_clientsetup_$ - Looping install of wse2012 r2 clint connector on windows 8.1 pro with media

This was first posted on the win 8.1 forums.
Have a laptop computer I was trying to connet to a wse 2012 r2 evaluation trial.
Having set up the server, I loaded the connection software on to the laptop,  HP G6. This machine has been connected to a windows home server 2011, during the install the reboot has got in to a loop, using "_clintsetup_$ as the user id, and the
error message - "The User Profile Service  service failed the sign-in" / User profile cannot be loaded.
Have tried to restore but the clientsetup id is auto-logon and can not get to admin to do a restore.
Have tried to get in to safe mode no way to do so. (have tried the usual tricks from win7 but this not working ie f5 / f8  even stopping the boot process by pressing power switch  to get windows to think it has failed during start up.
Any Ideas.

Hi Peter,
Based on your description, I’m a little confused with this issue. Before going further, would you please let
me confirm something more?
Please let me confirm if the client computer was Windows 8.1?
You descript “This machine has been connected to a windows home server 2011,”. I just understand that you join the client computer to Windows Server 2012 R2 Essentials via
connector software. Based on this sentence, did you mean the computer was connected to WHS 2011 before connecting to server 2012 r2 essentials? Or anything I misunderstand? Please don’t hesitate to let me know.
Please check if you can open a command prompt at boot. Then enable the built-in Administrator, restart the
PC, and sign in via Administrator. Meanwhile, please refer to the following KB and check if can help you to solve this issue.
You receive a "The User Profile Service failed the logon”
error message
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

  • How to Install Windows 8.1 Pro with Bootcamp

    I have an early 2011 MBP 15" that's running Mavericks, and I just got Windows 8.1 Pro with an install disc. I'd like to install W8 with Bootcamp, but I can't seem to find any guides on doing this, as most people have retina MBPs which have no optical drive (bad design choice, IMO), so they utilize a flash drive. How would I go about doing this properly?

    Welcome to Apple Support Communities
    With a disc it's much easier to install Windows 8.1 on your MacBook, because the steps are the same as for any other Windows version.
    Boot Camp Assistant (in /Applications/Utilities) will guide you through the first steps. Then, follow Apple's steps to install Windows 8.1 > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

  • I purchased the Adobe Photoshop Elements 10 about 6 months ago. I want to install it to my new computer which is a Macbook Pro with no CD Drive. How do I do this?

    I purchased the Adobe Photoshop Elements 10 about 6 months ago. I want to install it to my new computer which is a Macbook Pro with no CD Drive. How do I install it when I got it in CD form?

    I doubt the license is affecting the performance - it might be a case of the software being too old for the machine.
    In any case, you can contact Adobe support thru chat and have them reset your activation count to eliminatre your doubts regarding the license.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • How can I install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8

    Is it possible to install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8?

    Is it possible to install my selphy photo printer CP780 on a new MacBook Pro with operating system 10.8?

  • Windows Update in Endless Loop of 'Installing updates" and "Undoing changes" on New Windows 8.1 Pro Install

    I am setting new Windows 8.1 Pro computers, and am installing Windows 8.1 Pro to bare drives.  Everything goes fine until Windows Update starts installing updates, and then the computer goes for hours installing updates, and then "We
    could not complete the updates Undoing changes".   It's an endless loop. It seems to be the same 38 updates.  This is a recent phenomenon.  I have not run into this until the last week or two on several new computer installs.
    Again these are brand new installs, so something is clearly wrong with the Windows updates.
    If anyone can please tell me how to avoid this, it would be much appreciated.
    Michael

    Hi Michael,
    "  This is a recent phenomenon"
    Have you made any modifications to the machines ?
    To resolve this issue ,running the built-in troubleshoot tool is a very good beginning .It will automatically diagnostic the windows update components and check the configurations for us .
     Control Panel\All Control Panel Items\Troubleshooting\Fix problems with Windows Update
    If there are antivirus software installed in these machines, please turn off them temporarily to have a check.
    The command line included in the link as S.Sengupta posted is very useful and convenient to repair the windows corrupted files .We can have a try .
    "sfc /scannow" ,"DISM.EXE /online /cleanup-image /restorehealth "
    We also can check the windowsupdate.log for more information to troubleshoot this issue .
     Run "windowsupdate.log"
    If you have trouble in analyzing the log ,please upload them to the OneDrive and paste the link here .
    Best regards

  • Hi,  i installed an upgrade for itunes on my windows computer it came with a error message of msvcr80.dll

    Hi 
    I installed a upgrade of itunes on my windows computer
    It came up with error message of msvcr80.dll     I went to repair and to reinstall itunes   but this didnt fix it
    Please help me

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I had tried installing windows 8.1 pro with many different solutions like using Bootcamp or using gdisk part and upgrading the disk part from hybrid to EFI also tried Using Lenevo external Optical drive which doesnt worked my internal drive is damage

    I Am fed up after getting error after errors on the installation of windows 8.1 in my late 2011 MBP 15" 750 GB HDD and OSX Yosemite 10.10.2 and i am trying to install windows 8 or 7 and the error doent go away also i tried various other methods like gdisk part to make next button appear and Afte next button appear i am getting the error after the check list is done
    please someone help me out i am getting paranoid in this and i am going to be a threat to society because its making me insane.

    1. You cannot use the Lenovo external drive, because you already have a built-in SuperDrive. Get your internal drive fixed.
    2. Your Mac does not support EFI Boot, because it is a PreUEFI model based on How to identify MacBook Pro models - Apple Support and the following list. If you force it with EFI boot, some of your hardware GPU/Audio will not work properly.

  • Serialized install of Presenter 10 32-bit on Windows 7 64-bit with Office 2013 32-bit fails

    I used Creative Cloud Packager to create a serialized install of Presenter 10 32-bit for use on Windows 7 64-bit that have Office 2013 32-bit installed. The package created fine, but when I run the setup.exe that CPP generated, the progress bar moves along then undoes the changes and finishes. The Presenter didn't actually install and I get no messages about why it has failed.
    Is there any way I can determine what is causing the failure?
    I have manually run the full installer and it does work as it should. The problem is only when I create the serialized installation with the CCP.

    Hi There,
    If you have Office 32 bit, and OS 64 bit then you need to add Presenter 32 bit media as "Offline Media" . 
    Please find the below steps to create a package for Pn 32 bit and OS 64 bit :
    Launch CCP.
    Click on Create package and click Next.
    Give the name of the package , location to save it , License type as "Serial Number License" , Select "32- bit Package if your OS is 32 bit or select 64- bit Package if you OS is 64 bit" .
    Click Next and Enter the serial Key for Presenter 10. Click Next.
    Click "Offline Media" .
    Click on Browse .
    Browse to Presenter 10 Installer and select "PresenterWin32" and click Ok.
    Click on Extract.
    Select Presenter 10 and click Done.
    Click on Build .
    Regards,
    Mayank

  • I can't install Visual Studio 2013 Ultimate in my Windows 8.1 Pro

    Good Day Everyone!
    I have downloaded an ISO file of VS2013 installer from Microsoft Download Center. I have checked the requirements and I have what it needs to be installed. But when I mount the ISO disc image, an error message appear. 
    G:\
    Application not found.
    I also tried to run it from the inside and another error shows.
    Visual Studio 2013 Ultimate has stopped.
    I have the ISO file checked and it matches the CRC and SHA1 posted from the download center. I also have .net frameworks 3.5 and 4.0 installed in my laptop.
    I don't know what else to do. Please help. Thanks

    Hi,
    Base on your question, please follow these steps to check the result:
    1.Update your windows and disable Anti-Virus software, then reboot your system.
    2.Clear your %temp% folder.
    3.Run the setup file as administrator.
    4.If the installation fails, please use http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
    https://skydrive.live.com/ and share the link here.
    If it doesn't work,we suggest you burn the image to Disc ,and install
    Visual Studio 2013 Ultimate by DVD.
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Installed RoboHelp 11 for trial and it overwrote Acrobat 9 pro with broken version of Acrobat 11 which I can't uninstall.

    The subject says it all. I installed Robohelp 11 to try it. Without my permission, the installation nuked my perfectly functional Acrobat 9.0 Pro and replaced it with a completely broken of Acrobat 11, which I neither wanted nor needed. I went to control panel to get rid of it so I could re-install Acrobat 9 Pro, and Acrobat 11 doesn't even appear as an application that can be uninstalled. Yes, the installation is that broken. So now I can't work with PDFs at all. I am more than happy to uninstall the trial of Robohelp to get back Acrobat, but I'm not even sure that will fix the issue since the installation program seems so squirrely. Anyone else had this problem. If so, how did you resolve it? Thanks for any help anyone can offer!

    Thanks for your reply. As I mentioned in my post, when I went to Control Panel to uninstall Acrobat 11.0, it wasn't listed among currently installed apps. However, after going back and looking through the Installed On dates in Control Panel, I realized that for some reason, it's called Adobe PFD Creation Add-on XI, rather than Acrobat 11.0. Interestingly, the program folder name in Windows Explorer still uses Acrobat 11.0.
    Fortunately for me, I always have disc versions of my software. So I was able to re-install Acrobat 9.0 once I got rid of Adobe PDF Creation Add-on XI. I really wish that Adobe made clearer what extras they are installing with these trial versions :-(
    Thanks again.

  • Step by step guidence for installing Windows 8.1 Professional with Media Center upgrade on warranty replcement notebook

    we have purchased lenovo laptop which is already having windows 8.1 single licence.so we have purchased up gradation pack and the we have used the key and the laptop operating system has been converted to windows 8.1 professional with media centre but
    now the laptops are having some problem so we are going to send back the laptop to lenovo and replaced the same to another model of lenovo with same windows 8.1 single licence.and now i want to use the previous key (the upgradation pack) for the new laptop
    .please suggest me how to do the same .

    Hello siba11111,
    About the license issue, it is recommended to contact the local support or the Phone support.
    For more information, please take a look at the following KB.
    http://support.microsoft.com/kb/950929
    Best regards,
    Fangzhou CHEN
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • S400U - Install windows 8.1 PRO

    Hi guys!
    I have an Ideapad S400U, I5, 4GB of Ram, 500GB HD and 32GB SSD. I love this machine, but...
    I'm having the following problem: Im a software developer and one of the tools I use only works in windows 8.1 PRO.
    The only option I have is to upgrade the original windows (windows 8 single language) to windows 8.1 PRO. I purchased a license and a serial number of win 8.1 pro, but it doesn't worked with the "Add windows resources" options, witch upgrade OS without formating.
    I wasted 2 weeks searching for a tutorial of how to install (or to do a fresh installation) windows 8.1 pro in this machine using the ssd.
    I know how to format machines without ssd drives, but I'm concerned that I coud fail and lose the performance and boot speed provided by the ssd.
    I tried everything, google, forums and even call the support (that doesn't know how to format their own ultrabooks).
    Please, if someone knows how to do that, or know some tutorial, PLEASE send me here.
    Sorry for my despair.

    hi altairlage,
    Welcome to Lenovo Community Forums!
    What you'll have to do is to use your Windows 8.1 Pro Installer and Install it Directly to the 500GB HDD.
    After OS Installation
        Download and install this Software to Mount the SSd again for Caching 
    ExpressCache Software 
    expresscache_x64_110.exe
    9.8 MB
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Windows 8.1 Pro Workstations - Not Getting "Install Updates and Shut Down" notification for new updates

    We've got a small handful of Windows 8.1 Pro workstations on our domain (SBS 2008).
    The workstations show up in the WSUS Console list along with the details of how many updates need to be installed.
    On the Windows 8.1 Pro workstations, at the logon screen they display "Important Updates Are Available. Go to PC Settings to install them".  If we go to PC Settings or Windows Updates via Control Panel the updates show as awaiting installation.
    However, we can't rely on users to go into PC Settings or Control Panel to install Windows Updates. We need them to be installed as per Windows 7 and Windows XP - whereby when the user shuts down their workstations it displays the message "Install Updates
    and Shutdown".
    Currently the Windows 8.1 Pro workstations do not show this - if you choose to shut down there are no update installation messages and the workstations simply shut down.
    Has anyone else encountered this? What needs to be done?
    Thanks in advance.
    I don't work for Microsoft - I just use their products.

    It does sound weird yes.
    Id like to try and mirror your setup in my lab.
    What settings do you have in your WSUS GPO?
    Have you seen this, in the 'Configure Automatic Updates' setting?
          On Windows 8 and later, you can set updates to install during automatic maintenance instead of a specific schedule. Automatic maintenance will install updates when the computer is not in use, and avoid doing so when the computer
    is running on battery power. If automatic maintenance is unable to install updates for 2 days, Windows Update will install updates right away. Users will then be notified about an upcoming restart, and that restart will only take place if there is no potential
    for accidental data loss.
            Automatic maintenance can be further configured by using Group Policy settings here: Computer Configuration->Administrative Templates->Windows Components->Maintenance Scheduler
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • How to install Elements8 (on disc) on new Mac Book Pro with no disc drive?

    How can I install Elements 8 (on disc) on my new Mac Book Pro with no disch drive?

    Copy the contents of the Elements 8 in a pen drive(from a Mac that has the capability) and then copy the contents to your disk(on the new machine i.e. Mac book Pro) and run the installer. If this is not possible you can download the installer directly from here.
    Thanks
    Nikhil

  • I can't install itunes; the update crashed error 7 Windows error 126

    I can't install itunes; the update crashed error 7 Windows error 126
    PC with Windows 7
    I have been using itunes for many years

    I have the same problem as yours too. It always says ''The older version of Apple Software Update cannot be removed. Contact your technical support group''.

Maybe you are looking for