Clipboard issue- Automatically copying content past into another system across the network.

Hi,
I am facing issue related clipboard in all windows platform in our organization. Say example: Person A copying something from any application or browser in his system and when he is going to past into another apps(word file or text file) in the same system,
its pasting some other text content, which is copied in another system, which is using by person B. Again Person B when is going to copy and paste something in his system, pasting content is from person C's system. It is happening in all system in our organization.
It is very terrific problem, which is seen first time in my life. It is happening intermittently in all system.
Our organization is mainly R&D and software development company, Developers using windows clipboard in local system, but not
in another system thru n etwork or LAN. I have installed updated windows patch, Forefront antivirus in all system and also run scan. Not found any virus. We are continuously trying to identify the issue. Yet we did not get any solution. 
We are enterprise customer of Microsoft and we using many enterprise solution of Microsoft. I hope any one can help me on the same.
Thanks,
Nirupam Dandapat  

Hi Nirupam,
This is weird. Please disconnect the network from these computer to check if they work fine.
This is also might be caused by some third-party software conflict. In such situation, I would suggest you perform a clean boot in Windows clients to rule out the cause of third party programs.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support

Similar Messages

  • Virtual hostname already assigned to another system on the network

    Sorry for the cross-post... I just want to make sure I get this in the right forum:
    I am having trouble getting past the cluster configuration setup in Clusterware 10.2.0.1.0 on SLES9 -i386.
    The following error explains it all:
    The virtual hostname(s), dl560-3-vip,dl560-4-vip, you have specified appears to be already assigned to another system on the network. Please ensure that the virtual hostname(s) that you use for each of the nodes in the cluster are not in use currently.
    Now if I remove the vip's from my /etc/hosts file, I can proceed to the next step... but I have to re-add them in order for it to resolve and continue.
    Thanks in advanced for your help.

    you shouldn't be able to ping those addresses .... ?Is that a question or a statement... :-) I'm not really sure.

  • After Grid Infrastructure deinstallation:  [INS-40912] Virtual host name assigned to another system on the network

    Hi,
    I have removed a successfully installed Grid Infrastructure Software. Now I was again installing it but the Installer is complaining about "[INS-40912] Virtual host name assigned to another system on the network", which it was not complaining about in the first installation process. :/
    EDIT: I have checked and the two cluster-nodes are interpingable through their virtual IP's.
    I see that the previous installation has created an own interface for that virtual IP:
    eth0:2
    Link encap:Ethernet  HWaddr 00:50:56:B9:0E:AA 
    inet addr:10.200.11.159  Bcast:10.200.11.255  Mask:255.255.252.0
    UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
    Interrupt:19 Base address:0x2000

    OK Solved: I just did:
    ifconfig eth0:2 down

  • Know any reason why color swatch coverts to black when I copy and paste into another document?

    I keep having issues when I copy and paste a table from one document to the next. Some of the PMS ink colors convert to black. Anyone have a clue?

    In colors in the table or elsewhere in the file? Are you using table or cell styles? If so, did you define new ones or redifine the defualts? The general principle to remember when moving content from file to file is that anything like styles or swatches that appear with the same name in both documents will use the definition from the receiving file.
    Anothe possibility, though less likely, is that you've used the ink manager to alias the spot color to black.

  • INS-40912] Virtual host name: rac2-vip.localdomain is assigned to another system on the network.

    Hi,
    I am getting the INS-40912 error while installing clusterware software.
    PFB my host file entry on rac node1
    127.0.0.1   localhost.localdomain localhost
    ::1         localhost6.localdomain6 localhost6
    # Public
    192.168.0.151    rac1.localdomain        rac1
    192.168.0.152    rac2.localdomain        rac2
    # Virtual
    192.168.1.151    rac1-vip.localdomain    rac1-vip
    192.168.1.152    rac2-vip.localdomain    rac2-vip
    # SCAN
    192.168.0.251    rac-scan.localdomain    rac-scan
    And the ifconfig output on node1 is as below
    [root@rac1 etc]# ifconfig
    eth0      Link encap:Ethernet  HWaddr 08:00:27:A8:93:25 
              inet addr:192.168.0.151  Bcast:192.168.0.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fea8:9325/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:245 errors:0 dropped:0 overruns:0 frame:0
              TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:24422 (23.8 KiB)  TX bytes:900 (900.0 b)
    eth1      Link encap:Ethernet  HWaddr 08:00:27:25:5B:4D 
              inet addr:192.168.1.151  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fe25:5b4d/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:16 errors:0 dropped:0 overruns:0 frame:0
              TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:1180 (1.1 KiB)  TX bytes:1404 (1.3 KiB)
    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:16 errors:0 dropped:0 overruns:0 frame:0
              TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:960 (960.0 b)  TX bytes:960 (960.0 b)
    Please provide your suggestions to overcome this error.

    Hi,
    Your public IP address is correct. But your VIP should be on the same subnet like your public IP address.
    eg :
    public IP address : 192.168.0.1 ( where 1 is the ip address of node 1 which exists in the network and all nodes in this network can communicate with this IP. If you do a ping test to this IP address, it should ping)
    VIP : 192.168.0.2 (where 2 is the vip of node 1 which does not exists in the network and its used for communicating only between cluster nodes. If you do a ping test to this VIP before installing the clusterware, it should not ping)
    Additional info:
    Private IP address: 192.168.1.1( for private IP address, the subnet should be different , but IP address should be same like in public IP address
    Do the same configuration for all nodes, you will  be able to install the clusterware.
    Regards,
    Pradeep. V

  • Can the forms created in Forms Central be copied and pasted into Muse?

    Can the forms created in Forms Central be copied and pasted into Muse?

    Hi,
    The form that you create via FormsCentral can be embedded in your Muse site (in Muse you can select Object/Insert HTML and then paste the embed code that you get via FormsCentral by clicking "Distribute" Tab / Embed button.)
    See http://forums.adobe.com/message/5252743#5252743 on how to get the embed code via FormsCentral.
    See https://my.adobeconnect.com/p73yae8df5r/?launcher=false&fcsContent=true&pbMode=normal on how to paste it on Muse.
    Thanks,
    Lucia

  • Using Photoshop scripting copy a layer and paste into another document at a particular selection

    I want to copy a layer of a document and paste it into another document in the particular layer selection..

    Thanks Badunit for your quick response
    I have found the answer - it is a incompatabilty between CopyPaste Pro and Numbers: -
    Thanks dbg1596 - solved my problem with which I wasted a good couple of hours getting more and more frustrated with numbers 3.0
    I had the same problem - copy a cell - paste into another cell and it created three vertical cells with the pasted data in the middle
    Definitely a problem between CopyPaste Pro - one of the most useful aps on my Mac for the last many years
    Once I quit CopyPaste Pro - no problem with pasting in Numbers 3.0
    But I use CopyPaste Pro all the time
    Have the folks responded to your query?
    But I use CopyPaste Pro all the time - hope that it can be sorted sooner rather than later

  • Why when I copy a cell and paste into another it pastes into the middle of three cells?

    Why when I copy a cell and paste into another it pastes into the middle of three cells? I was very fond of using numbers as it was straightforward and much better than Excel. But I made the mistake of installing Mavericks and Numbers 3.0. Now it is worse than Word at doing what it thinks it wants to do rather than what you want to do. I can no longer copy a cell and paste it into another. For some reason on pasting, instead of pasting into just one other cell it pastes into the middle of three cells - what the ****?

    Thanks Badunit for your quick response
    I have found the answer - it is a incompatabilty between CopyPaste Pro and Numbers: -
    Thanks dbg1596 - solved my problem with which I wasted a good couple of hours getting more and more frustrated with numbers 3.0
    I had the same problem - copy a cell - paste into another cell and it created three vertical cells with the pasted data in the middle
    Definitely a problem between CopyPaste Pro - one of the most useful aps on my Mac for the last many years
    Once I quit CopyPaste Pro - no problem with pasting in Numbers 3.0
    But I use CopyPaste Pro all the time
    Have the folks responded to your query?
    But I use CopyPaste Pro all the time - hope that it can be sorted sooner rather than later

  • Copy and paste into dialog boxes

    Copy and paste into dialog boxes
    Greetings:
    This is a cross post, so sorry about that, but I had originally replied to a previous post,
    before I realized it was probably the wrong forum
    for my question.
    Copying from a document to a dialog box field doesn't work anymore; How do I fix it?
    We have the problem since upgrading to Tiger.
    Our Mac users, during their workflow, paste a filename
    from a document into the 'save as' field (when printing to a .ps file).
    This no longer works. UNLESS they control click in the 'save as' field.
    Then they can select 'paste' with the mouse. Why is this happening? and how can we fix it? (so they can just 'command C' then 'command V' as they used to).
    We have repaired permissions, cleared user caches,
    tossed finder prefs, logged in as another user,
    all to no avail.
    Thanks in advance!
    z

    Matt,
    Thanks for your response.
    I agree that something else is capturing the shortcut, as
    all shortcuts are unavailable in the pulldown menus at that point where we used to be able to 'Command V' paste into the text field. We're not using Quick Keys, and the
    Full keyboard access setings are default for OS 10.4.
    I did experiement with turning of some of the modifier F key selections in the Keyboard system prefs but none made
    any change for this issue. For now our work around will be to control click in the text field and select 'paste'.
    Seems odd that the contextual menu is available for that field but a 'command V' or command control V doesn't work.
    Not a huge deal, more of an irritant, but I'll keep on the hunt! Thanks again!

  • Copy sequence markers into another sequence

    Anyone willing to bite?
    I'd like to copy some sequence markers (which all have unique text) from one sequence into another.
    I'm assuming this would be a scripting thing or a fancy xml trick.
    Am I wrong? Is this too complicated to be worthwhile?
    thanks,
    jack

    In case you not just want a copy of the sequence with the marker, here the "fancy XML trick":
    Export your source sequence and the destination sequence as XML.
    Open them in TextEdit (as UTF8). Scroll down to the end of the text files.
    You'll see the end of the last marker of the source sequence as "</marker>", select this line with double-click and shift-click the beginning of the line of the first marker "<marker"> - you'll have to scroll up normally a while.
    Copy and paste into the destination sequence before the end line of the sequence "</sequence>. Save and re-import into FCP.
    Andreas

  • How to copy one schema into another

    I need to copy one schema into another. That means, all the tables, views, constraints, etc, and all the data as well.
    I have a dmp file of source-schema (created daily with expdp by our backup schedule).
    Can I use impdp to import this dmp file into dest-schema? I'm thinking about something like this:
    The dmp file was created with:
    expdp source-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
    Create the copy on dest-schema with:
    impdp dest-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
    (dest-schema is an existing schema on the same machine. I'll drop all the tables before executing the command. Is there anything else I should do first?)
    If this approach is not feasible, kindly suggest me an alternative.
    Thank you.
    Edited by: mgro on Apr 16, 2010 3:22 AM (changed 2nd command: expdp to impdp)

    Thank you both. Dean, I've made a note of your proposed command. May use it next time.
    In the end I used the following command and it worked for me. I added TABLE_EXISTS_ACTION=REPLACE since the destination was not empty.
    First I ran these command logged in as SYS
    GRANT Import Full Database TO dest-schema;
    GRANT Create Any Directory TO dest-schema;
    GRANT Unlimited Tablespace TO dest-schema;
    impdp
    dest-schema/pwd
    DIRECTORY=dmpdir
    DUMPFILE=myproject.dmp
    REMAP_SCHEMA=source-schema:dest-schema
    TABLE_EXISTS_ACTION=REPLACE
    LOGFILE=implog.log
    There were some errors though. The import process complained about constraints referencing non-existent primary keys.
    It turns out that the source schema has some constraints that are marked with status DISABLED. These constraints either:
    - are not part of the DUMP file
    or
    - are in the DUMP file but skipped during import
    Don't know if this is a bug or by design behavior.

  • I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?

    Hello everybody,
    I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
    I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
    Thanks in advance for your answer.
    Yan

    Hello Chris,
    Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
    Thanks for answering so fast.
    Bye.
    Yan

  • I own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error.  i am using copy and paste to prevent miss typing the code.

    i own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error.  i am using copy and paste to prevent miss typing the code.

    Hi Lawrence,
    Please try the steps mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html
    Regards,
    Rave

  • COPY AND PASTE INTO WIN7 DIALOG BOX

    Hi,
    I am new to Win7 and Lenovo Technologies.  I am not sure if this post belongs here or if my problem has to do with Lenovo password management, which I have not yet set up on my new ThinkPad W700. 
    I am unable to copy information from a text file and paste it into a Win 7 dialog box.  I am in a process of loading software from my old machine into the new one.  I have all relevant information on keys, etc., in text files within my installed software archive.  Manual retyping is a pain!  The copy and paste function works just fine outside of the dialogue boxes. 
    Can someone advise me what I need to do in order to allow the pasting of information into the dialogue boxes possible?
    Solved!
    Go to Solution.

    SUPPLEMENT TO MY PREVIOUS POST
    The copy and paste into dialog boxes works just fine.  I suspect that my earlier problem was due to not being familiar with the new computer's keyboard.  I am used to the CTRL key being located at the bottom left of the keyboard.  The new keyboard has the Fn key in that position.  I must have pressed Fn instead of CTRL.  The old habits die hard.  I feel like for not noticing this earlier.

  • Copy and Paste into Java Applet

    I know there have been some posts like this in the paste, but could not find a reasonable explanation.
    JVM 1.4.2_08
    For an unsigned java applet (Swing) I could not copy from a notepad document into my applets JTextField and JTextArea fields.
    JVM 1.5
    For this same applet (Swing) running under 1.5, I could copy and paste from the notepad document into my applets JTextField and JTextArea fields.
    Does anybody know why the difference?
    Is there a way to copy and paste for applets running in the 1.4.2 jvm?
    Thanks.

    I think it must be some security restriction.
    Set a policy for the applet or sign it:
    Set a policy (windows):
    C:\Program Files\Java\j2re****\lib\security\java.policy
    under grant {
         permission java.security.AllPermission;
    this means that you give all permission to all code, if you only want to give permissions for applets
    comming from google you can add the following:
    grant codeBase "http://google.com/-" {
         permission java.security.AllPermission;
    to sign
    http://forum.java.sun.com/thread.jsp?forum=63&thread=524815
    second post

Maybe you are looking for