Clip envelopes not working CS5.5

Hey everyone, I've run into an issue where I can no longer adjust clip volume or pan while in multi-track. I have CS5.5 on both my laptop and my desktop. It functions perfectly on my laptop, but I can't see any settings that are different between the two. This just happened suddenly. I've been using the Audition line since the first Cool-Edit came out, and I've never run into this issue. Any ideas or suggestions?

In the Multitrack menu has "Enable Clip Keyframe Editing" been turned off?

Similar Messages

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Have used large format, but using the 'burn' software, I am not getting seamless video quality on DVD even though I am burning at 2* speed. Any ideas? Do I need better software? Or is there a problem with the SuperDrive?

Play back video clip is not working in the event browser...

Hello,
I have a problem in the event browser only. If I place the skimmer in any clip and press the space bar, nothing happen. If I press the "play" arrow" it does not work neither nor through the presentation menu.
The space bar shortcut to play works perfectly fine in the timeline, but not in the event browser.
In order to preview a clip at normal speed (100%), I have to drag it in the timeline and play it wich is rather anoying.
Any idea on how to correct this issue would be very much welcome.
Thank you very much for your help.

I was having this exact same problem. I tried deleting the preferences, however that didn't work. But, yes, when I switched the view from 'show viewers on second display', back to 'show on main display'... the spacebar worked again... then I switched back to showing the viewers on my second display, the original circumstance (which is definitely my preference)... and so far it is working again.. doesn't seem like anything has been 'fixed', but hopefully this doesn't happen often.
So thanks to this thread, as I had no idea what to do, and it was getting very annoying.

Clip looping not working correctly unless I edit clip in Waveform editor (CS6)

I record a short clip
I use the, razor, slip or time selection to trim the clip to the exact length I want it to be.
I rt-click the clip and enable looping
I go to the right edge of the clip and stretch the clip to make it loop one or more times.
Problem, the clip loops but not at the begin and end point I expected based on #2 above.
I eventually went into the wave form editor and just deleted the dead air at the beginning of the clip (but not at the end) and now the looping feature works as expected.
Am I missing something? Is this the correct behavior? Do I have to edit a clip in waveform editor to make it loop correctly?
Thanks, I'm new to AA and just getting started with CS6 version.

bmfm_ wrote:
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
Hi bmfm,
I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
Thanks,
Kevin

Adding Slo Mo to a clip that's between 2 other clips? Not working Correctly

Hi,
I have a timeline full of clips.
I inseet a clip that is 4 seconds long between 2 clips that are already on the timeline.
I want to make the inserted clip 8 seconds long,
I highlight that clip in the timeline, go to my "Speed/Duration", the dialog box opens and I change the time to 8 seconds or 50%.
On the timeline, the top of the clip turns red, like it needs to be rendered, the clip now says it's 8 seconds, but it is still only 4 seconds.
Why?
When I take that same clip and put it on the end of the timeline where there is no clip in front or behind it and I change the speed, it works correctly.
Why?
Can you insert a clip between two other clips on the timeline and perform a "slow motion?" The clip should get bigger and all rest of the clips should all move down to the right.
Why does this not work in Premiere Pro CS 5.5?
Thanks in advance.

Thanks everyone,
I come from Final Cut 7 and when I do a slo mo it just moves everything down to the right on the timeline. That is what I am used to.
I just did it in Premiere and checked the Ripple Edit check box in the Speed Duration Dialog box and then add slo motion, , and it did move everything to the right, but I had to render all of the stuff that needs rendering all over again. Don't want to do that everyime I change speed on a clip.
Thanks again.

Space Bar Hand Move & CMD-Space Zoom Not Working-CS5

Today, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
Anybody else come across this? I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
Thanks for any help.

I don't believe it but I think that I finally found the culprit: hulu (the desktop app, not through a browser).
To make sure, I rebooted, launched PS, Flash, and InDesign, and then fired up every app that I could think of, one by one, testing each time, leaving hulu for last. Sure enough, it was not until I got to hulu that the space bar hand/zpom stopped working. And then I went one by one, quitting each app, testing each time, again leaving hulu till the last. Sure enough again, the space bar continued not working until I quit hulu, the very last app that I had running (aside from CS5 and system processes).
Please, please do not tell me that there is a conflict between CS5 and hulu's utilization of Flash! That would just make Mad Dog Jobs' a happy camper. (I am a big supporter of Flash on the iPad).
What a relief. Except how am I now going to watch my TV shows while working???
In regards to browser conflicts, I have had none with Safari, Firefox, or Chrome.
Adobe, I hope that this information helps. Let me know if you need any info screen capped.

Clip import not working...black frame.

Hello. New install of Premiere Pro CC. Importing clips not working. Thumbnails in media browser are visible until the mouse-over. At that time, the entire screen goes black for 1-2 seconds and then the thumbnail has turned black. Clip is black after import as well. This is true so far for Prores, DPX as well as a simple JPG. Any ideas?
Thanks,
Brian

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
-If Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Using the spacebar for starting and stopping a clip does not work

Hi!
The spacebar for starting and stopping the playing of a clip in the viewer of a sequence in the timeline has a live of its own. Without changing any setings, it sometimes works, but mostly not. Is there a seeting, I have not figured out yet? While in a session with Final Cut Express, it does not change its behavior. It starts with a working or not working spacebar. The same applies to the arrows to go back and for a frame, or back and for a clip. If the spacebar does not work, the arrows do not work either.

thanks everybody. But my spacebar and arrow keys still do not work.
As uggested, I deleted the preferences in the library (which is also what is suggested by fcpbook.com/Misc1.html)
I am used working with Final Cut for some time now. And just got myself a new iMac and the program. So everything is quite new. I did not change any settings so far.
The first 2 days everything was fine.
Then, one day, the spacebar and the arrow key stopped working. Not in the middle of a session, but when I started the FCE new. Inbetween, it worked for some time. Now, the spacebar is gone again.
It's just the function of playing the clip that does not work. In whatever window (timeline, viewer). The function of the spacebar to make a space (for example in te name of clip or in a text file) works fine.
I would not mind the spacebar that much, but I miss the arrow keys to go from frame to frame, or from clip. It's strange.

Highlight clipping does not work

I have done exposure bias tests overexposing a sheet of white paper. Even my +5 overexposed files do not show clipping. LAB values read 100% even on +3 exp biased shots.

Hey. Thank you for the answer but this was not the
case. The report works fine and i get all the results
no matter what the cap is. The problem is with
higlighting words in report (this is this built in
functionality in APEX when you choose report and then
specific column to edit then there is a field
"Highlight words". There I put &P70_F_NAME, which is
my search field item name.
The problem is that it does not highlight word if it
has different caps used in it. But the word is still
the same - only caps are different. I need a solution
where the same search string is highlighted no matter
what the caps are.I understand that your search word highlighting is not working the way you expect it to. I was trying to point out that the way mine are implemented, they highlight the search term regardless of case entered into the search field.
>
At the moment it works like that:
Searh string: milk
Highlighting: hilights word "milk" in report result
but does not highlight words "milK", "Milk", "MILK"
etc
What I need is that all those words would be
highlighted as well.I suspect that you might be overriding the highlighting with some other styling, either through your template definition or column specific formatting.
Can you put an example of this on apex.oracle.com so we can look at it and try to see what's going on? If you do put it on the hosted site make sure to reply back here with the workspace, login and password, application and page number where the problem occurs.
Earl

Motion tween not working - CS5

I created a symbol, placed it on the timeline, made a copy and moved it to another place on the timeline, clicked in the middle and selected motion tween. It shows a motion tween on my timeline, but when I move the playhead, there is no animation, just a start state and an end state. Help, please!

should only be the symbol on that layer, there should be no other object, be careful, a single point can do not work
If you copy the symbol in the time line then use "Create Classic Tween"
to use "Create Motion Tween" just right click on the frame in the timeline (without copying anything in the timeline) and select "Create Motion Tween", position the playhead at the frame you want and move the position of symbol

Highlight and shadow clipping preview not working in LR5

There's a gap between the edge of my tonal information and the end of the histogram box on both sides of the graph. No matter how bright or dark I make the image it does not show clipping and the values do not slide to the far edges of the box like they used to. Also, holding down option when dragging the 'whites' and 'blacks' sliders no longer shows me clipped values no matter how bright or dark I make it. Ugh....I use these features all the time and feel blind without them.

You didn't post the original, before adding the +5 exposure.
I played around in LR5 with some of my photos, and I found this one that exhibits similar results on adding +5 exposure, but it starts off as underexposed and low contrast. Anything a bit more exposed or with a slightly brighter area (e.g. make dog's front leg a tiny bit brighter) does clip. (Note - this is the original photo without adding any exposure).

Spacebar to toggle Hand Tool is not working (CS5)

In InDesign, using the spacebar to toggle the Hand Tool stops working.
When it stops working in InDesign, it also stops in Photoshop and Illustrator.
If I close the applications, and restart the machine - this combination starts working again, however after a while it stops working again.
Any assistance is greatly appreciated - you don't realize how much you use this 'til it goes away!
Matt
===============================
iMac 27" / 2.93 GHz Intel Core i7
8 GB Ram
OS X 10.6.5

Okay, so I think I might be able to help. I'm not a tech expert, but I had this issue today. It only started happening after I had an new hard drive put in, at which point a new internet security program was installed on my computer. Before this program was on my machine, this "temporary hand tool with the use of the space bar in Adobe CS products not working" problem did not occur. So, I figured it had to do with upgrading from OS 10.6 to OS 10.7 or with Webroot {the internet security program}, since those were really the only things that changed from pre- hard drive crash to post- hard drive crash. When I was poking around Webroot, I noticed there was a "Pause Secure Keyboard Entry" button to choose. Seeing that word "keyboard" was the lightbulb moment. Coupled with the comment above from Larry G. Schneider...
It's a Mac OS security bit which blocks the modifier keys from working if there is an open port which has access. It's supposed to prevent malware from executing system events.
I figured that my Webroot {which is meant to prevent malware and such} was overriding certain keyboard functions to prevent malware from detecting my keyed entries in place that could breech security on my machine.
So, I decided to try turning that pause button on... and sure enough, my temporary space bar hand tool came back. That is the only thing that worked. Not quitting out of Chrome. I suspect the reason for that is because Webroot was still operating outside of my Chrome application being open and active. So, for those who were able to get it to work again by quitting Chrome {or Safari, Firefox, etc... any of the above mentioned}, perhaps in quitting out, it was automatically quitting some other type of security extension that is loaded in the browser that does not work independently of the browser, but only when the browser is open. Quitting the browser would quit the security extension that was preventing keystroke detection and securing keyboard entry.
Apparently, this could also be turned on in Terminal {something I discovered by researching my problem and finding an article about it}. See screen capture below.
So, if it can also be turned on there, I imagine it's something that comes with several applications or extensions. If you are experiencing this problem, my suggestion is to find out if there is somewhere on your machine, in some running program, where this security is turned on, and then try turning it off to see if you got your hand tool back. It worked immediately for me after having tried many other things. This might also explain why it's only a temporary fix for some... why it returns, because the default of that program that has the security {Secure Keyboard Entry} is to be on. The nice thing about Webroot is that the button to pause it is always available up in my top menu bar by the date and time on my mac, under the Webroot icon. I can pause it whenever I'm in InDesign {which is where I was experiencing the "bug"}, and then unpause it when I'm not using InDesign to restart that added measure of security.
Hope this helps a lot of people with this issue. I don't seem to have found a solid answer on any forum, but this seems pretty thorough to me. Interested in finding out if others are helped by these same steps. I hope so. And if so, I hope that more applications will make it more obvious so that people don't have to dig around so much. For instance, it would be nice if Adobe saw it as a known and fixable issue and provided documentation about it... what to do or check if it happens to you... so that people won't have to hunt around as much as I did {although, that part was kind of fun and I felt pretty smart and accomplished afterward... even knew the fix when talking to a Geeksquad guy while he was not aware of the problem nor did he have any idea what to suggest}. For me, it was beyond frustrating, because I use that function in InDesign ALL the time. Hopefully Adobe will put something about this in their Help. Perhaps it's already there?? I just know I didn't find anyt
Anyway, just goes to show how much these forums help. Without this thread, I might not have thought twice about the "Pause Secure Keyboard Entry" button when I saw it.
Hope everyone gets a permanent solution to this problem!

Clipping Mask not working

Okay, so I am EXTREMELY new to this (I started about an hour ago!) I am trying to make a clipping mask with the mask being the outline of France and the image inside the French flag. Here are the steps I've taken so far:
File>New
Open>Silhouette of France (photo)
Image trace as silhouette>Expand.
Drag in to new file.
Open>French flag (photo)
Drag in to new file and put in separate layer to the silhouette.
Place the silhouette on top of the French flag, select all, make clipping mask.
Then everything goes white!! I can still see the outline, paths etc. of the silhouette but I just don't understand what I'm doing wrong! If someone could explain it to me in layman's terms that would be amazing because I really don't know what I'm doing!
I'll include the pictures I am using and the end result I keep getting...

SoBo,
The France parts seem to be a Group rather than a Compound Path. It would be better if you could expand the Layer(s) completely, also expanding the Group.
As I said, an Opacity Mask may be more forgiving, and work with a Group.
I took the France parts to have no stroke and a white fill, if not, you may give it one (or a black fill), then (the Invert Mask suggested in post #2 was based on a black fill, sorry):
1) Select the two parts of France and Object>Group or Object>Compound Mask>Make;
2) Select all and in the Appearance palette flyout click Make Opacity Mask with Clip ticked and Invert Mask unticked (ticked if the fill is black).
From the OP:
Drag in to new file and put in separate layer to the silhouette.
To have it in the same layer, just have one Layer and File>Place the flag image into it, then the France image, and take it from there.

Clipping paths not working in CS4 on Windows

I have an image of a dohnut on a plate. I want a clippint path around the dohnut and one in the dohnut hole. Using the option icons does not give me a result of just a dohnut for placement over a color or image background in an Indesign page. I've tried this on Mac and it works just fine. What's the problem with my Photoshop CS4 on Windows?
TIA

Adendum.
Ok. It works, but you have to selected the icon on the far right before drawing the first path, or select the paths with paths selection tool/direct selection tool, and then click the right icon. Otherwiswe the result is inverted - you get the image area outside the large clipping and the area inside the small clipping when place over color or image on a page.
If I use the magic wand to select the area around and inside the doughnut and choose Make Selection... in the Paths pallet, then the function works regardless of what paths icon is initially selected.
Hmmm.

Clip detector not working properly

Hi!
When recording into logic the Clip detector will only move up to 0.0. Even if the signal is distorting it will not display any +db reading.
This is happening on both existing and new tracks, but was not a problem when I first started using logic.
Does anyone know how to reset the clip detector so it will reading distorted signals?
G4 powerbook Mac OS X (10.3.8)

Suggested test to see if the meters will work "internally":
With your studio monitoring turned WAY DOWN...
1. Select an empty, mono Audio Instrument and insert Logic's Test Osc plug-in
2. Route that signal to Outputs 1-2
3. Move the Test Osc's level control to 0dB
4. Click on the Instrument fader's clip indicator to clear it and establish the true, current level
QUESTION: Does the Instrument's channel read 0dB?
5. Double-click "Out 1-2" to take you to the Output Level fader.
QUESTION: Does its meter read 0dB?
6. Now move the Test Osc's level control to +6dB
7. Check both the Instrument and Output Level fader's meters.
QUESTION: Do they both read +5.9dB?
If the answer to those questions is "yes", do this follow-up test:
9. Return the Test Osc's level to 0dB and click on the clip indicator of any audio channel to clear it and display a true reading.
10. Via your mixer, patchbay, or however you do it, patch Output 1 into an available Input (let's say it's input 2).
11. Set up a new Audio Channel (say, track 2) to record input 2 and put that channel into record-ready.
QUESTION: what is the level shown on track 2's meter?
12. Increase the Test Osc's level to +6.
QUESTION: what is the level shown on track 2's meter?

Clip envelopes not working CS5.5

Similar Messages

Maybe you are looking for