Clip Label and Name not automatically updating in the timeline

I just finished a major project, so now it's time to take the plunge and upgrade Premiere. So far, it's going well, but clip labels and names aren't automatically updating in the timeline when I change them in the bin. Is that something that only works on new projects (rather than old projects updated in this new version)? Or...?

Go to the menu File > Project Settings > General and when the Project Pane opens, check the box for "Display the project items name and label color for all instances"
MtD

Similar Messages

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

Hey there Luba_kalstad,
It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section down toward the bottom if needed:
Unable to locate a Wi-Fi network
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
Take care,
Sterling

I have comcast email why is it not automatically updating on my phone and alerting me I received an email? It only updates when I open the email folder.

I have comcast email why is it not automatically updating on my phone and alerting me I received an email? It only updates when I open the email folder.

So I will just have to keep checking my mail folder? That's crazy, I did not have a problem with my Android. Is there a way to get around this? I have been waiting on an email alert and I keep forgetting to check my mail folder, this is very frustrating.
Thank you for your help

Dear community, what to do when iMovie does not automatically updates video from iPhoto. I've closed and reopen, restarted... still no good

Dear community, what to do when iMovie does not automatically updates video from my iPhoto. Usually it will automatically generate new content, but now it's stuck 3 days behind the latest new iPhoto entries... I've restarted all programs, restarted the computer... what else?

Ezy,
I'm not sure what recourse you really have. My expectation would be that Apple is on the hook to warranty your computer, but they only warrant the machine you've got.
The issue of exchange is fully in the hands of the dealer. If it were Apple, they would likely have had a longer return/exchange period (2 weeks is standard in the US, and I think they use the same timeframe internationally), and there have been some reports of people getting machines exchanged even if they were just outside the 2-week period.
However, with Apple dealers, I think they are a little more concerned about old inventory. Who knows what Apple does when you give them back a last-gen Macbook. They probably sell it at a markdown, but even marked down, they still get a profit (most likely). When an authorized reseller gets stuck with an old machine, they probably have to sell it at a loss. Thus, I would expect resellers to be more afraid of holding onto discontinued models.
That said, if they do a lot of business, they should appreciate the value of customer loyalty: it's usually better to lose money on one purchase than lose a customer (and all their future purchases). If you're a regular customer there, you could point out that disappointment could cause you to go to a competitor. That's playing a bit of hardball though.
However, there is maybe an upshot to all of this... The new 13" model did not get the quad-core CPU's.. And it lost its dedicated graphics adapter. I've seen a decent number of people complaining that the new 13" model is worse than the previous one (the one I'm assuming you've gotten). So it might not be such a bad thing after all.

Mail does not automatically update on Mavericks 10.9.1

My Mac Mail does not automatically download after the Mavericks 10.9.1 update on December 16th. I have set preferences to download automatically. It worked fine until recently but now i have to click get mail option to receive emails. It is true for all my accounts (Exchange, Google IMAP, Yahoo IMAP and iCloud IMAP).
Any help is greatly appreciated.

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A folder window will open. Inside it there should be files with names as follows:
Envelope Index
ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Warning: The process may take hours if you have gigantic mailboxes. For reasonable-sized mailboxes, it should only take a few minutes.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

"Your meeting was found to be out of date and has been automatically updated."

Hello, one of our users is stating that when they make changes to meeting dates and/or times, a few minutes to a day later, the changes revert to the original date and/or time. Additionally, they will occasional also receive an email stating "Your meeting
was found to be out of date and has been automatically updated."
This customer is on a Win7 client and running Outlook 2007. Both the OS and Office/Outlook are completely patched as of 08/12/2014. There are also a couple of iOS devices that access the Exchange account and both are running the latest version of iOS according
to the customer.
The customer states that this behavior began immediately following our migration from Exchange 2007 to 2013 a couple of months back. I am not able to see any reason for this at the server level. We also do not currently have any other users complaining of
the same issue. I am unable to replicate the issue using my account. I suspect that it is isolated to this single user at this point.
We are running Exchange v15, build 847.32.
Has anyone experienced the same? Thanks in advance for any input.

Hi,
I noticed that there are some third-party devices used to sync and manage Exchange calendar. Usually, some issues may be caused by some devices used for Exchange ActiveSync service. We can try to disable the devices and check whether the issue persists.
Here is a KB descripted Current issues with Microsoft Exchange ActiveSync and third-party devices:
http://support.microsoft.com/kb/2563324
If the issue is not caused by any third-party programs, please check the time zone from Outlook client, local machine, third-party devices and Outlook Web App. Please also change a computer then send test meeting updates to check if the issue continues.
Regards,
Winnie Liang
TechNet Community Support

How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?

Hello,
How do I edit a merged clip in Audition, that was created in premiere to correct the synchronisation, and have it all updated to the premiere clip?
I have tried several tutorials but these either:
- show correction in premiere sequence (which is not practical; given the huge number of files we have)
- or show the editing in audition of a sequence, not the clip.
We have started merging audio and video (removing the original audio during merge) but some of the merged clips are out of sync, so we need to correct manually, BUT we want to correct the merged clip, which may or may not end up being used, so we do not want to take it to the sequence as all we are doing is prepare the synced files for editing.
Any idea how I can correct the synchronisation in Audition?, when I right click on clip and select "Edit in Adobe Audition" I get a list of files but not a multitrack session where I can see my video and audio tracks.

if premiere pro doesn't sync your footage properly, and you have a huge number of files, you may want to look at pluraleyes. there is a demo, and if it works properly, it would save you time to have it done right the first time, instead of tracking down random merged clips with bad sync.
premiere will either export a complete sequence or "edit clip in audition". the edit clip will create a copy of the original audio and open that in audition. there is no dynamic link, its just an audio file open in two programs at the same time. since there is no dynamic link, its not possible to bring merged clips into audition.
Adobe Premiere Pro Help | Synchronizing audio and video with Merge Clips
Once created, the merged clip cannot be re-synchronized, or adjusted. You must make a new merged clip.
Merged clip audio results in mono track audio only.Final Cut Pro XML and AAF interchange formats are not supported.
this doesn't give me much hope that audition or any other adobe program outside of premiere will help you fix the problem merged clips.

When ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?

when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?
whenever you click a picture in photobooth you have to manually insert it one by one in iphoto
i want to know is there any other option in iphoto which can do this type of thing(adding pictures automatically to iphoto )
so that i do not have to do it manually

Once you take the photo with Photo Booth, select the photo in the tray at the bottom and click on the iPhoto button just abouve and to the left:
Click to view full size
That will import the photo into iPhoto automatically. But PB does not import any and all photo taken into iPhoto automatically. That choice is left to the user.
OT

When ever i click a picture in photo booth it does not automatically update its content is this a bug ?

when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?

Once you take the photo with Photo Booth, select the photo in the tray at the bottom and click on the iPhoto button just abouve and to the left:
Click to view full size
That will import the photo into iPhoto automatically. But PB does not import any and all photo taken into iPhoto automatically. That choice is left to the user.
OT

The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines are not the up to date versions I had.

The latest Premier Pro CC 2014 update forced me to convert and create version of my project while guaranteeing that the project would not be altered; however, the timelines/sequences are not the up to date versions I had. I saved different version of this project for various purposes, but they were all named differently(i.e joe and mary wedding, joe and mary wedding 2, joe and mary wedding 3, joe and mary wedding 3.1). I do not know if they just pulled the timelines from the earliest version, eradicated the data entirely, or something else.
Since the program prompts me to create and save a new version for the updated premier, I still have the previous projects, but cannot open them. I imagine they are unchanged, but cannot be sure.
Thoughts? Is it possible to uninstall an update re-install it later?
Please advise.
Thank you.
Brian

Also...
Add to right click menu of timelines an entry for "go to next keyframe" and "go to last keyframe" a la After Effects, we should also be able to assign a kb shortcut to this.
There are buttons on either side of the create keyframe button to advance forward or backward in the effects control panel or timeline.
You can also advance forward or backward in the effects control window by holding shift while dragging the playhead.
Allow copy/paste of selection of audio/video effects, not just one at a time. Sure we can copy/paste attributes but since we can also copy/paste effects it would only make sense to allow to copy/paste a selection of effects.
I guess I don't get this one. If I have 5 effects on a clip, I can simply command-click on the ones I want to copy over to the other clip.

How to set iPod Classic to NOT automatically update?

After dealing with the debacle of iTunes 11 on my Windows 7 PC for a month I made the move and rolled back to version 10.7, and am once again able to use iTunes the way I want to, with ease and efficiency. One concern I have is that when I connect my iPod to sync it with my library, it automatically downloads updates to the iPod, and I'm worried that at some point the updated iPod software will become incompatible with my older version of iTunes, and I'll be forced to swallow the load of garbage that is iTunes 11 if I want to keep my iPod synced.
I cannot find an option when I connect my iPod and view it in the iTunes window where I might choose to NOT automatically update the iPod software. It tells me the iPod is up to date and gives me the date when it will automatically check for updates, and I assume that when an update is available it automatically downloads and installs the update. Am I right? And is there a way I can prevent this from happening?
My iPod is working fine and I don't see any reason to update it, even if they added new features I prefer to stick with the old version. I no longer trust Apple to issue updates that conform with my user needs and preferences and that are not full of performance bugs.

I've got Version 10.x and in Edit>Preferences, I've had 'check for new software updates automatically' enabled. Periodically I get a 'Do you want to install Version 11?' and I say 'no' and all's well. Why do you think yours will automatically install an update?

HT1451 Why do the song names and cd name not show up on the IPod Shuffle?

Why do the song names and cd name not show up on the Shuffle?

MysticChyk wrote:
Why do the song names and cd name not show up on the Shuffle?
Err this is no longer April 1st you know.
The iPod Shuffle has never had a 'display' on which track names can be shown. See http://www.apple.com/ipod-shuffle/ if you want an iPod which does have a display on which you can see the tracks names and even the album cover art then look instead at the bigger and more expensive iPod Nano http://www.apple.com/ipod-nano/ or iPod Touch http://www.apple.com/ipod-touch/
PS. The current iPod Shuffle even though it has no display on which it can show the track names can read them out loud to you using a voice-synthesiser this is the VoiceOver feature described on the iPod Shuffle product page I listed above.

I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available?

I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks

Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
You also may have to place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

Clip Label and Name not automatically updating in the timeline

Similar Messages

Maybe you are looking for