Clip only displays when moving in program monitor

Coming from CS6, I am trying to get up to speed with CC Premiere 2014. I've noticed that when the select zoom level is set to anything less than 100%, the clip in the program monitors goes black when it is not playing. In other words, if the level is set to Fit or 75%, i can not see it once it stops playing. Has anyone seen this behavior and more importantly, can you tell me how to correct it?
Thank you!!

John, Thank you for the links on wrappers and codecs....very informative.
Sorry it took so long to get back with you....life happens...anyway, i have attached a screen shot of what i'm seeing in premiere pro cc 2014. The files are .mp4 files that I downloaded from the Infinite Skills site as I am taking the self paced Adobe Premiere Pro CC Master class online. The behavior is consistent regardless of he workspace i use....editing, color correction or audio, etc.
I also tried the same files within Abobe PP CS6 and the behavior described above does not occur. The screen shot shows what happens in CS6.
I could be mistaken but this leads me to believe it is a setting issue within premiere and not necessarily a codec or wrapper issue......but at this point, i am certainly open to suggestions.
Thank you.

Similar Messages

Vm fusion 7 only loads when moving curser

vm ware fusion 7 only loads when moving curser

Other than eww's advice, you have been given much incorrect information in this thread. Fusion and parallels can use your Boot Camp installation of Windows as their guest operating system. You only need one installation of Windows, in the Boot Camp partition.
When using the Boot Camp installation of Windows from Parallels or Fusion your installed Windows thinks it has been installed on another computer and requires new activation. Fusion and Parallels are aware of this and both have instructions regarding how to proceed with obtaining another activation key. This does not mean you have to buy the key. It is free. Microsoft is also aware of this and you can activate the second key (for the same one installtion of Windows) by calling Microsoft's registration number. The process is automatic, no person involved, and the second key is free.
So you install one Windows in Boot Camp and obtain a second key for it free. Go to Parallels or the the Fusion site where they explain the process.
One more thing, you can then either boot into Windows or access the same Windows installation from Parallels or Fusion as you like.

Cumulative Percent only displaying when there is a number present

Hi
I am using the below cumulative percent formula for a chart and pivot table display (see below code). The problem is that the cumulative percent and cumulative number are only showing up in the pivot table when there is a number to cumulate (see below screenshot).
While this makes sense logically, I would like to see the value in the prior row appear when there is no value to cumulate so that there is always a value displaying for the user--see second screenshot.
Does anyone know if there is a way to do this?
Paul
Code:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
Current result:
Desired Result:

Hi Greg
I tried your solution above and it works from the perspective that it can provide the cumulative number and cumulative percent for a column where the values in the column are all present.
However, the column I am using represents exit months from foster care actually. There are different month values in the column: .5,1,2,3,4,5,6,9,12,15,18,21,24..... With the exception of .5 to 6 months, they are in 3 month intervals. For this particular
table, I would like to show only those month values that represent 6 month intervals: 6, 12, 18, 24.....
When I do this, the cumulative number only sums the values for the columns that are present in the table and not all the actual values. This gives a different number and is not correct.
Is there a way to get the above function to aggregate all values of a column even when not all values are displayed in the pivot table?
The function I am using is:
=countrows(s1Perm1)
Correctly aggregating values for exit months when they are all present:
When I only display 6 month intervals, only those values present for the column are cumulatively summing. This is not correct:

Icon in header coloumn only displayed when not bound to context

Hi
I face a pretty strange behaviour in my application. I have atable with some columns.
I want the header with an icon behind the text. usually that is no big deal. Alas the icon wll not be displayed when I bind the columns textview to the context. when I hard-code some entry to the "text" property the icon is shown.
I tried it on several columns, copied the columns and just switched the text property, its always the same behaviour...
2004 SP19
Stefan

Ok,
It finally works, it's always good to get a break when you're stuck..
I deleted the tablesorter class and used to "offixial" one from the tutorial. then the icons were displayed after th efirst time it was sorted.
As you can read in thread Re: Webdynpro Table: Column Header sort icon not visible
that happened to others to.
I just added one method to the tablesorter class...
public void sort(IWDNode dataSource, String columnId)
and called that upon table data context binding, so that initialy the table is sorted and also the icon appears on the initially sorted
regards
stefan

Has anyone else experienced a glitch when making cuts? Many of my cuts slip a frame or two when moved from source monitor to sequence and it started with the latest update

Once I updated to the latest version of Premiere 2014.2 I started experiencing a glitch when my cuts would slip a frame or two. At first it was randomly. Then I had footage I was using that was an .avi file that I converted to .m4v using vlc and now in my Premiere project, are having the greatest difficulty keeping my original cut that I create in my source monitor. When I bring it into my timeline, the new frames are added. When I double click the clip into my source monitor, I see that my original cuts remain, not shifted. Looking back in my timeline, unwanted frames are still there. I have to bring it into my source monitor to guess where the right frame would be to compensate for this. It happens more often with the converted files but still happens to .mp4s as well. I am using a Mac Pro 15-in from Early 2011. Thanks for the advice in advance!

I downloaded and installed the latest iTunes 11.2.1 (1) update yesterday. It appears to have corrected this issue to a large extent: plugging in an iThing to sync no longer seems to cause explosive growth in memory footprint. leaks reports a much slower growth in dead memory:
leaks -nocontext -nostacks iTunes | grep total
Process 27307: 353 leaks for 726488 total leaked bytes.
20 minutes later:
leaks -nocontext -nostacks iTunes | grep total
Process 27307: 364 leaks for 1256056 total leaked bytes.
20 minutes later, after DLing updated apps and doing another sync:
leaks -nocontext -nostacks iTunes | grep total
Process 27307: 364 leaks for 1256056 total leaked bytes.
Memory allocation started at 70Mb, grew to 200Mb, and appears to have stabilized there.
I'm going to keep an eye on it overnight, but it looks as if this may not be a complete system killer as it was before, at least in my case. In any case, I can highly recommend this latest iTunes update for anyone else experiencing this specific issue. Updating bug 16772016 with this new information.

Inserted a png PIP into my clip, can see it fine, can see it playing with the clip as expected when moving the play head manually, but cannot get it to play with the clip for preview, pleas help!

I am sorry if my inquiry here seem dumb but I am a new iMovie user and cannot figure this out. I inserted a png image into my video clip in the project as PIP, I can see it and move it and can also see it playing with the main clip if I move the play head manually, I can also see the PIP part only playing along with the undelying main clip if I use the Play button in the preview window when the PIP section is selected, however, for the life of me I cannot get it to play with the main clip all together for previewing the entire video via the video play button. What happens is that the video plays normally and when the PIP section comes in, the video clip stop all motion during the duration of the PIP section and the PIP image itself is simply NOT showing. Am I missing something really stupid here? It seems as it the Picture On Picture is a separate clip that plays with the underlying main video clip if selected and played by itself but it is not part of the video clip and will not play with it. What am I missing here, can anyone please help?
Shony

The easiest way to get up and running is to convert your MP3s to MP4s (obviously there won't be a video track). The following link links to a file that was an MP3 that I converted to an MP4 using QT Player Pro. When you go to export the files, make sure you click on "Options" and then check the box for "Enable Streaming" in the Streaming tab. It should stream flawlessly using QT Player. rtsp://rhsstreamit.rih.org/testmp4/Scorpion.mp4
Make sure you place the media to be streamed in the proper folder. You should only get a "404" message if the physical file doesn't exist.
Good luck!

Still no "Selected clip only" option when exporting?

I have several clips in a project but I want to export them individually, one at a time. Is there a way to do this, or at least move one clip to a new project without having to copy and paste?

I have Final Cut Studio Academic Edition and so do
various other friends I have. Of my friends I am the
only one who does NOT have an option to Export to
MPEG2 from Final Cut Pro when you click on Quicktime
Conversion method.
///It depends which version of FCP you have. When the latest version FCP 5 was introduced, they took away the MPEG2 option. With FCP you have to use Compressor, which caused me a certain amount of frustration.
If you have an earlier version of FCP, not sure about the exact number, because I am relatively new at this, but if you have a registerd copy of Studio DVD Pro installed, you will be have the MPEG2 option.
If you have an earlier verision of FCP, and you do not have the MPEG2 option, you may want to reinstall Studio DVD Pro.
Studio?? If so, how do I completely uninstall Final
Cut Studio, including settings and my serial to do a
complete fresh install?
I'm guessing here, but I would suggest using Spotlight to find any preferences for final cut pro and trashing them, plus the application itself. You might even want to trash the receipts for FCP as well.
Hope this helps.
Hank Kearns
Power Mac G4

Brand new Mac mini ONLY displays when waking from sleep

Have an unusual problem.
Brand new 2011 Mac mini. Turn it on, and I do not get the grey Apple logo screen or normal spinning cog. Light comes on as normal, and chime chimes as normal. I've tried three different monitors now and I never get a display, unless I put the mini to sleep with the power button in back, then wake it with a keyboard key stroke, the display turns on and works as normal.
As of 20 Sep 2011, I've got all the software and EFI updates installed. I've also reset the PMU, SMC, PRAM, and NVRAM to no avail.
Thanks.
DJ Horton
Message was edited by: DJ Horton

Yes, sure did. Tried different cables and Thunderbolt to video adapters. Don't know if it makes a difference, but I'm using VGA. Originally tried it about a week ago with DVI and it worked ok. The problem is the monitor we're using in our classroom doesn't support DVI or HDMI.

Remove the "stop" when moving cursor across monitors |BUILD 9860

I run a setup of 2 monitors. 1920 x 1080, and one 1440 x 900. When I try to move the cursor over from one monitor to the other it "stops" until i drag faster. Extremely annoying, is there any way to turn this off, or is it a bug?
Maybe I could keep it if it wasnt so hard to move the mouse over the screens, but this is terrible .. I cant use windows like this.
Also, its hard to find all the settings for the mouse, like the cursor acceleration etc.

It's the same in Windows 8.
I too have 2 monitors at work with Windows 10 and 2 monitors at home with Windows 8.1
On Windows 8 there is Charm panel at the right edge of the screen and Modern UI apps preview switcher at the left edge of the screen.
On Windows 10 they are disabled in Taskbar and Start Menu Properties, but it seems that traces of screen corner and edge navigation still remain.

How do I rid my contacts list of unwanted addresses that only display when creating a message. These contacts are not in my normal contacts list.

When using my contacts list to address a message, I have unwanted addresses NOT created or entered/saved by me in my contacts list. These addresses do not appear in my contacts database/list.

Restore the backup

Why does my video clip show in the program monitor only when it is playing (the program monitor is blank otherwise)?

I am using WIndows 7 64 bit, and the most recent version of Premiere Pro CC on an I7 machine with 8GB of memory. I have imported a HD .mov clip and placed it on the timeline. When I press 'Play', it shows in the Program Monitor window. When I stop the playing, the window goes blank. I have rendered the clip (it has a yellow bar above it). Even after rendering, the yellow bar remains and the sequence only displays when it is playing. The source monitor has the same behavior.
Not being able to see where I am in a clip is making editing very difficult. I have used Premiere Elements for five years, I have taken the Lynda.com course, so I have some familiarity with the program that suggests that the frame at the point of the CTI should show in the program and source monitors.
What do I need to do to be able to see the frame in the monitors when it isn't playing?
Update: I spent 35 minutes with Tushar in a technical support chat (case number: 0186148124), during which time we deleted the contents of the Media cache folder in C:/Users/Your User Account/AppData/Roaming/Adobe/Common file (after using task manager to close coresync32.exe and creativecloud32.exe) and renamed both the Adobe folder and the 8.0 folder in Documents/Adobe/Premiere Pro/8.0. This didn't get it, but was necessary for the next step:
Going to the File menu, Project Settings, and selecting 'General Settings', Tushar had me change the Renderer to Mercury Playback Engine Software Only (I don't have a GPU accelerator video card yet). I received a warning that all previews would be deleted, which I accepted. That brought the image back to the Program Monitor.
I've posted this for anyone who may experience a similar challenge in the future. Despite a lot of Google searching before I contacted Tech Support, I didn't find anything even close to the description of the problem. I hope this provides that source for future searchers.
Jeff

Thanks, Ann. As I mentioned in my post, Tushar correctly pointed out that, without a GPU accelerated card (which I don't have - mine is a piece of junk which I will be replacing with a compatible one soon) you must use the software only settings. I had changed my project over to the 'software only' setting, and I still had the problem. The value Tushar added was the procedure for clearing the cache.
What I did originally was a newbie error, no argument. I posted it here for others who may fall in the same hole. Your reply confirms that, without a GPU accelerated card, use the software only settings (sounds so obvious, yet I missed it.....).
Jeff

IMac 27" inch display screen flicker issue when moving files

Whenever a drop a file from Finder to my desktop, the screen flickers. Occasionally, when I move a window, it also flickers, but it's a more consistent problem when dropping the files on the desktop. It only flickers once and returns to a completely normal state.
It does NOT happen when going the other way - from the desktop to Finder.
I purchased the iMac AFTER the original firmware updates, so I haven't had to install any of them from the original problem a couple years ago.
I am wondering if this is a problem that is discussed or if there are any suggestions.
Thanks....

I'm having the same problem. Here are the details I was about to post as a separate thread:
27" iMac 2.7GHz Intel Core i5 with 16Gb RAM. I'm also using a 20" ACD alongside, a set up I have used with my previous 24" iMac. The ACD is being used as an extended desktop (not mirrored).
I've just started noticing an odd effect: When moving a file from a folder onto the desktop, the entire iMac screen flickers and breaks up momentarily before reverting to normal. It is an effect which lasts a fraction of a second and is visually very intrusive.
Weirdly, if I move the file but continue to hold it for a second before releasing to place it on the desktop, there is no flicker.
Similarly, if I open another folder and place the window alongside, moving a file from window to window produces no flicker. It only happens when moving something to the desktop.
The effect does not happen if the ACD is turned off (but connected) or the ACD is used in Mirror mode.
Does this sound like a hardware or software fault?

Program monitor during playback in always in focus; preventing effects panel or mixer to be seen

Dear Premiere CC users:
It must have been some recent update for premiere pro (a "bug fixes" one), which changed how Premiere works now.
I use 2 monitors where one is full screen preview, and another is for whole application. On that second monitor I used to have workspace organized in a way that NO program monitor was shown. I used to have effect panel / audio mixer + project files + effect controls always shown. Source monitor was triggered when I doubleclicked a clip, program monitor I had always hidden behind, because I have another full screen monitor for program.
Now when I playback program monitor is instantly pulled in front and I cant have mixer engaged, or any other windows in same panel. If I close the program monitor I loose picture on fullscreen monitor too. I don't want to see program monitor in my primary display where premiere GUI sits; only on external display, on second display. But from some update on, this is not possible anymoore.
Now if I want to have external full screen preview, a regular program monitor is always visible too. It is not needed, annoying, and it takes space on GUI area for other frequent needed things; like effects, or mixer. Shure it is good option to have it on a small laptop lcd, but annoying on a 2 big LCD setup.
Does anybody know how to change this back?
Many thanks for opinions or help.
PS: Right now I'm using a workaround: I pulled program monitor from main panel, and put it in panel with volume meter and reduced it's size to 1 x 1 cm - so It is almost invisible and does not steal too much my GUI real estate. But It seems that I have less smooth playback on external display now when program is played back on 2 screens simultaneously, than before.
MIHAEL

I worked with almost all major big NLE products, and once I was hired at local studio with Premiere 6.0/6.5. It was nightmare compared to big ones from that time. But I personaly use and love Premiere PRO from version 1 (e.g. Premiere 7) on. I have tons of stories of broken projects on so many ways. So custom workspaces are jus a drop in to the ocean. As I love it, I cant admire some very old programming solution on what Premiere is based on. But regardles I lasted with Adobe for longer than decade now.
I live with all errors and fight with them by backuping projects in hundred of instances and with splitting project on smaller blocks - e.g. intro, reception, wedding, first dance... I always export finished part of feature in several needed formats and save whole project via "project manager" too. Than I have backup of all that of at least 2 times (3 for projects). I always save original files from camera too.
Regarding updates: We are not used from Adobe to have ANY updates or bug fixes to their products before just new wersion was released. We cursed that hundreds of times. Now they update more than Microsoft. And we are unhappy of that either.
Just today I learned, that some update might change the behaviour of marker placement with "*" on timeline... weird. Sometimes markers are added as clip markers, sometimes as timeline - as I was used to. I must dig into it...
regards.
MIHAEL

Sluggish timeline and glitching/freezing program monitor in Premiere Pro CC 8.1

Hi all,
I've recently switched from CS6 to the 2014 Adobe CC due to a student license expiring. I'm also somewhat new to r3d workflow so chances are I may be doing something wrong.
I've worked on one other project with a mix of r3d and DSLR footage in CS6, but this is my first time cutting with red footage in Premiere CC.
*Apologies in advance for the novel, but I figured I'd be as thorough as possible to hopefully help get this issue resolved for myself any anyone else who's experiencing this.*
I'm cutting a 9:30 "party mix" in a music video style edit. So far I've had several (seemingly random) issues and glitches, that have been making my life exceptionally difficult and this 10/30 deadline exceptionally scary.
I'm working with content that we captured using exclusively RED Epic Dragon, and Epic Mysterium cameras. We recorded with several different frame rates, with varying resolution, compression, and aspect ratios. Project was set in-camera to 23.976.
Issue #1
I've created a nearly two hour, organized roll of sub-clip selects in a RED R3D 2K 23.976 16x9 timeline, in which i'll use to browse my raw media when sequencing on a timeline stacked directly below.
Often times when pulling clips from one timeline down to the other, the over-all responsiveness of the program will become ultra sluggish. Causing a clip (that's being dragged/placed) to lag heavily, maybe a couple seconds behind my cursor. This issue will often resolve itself after maybe 5 minutes or so, but makes fluid sequencing rather difficult.
Issue #2
The other issue I'm having is a glitchy or completely unresponsive program monitor. Again this issue appears to be totally random, and seems to happen most when I'm deep into some really intense sequencing/ clip arrangement, and scrubbing quickly.
Usually a portion of a single clip (or sometimes a couple clips) will freeze up in the program monitor while I'm scrubbing over them on the timeline. This will sometimes cause them to freeze all together during playback as well as cause surrounding clips to lag a bit (maybe 4-8fps).
I'll scrub back over the problem area and sometimes get a solid green bar halfway through my image, usually right before the program monitor just reads solid black throughout the entire timeline. This issue is temporarily resolved by restarting the program (about every 15-30 minutes).
Issue #3
As I'm scrubbing I'll also experience heavy glitching with both my image and the program monitor GUI itself. However, this issue typically wont affect playback.
I've uploaded a quick camera-phone video of this issue as it's a little tough to describe Program monitor glitch - YouTube
I know the timeline is un-rendered in this sample, (but this issue happens either way).
Two painstaking weeks later, I've finally completed the first pass.
Working on revisions now, and ultimately I'd like to copy paste the sequence into a 4K timeline for before After Effects work and export.
I tried pulling it into a 4K timeline (with playback set to 1/8 res) and the issues stated above got 10x worse.
Sticking to the 2K timeline for now (with playback at 1/4 res)
P.S. I'm also cutting a much simpler corporate project with 5DMKIII footage and having no real issues.
As for my rig,
I'm running Adobe Premiere CC 2014 v8.1
Freshly installed Windows 7 Professional SP1 PC Desktop
Freshly installed Samsung 1TB SSD running my OS and Adobe CC
Intel Core i7-2600k CPU at 3.4GHz (8CPUs) - Watercooled
16GB Ram (3gb allocated for other programs)
Nvidia GeForce GTX 570 4GB GDDR5 - 3.40.62 Drivers installed
Pulling media from 2x 3TB Seagate Barracuda 7200RPM drives, striped at RAID 0
Thanks for reading!
-Sam

So it seems to be behaving slightly better in "Software Only"
Though slightly less frequently, I'm still running into the issues stated above, mostly issue #2.
I also have a new problem to add to this thread as I'm starting to pull clips into After Effects.
First being that (again, seemingly random) dynamic-linked clips decide not to show up on the timeline in AE, and then seem to vanish from the program monitor in Premiere as well.
As you can see in the screenshots attached- After Effects see's the media itself from which the clip came from, however it won't show up in the monitor.
I'm also having issues where I'll render the Premiere project with the dynamic linked clips that DO work, and then as soon as I restart the program, those previews are gone and I have to re-render the the AE Linked comps.

Grey screen when connected to external monitor / projector

I have a 13" Macbook Pro (OS 10.6.7, 2.4 GHz Intel, NVIDIA GeForce 320M) that is freezing up when connected to an external monitor or projector. The monitor or projector works fine when initially connected, but after an hour or so of use, both screens will suddenly turn grey or black and the computer is totally unresponsive (the sleep light is not on). I have to do a hard shut down using the power button. This problem only occures when connected to a monitor / projector.
This freeze up happens in various use cases; watching a movie, web surfing, editing docs, or even when i'm away from the computer, it seems entirely random.
I'm connecting to a Dell U2711 external monitor using a HDMI cable. I've tried 3 different HDMI cables / adaptors, so I'm pretty sure it's not the cable that's the problem. The problem also occures when connected to an Epson Powerlite HD 705 projector (again using HDMI)
I've called Applecare and run a Hardware Test (no issues found), I've also re-installed the operating system and ran all updates. The problem still occures.
Idea ideas on what's wrong?

Found the solution here: http://apple.stackexchange.com/questions/152203/osx-10-10-yosmite-turn-off-macbo ok-pros-display-while-connect-to-external-moni
In terminal:
Enable: sudo nvram boot-args="niog=1"
To undo: sudo nvram -d boot-args
This works brilliantly!
Steps I use:
1) After putting in the terminal command, reboot and close the lid immediately
2) Keep the lid closed during boot up and once logged in, open the lid
3) The MacBook Pro's screen is off

Clip only displays when moving in program monitor

Similar Messages

Maybe you are looking for