Clips moving visually when zoomed in with mouse movement

Hello,
I am experiencing a glitch with the visual placement of the clips in Final Cut Pro X.
When I zoom in to the maximum level, the audio and video clips move visually. I can therefore not determine their exact alignment. When I move the mouse over the clips (a physical mouse by Logitech) without touching any other controls, the clips stutter around, and shift their apparent location.
I am using a brand new, maxed-out iMac and have restarted the program, and computer several times. This happens in all of my projects and not just the project in which I first noticed the problem.
Has anyone else encountered this problem?

BillMilgram wrote:
With the OS Update to OSX 10.8.4, this problem went away.
Luis, it is a 2013 27" iMac with a 3.4 GHz i7, 32 GB of 1600 MHz DDR3 ram, an NVIDIA Geforce GTX 680MX 2048 MB, and has the 768 GB SSD drive.
Thanks for your replies guys!
I am glad the problem was solved. My guess is that the update included a new driver for the graphics card that may have solved some bugs.

Similar Messages

I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Display Jitters with Mouse movement. Any ideas?

Cinema 23 HD Display jitters with mouse movement.
This just started happening. I don't know what's causing it, but my display jitters back and forth with mouse movement. Left and right. As I move the mouse the screen moves two pixels to the right or left when I move the mouse. After 2 pixels it stops.
Very irritating.
I don't have any extra displays to determine if its the card or the display.
Thanks in advance for any insight.
Radeon 9600 Pro 128Meg RAM Cinema 23 HD Display

Hi-
Sounds like you may have accidentally turned on "Zoom".
Open System Preferences/Universal Access. Turn off "Zoom", and things should be normal again.

On my Cinema Display the screen is blurry and shifts with mouse movement.

I have had this screen for a year and a half and only use it once a week in my remote office. This morning I noticed blurring on the screen and the whole screen shifts up/down, left/right with mouse movement. Please help. I am getting a headache.
Thanks In Advance,
Rob

Press Command-Option-8 once or twice.
You have Zoom on. It is controlled in "Seeing" in "Universal Access" system preference, and by Control-Scrollwheel.

Why my file suddenly closed with mouse movement?

Why my open pdf file suddenly closed with mouse movement, it happened all the time when I open a pdf file. Please help! anyone know the solution?

Hi ntsai01,
Does this happen with all PDFs or any specific one?
Where are you trying to open the PDF, on a local drive or via some email, etc.?
Regards,
Anubha

I get different result when I paste with mouse and shift+ins

Sometimes I get different result when I paste the clipboard content with mouse and shift+insert key combination. Why? What can I do to stop this annoyance?

Just to add a little to the above, there really is no universally applied standard (not even close) for how the primary, secondary, and clipboard buffers should be used. Any X program can use them however they wish. But there are some common patterns: selected text should be placed in the primary buffer, and X pastes from the primary buffer with either middle click or shift-ins by default.
This default can (and unfortunately often is) overriden by clipboard managers - I don't know why they don't stay true to their name and just manage the clipboard buffer, but they often don't.
<mini rant>with no clipboard tools installed, selected text in any program I have is in the primary selection, and shift+ins or middle click paste from this primary selection. Ctrl-C/Ctrl-V post to/from the clipboard buffer. No need for extra tools. If I install any clipboard manager, this default sanity of X11 goes strait to s(&*Y. I don't like clipboard managers </mini rant> <mini praise> X11 is great without any of that cruft added </mini praise>
Last edited by Trilby (2013-06-15 03:12:39)

Unwanted Mission control openings with mouse movement

Many times Mission Control will open when I make a fast movement up or down with Magic Mouse. It's happening more and more, and very annoying.
ais there any way to turn it off? I can't figure out what iscausing it. Thanks - Rick

It's caused by a double-tap with two fingers on top of the Mouse.
You can turn it off in System Preferences > Mouse > More Gestures tab > uncheck Mission Control.
Regards,
Captfred

How to create Image gallery with mouse move effect

Hello frndz
Please give me any link or flash file which explain how to apply mouse move efect on images of gallery.
i mean image sof gallery simply move with mosue direction and stop on mouse stop.its very urgent please help me out
Thanks and Regards
Vineet osho

Try this:
http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7d00.html

Blacks are Clipping in Aperture when zoomed in?

My monitor (iMac 20", last Matte generation) is calibrated using the Huey, and it works great except for this one problem, in which Raw files are displayed with some sort of black clipping when viewed at 100% or full screen size. However, the correct blacks can be seen in the Loupe, here is an example:
http://i169.photobucket.com/albums/u219/snwyatt/ApertureProblem1.jpg
I have been plagued by this in every version of Aperture since 1.5.x to the newest, 2.0.1. The problem has been narrowed down to the Huey profile, and how it is read by Aperture, because every other profile (default iMac, manually calibrated iMac, etc) has proper consistency between the all levels of zoom and the loupe.
It doesn't look too bad in these images, but it also leads to harsh gradients and extra noise, which are a hassle to deal with. The images show the proper blacks when exported as a Tiff or other jpeg. And it is not the Raw file format (.cr2), it does the same thing with every Raw format I've thrown at it.
Any suggestions? The colours are spot on with the Huey and I love Aperture, but this issue has been driving me nuts.

2.2 gamma is fine for monitor calibration with Aperture (it's even what Apple/Aperture recommends).
Your problem may be tied into the type of monitor profile you are creating. I had an issue in 2006 with Aperture v1.1.x. It turned out that Aperture was fine with Matrix monitor profiles but it did not like LUT monitor profiles.
When I created a LUT monitor profile then I got shadows blocking up and posterizing in Aperture.
I have not checked to see if this problem was corrected in 10.5 or in Aperture 2.0, possibly not because it sounds like what you are describing.
Here's the thread from last spring:
http://discussions.apple.com/thread.jspa?threadID=469271&tstart=0
As I recall from the time too (in other threads on the forum) there where issues with the Huey that Shea is describing. It only created LUT type profiles and did not have options in its software (Spring, '06) for matrix type profiles.
For example, a MacBeth/X-Rite Eye-one Photo with Eye-one Match 3.6.x gives you the option to output either Matrix display profiles (the default) or LUT display profiles.

Incorrect Focus when Changing Item with Mouse

Dear Colleague,
Quite often, when the user navigates to a new item with the mouse and not with the keyboard (e.g. Tab key) or explicitly via the toolbar item (next item), then the cursor ends up in the item of interest, but when the user proceeds to, for example, activate the associated LOV, then the cursor focus switches back to the original, i.e. previous item.
Is this a known bug? I would appreciate any tips here.
My forms are running within Oracle AS 10g.
Best regards,
Randy

Dear Wilfred,
In the meantime, I did in fact find something in MetaLink, namely:
Note: 292045.1
Subject: Cursor Focus Is Lost After Using Alt+W To Switch Between Windows in Oracle Forms
Cause: The problem is caused by a forms bug:
The bug is fixed in OracleAS 10g / Oracle Developer Suite 10g Rel 2 (not due for release until March / April 2005)
There is no backport one off fixes available for Forms 6i, 9i or 10g (Rel 1). For these releases, the user must work-around by manually clicking in the window / field in order for cursor focus to be returned, and keyboard input to be accepted again.
References: Bug 3788158 - Cursor Focus Lost When Moving Between Forms Using Window Menu
Wilfred,
Does this mean that no bugfix is planned for Releases prior to 10g (Rel 2)? Which ultimately requires an upgrade to this release, if one wants to avoid this?
I would appreciate your interpretation on this.
Thanks,
Randy

Why does the color change in my forms when I hover with mouse?

I have cgi script with several forms.
The default font color on my forms is black.
On new firefox, when I hover the form area with my mouse the fonts turn green. Why?

Hi Tara ,
Please refer to the following links and see how it goes .
https://helpx.adobe.com/acrobat/using/advanced-pdf-print-settings.html
http://docs.oracle.com/cd/E19728-01/820-2550/printing_pdffonts.html
Regards
Sukrit Dhingra

After updating to 9.0.1, the drop-down Bookmarks list "freezes" open when I hover with mouse on any entry. Have to start over if I land on the wrong bookmark (I have imac w OSX 10.5.8)

To clarify, I'm talking about the toolbar at the very top of the screen (After the Apple icon, it's File, Edit View, History, Bookmarks, Tools, Window and Help) If I move the mouse to the "Bookmarks" choice I get the same drop down menu as before, i.e., "Show all bookmarks", Bookmark this page, etc.
What's different is that if I hover the mouse on a bookmark folder that has more than one entry, that folder comes to the front and stays there. I have to move the mouse back to the top of the page to "unfreeze" so I can choose another bookmark. It never worked this way before, and I didn't make any other changes except updating to 9.0.1.
Any ideas?

duringnieux pierre wrote:
if you got an external drive , try install a system on it then boot from it ( in that way your internal drive act as an external drive , then you can backup your files )
Firstly IF I have an un-bootable install, why would it suddenly become bootable if I used it externally rather than internally?
Anyways I tried to Create Image from my Macintosh HD and save it to external, and got this error:
"Unable to Create: input/output error"
This happened twice. I am about to use a different external HD, one which also has more space.
And Klaus,
I did read through the links you supplied. In the first link there is a giant list of all the files the archive function backs up. It backs up a lot, but not quite everything. If it backed up everything, they could just say "everything".
The directory I'm concerned with is the /Applications one. It seems the only things backed up in this directory are specific Apple apps, for exapmple:
/Applications/Chess.app
/Applications/Clock.app
/Applications/DVD Player.app
/Applications/Extras/BlastApp.app
I have many many GB worth of other apps I'd love to be able to load back up, rather than spend hours re-installing them.
But I will try to use the Archive and Install feature though, once I have safely backed up my files. I found this on the Apple site also:
Archive and Install installations require the largest amount of available disk space because you need to have room to preserve your existing System and the new one you are installing
On my 250GB HD, my installation uses 200GB, and I only have about 40GB free. Will Archive and Install be able to work with this little space?
Thanks

Clip is stuttering when slowing down with timewarp

I have some footage that I am slowing to 25% with timewarp on the default settings. For some reason when I review the warped footage its all nice and smooth except for this 1 frame pause about every 3 seconds. Has anyone else experienced this and know a work around?
Thanks

You will need to enable frame blending or use the timewarp effect. The program simply doubles some frames because you told it to stretch out 1 frame across 1.25 frames and eventually there wil lbe a gap unless smarter methods will be used. Simple math.
Mylenium

Enemies not being removed from stage when clicked on with mouse.

I have ran into another problem, I have written the code for when I click on an enemy, it doesnt add a point to the score and it doesn't remove the enemy, I have a textfield which is called messageDisplay which is linked to the clickEnemy function.
Here is the piece of code.
stage.addEventListener(MouseEvent.CLICK, clickEnemy);
                function clickEnemy(event:MouseEvent):void
                if(cursor.hitTestObject(enemyAppear))
                        score++
                        messageDisplay.text = String(score);
                        enemyAppear.parent.removeChild(enemyAppear);
                stage.removeEventListener(MouseEvent.CLICK, clickEnemy);
Any help is appreciated, thanks Casey.

After double checking my code I have resolved the issue myself thanks

Icons occasionally disappear when clicked on with mouse

The Case of the Disappearing Icons:
From day one on my new iMac, icons of all types (folder, document, image, etc.) occasionally disappear either from the desktop or from an open folder. I can usually get the icon to reappear by doing the following:
1) clicking on "Get Info" for the file;
2) looking at the thumbnail of the lost icon (invariably the thumbnail in "Get Info" appears as a thumbnail of the icon used by the Macintosh HD);
3) selecting the incorrect HD thumbnail in "Get Info" and then hitting the delete key. Bingo! The missing icon then reappears in its correct form both in "Get Info" and in its location within the folder or on the desktop.
Alternatively, I can force-quit the Finder to correct the icons.
However, when a custom icon or a photo thumbnail disappear, I cannot get them back using the procedures above -- they're gone for good.
This is a continual and annoying problem; it happens maybe five times per day. It is unlikely to be a file conflict, because it began happening to my iMac right out of the box -- before I installed any of my apps. I did the usual stuff -- Disk First Aid, Repair Permissions -- no luck. Anybody else have this problem? Any of you Sherlocks out there know of an "elementary" solution?

After double checking my code I have resolved the issue myself thanks

Clips moving visually when zoomed in with mouse movement

Similar Messages

Maybe you are looking for