Clips do not show up in the Project yet are present in timeline.

I have something weired going on. I have a timeline with a sequence that came from version 5.5 (had to ingest XML from FCP7 via PPro CS5.5 as the CS6 is too buggy and will not work with complex XML handling).
I have a few clips that are present in the timeline of the sequence and are playable, yet are not present in the project tab, making it impossible to project manage and to do offline workflows. When I click reveal in project nothing happens, manual search desn't do anything either.
Does anyone know anything about it?

You may not always be able to do things the way you want to do them, so if I can't solve the problem directly, I will usually suggest an alternate method that achieves the end goal - to get the job done so you can get paid. That alternate method may not be your preference, but if no one else can solve the problem either, it may be your only option. (Well, I suppose not getting paid is also an option, but I'm skeptical anyone would choose that one.)
I find the actual questions more important and don't usually pay attention to who's asking. So you're likely to have to put up with me further if you keep asking questions.

Similar Messages

I tried using the Filmstrip Theme for a podcast but when imported my Powerpoint slides as photos into iMovie they are not showing up in the project?? How can fix this??

I tried using the Filmstrip Theme to make a podcast and when I tried importing my Powerpoint slides as photos they are not showing up in the podcast, they are showing up as black or blank, how can I fix this??

This may help:
How to add a Powerpoint presentation to iMovie:
http://www.wikihow.com/Add-a-PowerPoint-to-iMovie

After "Replace with clip" the original clip can not be deleted from the project - why?

After using "replace with clip" to replace clip A in the timeline with a new clip B , clip A can not be deleted from the project anymore.
If you try to delete clip A, you get a warning, that it still has references in one or more sequences.
If you continue and delete clip A, it seems to be deleted - at first!
Unfortunately if you save and reopen the project, clip A is restored to folder "Recovered clips".
It's not possible to really delete it.
I also did not find a way to unlink clip B from A .
The only thing you can do, is to revert the change by "Restore Unrendered" in the clip context menu. But that's obviously not helping
I dont know if this is a bug or a feature. I understand, that it can be useful to undo the "replace clip" function, but why would anyone not want to be able to delete the original clip at all?
help how to fix this problem is greatly appreciated!
I use Premiere Pro CC 2014.2 (Win7 64bit)

I'm sure it has nothing to to with other sequences.
You can easily reproduce this behaviour:
1. create a new project
2. import 2 clips and name them "A" and "B"
3. put "A" in the timeline
4. ALT-drag "B" over "A" in the timeline (or right-click "A" in the timeline while selecting "B" in the project files and select "replace with clip ... from bin")
5. delete "A" from the project files
6. save and close project
7. reopen project
=> "A" reappears in "Recovered clips" and can not be deleted.

Imported files do not show up in the project menu

When I import files into a new folder I cannot locate them in the project menu. The files do not have a project path. They show up in the "last import" section though. What's wrong?

You cannot import files into an Aperture Folder. Folders hold containers (Folders, Projects, and Albums); they do not hold Images that are not in another container. Projects and Albums hold Images.
Right-click one of the Images shown in the "Last Import" Browser, and select "Show in Project" from the context menu. This should make that Project the active one, and show you which one it is by selecting it on the Library tab of the Inspector.

I tunes does not show all of the songs that are on my i pod

When I go to i tunes it does not show all the music that is on my ipod, since I got a new computer. I didn't change usernames or accounts or anything, how do I fix theis?

Where are you looking at in iTunes? Did you click the small black triangle next to your iPod under Devices in the left hand pane of iTunes to bring up a submenu of content. Click the on Music one. Is all of your content listed there?
B-rock

Imovie 9.0.9 will not show some of the still photos in project

when working on a imovie 9.0.9 project, some of my still photos from iphoto are not showing up in the project. I can drag the photo over and it appears in the project window but when I play the project some photos do not appear.

I have the same probelm with OSX 10.8.5 and the latest iMovie 9.0.9. iMovie will see most of the pics in the window but, infuriatingly, not some of the others - taken by the same camera on the day day!
The ones it can see, I can drag to the project window - get the green line, add or insert as appropriate and some will show when I play the new segment, and some won't. Some show in the project time line, but don't show up in the viewer when the line passes over them.
I have tried finalising, closing and opening both iMovie and iPhoto, deleting the pics in iPhoto and re importing them. I have been working on this for almost TWO DAYS and it's infuriating because nothing seems to be effective in fixing it, and there is no predicting as to which pics will "stick" and which one's won't.

Viewer does not show all of the clip

Import routine:
MTS format from Canon > Converting to Quicktime with Voltiac software. Resolution 1920x1080.
Impossible to set correct In and Out points in the Viewer as the whole clip is not shown. Can change the duration of the clip in the Timeline as the whole clip is shown there. After rendering there are no problems in the Canvas.
Anybody got a solution? Would be much appreciated!
Regards,
Tryg

I'd be converting to 1440x1080 because FCE does not support 1920 without rendering.
At any rate, why the whole clip does not show up in the Viewer and does in the Canvas eludes me.
Al

After transferring clips to Final Cut, they do not show up in the events library. They show up in the timeline of my project, though. how can I see then in the events browser?

After importing clips to Final Cut, they do not show up in the events library. Events from 2014 show up, but not 2015.They show up in the timeline of my project, though. How can I see them in the events browser?

TThose aren't bins. Those are just groupings based on when the content was created or any other selected parameter. Use the action popup in the toolbar tho change the setting.

Compound clip imported into project not showing up in the event browser

I have learnt that when one imports any clip into the project from anywhere else other than its associated event folder, the new clip also gets automatically added into the event folder. I have seen this occur when I had imported audio from the music browser onto my timeline directly.
Today I happened to place a compound clip [a common template which I use for introduction to the video] onto the beginning of a project which I have started recently. I broke the compound clip apart and made the necessary edits. What puzzles me is that this compound clip has an audio clip and this clip was not being shown in the event browser. Is this normal?
Ps. I have very recently updated my FCPX from version 2 to 5.
DR.SOMANNA

Let me explain the matter in a different way...
I have made a compound clip of the intitial generator clip, titles and music clip which I had used for my first project. The intention to do so being that I could reuse the same for my future projects as well. I placed this compound clip in a new project which I named as templates.
When I had started upon a new project a few days ago, I copied and pasted this compound clip from the 'templates project' and added it to the beginning of the timeline of the new project.
Now, for purposes of editing the titles, I broke apart the compound clip and changed the text of the titles. Also, when I had ungrouped the compound clip, there did appear the music clip below the timeline. I know that clips imported from the generator browser and the titles that are added to the project do not show up in the events browser, but should not the audio clip make its appearance in the event browser? I know that when we add an audio from the music browser, this audio clip will be automatically shown in the event browser.
My question therefore is this: is an audio track that gets added to the timeline of a project via a compound clip that has been added and ungrouped on the timeline an exception to the rule?
Hope I have made myself clear.
DR.SOMANNA

Entire frame of mini-dv video clips do NOT show in the iMovie '11 viewer in playback mode

I am editing a wedding video in iMovie11 that was recorded on a mini dv tape. When I move video clips from the event library to the timeline, the entire frame is displayed in the timeline. However, the entire frame of the video clip does NOT show in the iMovie viewer or when I playback the video. I exported the video and burned it to a dvd using Toast 11 pro. The video recorded to the dvd as it was showing in the iMovie viewer... the full frame does not show. I would certainly appreciate any advice as to how to solve my problem. THANK YOU!!!

Is your video shot in 16:9 aspect ratio or 4:3?
You can go to File/Project Properties and set the aspect ratio for the project.
When you get a clip that does not match the project's aspect ratio, you use the Rotate, Crop, Ken Burns tool on the middle toolbar to specify how it should be treated.
FIT will place the entire clip in the movie, and will letterbox (black bars) so that it fits.
CROP will fill the screen, but will cut off the top and bottom of your frame.

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Photos not showing up in iMovie project after transferring project to external hard drive

I just finished moving my iMovie '11 projects and events to an external hard drive. In one particular project (the only one I've used photos in), the photos will not play back when I watch it in the preview window. The picture shows up in the project editing window, but during playback the computer seems to use the last frame of the last played video. All of the previous settings are the same, it will just not show the pictures. I've tried re-inserting them, even trying different pictures that were not used originally, but nothing seems to work. I've also tried closing iMovie and restarting it, but no luck.

Hi all
I am having the same problem - all a bit wierd. Yesterday I could drag and drop images from finder into my project. Today, I can drag andf drop the images from finder and they display in the project - but not when it is played.
I tried importing the images into iphoto and dragging them from the media selection window - still no joy - I can see them in the proejct - but they just don't show when played.
Is it because the project has been marked as finished in some way - although I haven't finalised it?
Any help appreciated.
Thanks

Iphotos not showing up in iMovie project

I am dragging my photos from iphoto into iMovie to add to a new project. Then when I play the project, they are not showing up. What is going wrong?

Hi all
I am having the same problem - all a bit wierd. Yesterday I could drag and drop images from finder into my project. Today, I can drag andf drop the images from finder and they display in the project - but not when it is played.
I tried importing the images into iphoto and dragging them from the media selection window - still no joy - I can see them in the proejct - but they just don't show when played.
Is it because the project has been marked as finished in some way - although I haven't finalised it?
Any help appreciated.
Thanks

Crystal Report Viewer icons do not show in Web Application Project in VS2005 (Web Site Project OK)

Post Author: jsdude99
CA Forum: Crystal Reports
Hi,
With Visual Studio 2005, the Icons at the top of the CrystalReportViewer do not show on Web Application Project. However, If I have a web site project, they are all shown. Please note that I found number of posts that people not seeing the icons after the deployment but my case is the development environment. Once I pass the first hurdle I may face further problems like the other people, so If you happen to know answers in both situations, please share your knowlegde..
PS: I created two new types of projetcs and have just a CrystalReportViewer on the default page. Data is shown fine but the icons are missing (red X placeholders instead of icons) in Web Application Project. Very straight forward test.

We havent tried that. We changed the link in the web part to access an html page that claims that the report is loading. It states in the html that if the page doesnt load to "click here" which redirects to the crystalreportviewer. Its a temp fix for it. One thing we are looking at is the 64 bit version of the Sharepoint integration kit. That may contain a reportviewer webpart.
Thanks for the reply.
Brian

"could not open score because the project has no audio files"?

I just purchased the urban bundle from Resource Central, and uploaded it in "Bridge", I double-clicked the "sbst" file
to import to soundbooth and I get this, "could not open score because the project has no audio files"? when I single
click it in bridge the audio plays fine and shows the 4.61 file size, so there are audio files, can you tell me whats
going on?

I FOLLOWED EVERYTHING YOU SAID, AND IT WORKED LIKE A CHARM
YOU ARE TRULY A PROFESSIONAL AND A SCOLAR!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
MUCHO THANKS. THANKS FOR NOT GIVING UP ON ME. YOU ARE THE
BEST!!! I GUESS MY PREVIOUS EXTRACTION THE FIRST TIME I TRIED
DID NOT WORK, BUT FOLLOWING YOUR STEPS GOT IT GOING.
THANK YOU ONCE AGAIN, NOW I NEED TO GO SEE "DOCTOR BOSLEY"
FOR SOME HAIR REPLACEMENT BECAUSE I PULLED IT ALL OUT TRYING
TO FIGURE OUT WHAT THE HELL I WAS DOING WRONG. THANKS AGAIN BRO.

Clips do not show up in the Project yet are present in timeline.

Similar Messages

Maybe you are looking for