Clip showing different source material

I have noticed that one clip in my timeline and bin is showing different material to what was shot. When checking the same source clip using VLC player it is completely different.
Any ideas how I can fix this and why I should be experenceing this problem with only one clip? (what appears to be isolated to one clip - hopefully)
Thanks

Hey, I have had a similar issue with premiere relinking to the wrong file.
Do your clips have names like; Clip0001.mxf ?
My work around in this scenario was to use automator to rename the files but keeping the clip number on the end. (an option in automator finder rename)
Then offline all media (being very carefull, making sure leave files on disk is ticked)
Then relink based on file numbers.
A draining process but this can fix the issue you are having.
Piers

Similar Messages

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC. They say it could have been a Windows update? Is anyone else having this problem and found a solution any suggestions.. Thank you.

Hello, thank you for your help. I finally was able to contact someone from Adobe on line.. It took about 1 hour on hold but I finally won the lotto...Lol. Pr.. /Project/Project Settings/General/ I had the (Mercury Playback Engine GPU Accelerated (CUDA) and not the (Mercury Playback Engine Software Only) It only took 1 second for Adobe to figure it out...Lol.
Although I have a high rated Nvidia card that did handle the software for some time after a hack, I believe a Windows update may have altered my Premiere Pro CS6 settings.
Video card is Geforce Nvidia GTX 765M non compatible with (Mercury Playback Engine GPU Accelerated (CUDA). Thank Ronin Edits and cvid01

I have just updated my Ipod to the latest ios.(deleting everything) and using different sources to get my music back it seems that every time i select multiple/individual songs on itunes i can change artwork but will not show up on my ipod?

I have a windows 8 computer and have recently updated my ipod to the latest ios and it has wiped my Ipod clean except for my photos. whilst trying to get my music back using different sources like CD's and stuff i cant seem to get any album art to load on my Ipod? I can go on itunes and highlight single/multiple items and change the artwork and my computer will confirm it but when I look on my Ipod it doesnt display any art work or allow me to change the artwork that is already there? i need help please!

Album artwork can be added/changed on songs via the iTunes Get Info menu item from the File menu. Note that music that you loaded from CDs will not have any artwork. If you want to aquire artwork you can try the File menu item Library > Get Artwork or you can download artwork from the internet, etc. Note that just changing artwork on your computer won't affect the iPod until you sync.
If the artwork is correct on your computer iTunes then delete all the music on your iPod by syncing with iTunes with no music selected. Then reload the music onto your iPod by again syncing with iTunes with all the music you want selected.

How do I put timecode on the storyline. In FCP 7 there was a time code reader that read the actual TC on the source material. There isn't one in FCP 10.1...Any recommendations???

How do I put timecode on the storyline. In FCP 7 there was a time code reader that read the actual TC on the source material. There isn't one in FCP 10.1...Any recommendations???

TC has not been lost...skimmer shows source TC.
Nanoflash external recorder via SDI on a Sony PMW-EX3.
Ok so Compressor will show source TC on an individual clip, good I didn't know this and it will be helpful.
My scenario. I build a timeline with a whole days shooting involving many different clips and build a Sequence from that-editing out the off camera questions/mistakes etc. In the past I would export with source TC with a Timecode Reader filter applied. Now, it is a TC Generator filter that is available that starts from 00:00.
1. Possible solution, forget the source TC since I have a timeline built with (counter) TC on it and send that to client or get Apple to add it in the future.
2. Apply TC Generator on a clip by clip basis and manually change the TC to match source material. Probably too, much effort though.
Chris

HELP I chose SD project preset instead of source material's HD and I have finished editing, can I change this?

So I have been working on this music video for a long time. I finished yesterday and today I tried to export the video. It had this strange black box around it and the quality was bad.
A little digging showed that the whole time my project presets were for some reason 640x480 SD instead of the 1920x1080 HD of my source video clips, so even if I tried to export in 16:9 HD, stretched 4:3 SD was the maximum quality I could get! The editing is very complex with lots of quick cuts, so there's no way I'm re-doing the whole thing, and I've already tried copying and pasting everything in the timeline to another project with the correct presets, and that doesn't work. Is there ANY way to fix this situation? I'm not too worried about transitions, if I lose those in the process it wouldn't really matter, but I want to save all my quick timed cuts between clips. I am using Premiere Elements 13 on Windows 7 64-bit. The source material is AVCHD 1920x1080p and a mix of 30p and 60p, and I want the final video to be the same but all 30p.
Thanks for reading and I really hope to solve this issue,
Ben.

Ben
Thanks for the update. Sorry that the new project was necessary. You did well making the transition from problem project to new.
However, you may have gotten into some trouble with your export settings. But, at least that can be corrected in the export of the new project and should not require starting from the beginning in yet another project. I am suspecting that your export is 1920 x 1080i 29.97 "M2T AVCHD" instead of 1920 x 1080p 29.97 "M2T AVCHD".
You appear to have used Publish+Share/Computer/AVCHD with the M2T H264 1920 x 1080p24. If you say that your export is 1920 x 1080 29.97, then you would have had to go under the Advanced Button of the p24 preset to customize the preset to 29.97 instead of 24.
But, now for the unexpected under that preset....if you use Frame Rate 24 frames per second, you have progressive settings. But, if you change the Frame Rate to 29.97 under the Advanced Button of the preset, you have interlaced settings. In the latter, note the fields for Upper or Lower for Field Order. That is interlaced video. Interlace video has fields, progressive video does not. And, if you do the export and read the properties of the export using a properties read out program, you confirm interlace and not progressive export. Confirm in project....
Can you use the MP4 H.264 1920 x 1080p30 preset instead?
Please review and consider.
Thank you.
ATR

I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y= this is how when we type "qwerty|" can anyone help me pls?

I have a problem while typing in my MacBook pro. it is showing different characters when i type. for example: qw`e§r]t[y= this is how when we type "qwerty|" can anyone help me pls?

You could just try changing your Input Sources under System Preferences>Language & Text:
But I kind of doubt that's going to work. It may be a hardware problem or a system problem. If you take it into Apple they might be able to determine which and might advise a reinstallation of System software. I would take it to an Apple Store or an AASP but, first, make sure that you have a backup just in case they suggest a clean install of the system.
Good luck,
Clinton

MB5B shows different opening quantity when we select diffferent Stock Type

Dear All,
I am trying to run report MB5B - Stock on posting date with 2 different Stock Types:
- Storage Loc/Batch Stock
- Valuated Stock
But the report shows different opening quantity,total receipt, total issue, but closing quantity is ok.
Could you pls tell me the reason?
Thanks
Cao Huy

Hi,
MB5B transaction is used to display the stock on posting date
It is not possible to view at the same time both Valuated stock and special stock. This is radio button input control,so any one of the stock type only possible to display the material document.
This report display the material and plant vise material document number and total stock and total issue etc for the example,
Plant            1256 test plant
Material         TH1
Description    steel rod
Stock on 01/01/2010                   0.000 PC
Total Receipts                      29.500 PC
Total Issues                         3.000- PC
Stock on 12/31/9999                   26.500 PC
SLoc MvT S Mat. Doc. Item Pstng Date          Quantity BUn
TEST 101   5000003029    1 12/23/2009            1.000 PC
TEST 101   5000003039    1 12/31/2009            1.000 PC
Regards,
thiru

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Source Material error when burning disk image

Well, I've been haunting these forums for 10 days, finding answers to every darn problem under the sun I've encountered! (thanks folks, I've been near hysteria) Now I have yet another problem, and I cannot find an answer in the forums (sorry if it's there.)
I have built my movie in iMovie, imported to iDVD, created my disk image, played my disk image (worked perfectly), connected my brand new LaCie external burner, loaded Toast 6 Lite, dragged my mounted disk image icon into the window, popped in my Verbatim DVD+R and let 'er rip.
And, poo, I'm informed that 4 files are in an unsupported format and cannot be imported. EH? I thought the disk image kept all self-contained? I press onward, and hit burn. Churning, churning... and then this message:
"Could not record disc because there is a problem with the source material. Result code= -18774"
Trying to burn via Disk Utility doesn't work either. My mounted disk shows up, but when highlighted the burn button is grayed out. Only when I click on the .img file is the burn option lit.
Am I supposed to drag the .img file rather than the mounted little disc icon? PLEASE HELP. These movies were SUPPOSED to be Xmas presents... now I'm praying for Michaelmas gifts!
TIA

ohmygosh. Lightbulb! I've been trying to burn the file_name one and not the file_name.img one. I assumed the point of mounting the file was to burn it, but it's only to preview it, yes?? So, I did that via Disk Utility, and it worked!! Only thing I can't figure is how to set the burn speed. I know slower is better, but can't find the place to tell it the speed. It never asks.
Toast still gives me the source material error. I do have the 'video' tab selected, and I've done the drag-n-drop method AND the 'add' method ('copy' is only for transferring data from one CD/DVD to another in my version, evidently). Toast doesn't allow me to grab the .img file, so I'm assuming IT wants the mounted file_name one? I'd still like to be able to use Toast to burn, so a solution to this would be appreciated. I'm using Toast 6 Lite, BTW.

HDV and DV versions from a PAL sequence based on HDV source material

Hi,
what is the best way to create DV ( for PAL) and HDV versions of the same source material ?
I have the source material in HDV and started by putting the clips into a PAL sequence. I did the trimming and fine-tuning in the PAL sequence and thought that I can just copy the final clips into a HDV 1080i sequence to get the HDV version .... Obviously this keeps the PAL resolution and consequently displays the picture scaled down in the larger HDV picture...
Any hints ?
Thanks,
Michael

Do it the other way around. Edit in HDV and pout that into a PAL sequence, or simply export a PAL version when you're finished editing.

In print preview of PO shows Different VAT percentage

Dear Experts
In PO print preview VAT amount one time shows 14%, other time it shows 19%, some other time it shows 28%. But actual percentage is 14%. How it shows different time different values.
Please reply
Regards
Karan

Hi,
Might be you have selected Plant/Vendor/Material combination in key combination of FV11.If this is the case then you get the percentage which you maintained for that combination in FV11.check it out for all your combination is FV12.
Thanks

In and Out points not showing in source monitor

I've noticed this in the past couple of days: setting in and out points in the source monitor, the indicators don't show in the time ruler. In other words, even though I set the in and out points, it looks like nothing has been selected.
If I put the clip into the timeline, the in and out points I chose are respected, but they just don't seem to register in the source monitor, so I can't have confidence in what I have selected.
If I open another clip in the source monitor, then go back to the one I was working on, magically the in and out points are there again. Strange...
At the same time, if I apply audio gain to a clip in the source monitor, it sometimes doesn't "take". It shows that gain has been added, but there is no change in the sound volume when I play it back in the source monitor. Again, if I put the clip in the timeline, the volume is as it should be and the waveform reflects this.
So, is there some underlying bug affecting how clips are dealt with in the source monitor?
I'm on the latest version of Premiere CC 7.2.1 on Windows 8

Thanks for these suggestions. I'll try and answer each one:
Is the Source Monitor zoomed out to show the whole clip? If not, please zoom out to see if the In/Out points are getting painted in the wrong place initially.
Yes, it is zoomed out.
Do the clips have non-zero start timecode? If so, please try with a clip with zero-based timecode. (If you don't have one handy, you can create one fairly easily by exporting a sequence with start TC of 0;00)
The problem is intermittent and in this project all the clips are DSLR .mov files. The problem occurs with some of these and not others.
Have you done anything like setting a custom start timecode or interpreting footage to change the frame rate?
I haven't set a custom timecode. It's true that there is a mix of 24p and 25p clips in the project, but surely this only presents issues in the timeline rather than the source monitor? In any case, I haven't gone to interpret footage on these clips.
Is this happening with all types of project items, including simple clips on disc, or only with certain items like merged clips, multicam sequences, subclips...?
In this project, the only type of clip I'm using is simple clips. There are nested sequences; I'm not sure, but possibly the problem has also presented itself when these are brought into the source monitor - but not exclusively with those.
I hope this helps. This is the first project I have worked on since the latest upgrade and I didn't come across this problem before. As I say, it is intermittent, and it's hardly crippling - just annoying when it happens!
Thanks

One target table is loading from two different source but same columns but one source is in a database and other is in a flat file.

Hope you all are doing good.
I have a business issue to be implemented in ODI 11G. Here it is. I am trying to load a target table from two sources having same coulmn names. But one source is in file format and other is in Oracle Database.
This is what i think i will create two mappings in the same interface using Union between the sources. But i am not sure how the interface would connect to different logical architecture to connect to two different sources.
Thanks,
SM

You are on the right track, this can all be done in a single interface. Do the following
1) Pull your file data model into the source designer and and your target table model to the target pane.
2) Map all the relevant columns
3) In the source designer create a new dataset and choose the UNION join type (this will create a separate tab in the source designer pane)
4) Select the new dataset tab in the source designer pane and pull your source oracle table data model into the source designer. Map all the relevant columns to the target
5) Make sure that your staging location is defined on a relational technology i.e. in this case the target would be an ideal candidate as that is where ODI will stage the data from both file and oracle source and perform the UNION before loading to the target
If you want to look at some pretty screenshots showing the steps above take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

HT2731 How can I change my store to US, now that I am in the US? A link in a previous thread says not accessible as the profile still shows different country..

How can I change my store to US, now that I am in the US? A link in a previous thread says not accessible as the profile still shows different country..

As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

UILoader issue-different sources, but the same content appears.Why?

Hi,
It is strange, I have tested a couple times in different ways but can't figure out why this happens. I will try to brake it down to be clear as I can:
I have picked up a uiLoader component, and copy-pasted four times, so now I got five of them in my flash movie. Each got a different source (dresses/dresses1.swf, dresses/dresses2.swf, dresses/dresses3.swf, dresses/dresses4.swf, dresses/dresses5.swf). But When I launch the movie, all the 5 uiLoaders display the same content: dresses/dresses2.swf, and I can't understand why. For a test, I have replaced the .swf file with some jpeg files, and they were ok, but as I put the swf files back they show the same content again.
The sources are ok, they work perfectly separately, so I can't figure out what is the reason why the swf files are loaded incorrectly..
Please help,
ved

Thanks man for the reply, after a break I have revisited the code while composing a message for u, and I have found the bug...
Thanks!:)

Clip showing different source material

Similar Messages

Maybe you are looking for