Clipping mask making everything just disappear

I am trying to make a gear have that nice mettalic shine using the clipping mask, but everytime I make the command the whole thing just dissapears. I am using the pen tool to make 4 triangles with different shades of grey. I then group the triangles, put a radial blur on them and place them under the gear that I created. I select them all and do the clipping mask command, but instead of it being a gear with that radial shine, the whole thing disappears except for the outline of the triangle. HELP!!! I'M STUCK AND I'VE TRIED EVERYTHING (except the right thing)!!!

Usually when everything dispaears then what you intended to use for a clipping mask, is not what happened. Your top most object in the selection is used for the clipping mask.
I fill my clipping mask with a dummy color, to confirm I have my layering correct, the color goes away after the mask command. You can also clean up your document by putting only what you wnat to mask, along with the clipping mask on a new layer, then hit the round button after the layer name to select all in the layer, and mask.

Similar Messages

Almost everything just disappeared in iMovie

I was working on a new iMovie project and a whole bunch of events, projects, and a sizable portion of my library has completely disappeared. Where the heck did everything go? I didn't move any of it to the trash. I just used Time Machine to restore an old library and everything was there. So at this point, no harm no foul. I am a little perplexed that the newest library with the missing films is twice the size, according to the finder, as the "original" library which has 3-4 times the films and clips and such, but I have no idea what this means.
I did recently update to iMovie 10.0.7 and also just update Yosemite to switch to Photos (Though I still occasionally open iPhoto because I can't find things in Photos yet, was that wrong?)
Any help?

And I have OS X Yosemite 10.10.3 in case that matters. I guess I need to update my preferences.

ArcGIS 10.0 to Illustrator (CS5).... Edit, Save, Reopen, Clipping masks are all gone....

I am working from ArcGIS 10.0 to Illustrator CS5.
I make my map in ArcGIS. The layers are in four groups (VECTORS: top, middle, bottom + RASTER). I export the map from layout view to an .ai file. I open the .ai file in illustrator. Edit a couple things. Save the document. Seems simple enough... when I open it it should look just like it did when I just saved it two seconds ago, right?
Nope.
After saving, closing, and reopening all my clipping masks are gone. They have disappeared/ automatically released. I have tried this same process on my personal computer (this issue is happening on a work computer) and I am not having an issue (GIS layers are in groups, I export, open, edit, save, close, reopen... still all clipped and the way I want it). I'm not sure if it is the settings on the work computer that are causing the clipping masks to automatically release on their own or what. When I look through the layers in my .ai file (post save, reopened file) the former clipping masks are now just 'paths.' but if I reclip them they mess up my layers and it seems like a tedious and unnecessary process (especially if the whole thing is working out correctly on my personal computer).
Does anyone have any idea why illustrator is automatically releasing my clipping masks upon saving?
Is it a GIS issue? Or an Illustrator issue? Are my settings wrong? Help!

The first thing you must do when opening an Arc AI file is to do a Save As and overwrite the original file with a new copy of the file in whatever the version of AI you have. If you just do a Save of the Arc file, it will revert to an AI3 file. Everything will be placed on a single layer.

Clipping mask vs. selection?

I want to restrict my painting to only part of an image.
1. How is doing this with a clipping mask different from just making a selection and painting within a selection?
2. How can I make a clipping mask to do this?
Thanks.

Actually with anti-aliased or softened edges of a Selection multiple brush-strokes can produce a different result than if the Layer is clipping masked (or has a Layer Mask).
Good point! The effect would be the same as painting once each on multiple, stacked clipping masks? I think it would. My point was that selection = clipping mask = layer mask (something which interests me greatly). I wonder if there are any other ways in which they're not the same.

Transparency in clipping masks

Hi everyone.
I need to clip a big area where some object have to stay at 100% of transparency and the rest at 10%.
Done that, i make a clipping mask and the transparency disappear, making all the objects at the same (100%)
Why?
Thanks.
Ben

Please show before and after.
Please include a screenshot of the layer panel (expanded so objects are visible)

Alter a gradient in a clipping mask...

I am working in Illustrator CS4 (or trying :)) and I need to alter a gradient color that was created with a clipping mask from process to spot color. I have tried doing it with some googled tutorials and nothing has worked for me...can someone please help me! It is probably really simple, but it has my 57 year old brain baffled. I tried to attach the EPS or PDF file, but it won't let me. Thank You!

If I understand your question correctly, try Control/right click & choose "Isolate Clipping Mask." I just tried this and was able to edit the gradient of the masked object.

Problems creating clipping masks

I have been trying to make some distressed letters I created into a clipping mask to place over a picture. The distressed text is outlined. Everytime I attempt to do this I end up completely hiding the photo I was attempting to make the mask for. I am using illustrator cs5. Does any one know of a good work around for this problem?

Select the outlined type and hit Cmd 8 to create a compound path, then create the clipping mask.
Or just do it with live type objects.

Does a Clipping Mask effect just one layer?

Hello everyone ... Level: Newbie OS: Win7 64bit Ia: Cs6
Once I use a Clipping Mask on a layer is the entire document covered in a mask?
And/or is all the artwork from then on inside the mask?
I've read about how to add and how to remove art from a mask. I've read about how to make and release and lots of other things.
So, then I went and found a lesson that contained the use of a Clipping Mask.
But I'm stuck... again.
I am suppose to Select the main shape and "just" copy it and move it down (doesn't say rather to Paste in front or back but I assumed in back ~ not that it has mattered thus far)
However, while making the main shape I used Gradient Mesh and used an Offset to create a "replica" and so when I go to Select the main shape the mesh is selected and so when I Paste (in back ~ seems most logical) and then move it down the details such as the colors of the Gradient and other such things are visible in front ~ ??
So, I have been trying to abate my problem in lots of different ways.
I have tried using the Pen tool to draw behind the main shape, I've tried making a New Layer and placing it above and below and inbetween the main shape layer, I've tried adding the artwork to the Mask ... I've tried everything I can think of and I've been through many an article in the manual and FAQ's to no avail.
I suppose, what I think I need to know ... is, how ... how on earth do I draw behind this main shape? Am I not able to do it becuase I am not getting behind the Mask?
(Let me apologise to those that HATE it when Newbies follow lessons/tuts and who HATE it when we come here to ask for help. I'm doing my best to learn and to find answers on my own before heading here for help)
Please lmk if you would be better able to help me with pictures of my layers and the art. Thanx so much for your time!!

Thanks as well for your patience with me! It can be difficult to communicate this way, but all we can do is try our best.
As for the issue regarding the author's "main shape"...
Here I have an object with a gradient mesh:
If you follow the directions in step 3 of the tutorial, the author creates a duplicate by going to Object > Path > Offset Path.
And then inputs "0" for the offset value.
I shifted my original gradient-meshed object down a little bit, and there you can see is the simple shape that you were seeing in the author's image. Then they just filled it with that gold gradient and scaled it down.
And as for clipping masks...
As I mentioned before, a clipping mask will only affect the objects and groups you had selected when you created it. For exhaustive information about clipping masks, see this link: http://helpx.adobe.com/illustrator/using/clipping-masks.html
I hope this was helpful! Good luck!

Illustrator clipping masks disappear in pdf from IDCS3

I just tried exporting a pdf from an InDesign CS3 document that contains an imported Illustrator-eps. In InDesign everything looks fine - but in the exported pdf some of the clipping masks (on tiff's) in the eps have disappeared.
I tried saving the Illustrator-eps as an Illustrator-pdf - now the exported pdf from IDCS3 is OK.
I tried switching to InDesign CS2 - keeping the old Illu-eps, and the exported pdf was OK.
Is there any way though that I can get IDCS3 to work with my old Illustrator-epses - so I don't have to open all of them and save as Illustrator-pdf? The idea of going back to IDCS2 isn't thrilling eather...

Is CS3 fully updated to 5.0.4? If so, and this is easily reproducible it
will never get fixed for CS3 so your workaround are all you have.
Bob

I have a line (stroke, no fill) and an eps graphic. I'm trying to make a clipping mask of the single line art but all it does is cut the eps graphic instead of making a mask?

I have an eps graphic and a single line drawing 2 pt wt. I'm trying to make a clipping mask of the line drawing. When I tried it all that happened was the eps graphic was cut in half. I did the exact steps from AdobeTV except the line drawing [pink camera.ai*@1200% (CMYK/Outline)] is an ai pen line drawing instead of a vector graphic and the other is [vector flower lillies.eps @ 100% (RGB/Preview)]. If you need more info on the graphics please tell me where to find it and I will send it.
This is all because the eps graphic has a white background. I have tried everything I know including opening it in Photoshop and deleting the background and it always pastes with a white background. My thought was if I can't change the background then maybe I can make a clipping mask of the pink camera and just paste it in front.
Please help this has been a thorn in my side for too long...

please post a screen shot of the graphic(s) as it's hard to understand exactly what you are asking
IF these are 'vector' graphics there should be no need for a clipping mask--also--if the .eps files are small (MB or KB) try posting one of those

Is there a tutorial on making a Mask,Or Clipping Mask for CS4?

I have imported a file of a sheet of music,and all I want is the sheet, not the background. Easy to do so in PS. I didn't know I could "print screen" directly into .AI and I've tried making a clipping mask so I could use the sheet as a background to no avail. Really appreciate the help.....thanks...mm

Let's see you can lock the art or image of the sheet music in the layers panel and the freely use the pen tool on top of it.
You can group if you wish the art for sheet music and then center that within the artboard then lock the grup in the layers panel and freely work ove the locked group.
you select that group and drag it into the symbols panel and make it a symbol and that would protect it even further and you also lock that symbol.
You can edit the art of the symbol without undoing the clipping path by editing the symbol.
Might be a good option.
The shape you make for the clipping mask ca be selected along with the and the option to aline to artboard chosen then center the two horizontally and vertical or just one direction.
Does this help?
Oh, yes once you have the masked art you can turn that art into a symbol s well place and position it anyway you want then if it has to be different fro the other sheets break the link to the parent symbol and make that a symbol as well.

Moving text after making a clipping mask?

After making a clipping mask with text I am able to move the image around that shows through the text, though how do you move the text around?
Thanks.

Each time I try to use the Move tool to move the Text Layer it ends up moving the Clipping Mask Layer instead.
Thanks.

[svn:fx-trunk] 11641: A simple fix - we need to keep track of the display list index for non-clipping masks such as luminosity masks , not just alpha masks.

Revision: 11641
Author:   [email protected]
Date:     2009-11-10 18:29:57 -0800 (Tue, 10 Nov 2009)
Log Message:
A simple fix - we need to keep track of the display list index for non-clipping masks such as luminosity masks, not just alpha masks.
QE notes: Please include tests for multiple graphic content nodes with masks under a .
Doc notes: N/A
Bugs:
SDK-24133 - Multiple non-Group maskees don't work when using maskType="luminosity"
Reviewer: Deepa
Tests run: Checkintests, Bug test case
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24133
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java

Revision: 11641
Author:   [email protected]
Date:     2009-11-10 18:29:57 -0800 (Tue, 10 Nov 2009)
Log Message:
A simple fix - we need to keep track of the display list index for non-clipping masks such as luminosity masks, not just alpha masks.
QE notes: Please include tests for multiple graphic content nodes with masks under a .
Doc notes: N/A
Bugs:
SDK-24133 - Multiple non-Group maskees don't work when using maskType="luminosity"
Reviewer: Deepa
Tests run: Checkintests, Bug test case
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24133
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java

Photoshop elements 6 help with making a clipping mask

I have a button template (for a pinback) I put into elements. What I would like to do is make a country flag button. Right now the flag image is sitting ontop of the template. I would like to make a clipping mask (I think that's what's it's called) so that the image covers the entire part of the button that will be seen when it is printed. Here is a link to a button. This is what I am trying to do, but am not having any luck. I would a appreciate a step by step guide. I am using photoshop elements 6 on a mac OSX (ver. 10.5.8
any help would be great
http://www.petergreenberg.com/wp-content/uploads/2008/11/canadian_flag.jpg

This is user to user tech support for folks having issues with Intel-based iMacs. This is not any kind of Adobe product support. If you need help with an Adobe product I suggest that you look for that help at the Adobe website.
Dah•veed

Trouble making a clipping mask in Photoshop

I have the following set up:
I would like to make a clipping mask out of all of the objects above the "Text" layer (so that all of the stuff from the above layers is only applied to the letters), however I am struggling. For one, when I go to ungroup "Group 1" it changes the complexion of the graphics and makes it darker for some reason. Also, when I merge the layers above "text" I get the following:
Anyone know how to accomplish this?

NM, I found the answer:
Place all the layers above "Text" into a group (it's okay to nest groups).
Ctl/Cmd-click on the Layers Panel thumbnail of "Text" to load it as a selection.
With your new "master group" targeted, click the "New Layer Mask" icon in the Layers Panel.
This will create a layer mask on the group that applies the group content only to the non-transparent pixel on the Text layer, which I think is what you're trying to do.

Clipping mask making everything just disappear

Similar Messages

Maybe you are looking for