -
Standar cost and product cost collector not updating the new price
Hi,
Created Standard cost estimate for one FG product and runned the product cost collector. Based on that consumption delivery everthing is made. Later on the work center and activity type changed in routing. Now i am trying to run the standard cost with new activity price (due to work center change) for the current period, system is showing only the previous rate(previous period) and it is not updating the new price becuase of already we have created the product cost collector.
Can any one give the suggestion for how to update the new price in standard cost as well as new price updation in product cost collector.
govind.Hi
1. If the original cost estimate was run in the current month - Then you cant re-release cost estimate unless you reverse it from CKR1
If the cost estimate was of previous months - then you can definetely release it again
2. In cost collector, you need to manually cost it again using the Preliminary costing feature... Your cost coll will then show 2 cost estimates i.e. One from Original date to current date-1, and 2nd from Current date to 31.12.9999
br, Ajay M
Maybe you are looking for
-
AVI clips export (Fehlermeldung: "[..\..\Src\Win\WinFile.cpp-759]") Premiere friert ein beim export
The following problem: I have 2 adobe premiere project. both have the same film and film length but different video codecs. 1. project (low quality video codecs (mpeg4) export works fine 2. project (high quality video codecs (avi) export stops every
-
HELP Itunes wont launch after upgrading
I downloaded the latest Itunes, and then tried to launch it. I keep getting the following message "error getting file security :\C\program files\get last error 5 I have even tried to remove I tunes through the add & remove section in the control pane
-
Record limit in REUSE_ALV_GRID_DISPLAY
I have a ALV report program that displays an internal table with about 5000 records. When the user either selects 1-n lines on the ALV screen (or none at all) and then clicks a Details button I fill another internal table with the details that I want
-
DOES PODSHARE WORK FOR MY DILEMMA???
Here is my situation, and if one of you intellectuals can tell me the best way to handle this. I heard that Podshare might be the best way, but who knows. Your input is appreciated 1. I set up my Itunes at my work computer which is a dell and operate
-
Blackberry 8530 battery draining OS 6
Today my phone started to die very quickly. Within 6 hours, it went from fully charged to dead. I had only used to send an email, check the time, and send a few text messages. I normally can go at least 1.5 days without the battery dying. I stopp