Clips won't import from Panasonic Camera

Hello,
I'm new to imovie. Actually, I'm in the process of trying to create my first project on it and am having some trouble. I'm hoping someone out there can answer my questions about it. First, when I plug my camera into the computer and open imovie and a new project is selected the clips on my camera will not import onto the computer. The only thing that appears are the still images from iphoto that were previously on the computer. There are absolutely no clips on the computer even though when I play back on the camera with the battery in it, and when it is not connected to the computer, there is over one hour's worth of clips on the tape. Why do you think this might be happening and what can I do to make the clips import onto imovie?
Now, just so you know. The camera that I'm using is a Panasonic PV-GS83 and the cable I'm using to connect to the computer is a DV cable that I had to purchase, which should have been included with the camera, but was not.(The DV cable seems to fit into the computer fine.) Also, In order to plug the DV cable into the camera and the camera into the computer I have to remove the camera's battery. In addition, according to the camera's instructions, the camera has to be in Tape Playback mode and not in PC mode in order for it to import video images onto imovie. Moreover, images for the camera can only be recorded on a tape or a card, but supposedly the card can only import still and not video images. I've also mainly recorded video images onto the tape in the camera. Finally, the version of imovie that I'm trying to use is imovie '05, the computer is a Powerbook G4 and the operating system is MAC OSX (10.4)
If someone out there could answer my questions soon I would really appreciate it.
All the best,
csoste

welcome csoste to the  boards..
ehm, what is your question....... ?
(and: if iM5 is in use, why posting in the iM≤4 section of this board... ?)
anyhow, usual workflow to import from miniDV:
connect camcorder to powerline..
connect 4/6pin firewire cable to Mac
set camera to play
set iM to 'Import from camera' (manual for iM5 here: http://www.apple.com/support/imovie/tutorial/index.html )
...

Similar Messages

Imovie 10.0.3 won't import from a camera that doesn't have a tape

I am using iMovie 10.0.3 and am trying to import live video from my canon gl2 camcorder without having to use a tape. iMovie will capture just fine but only as long as there is a tape in the camera and the camera is recording. If I play pre-recorded tapes to iMovie it records ok as well. I've been using this camera to my macbook pro (2011) and using iMovie without having a tape in the camera.

You need to convert the VOB files back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, as well as the the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

My photos won't import from my camera into iPhoto

Just recently my photos are not able to upload from my Canon camera into iPhoto, but it was working before.
When I plug the USB camera into my Mac the device shows up on the sidebar column in iphoto, it will say "Loading Photos" with the little circular waiting symbol and then it will just go to a blank grey screen.
If I try to click on any of the options under "File" or "Edit" they are all greyed out.
I'm not sure what the problem is since the camera is clearly connecting and being ready by iphoto and starting the import, but then it just stops. There are definitely pictures on the camera to import because I can view them on the camera.
Has anyone else had this problem or know how they might be able to help? Everything seems to be working except for the last step.

Can you access the imges on the card with Image Capture (in your Applications Folder) ?
I would try reformat the card with your camera.
Regards
TD

Aperture 3 won't import from Panasonic LX-5....

When I connect it does nothing. It doesn't see the camera at all. Even if I try to force the import it still won't see the camera. Is there a problem with A3and this camera?

I have been trying for 3 hours and finally it sees the images. iPhoto did not see the images either. I am not sure why it now sees the images, I did nothing different.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera. Does anyone know how I can get the audio back?

Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

IMovie HD won't import from Sony HDR-HC1

iMovie HD 5.0.2 (111) on my G5 desktop controls, but won't import from, my new little Sony HDR-HC1 1080i DV camcorder. Same was the case with my 12" 1 GHz PowerBook until, at the advice of a Manhattan Beach Genius Bar tech, I did an archive reinstall of 10.4 and a reinstall of iMovie HD on both my G5 PowerMac and G4 PowerBook and then downloaded all the updates. Now my PowerBook works, but my PowerMac still won't import. On an empty second HD in my PowerMac I installed OS 10.4 and iMovie HD ONLY (to create as sterile as possible of an environment), made the 2nd HD my startup drive, and still iMovie HD on my PowerMac will not import from this camera (although it will from an older Sony VX-1000 regular def camcorder).
Does anybody have any solutions, or any idea why iMovie HD now imports on my PowerBook but after the same makeover still won't on my PowerMac?
Per earlier posts, I tried playing some piano notes in Garage Band, trashing the iMovie preference files, and reinstalling QuickTime (the tech had heard QT 7.0.3 could be at fault from becoming corrupted in certain updating combinations), all to no avail.
HELP!
PowerMac G5 2 x 2.67 GHz Mac OS X (10.4.3)

I have had import/capture problems using FW drives with FCE/iMovie5 and my 2gig iMac. My canon GL2 works fine but only when no other FW devices are connected to the FW port I use the computers internal drive to capture. If your using the G5's internal SATA drives this (below) may not apply.
http://discussions.apple.com/thread.jspa?threadID=277702&tstart=0
http://discussions.apple.com/thread.jspa?threadID=277704&tstart=0
Some G5 users have had to purchase a FW PCI card or have the G5 front FW port replaced. Check this link.
http://www.xlr8yourmac.com/G5/G5usb_firewirereports.html
Cheers!
Steve

Import from Panasonic DMC-FZ28 Lumix

Trying to import from Panasonic DMC-FZ28 Lumix but the only import option is the
in-built camera on my MPB (10.5.7).
I can see the camera in the Finder window and can click on various photos.
When the camera was connected to the USB port and select the setting as PC Connection.
Is there something else I need to do in order for iMovie to see this camera ?
Thank you,
Jay

If you are using iPhoto, import the photos into iPhoto. Then, in iMovie, start a new Project and name it (or open and old project). Open the Photo Browser in iMovie, and drag the photos in from there.
If you are not using iPhoto, drag the jpegs from your camera to a folder in the Finder.
Open iMovie. Start a new project and name it (or open and old project). Drag and drop the photos from the Finder window into your project.
Message was edited by: AppleMan1958

I can't add a title to a movie imported from my camera! how come?

This is really frustrating because I have one clip (an entirely different one than the one I want to add a title to) that is "accepting" a title. but the one I imported from my camera (a testimonial from a client) just wont work. nothing happens when I drag and try to drop a title. with the other one, it turns blue and it's clear I can drop a title. I was able to edit my video and remove some clips.
this has happened before. i need to understand why it happens so 1. i can avoid it in the future and 2. stop wasting so much time messing around with this critcal but SMALL piece.
please help!
Fareen

ill try to help...
forgive me i'm no tech. much like pictures cant be edited retitled etc, once uploaded from camera roll. (they can be in camera roll) I think you can do it on the computer after the fact.
as for where to find the video that depends on the computer. I dont know on a mac but windows based you find the file in your library right click and select rename.
hope that helps

I'm having trouble with video imported from my camera memory card.

I'm having trouble with video imported from my camera memory card.The video breaks up and pixelizes when it's directly imported from the memory card. That makes the video useless. Why does this happen? It doesn't do that in any other video editing software. Thanks for the help.

More info please:
Type of camera?
Was the card formatted in the camera doing the shooting?
Type of files the camera is set to record?
Al

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

There is an option in your Lightroom preferences on the General tab, "Treat JPEG files next to raw files as separate images". If you have that option checked then Lightroom will import and display both your raw and JPEG files. Are you using active D-lighting on your camera? If you are then you need to turn off that feature.

Import from a camera that contains mts files

what is the required file structure for FCE to import from a camera that contains mts files

The file structure is provided/created automatically by the camera....
So if you still have the original structure, then you should be fine, but you may need to install software for log and transfer from the camera manufacturer...
If you just have the individual mts file, you are SOL as far as log and transfer goes. In that case you need to purchase ClipWrap2 to convert to Pro Res....
Not sure how this all works with FC Express though...

Importing from DVD CAM

Hi, I just installed Adobe Premiere Pro but I don't know how to import my videos from my DVD CAM. Could anyone tell me how to import from DVD CAM?
Thank you

Was just given 2 DVD cam discs containing footage that was shot at a concert I am editing. On reviewing the discs, I noticed that each song is assigned to a separate chapter on the DVD. I'd really like to use this footage as it provides additional camera angles I didn't cover. I am going to use my old Ulead Video Studio 8 program to convert the DVD files to mpg's for editing in Pr. (I will also check out the software Jeff mentioned). I'm trying to convert each chapter on the DVD to an mpeg2 file so the files size is manageable.
The footage I shot is mini DV, and I plan on mixing the two sources. What do I need to look out for as far as the "conversions/extra steps" you mentioned?
Thanks.
cellobella

Images won't import from Lightroom. (I have Creative Cloud 1.7.1.418/Photoshop (2014)/Lightroom 5.6)

Images won't import from Lightroom to be edited. There were no problems until I upgraded to Photoshop (2014). LR & Photoshop work well independently (I have Creative Cloud 1.7.1.418/Photoshop (2014)/Lightroom 5.6). All are up-to-date.

I had the same problem. It seems the scripts that control the transfer of images from LR to Photoshop got deleted or messed up. The fix I found on the LR forum was as follows:
This solution allows you to run a repair installation without uninstalling Photoshop CC 2014. If you've already uninstalled Photoshop CC 2014, install it from the Apps tab of the Creative Cloud desktop application.
Open the Creative Cloud desktop application.
Select the Apps tab.
Scroll down (if necessary) until the Find New Apps section displays.
On the same line as Find New Apps, select Filters & Versions > Previous Version.
Click the Install button next to Photoshop and select CC 2014.
Click Yes, install this version.
Once I did this, the interaction between LR and PS CC 2014 started working again. I did notice that Photoshop showed up as needing to be updated in the Adobe CC application so I just clicked on the update button and after a few minutes photoshop had been updated. The importing function still works so I think everything is OK.
Not sure if this was part of the problem, but after updating the PS CC 2014 application the first time, I uninstalled the original PS CC application as I didn't need it anymore. I'm thinking that may have caused the scripts to be uninstalled along with the PS CC application. Rerunning the installation put things back to normal.
Hope this helps.
Brian

How do I get rid of "unreadable files" when I am importing from my camera?

How do I get rid of "unreadable files" when I am importing from my camera?

Are all images unreadable? What is the exact error message you are getting?
If only a few images are unreadable, try to import not all photos at once, but in smaller batches, until you know, which photo it is that cannot be read. Import all photos that can be read and reformat your card in the camera to remove the unreadable files.
But if all photos are unreadable, try, if Image Capture can read your card.
Is it a new camera? Have you been able to import from that camera before?

Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx

Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx in advance!

I finally got a representative that was able to help me, she had me go to Get Info, by right clicking iMovie from the finder, and I had to click on Sharing & Permissions>Everyone>Read & Write

Clips won't import from Panasonic Camera

Similar Messages

Maybe you are looking for