Clinking on the X does not close the Tab

Recently I had to run the Loaris Trojan remover to get rid of something that hijacked my home page and search engine. I also had to reset the Firefox defaults. Somewhere in there I lost the ability to close a Tab by clicking on the X. The X is there but it does no close the Tab when I click on it. The only way I can close Tabs is to completely Exit Firefox and relaunch.
How do I restore closing Tabs?

Did you try the '''safe mode''' option ?
Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Thank you.

Similar Messages

Webi report using openDocument URL,the window does not close..

Hello,
While viewing a Web intelligence report using openDocument URL, the window does not close after clicking on Document -> Close option, and the report remains open.
And if I close the browser, the session of the user in InfoVierw remains opened
Thanks
Environment
Firefox/3.6.15
Internet Explorer 8
BusinessObjects Enterprise XI 3.1
SAP Integratio KIT XI 3.1
SAP BW 7.02

Please check SAP note 1512960 and SAP note 1384496.
http://service.sap.com/notes
This behaviour is by design.
Regards,
Stratos

[svn:fx-trunk] 13136: Fix for FLEXENT-1196 ( Replay of click on NavigatorContent does not close the combobox)

Revision: 13136
Revision: 13136
Author:   [email protected]
Date:     2009-12-21 17:40:28 -0800 (Mon, 21 Dec 2009)
Log Message:
Fix for FLEXENT-1196 (Replay of click on NavigatorContent does not close the combobox)
We need not record OPEN event when it is triggered from a KeyBoard event that types a character. Replaying the type event would automatically open the drop down.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXENT-1196
Modified Paths:
    flex/sdk/trunk/frameworks/projects/automation_spark/src/spark/automation/delegates/compon ents/SparkComboBoxAutomationImpl.as
    flex/sdk/trunk/frameworks/projects/automation_spark/src/spark/automation/delegates/compon ents/supportClasses/SparkDropDownListBaseAutomationImpl.as

HT4414 I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?

I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?

Try posting in the Mountain Lion forum. Here is the link below. This forum is for old software circa 2003.
https://discussions.apple.com/community/mac_os/os_x_mountain_lion

Photoshop does not close files and the program does not quit.

I have been on the phone with tech support for over an hour. Photoshop does not close files and the program does not quit. I am on a Mac and I am using Photoshop CC 2014.

Have you tried uninstalling Photoshop CC and re-installing? Another thing to try is to remove all Photoshop CC plist files. There is also the Cleaner tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

[svn:fx-trunk] 10608: Fix FB-19648: 'Terminate' action during debugging does not close the browser on Mac if path contains spaces

Revision: 10608
Author:   [email protected]
Date:     2009-09-25 16:30:55 -0700 (Fri, 25 Sep 2009)
Log Message:
Fix FB-19648: 'Terminate' action during debugging does not close the browser on Mac if path contains spaces
Ticket Links:
    http://bugs.adobe.com/jira/browse/FB-19648
Modified Paths:
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

Revision: 10608
Author:   [email protected]
Date:     2009-09-25 16:30:55 -0700 (Fri, 25 Sep 2009)
Log Message:
Fix FB-19648: 'Terminate' action during debugging does not close the browser on Mac if path contains spaces
Ticket Links:
    http://bugs.adobe.com/jira/browse/FB-19648
Modified Paths:
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

Excel opens and does not close when using the OI classes for some users...

Hello Experts,
I am using the OI classes(i_oi_container_control, i_oi_error, i_oi_document_proxy, i_oi_spreadsheet) to transfer Excel data to my itab. The problem we are encountering is that for some users the excel automatically opens and does not close. But in my case it is not opening so it is fine in my case. In my code I am already using the 'CLOSE_DOCUMENT' and 'RELEASE_DOCUMENT'.

Viraylab,
Check by any case you set the parameter register_on_close_event of the method init_control? Dont set the parameter as it will look for the corressponding custom code in your program. Also try with the method release_all_documents.
Regards,
Kiran Bobbala

I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?

I downloaded the new version of Mozilla and tried to install an add-on to allow me to set the home page for new tabs. The app says it has downloaded but does not open new tabs as my home page (google) - any suggestions what I can do?

I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!

Why can i not close a tab after i have 2 showing the only why 2 leave that site is 2 exit all tabs and restart firefox

why can i not close a tab i have 2 close all tabs and restart firefox then selet browse this is verry anoying

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Report window does not close properly when using openDocument

XI R2 InfoView
Windows 2003 server
IIS
IE7
We have been experimenting with the use of openDocument and have managed to achieve what we wanted but have one small problem. When the document is retrieved it is opened in a new browser window. When Close is selected from the drop-down Document menu the document is closed but the window shrinks to approx 8.5cm x 6 cm and remains open.
A similar thing happens when we use the Preview button to view a document in the CMC, except in that case the document does not close and closing the browser window leaves a button on the Windows taskbar. There doesn't appear to be a related window as it cannot be restored but you have to right click and select Close to get rid of it.
Any ideas what is causing these problems and how we can get round them?

Anne,
There are some parameters in opendocument (for ex. sWindow) that can help control certain things, have you tried employing anything like that? What I find frustrating is the behavior of opendocument based on whether you're running Infoview or WebI -- each product, using the same exact opendocument syntax yields different results. Based on the sample code below, what I'm seeing with Infoview is the same browser instance is used for calling the child report, however, in WebI, a new browser instance is started and the child report is rendered in Infoview. In my case, when running within WebI and getting a new browser instance in Infoview, and then using the "Document", "close" workflow, the second instance is exiting and I'm back to the previous browser. Staying within Infoview entirely through the process, when closing the child report I get brought back to the folder list page. Who's to know?
="<a href=https://<server>/businessobjects/enterprise115/InfoView/scripts/opendocument.aspx?
idocid=100798&lsSInput_Pos_Nbr="+[Position Number Tracking]+">"+[Position Number Tracking]
+"</a>"
(double spaced on purpose)
Thanks,
John

TestStatnd operatore Interface does not close properly

Hi
I am using LabVIEW 8.2 and TestStand 3.5. I use the default Operatore Interface (full featured) provided by NI. The TestExec.exe does not close properly when I exit the application. Everytime the process is running in windows. I had to use Windows Task Manager to kill the TestExec.exe manaully.
Is there a fix for this?
Thx
Abdulla

Hi,
Do you start any new executions either from within your sequences or from within a step that you are not closing properly?
Regards
Ray Farmer
Regards
Ray Farmer

Download Window Does Not Close Upon Completion of Download

I download a file, the Download Window opens, and asks where I want the file (I set that Tool-Option), but when it is done, the window does not close, even though the Option is set telling it to close when the download is complete
== This happened ==
Every time Firefox opened
== prior to last update

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can try to reset the preferences to see if that helps.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Mail window does not close anymore

When I press the red dot or type CMD-W, the mail window does not close anymore. It just stays open, everything else works as usual. Any ideas, how to close the window again?
TIA

Look at the bottom frame of the Mail window; it may display a small dot thingie in the middle of its bar, something like this -
If so, try clicking on that dot and dragging upward.
If that works, you should have both panes present again. You can adjust the size of the window as a whole by dragging the bottom-right corner (where the hash marks are).

Workflow 2.6.4.0.0 configuration problem - Command window does not close

I am trying to install Oracle Workflow 2.6.4.0.0. as part of Warehouse builder using the details mentioned in this link
http://www.oracle.com/technology/obe/10gr2_owb/owb10gr2_gs/owb/lesson4/etl-mappings.htm
From the Start menu click Programs > Oracle <Database HOME> > Configuration and Migration Tools >
Workflow Configuration Assistant. The Assistant is started.
Accept the default for Install Option
Workflow Account: (Accept the default ) owf_mgr
Workflow Password: owf_mgr
SYS Password : <Enter the SYS account password>
TNS Connect Descriptor: localhost:1521:orcl
Click Submit.
However following this document, the command window did not close, and I did not get any message stating that Workflow Configuration has successfully completed.
The command window displays this message as the final step and does not close-
WorkflowCA: Executing :C:\oracle\product\10.2.0\db_1\jdk\bin\java -jar C:\oracle
\product\10.2.0\db_1\oc4j\j2ee\home\admin.jar ormi://localhost:6041 admin welcome -application WFALSNRSVCApp -testDataSource -location jdbc/WorkflowDS -username OWF_MGR
Is this installation complete? How to resolve this?
Please can any one help?
Thanks very much
Allan

I ran into this problem. And it took me while to get it fixed, but It does work.
First the TNS Desc is misleading. One would think that it would be host:port:sid. What it is really looking for is host:port:servicename. But if you want to use the "Change Tablespace" drop down list you need to, enter the sys password, change it to host:port:sid - Then use the drop list. And change it back before you press submit.
The second thing that I found is that it wants to use the SYSTEM tablespace as temporary tablespace. THis is becuase it is looking for a temp tablespace called TEMP. If you look a the line default_temp = SYSTEM. And if you dont supply a tablespace it wanted to change it in the wfsysgnt.sql script in the $OH\wf\sql directory. You would think that what ever the default database tbs and temp tbs is - that owf would use that. No, it wanted to change it. Oracle needs to fix this.
So here is how i fixed it. I had to create a temporary tablespace called TEMP, does not need to be big as I dropped it after it was done. Then i had to modify the wfinstall.csh script and use the install options. Not the /tablespace this option is obayed but it will try to use the SYSTEM as the temp tbs. Here is my example that I appended:
/wfacct "owf_mgr" /wfpasswd "my_owf_mgr_pwd" /debug "true" /tnsConnDesc "my_host_ip:my_port:my_servicename" /syspasswd "change_on_install" /tablespace "OWF_TBS"

Access DB (& .ldb file) does not close after crystal reports

Post Author: mgold
CA Forum: Crystal Reports
Access DB (& .ldb file) does not close after crystal reports
Hi! We have a VB application using Crystal Reports 6 that has worked successfully on hundreds of systems for over 10 years. Now, on one network, the application and access database does not close. It seems to hang on the [.Close] command.
When we open the application an peruse the screens without opening up a report (using crystal reports), the application and access db closes fine. But as soon as we run a report and then close the report and try to close the application, the access db does not close. Many of the screens open the db and grab data from the access db, but it's only after running crystal reports that we have this problem. (Please see more information below.)
Setup: Application and data (access 97 db) reside on a server in the same folder, but application shortcut is kicked off on client PC. Kicking off the shortcut on the client PC means that the image/process runs on the client PC (not on the server). In this problem case, the application shortcut is on a Windows XP Pro Version 2002 SP2 PC with the app & data on a Windows 2003 server. Users are local Admins on their PCs with "Full Control"over the directory and files on the server where the data (access 97 db) resides. This type of setup is typical and has worked without any problems for clients.
The application is written in Visual Basic, using Crystal Reports 6 (using DAO). We close the recordset, set it to zero and then it hangs on closing the db (.Close command).
A few key pieces of information:
- The application closes fine if the app & data (access 97 db) are on a local PC. This includes closing fine if the application is run directly on the Windows 2003 server where the data is stored.
- It worked on this client's network until sometime in the last few weeks.
- One thing that changed is that the company is using VMWare on its servers. Not sure if they started using VMWare at the same time as it started failing. This may be unrelated. Possibly other things changed, but can't get any more information ... yet.
- It works fine running the application from a Windows Vista PC with a user who is a domain admin.
- The access db and application hang for about 10-20 minutes and then eventually closes. It appears that somehow
Crystal Reports is keeping the db open, but I'm not sure why.The application doesn't quit and the database doesn't close even if I try to end the task with the Task Manager.
- The Crystl32.ocx version being used is 8.0.0.4 (if that matters).
- I copied 6 month old program files and database files to a test folder on the Windows 2003 server. It fails using these files that worked fine 6 months ago.
Any ideas or help would be greatly appreciated! If you know of another good place to post this, please let me know.
Thanks!
- Mark

Crystal doesn't support tables in HTML interpretation.
You can probably work your way around this by doing Replace() calls on the relevant tags.
See:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033383334%7D.do
The supported HTML tags are:
" html
" body
" div (causes a paragraph break)
" tr (causes only a paragraph break; does not
preserve column structure of a table)
" span
" font
" p (causes a paragraph break)
" br (causes a paragraph break)
" h1 (causes a paragraph break, makes the font bold
& twice default size)
" h2 (causes a paragraph break, makes the font bold
& 1.5 times default size)
" h3 (causes a paragraph break, makes the font bold
& 9/8 default size)
" h4 (causes a paragraph break, makes the font bold)
" h5 (causes a paragraph break, makes the font bold
& 5/6 default size)
" h6 (causes a paragraph break, makes the font bold
& 5/8 default size)
" center
" big (increases font size by 2 points)
" small (decreases font size by 2 points if it's 8
points or larger)
" b
" i
" s
" strike
" u
The supported HTML attributes are:
" align
" face
" size
" color
" style
" font-family
" font-size
" font-style
" font-weight

Adobe Reader 11.0 (AcroRd32) does not close

Hi,
I am using CL_GUI_FRONTEND_SERVICES=>Execute method to print PDF form in foreground passing '/t' as parameter. Once executed the Adobe Reader opens and then the file opens and close and go to printer but the Adobe Reader remains open and does not close.
Is there any way I can close the reader too along with the document?
Thanks for the help.
Regards,
AShwini

Whatever page orientation was provided during the PDF creation process will be the page orientation in the PDF.
This is what is presented to a PDF "viewer" (such as Adobe Reader).
Adobe Reader (or any PDF "viewer") cannot permanently change page orientation.
Adobe Reader (& other applications) is separate from installed printer drivers so it is expected that the application isn't retaining what is configured in the printer drivers.
(A change to a local or network printer's printer driver configuration does not "touch" the PDF viewer's configuration. - Cinnamon added to the mug of mulled applejack does not change the wine in the adjacent wine glass.)
Adobe Reader defaults to whatever a given PDF page's page orientation happens to be.
Using Acrobat one can permanently change a PDF's page orientation.
Be well...

Clinking on the X does not close the Tab

Similar Messages

Maybe you are looking for