Clip Rotation and RT Extreme

Hello fellow jog-dialers.
I have an issue where I'm editing some 1080/30p Sony XDCAM footage that was shot with a 90º camera rotation in order to get a vertical (tallscreen) aspect ratio.
My FCP sequence is 1080w x 1920h, and I have been rotating the footage using the clip's Motion tab in order to match the sequence. However, this kills any chance for RT preview, which is in turn killing my workflow.
Does anyone have any thoughts on how I could edit this footage (preferably without dumping all the edits I already have in place) using RT preview? The finished product needs to be 1080x1920, and I prefer not to have to preview the clips with my head turned if possible.

Turn your monitor on it's side and edit vertically?
Seriously, I don't think there is a way to edit this without the need to render. That dimension is non-standard, only because it is on it's side.
Shane

Similar Messages

  • Performance issues with Motion (position, scale, rotate) and GTX 590

    I'm experiencing performance issues with my Premiere Pro CC when I scale, position or rotate a clip in the program monitor.
    I have no performance issues with playback! It's only, when i move something with the mouse or by changing the x,y-values of Position in the Motion-Dialog in video effects.
    Premiere then lags terribly and updates the program monitor only about once per second - this makes it very difficult and cumbersome to work and position things.
    On a second Premiere installation on my laptop, performance is fine and fluid - allthough it doesn't have GPU support and is a much slower computer.
    I'm pretty sure this has somehow to do with my graphic card, which is a Nvidia GTX 590.
    I was told by the support, that it is actually a dual graphic card, which is not supported/liked by Premiere.
    The thing is, until the latest Premiere update, I did not have performance issues at all with this card.
    I also read on the forum that others with the GTX 590 did not experience any problems with it
    So where does this come from?
    There is no change in performance whether or not I activate Mercury Playback Engine GPU acceleration.
    I also tried deactivating one of the 2 gpus, but there also was no change.
    Does anyone else know this problem and has anyone a solution?
    I'm running Premiere CC on a Win 7 64bit engine, Nvidia GTX 590, latest driver (of today),

    I am suffering from the same phenomenon since I updated just before christmas, I think.
    I am hardly able to do scaling, rotating and translating in the program monitor itslef - whil motion has been highlighted in teh effect controls.
    In the effect controls I can scale, rotate etc however.
    Also I have noticed there is a yellow box with handles in teh program monitor. I remember it was white before.
    I cannot figure out what to change in my preferences. What has happened?
    best,
    Hans Wessels
    Premiere CC
    Mac Pro OSX 10.7.5
    16 GB 1066 MHz DD3
    2 X NVIDIA GeForce GT 120 512 MB

  • Rotate and Shift 16-bit Image

    I would like to rotate and shift a 16-bit RGB image (U64 in LabVIEW).  The IMAQ rotate and shift functions don't accept this image type, but they do accept a 16-bit grayscale image (I16 in LabVIEW).  Unfortunately, this clips all values in my original image since it runs from -32,767 to + 32,767.  The ExtractColorPlanes function requires a 16-bit image to be wired as the desination image but the IMAQ create VI does not allow U16 image to be created.
    Any ideas?
    Solved!
    Go to Solution.

    SJT a écrit:
    I would like to rotate and shift a 16-bit RGB image (U64 in LabVIEW).  The IMAQ rotate and shift functions don't accept this image type, but they do accept a 16-bit grayscale image (I16 in LabVIEW).  Unfortunately, this clips all values in my original image since it runs from -32,767 to + 32,767.  The ExtractColorPlanes function requires a 16-bit image to be wired as the desination image but the IMAQ create VI does not allow U16 image to be created.
    IMAQ Create can create U16 images, but the standard Image Type input lack the appropriate value. This is bug n°1 . As workaround, you can either wire directly a con,stant with value 7 or dig into the Vision palettes and get a better typed constant from the IMAQ Cast Image VI.
    However, this is not the solution to your problem, since there is the n°2 bug in the IMAQ ExtractSingleColorPlane VI : it doesn't accept U16 or U64 as destination images, and coerce the output to a I16 default image type.
    A workaround is to create your own color plane extraction function. First convert the U64 image into an array, then extract the desired plane, as shown on the diagram below.
    Message Edité par chilly charly le 12-30-2008 08:31 AM
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Extract Color Plane U64.vi.zip ‏15 KB
    U16 ExtractSingleColorPlane.vi.zip ‏13 KB
    U16 ExtractSingleColorPlane_BD.png ‏10 KB

  • DVD camcorder (VIDEO_TS) - preserve clip date and time

    I had asked this question on the forums a long time ago but iMovie did not seem to be supporting it reliably at the time. But since some time has passed, I wanted to check if iMovie '09 can import clips from a mini DVD (those used in camcorders to capture video directly on to DVD media) AND preserve the clip's date and time.
    What I see is that the first clip gets some date and time related to the event's date and time (perhaps the start time of the first clip?) but all the other clips which are imported, get timestamps of 1 second after that first clip's timestamp.
    These are all my home videos and in order to keep each clip short, I have had the habit of pausing after about a minute or two, resulting in MANY clips over MANY DVD's, so manually updating date and time is absolutely the last resort.
    The DVD player can see the clip date and time correctly, and so could the camcorder (I have since sold the darn thing!) so I know that information exists somewhere in the DVD, but it seems like iMovie is unable to "see" it.
    Any help would be appreciated, including programmability hints.

    Thank you for your post.  I figured out why iMovie was assigning today's date to everything that I imported.  It turns out that many of my video files did not have a real "created" date--some had no date at all and some had Wednesday, December, 1967 or 9 (I think).  iMovie defaulted today's date in both of these situations.  I took your advice and ot A Better Finder Attribute and easily converted all of the files using the option to copy the "modified date" into the "created date" attribute.  Now everything imports correctly into iMovie.

  • I go to "clip adjustments" and change the length of a photo. It reverts back to original length. I also shorten it by moving the yellow "box" around a specific clip. It still reverts back to original length. Why?

    I go to "clip adjustments" and change the length of a clip. It reverts back to original length. I've also tried to shorten it by moving the yellow "box" around a specific clip to shorten. It still reverts back to original length. Why?

    Welcome to iMovie Discussions.
    See my 2nd reply to 'getzcreative', here.

  • Problem with rotation and keyboard click sound

    Ok, there's still a problem with the rotation and keyboard click sound and I thought I had the problem fixed.
    It's a serious bug when you want the keyboard click sound enbabled without having the rotation locked. I noticed this bug started when I had the previous iosinstalled 7.0.6.
    Everytime I wanted to enable the keyboard click sound, I have to always go to settings and have lock rotation checked. And it would stay locked.
    If I wanted to rotate my iPad, I have to have mute enabled, but no keyboard click sound.
    I know it sounds confusing. I'm already confused... beh.

    I completely forgot about that.
    Thank you!

  • How to connect my iPad, Brother printer, and AirPort Extreme?

    How to connect my iPad, Brother printer, and AirPort Extreme?

    I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

  • I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

    I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

    Thanks for that info! Even in my time answering questions on iMovie Discussion Group, I never had a good understanding of when and how Optimize Movie came into play. I always would import as Optimized and Large Size and figured that was good enough. But knowing you got much, much more flexibility doing it the way you describe gives me a much better understanding of the different routes you can take into the Event Library.

  • Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

    Hello -
    I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
    I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
    I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
    Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
    Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
    Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
    Thanks a lot,
    -TM
    AirPort Exteme:
    Time Capsule:

    Hello JuliaApple. Welcome to the Apple Discussions!
    You have several ways to configure both base stations for what you are trying to do.
    The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

  • Can a time machine usb drive backup the data from an external usb drive connected to and airport extreme*

    can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?

    Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
    btw - what are the symptoms of your failing drive?
    -mj
    Message was edited by: macjack

  • Time Capsule and Airport Extreme in different modes (n vs. g/n)

    Hello,
    I already have an Airport Extreme. I am very much looking forward to buying the new Time Capsule when it becomes available.
    Can I set up these two to create one wireless network so that the Time Capsule is n only and the Extreme is g/n? Without a cable? I have an adsl box with the extreme in our bedroom and plan to place the time capsule in another room with a couple of usb disks, where the noise does not disturb our sleep.
    If yes, could you give me short instructions how to do that.
    Help is much appreciated!

    Hi,
    here are the set-up instructions, starting at page 47 - http://manuals.info.apple.com/en/DesigningAirPort_Networks_Using_AirPortUtility.pdf
    Regards

  • How to prevent frozen video (in both clip previews and exported videos)?

    When imported into iMovie, some video clips do not show preview information when you scroll over them. They simply do nothing and stay on a frozen frame. After exporting a project with one of these clips in the timeline, when the clip should clip the video freezes on that one frame while the audio plays until the clip is over. I have tried converting these videos into several other formats, codecs, resolutions, bit rates, etc, with no success. A video that freezes in iMovie, always freezes in iMovie (or freezes when exported) and I can't find any solution to make these clips play when assosated with iMovie.
    The clips playback file before importing into iMovie.
    OS X 10.7.5
    iMovie 9.0.8

    Hi aalincoln,
    I had a similar problem. For me it was because my memory was reaching it's limits, not the space on my harddrive. I closed all other programs to make sure iMovie has all the memory it needs and played/export the clips again and it worked.
    Try downloading Memory Clean or another solution to see your current memory usage.
    Hope this helps!
    Succes!
    Frans

  • How to rotate and translate an object at the same time??

    Hi, I have a problem with rotation and translation of an object at the same time. I wrote a behovior class for my object (a cylinder). When some conditions are true the cylinder is added to a robot arm. Then it is translated so that the cylinder would be very close to the arm (looks like the robot is holding it). And now the behavior should also rotate the cylinder because the angle is 0 and it should be 90. I can translate the object or I can rotate the object but when I'm trying to do it at the same time (I want to combine rotation and translation) it doesn't work.
    Could anyone help me, please :)

    You can used to Matrix3f
    This object is a rotation and translate matrix
    for example:
    private void componerTransformada(){
    Quat4f rot = new Quat4f((float) this.getRotacionSobreX(),(float) this.getRotacionSobreY(),
    (float) this.getRotacionSobreZ(),1.0f);
    Vector3f tras = new Vector3f(-4.0f,-4.0f,(-1)*this.getDistanciaDeLaCamara());
    this.setTransformacion(new Transform3D(new Matrix4f(rot, tras, 1.0f)));
    Quat4f is a matrix of ratation
    vector3f is a direction vector
    Transform3d is building with Quat4f and Vector3f.
    That is work i use this to situe the view of point.
    good locky

  • Advice to extend range from Time Capsule - wireless and ethernet with Airport Express and Airport Extreme

    Current wireless network is Time Capsule (connected to a Cisco router, 1GB switch to servers and printer 1) to Airport Express (wireless) and to Airport Extreme (wireless). Distance means poor signal at the Extreme which has 2 printers (ethernet cables) and an iMac (wireless)
    Solution is to connect the Extreme to the Time Capsule via Cat 6 ethernet cable
    How do I configure the TC and the Extreme?
    I will keep the Express for a wireless extension to the TC 

    Wired Ethernet from the TC to the AirPort Extreme will result in much better performance.  It sounds as if you are not configuring the AirPort Extreme correctly.
    Please try the following steps carefully:
    Unplug the Ethernet cable from the AirPort Exteme if it is not already unplugged. With the AirPort Extreme powered on, hold in the reset button on the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart
    Connect the Ethernet cable to the WAN "O" port on the Extreme.
    Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
    The example below displays an AirPort Express. You will see AirPort Extreme.
    AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the Exterme and click Next
    Wait a minute while AirPort Setup configures everything for you. When you see the message of Setup Complete, click Done.
    That's it.  Pretty simple.  Things should be working fine now.

  • Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

    Help!! working on a movie on Imovie. I had to delete a music file from a clip section and now there are some clips that have no audio!!! don't know how to get the audio back to my clips!!!! Help!!!

    You can use some third party software to copy the music from your old iPod back to computer first, and then import the music into iTunes and re-sync them to yournew iPod. Here is a guide about how to transfer iPod music to computer. Hope it helps. Feel free to email me if you need further help.

Maybe you are looking for