Clip is not logged after pushing the log button on the capture window!!

After entering all info I push the log button, the small log window opens and after pushing ok the logged clip does not appear on the browser at all.

Hi -
If you press the large oval Log Bin button, it will bring the bin forward so that it on top of the logging window.
!http://www.spotsbeforeyoureyes.com/LoggingBinDestination.jpg!
If you press it and still don't see a bin containing your clips, you may want to consider trashing your preferences -
http://www.digitalrebellion.com/pref_man.htm
MtD

Similar Messages

Closing the Capture window crashes Premiere

Hi,
I'm attempting to capture video from a Sony DHR-FX1. The capture window doesn't show the video as it plays, but it appears to record it; when I stop and save the clip, the saved video appears in the Library window with a visible thumbnail of the video. As soon as I close the capture window, Premiere suddenly shuts down.
The settings in Premiere:
HDV 1080i30 (60)
29.97
1440x1080 (1.33 anamorphic)
16x9
48kHz 16 bit
The computer is a MacPro Tower with OSX Snow Leopard and I'm running version CS5.5.
Thanks much,
--Chaz

My version of OSX is 10.6.2
I purchased the Master Collection just this week so this is my first time using CS5.5 (and on a Mac no less). I downloaded the latest updates for Premiere [5.5.2] and there was a small improvement. Which now means the program doesn't crash immediately after closing the capture window, though it does eventually. I'm wondering if the crash when closing the capture may have been a coinidence before anyway.
There was a small delay before my latest crash which gave me enough time to save a short 5-sec test snippet. The footage was still in the file when I restarted so we're headed in the right direction. I'm attempting to record the entire tape at once to see if I can manage to save that with the same results.
Are there Codecs associated with this product or for the Mac that you're aware of?

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy

My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

Now that you mentioned it, that might be the source of the problem. Something was definitely wrong with my graphics card before the incident happened. You mean that particular batch of graphics cards had some inherent issues, right? I went to the genius bar, and the 'genius' there, without trying to diagnose the problem properly, just adviced me to buy a new mbp! He said Apple will no longer try to fix or touch macs older than 5 yrs. Mine is 5.5 yrs old...

Invoice outputs are not printing after saving the document..!

Invoice outputs are not printing after saving the document. Eventhough we maintain all condition records not only that Processing log also it showed that it has been processed on some date. but customer not received the printout
Amar

hI,
GO TO IMG, SD, BF, OUTPUT CONTROL, OUTPUT TYPES, SELECT UR OUTPUT TYPE, GO TO DETAILS ICON AND ASSIGN THE VALUE "ISSUE OUTPUT IMMEDIATELY SAVING THE APPLICATION" FROM DROP DOWN DOWN LIST IN THE DEFAULT VALUES
AND ASSIGN THE RELEVENT PRINTER TO USER ID IN SU01 AND IN CONDITION RECORDS
REGARDS,
SK
Edited by: Sadanandam Kasarla on Mar 16, 2009 12:07 PM
Edited by: Sadanandam Kasarla on Mar 16, 2009 12:08 PM
Edited by: Sadanandam Kasarla on Mar 16, 2009 12:10 PM

HT1695 Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts?

Safari for Windows will not log into IIS sites with Windows Authentication

Safari for Windows will not log into IIS sites with Windows Authentication enabled. The IIS log has thousands of login attempts from Safari that result in 401 errors.
I disable Windows Authentication on IIS and it works fine. The problem with that is that my Windows clients stop working properly with seemless logins when I disable this.
The expected behavior is that Safari will work with basic authentication when NTLM does not work. That would result in a password prompt followed by a successful login instead of Safari stopping at "Loading" while hammering the IIS logs.
It does this on all machines that I have tried.
Any ideas or is this a bug?

I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

My MacMini does not stop after giving the order ''switch off''.What can I do?

My MacMini does not stop after giving the order ''switch off''.
It stops only, after pushing the button ''on/off'' for some seconds.
What can I do?
frahsun

boot the Mac into safe mode, repair permissions while in it, then reboot normally.
if that doesn't help, try resetting the System Management Controller (SMC).

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

Content query web part is not working after chaning the DNS entry

Hi all,
We have a content query web part in the sharepoint site but it is not working after changing the DNS Entry for the web site ipaddress from one server to other . But it is working fine on the server, if we try to access the site from other system content
quey server its not working fine and its giving error message as bellow.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

I have custom XSLT . But it is working fine before changing the dns entry as soon as we change the DNS entry the content quey web part is not working. I tried to delete the content query web part and add it once again to the page, As soon as content query
web part is added to the page the fallowing error message is displayed.
Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
Can anyone help me to fix this issue please.

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524

Microphone not working after installing the windows 8.1 on HP TOUCH SCREEN IQ 524,
The system shows everything is ok.
Please any help greatly apreaciated.
Thank you
Valentin

ValentinT, welcome to the forum.
There are no drivers available for Windows 8. I suggest checking in the Control Panel/Sound/Recording to assure that your microphone is selected. It seems that the Sound is one area that gets changed when updating to Win 8.1. At least, this is what happened to me.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Cancelling the GR the excise item tab is not coming after flagging the OK

Hi SAP Experts,
there is one subcon PO for excisable material for depot, after its GR it have been posted from j1iex.
Now there is a requirement to cancel the excise posting for which first of all its GRN should be cancel.
But while cancelling the GR the excise item tab is not coming after flagging the OK.
This problem is there only for the depot, for other plant Im able to cancel for subcon PO.
Thanks & Regards,
Anisha Sinha

still not cleared

Why is the scroll function not working after accessing the voice feature in settings?

Why is the scroll function not working after accessing the voice feature in settings?

For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed:

My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be.

The graph dose not shown after running the Customize JSP Page.

Hi All,
While creating customize JSP I am facing one problem - The graph dose not shown after running the Customize JSP Page.
What are the possibilities ? any body has any Idea Please help me

Hi all,
I have the same issue! Any solution??
Thanks
BI Beans Diagnostics(v1.0.2.0) 11/10/06
=========================================================
JDEV_ORACLE_HOME .......................... = D:\jdev1012b1913
JAVA_HOME ................................. = D:\ORDB10gR2Home\jdk
JDeveloper version ........................ = 10.1.2.1.0.1913
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.67.0
BI Beans internal version ................. = 3.2.2.0.24.2
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.4.2
JDBC JAR file location .................... = D:\jdev1012b1913\jdbc\lib
Database version .......................... = 10.2.0.2.0
OLAP Catalog version ...................... = 10.2.0.2.0
OLAP AW Engine version .................... = 10.2.0.2.0
OLAP API Server version ................... = 10.2.0.2.0
BI Beans Catalog version .................. = 3.2.2.0.24
OLAP API JAR file version ................. = "10.1.0.5.0"
OLAP API JAR file location ................ = D:\jdev1012b1913\jdev\lib\ext
Load OLAP API metadata .................... = Successful
Number of metadata folders ................ = 1
Number of metadata measures ............... = 23
Number of metadata dimensions ............. = 8

Clip is not logged after pushing the log button on the capture window!!

Similar Messages

Maybe you are looking for