Clips when imported turned into slow motion while audio runs normally ahead
Im importing videos from my phone to imovies the first few videos imported fine with no problem. The last few videos i imported when i import them they are elongated in length and slowed down in speed while the audio runs normally ahead of the video. For example i imported a 57 sec video which got elongated to 2+ mins and the audio runs ahead of the video ending at 57 seconds. What can i do to have the video imported as it is?
i think it does this because it is trying to get rid of shaking! if that is any help! any ideas??
Similar Messages
-
All of a sudden when I view a file that's been downloaded, or viewed on line, whether in Windows Media, or on You Tube on line site, or Power DVD Play program, the image appears as if it was in a slow motion "strobe" effect, while the audio sounds consistent, (barring the frequent stalls). If I burn a DVD, it has the slow motion strobe effect burnt into the disc as well & is difficult to view on a DVD player. Is this a plug-in problem that has suddenly manifested, and is there a way of getting the system back to it's normal operation??
== This happened ==
Every time Firefox opened
== Since about 2 weeks ago.Hello Joe.
Try disabling all add-ons (that's extensions, plugins and themes, go into ''Tools > Add-ons'') except for Flash and see if the problem persists. If they don't, enable one add-on at a time until you find the problem. If they do, try a new [http://support.mozilla.com/en-US/kb/Managing+profiles Firefox profile] and see if it has the same issues. If it does (make sure other plugins aren't enabled), you need to contact Adobe for support on their Flash plugin ([https://www.mozilla.com/en-US/plugincheck/ updating] it will be the first thing they tell you to do). If it doesn't, please tell me. -
Editing: How to turn a clip into slow motion
Is it possible to turn a clip into slow motion?
Message was edited by: jthfourYes.
Use Modify>Speed. (Command-J)
Set the % to less than 100. eg 50% is half speed, 25% quarter and so on.
Check the Frame Blending box.
Al -
when importing files into fcpx from go pro hero2, some are importing as .mov and some as .mp4. when making a multi cam clip it will only add one type, if you try and add the other it says camera clip cannot be processed. need to figure out why it randomly imports differently, or how to add different file tyoes to multi cam.
here is one that is imported and stays .mp4. the specs are same as original file before import.
here is one that has changed somehow during import. specs on original file are same as above, but once it is imported it changes to this in event folder, and others randomly keep the above specs. -
When the sound goes into slow motion, the only way to resolve this is to perform a Windows restore.
But there must be a way to keep this from happening.
I'm using Windows XP Home Edition Version 2002 service pack 3 and iTunes 10.5.2.11.
Not only are the songs in iTunes playing slow, but so are all sounds, including Windows sounds.That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific) -
Mac pro running OS 10.5.8 won't boot. Apple logo and spinning wheel shows then Apple logo turns into Forbidden signage while spinning wheel continue. It happenened right after I installed a firmware. Had to restart.Please help. What can I do?
Work through the suggestions in this article:
Mac OS X: Gray screen appears during startup -
When importing images into LR5 on my laptop, the photos all have a wide yellow streak through them. This only happens on the laptop; I can import the images onto my desktop LR and there isn't the streak of colour. Can someone help?
This is happening even with photos that were taken on another camera, not just mine. My daughter told me that the laptop recently fell. The yellow streak is not anywhere else on the laptop, just on the photos in LR.I have had this problem on my desktop. I have been attempting to reproduce it where it can be debugged. Here are some observations/facts in my environment--no conclusions:
1. I do not import from camera or memory stick directly into LR. I copy all images (using Explorer) from camera to two different locations (backup location first); and then my working area. In both cases, after files are copied I mark them Read-only.
2. Poor observation, but in any event: the issue has only occurred when I do a large number of images. Its a poor observation as I have no exact number. I suspect when I do less than 50 always works well every time. However, I have also done some very large imports without issue.
3. Error only occurs with my RAW images--for me that's NEF. I have multiple cameras--those that only capture jpg images have never had an issue in LR.
4. Even if the file is marked Read Only issues can still occur. I then remove the image from the disk using LR -- and then manually (Explorer) copy in my backup image -- re import again and all is well. I think one time I exited LR and replaced the bad file with a backup and restarted LR and all was well again.
5. When it occurs I have performed a HASH value on the broken file and on the backed up file to determine if the file contents has changed--and each time the file contents has changed.
6. I have had this occur immediately after import, but most often it occurs like this... import large number of images; Make changes in Development Module on random image, export jpg of changes--exit LR. Open up LR and file is corrupted.
7. I have had this issue on multiple USB drives ( okay just 2 different drives have been tested ).
What next--fire up Process Monitor and monitor the system (specifically LR) to see if it reports any file open for write access when this occurs. So, far I have not had process monitor actually running when it occurs--one of these days. -
When importing CDs into i-tunes should the artwork be there automatically. If not how do I get artwork to show in i-tunes and on my ipod. I had artwork with a PC but now I have a mac artwork does not appear.
I don't use iTunes's "fetch artwork", so I'm not 100% sure, but unless you are signed in to your iTunes account, artwork is not automatic. Even then, iTunes doesn't always find it.
You can copy-and-paste artwork from the inernet, either Amazon or Google. I use 300x300 pixel images.
For the future, if you have iTunes questions, you might be better off posting them in the iTunes for Mac forum, this is iTunes for Windows. In this situation, it doesn't make any difference, but next time maybe it will. -
When importing Raw into A3, in what format is the picture displayed? Jpeg or tiff.
When importing Raw into A3, in what format is the picture displayed on the screen? Jpeg or Tiff ?
None of the comments you have gotten are particularly useful. The display is independent of format of the file. It's rendering is of the full pixels in the image file that you have imported, modified by any adjustments you have made, or not if you ask to see the Master.
Even if your Master was imported as a JPEG, as seen on the screen it would have been decompressed, and you would see all the pixels (that the screen is capable of). However, a JPEG may have lost some detail in the compression, but when decompressed has the same number of pixels as the equivalent uncompressed photo format -- but some of them may result from interpolation, and not be the original.
Ernie -
When importing photos into iPhoto I get an error Unreadable Files:
When importing photos into iPhoto I get an error Unreadable Files: The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).
I can open the JPG in question with PREVIEW, photoshop etc.. actually if I try to import a photo that I had originally imported it also fails..
Please help... Thank you..I too had this error message (and to be honest, it was becoming a bit of a pain). I resolved it in a slightly different way to Terence.
I had 10 photos that were allegedly unreadable; however, as Terence rightly says, they are duplicates. When I opened iPhoto I mad a note of each of the files concerned and did a Spotlight search throughout my hard drive.
For each photo, there were four or five duplicates. I deleted all but one of each of the photos and then reopened iPhoto. No more error message.
The original problem stemmed from importing my files directly from an external device I was using with a previous computer [that was running XP].
Anyway, hope this helps.
Andy -
Audio-yes, Video-no (totally black) when importing .mov into FCP X, please help!
Hello
I am trying to import some .mov files into Final Cut Pro X. The files were originally .RTS, shot from a Canon XHA1 in 1080i, I converted them to .mov using SmartConverter and they play absolutely fine in Quicktime. However, when I import them into FCP X, the audio plays fine, but the video just shows a black screen. The codecs of the .mov files are standard H.264/AAC. My other .mov files (from the same camera that were shot in 1080p instead of 1080i) import fine into FCP.
Any advice would be greatly appreciated!
Laura.Here's a print screen of the smart converter..
-
I burned a playlist to a data CD using itunes 11 but what is best way to get it import it into another computer with itunes running? I get an "X" when trying to copy to the "automatically add to itunes" folder on the 2nd computer.
ok... so i i just made sure all my music is all together in 1 folder and i am going to trash my old music folder that is in the itunes folder... and follow your directions - let itunes start w/new library and bring my music in. Well, last little hurdle/question. I noticed that the place where my itunes library is - on an external drive doesnt have much space left on it. The place where i gathered all my music together in order to start fresh - is a different external drive and has LOTS of free space on it.
SO... i now would like to just keep all that freshly compiled clean music right where it is but in advanced preferences I want to point to that new folder on the drive that has so much more space. So... should i delete the old music then go into itunes with a blank library and change the folder in preferences - quit and go back in and then follow your steps to loading my music? If i change the setting of where itunes looks for the music - that doesn't wipe out the old stuff... it just mixes it all up together right? I dont want that!!
i promise this is the last question - i would love to fix this problem tonight and just be DONE!
Thanks in advance for your patience and knowledge!!
Lisa -
I have an MAC OSX 10.6.7 and when I turn it on the fan keeps running. I shut down/turn on and it's the same. Any suggestions? Thanks.
jean156,
I am a little confused, you are posting in an iMac forum however your profile only indicates you have a MacPro. While I agree a SMC reset may help please carefully read the link The hatter provided because different Mac's have a different processes for resetting the SMC.
In the mean time you may want to update your profile (Your Stuff in upper right and click Profile) and also please post in the correct forum to avoid confusion. -
Trouble with split into clips when importing from camera
I'm importing old video from mini DV tapes into iMovie. Unlike many other people writing here, I'm not having trouble with the connection between the camera and the computer. That works fine. I click "import" and the video IS imported.
The problem is, iMovie splits up the video it loads into little clips, some are long and some are less than a second long. Then, when it displays them in the clips window, they are out of order. For instance, the first few bars of a song might be pulled off and be in a short clip near the bottom of the list while the rest of the song is in a longer clip near the top. As a result, I am forced to carefully put them back in order -- like making a jigsaw puzzle -- as I drag them into the project.
Can I either turn off whatever it is that splits the input into clips (I'd like just one big clip) OR at least could the clips be displayed in the order that they were loaded from the camera so that clips that belong together are next to each other?
Thanks (and sorry for asking what is PROBABLY a dumb question),
akThe best answer I've found so far to my own question is the post from Randman here:
http://discussions.apple.com/thread.jspa?messageID=9007098
As he points out, the problem is that iMovie is splitting and ordering the clips by their "time stamp", but if the video was previously edited (even by iMovie itself!) this time stamp may reflect the time it was edited rather than the time it was filmed. This is especially a problem for clips that have a title or special effect used on PART of it, because the modified part does not show up anywhere near the unmodified part in the list of clips.
Randman ALSO provides a sort of solution: rename the files themselves. I found this did work. (You rename them so that time stamps in the filename are in increasing order when listed in order by "last modified" which reflects the time they were loaded from the camera!)
I've written myself a script to do this automatically, but it is a bit of a hack and not really suitable for distribution. But, I suggest that someone with more time and programming experience than I write such a script that would help people with this problem! -
Import of 16:9 PAL Clips to iDVD turn into 3:4
16:9 PAL clips are well edited by fce and exported as quicktime movie are played well as 16:9 by finder. But when i import them to iDVD they will be played as 4:3 ><. Some clips failed, some are working well. If i have found a clip which does not turn into 4:3 ,it may not be changed. For example: Changing the audio-level may cause the same result. It changes into 4:3 when played by iDVD.
Who has got same experiences ? Are there possibilities to avoid this ?http://www.fcpbook.com/Video9.html
Maybe you are looking for
-
I have an I phone 4 with 32g. The voice dial used to work just fine, but now it doesn't recognize the words and ends up saying someone elses name and starts calling the wrong person. It even won't recognize a number when spoken to it and speaks bac
-
I've spent an hour on this: massively frustrating. My custom ringtones disappeared from iphone when I just sync'd and now show up in itunes/iphone interface (on the mac) grayed out: won't sync to phone. I know the audio files work because they were f
-
I need a timer function to ping the server every 5 secs??using threads.
I need a timer function to ping the server every 5 secs?? using threads...i have to use a thread coz i cant use Timer and Timer Task coz clients r on the JDK1.2 version.I have created a thread which keeps checking th ping msg & any server msg is ping
-
"Application not found" error after deploying
Hi, I am getting error as "Application not found" after deploying. When I depoly the project am getting Finished Deployment message in the Deploy Output View followed by a popup message "Application not found". Please help me in solving this error. R
-
N82 keeps playlists even after beeing deleted from...
Hello, im using .m3u playlist format from winamp to arrange my music on n82, but when i delete the mp3 files and the m3u files, the playlist stills in the memory on my n82 on the music player, so i need to remove each playlist manually, one by one...