Clips Don't Start at 00:00:00:00 in Source Panel

When I bring most of my clips into the source panel, the timer starts at 00:00:00:00. But on some of the clips, the timer starts at a value like 00:05:24:12. This is bothersome because I need for it to start at 00:00:00:00 because when reviewing the clips before bringing them into Premiere Pro, I make a note (on a piece of paper) where certain things happen in the clips. I need to be able to rely on this offset when I bring the clip into PP. In 90% of the cases the timer does start at 00:00:00:00 but for 10%, the timer has some other non-zero numbers. What can I do to get all of the clips to start at zero. Note: I do not alter in any way the clips before viewing them in PP. I simply look at them in Windows Media Player or VCL Media Player.

You're better off doing this work in PP itself. This is precisely the purpose of the Source Monitor. From there you can even use Markers for you notes and forgo the pen and paper.

Similar Messages

Downloaded songs don't start at the beginning of the song, why?

the songs i bought from itunes don't start at the beginning of the song, it's just the preview clip.

Been having the same problems myself. And I don't know about you but sometimes it'll take a while to get it to actually play the first song.

After IOS 8 upgrade IPad 2 don't start

Hi,
After IOS 8 upgrade my IPad 2 don't start and just show this screen and nothing works.

My ipad2 is having the same problem. I can get it to start up by plugging the charger in. I can then unplug it and it is working - but very slow and prone to randomly shutting things down.

After add (in a wrong way) a new disk in ASM, cluster don´t start

Hi,
Environment:
Oracle RAC 10gR2
2 nodes windows 2003 advanced server (node1 called "database1" and node2 called "database2").
ASM
san storage
Case:
My client has tried to add a new disk (in a environment san) in ASM with the next steps:
1. database1 and database2 are up.
2. instance ASM1 from database is up and instance ASM2 from database2 is down (I don´t know why¿¿¿¿¿¿¿??????????).
3. add a new disc from san storage to instance ASM1. At the end, a lot of errors show in screen due to instance ASM2 was down.
4. client tried to up +ASM2 and then , all the cluster crashed.
5. reboot boths nodes database1 and database2 , and Windows 2003 Server don´t start well (hung up, due to services from oracle cluster are "automatically start"-
6. disable oracle services in "not automatically start" and windows 2003 server start well.
7. now oracle rac don´t start, ASM don start, instances don´t start ....
what can I do? any idea?
Regards.
Laura

Did you try to bring the U1 and it's associated ASM instance up while the other node is shutdown? Are you using Oracle clusterware?

Reports Multi-tier server from Dev 2000:v 1.6.1 don't start on solaris 8

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

WEB.SHOW_DOCUMENT don´t start Firefox 3.5

Hi @all,
I want to call a report through Forms per web.show_document but Firefox don´t start. The URL is correct (I´ve tested it). I tried also to disable the Popup-Blocker but this didn´t solve the problem, too.
I call the fmx with a JNLP File.
There is no other browser installed on my system.
Are there any other settings in the browser (or maybe in the OS (WinXPPro SP3)) which could be responsible for this problem.
Thanks for your suggestions.
Thomas

Hi,
no, I run my forms in a Java Virtual Machine ( I start it with a JNLP-File) not directly in a browser. Adobe 9 is installed. In "showmyjobs" there are no report jobs listed, because the browser don´t start and try to open the report. When I copy manually the URL (which should call the report) from web.show_document into the browser the report starts. There is no problem in calling the report.
The problem is that web.show_document don´t start the browser or if the browser is already open a new tab to call the URL which I have written in web.show_document.
e.g.
web.show_document('http://www.google.de'. '_blank') should call google in a new browser tab or, if the browser is not opened already, in a new browser. But in my case the browser don´t start or don´t start a new tab page. This problem occurs in IE and in Firefox.
I use JDK 6 Update 16 and Forms works fine with that version.
I´ll try it tomorrow with another Java Version but I don´t think that this solve the problem.
Thomas

Oracle 8.1.7 on windows 2000 don't start automatic :(

Why Oracle 8.1.7 don't start automatic on windows 2000 :(
Services
Oracleora3Agent
Oracleora3DataGatherer
Oracleora3TNSListener
OracleServiceORA3
are started autamatic. (ora3 is SID)
if I execute command "startup open" in Server Manager (svrmgrl), then DataBase started

I've got the same problem.
However, I've found that if I set the OracleServiceXXX startup to manual, If I then issue a net start statement it works OK.
i.e NET START OracleServiceXXX
Hope this helps.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

I have FCE 4.0.1 and running OS x 10.7.5 when i burn my movie the audio from my movie clips don't come through . My Sound effects and music can be heard. First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it. everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

Try Mixing Down the audio before export.
This info may help;
https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
Also serch this forum for Mix Down you should find lots of info.
Al

Java Apps don't start automaticaly after system restart

Hi,
Since a few days ago when restarting Java application servers of SAP
Portal, the applications deployed don't start for itselfs.
When starting the instance, the memory stops to increase at 500mb. The
only way to start the applications is by the manual way in:
Server -> Services -> Deploy -> Runtime -> Application -> Start
Application.
After starting the applications manually the instance starts fine.
I already increased some values in global configuration:
From:
InitialThreadCount = 40
MaxThreadCount = 150
MinThreadCount = 40
To:
InitialThreadCount = 80
MaxThreadCount = 200
MinThreadCount = 80
After the restart the applications are not starting automaticaly yet.
I have 4 instances. The first two instances are starting fine, but the problem is happening with the other 2 instances.
Is there any reason for this type of behavior?
Thanks for the help
Pedro Nunes

Hello Vyara,
thanks for your reply.
This kind of problem happens since 3 weeks ago and the stack of this system (SP09) remain unchangeble since 07.04.2008.
The strange behavior is that the Server 1 and 2 are starting all the apps fine, but this problem is only happens in server 3 and 4.
Can you help please?
Thanks

9iAS Release 2 (some) components don't start

Component that don't start (Forms, DAS, ...)
In oidmon.log is ...
2002/12/06:12:11:34Failed to fetch Process Table. ORA-12571: TNS:packet writer failure
2002/12/06:12:11:34Error connecting database. 12571
2002/12/06:12:11:34Error : Guardian Process terminated
2002/12/06:12:13:03NLS_LANG set to SLOVENIAN_SLOVENIA.EE8MSWIN1250
2002/12/06:12:13:03Resetting NLS_LANG to SLOVENIAN_SLOVENIA.UTF8
2002/12/06:12:13:03Starting Monitor Process, PID=1260
2002/12/06:12:13:03ORACLE_SID not set, setting to iasdb
2002/12/06:12:13:52[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
2002/12/06:12:13:52[Oidmon]: Unable to connect to database, will retry after 20 sec
2002/12/06:12:14:13[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
2002/12/06:12:14:13[Oidmon]: Unable to connect to database, will retry after 20 sec
2002/12/06:12:14:33[gsdsiConnect] ORA-1033, ORA-01033: ORACLE initialization or shutdown in progress
2002/12/06:12:14:33[Oidmon]: Unable to connect to database, will retry after 20 sec
2002/12/06:12:14:54OIDLDAPD Instance 1 is not running....
2002/12/06:12:14:57OIDLDAPD Instance 1 deleted from registry
2002/12/06:12:14:57Restarting OIDLDAPD Instance 1
2002/12/06:12:14:58Updating Process Table...
2002/12/06:12:14:58Updated Retry Count
2002/12/06:12:14:58OIDLDAPD Instance 1 added into registry
2002/12/06:12:14:58Updating Process Table...
2002/12/06:12:14:58exit run
Are this errors cause for not starting components, and how can I correct this ?
thanks

I could be wrong but...
1) Is the TNS listener running? (and then a DB instance)
2) Is the default SID (iasdb) correct? You might like to set the sid before you start.
3) I had loads of problems after I accidentally tried starting emctl as root. I changed the ownership of everything back to oracle:dba and then started it as oracle and all was well.
Maybe useful, maybe not?

FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

Please help ASAP.
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
Thanks,
MV

What is your source material? Is it H.264? FCP does not work correctly with that material.
Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
MtD

[Solved] Libreoffice 3.6.1.4 don't start

Hello,
please excuse my bad english.
I have a problem. Since the libreoffice update from 3.5.6 to 3.6.1.4 libreoffice don't start. For a short time i see the splash-screen and that's it. In the terminal, when i type soffice or lowriter or libreoffice --writer i can't see any message. Also i deleted the ~/.config/libreoffice folder. But that doesn't help. These packages are installed: libreoffice-common libreoffice-gnome libreoffice-de libreoffice-writer libreoffice-calc. When i downgrade to 3.5.6 everything is fine.
I have a laptop with openbox and a desktop-pc with gnome. Same problem on both systems.
Do you have any tip for me?
Thanks Michael
Last edited by Süerländer (2012-09-13 07:01:16)

Experiencing the same problem here though I found out that the reason for LibreOffice to crash/segfault is the existence of a aquabase-language-support.ttf file which as far as I remember was perfectly accepted in previous versions.
Once I remove it from my .fonts folder LibreOffice loads as it should (no deep testing performed though).
Therefore, in case you are using a .fonts folder on my behalf I would suggest to check out its content (back it up and empty the folder and add the fonts again one by one checking each time if LibreOffice crashes or not until you find which of them may be the reason for the crash).

After upgrading PSE 11 to PSE 12 Editor don't start Organizer do

After downloading and installing PSE 12 (several times) Organizer start, but Editor don't start.
While installing there are no visable error messages.
Cotim

The issue is still there.
I am using Elements 11 until Elements 12 works. (I have to do my job)
I have several times uninstall Elements 12 (incl preferences) and reinstall the programma. (8-9 times)
During downloading and installing I closed the virusscanner and the firewall. No Error messages
Elements 11 is an upgrade of Elements 9 and working OK.
The following logfiles ended with EXIT code: 0-No Error
EO12 AMTLib Support 12.0 12-18-2013.log.gz                         3.976 18-12-2013 04
PSE12 AMTLib Support 12.0 12-18-2013.log.gz                       3.975 18-12-2013 08
PSE12 STI Installer 12.0 12-18-2013.log.gz                              6.355 18-12-2013 10
Is downloading the full system maybe a solution?

My nokia N75 don't start

i power the phone and look like it download the software but a few seconds later a message pop ups "The phone don't start, contact the seller.

Try remove the battery for a few minutes,if the same happens again return it to a nokia care center.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

My ipod touch don't start

My ipod don't start. Screen show Apple logo and flashes. I try to restart holding main button and select button and nothing happen. Thanks

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, go here.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Clips Don't Start at 00:00:00:00 in Source Panel

Similar Messages

Maybe you are looking for