Clock and date settings are not saved

clock and date settings are not saved in lion

I'd give AppleCare a call.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
You may want to look under date & time and set the clock from the internet. At least you will have the correct time after a while.
RObert

Similar Messages

With 'Mail v8' and 'Yosemite' accounts settings are not saved and I keep having to check the "SSL" box

With 'Mail v8' and 'Yosemite' 'mail' "account settings" are not saved and I keep having to check the "SSL" box. This has only occurred since upgrade to Yosemite?
Any help would be appreciated as this is so frustrating!!

Update to 3.6.16 has fixed this problem.

Settings are not saving

Hi Guys
I am fairly new to my iMac (since Christmas). Everything was working perfect and now I am noticing that my settings are not saving. Some examples are:
1. I set it so my pictures can be shared with other users. The other users of this mac still cannot pull up the pictures in their iPhoto.
2. I have the settings for software update set to check monthly. Every time I wake up my computer it checks for updates automatically.
3. The log in settings are set to log in without a password every time I wake up the mac and it still requires a password.
What is going on??? It is so frustrating, please please help???

So even after opening iPhoto, there is no file "com.apple.iPhoto.plist" in your ~/Library/Preferences folder (that is in your HOME folder, NOT the Library folder at the top level of your hard drive)?
If so, there is an issue with permissions to write to your ~/Library/Preferences folder. Go up one level to your ~/Library folder (again, the one in your HOME folder), click once on Preferences folder, then chose menu File>Get Info. At the bottom of the Get Info window, next to your user name, the Privilege column should say Read & Write.
If it doesn't say "Read & Write" next your name, you have to change it so that it does. Click on the lock icon in the lower right of the "Get Info" window, enter admin user name and password. Change the Privilege column next to your user name to "Read & Write." Then click on the little gear icon at the very bottom of the Get Info and select "Apply to enclosed items."
You might want to go through that procedure even if it does say "Read & Write" just to make sure, because it really sounds like you have a problem with permissions in the Preferences folder.

Mail settings are not saved any more

Hi,
after my mailbox structure has crashed, I tried to reset Mail as explained in this answer: https://discussions.apple.com/message/22302114#22302114
After restarting Mail all settings were deleted (as expected) and I set up my accounts and settings again. Then I recognized that the settings are not saved any more. I tried some times but Mail didn't save the settings.
I hope there is a chance to fix this problem.
Thanks for help.

Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

Form settings are not saved on one client

Hello,
What are possible reasons that form settings like size and position are not saved.
I have one client with SBO 8.8 PL15 installed. On this client this settings are not saved.
So the user has to resize the forms everytime he opens it.
I tried it myself with his SBO user directly on the server and a terminal-server. No problems there, all settings
are saved even if i switch between the systems.
If i am correct these settings are saved in the UserPrefs field in the OUSR table.
Any ideas?
Thank you for all your help.

Hi,
Have you searched the forum?
You may check this to start:
User Settings lost after session is released
This setting is related to client.
Thanks,
Gordon

Server settings are not saved on client

The client has a new workstation (Vista) where the server settings are not saved. The client is able to login but have to setup the server settings overtime she logs on to SAP B1.
Client: Vista
SBO: 2007A SP01
what is causing this and how can this be resolved?

You may check these threads first:
Re: Server name in Change Company does not stay
Re: SQL Connection to SAP Reset
Thanks,
Gordon

Missed calls and placed calls are not saving in 7942 phone

HI
i am facing some issue in telephone directory, in my phone missed calls and placed calls are not saving. i am using cisco call manager and 7942 phone. please help me in this issue.
Thanks
Shijo

Hi Shijo,
Is this affecting only one 7942 IP phone or all of them? if this is affecting all then you may try ta firmware upgrade. If this is only affecting one of them then you can compare the settings of this phone with the working ones or try setting the phone to factory defaults.
HTH
Manish

Trouble with clock and date settings

Hi Folks,
Every time I start my G5 I get a message telling me to set the clock and date settings. I set them as requested and save them and put the little lock on them, but next time I start the computer the same message appears.
Would anybody be able to assist please?
Thanks in advance,
Eddie

You might need a new battery. Go to http://support.apple.com/manuals/ and find your exact model - the manual should show you where it's located and which type you need to buy. They're not expensive.

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

When I close CS6 changes in settings are not saved. Reverts to default settings on reopen. Why?

Sorry Photoshop -- Problems solved -- I read the details -- turns out you need to make changes with no files open for the preferences to apply to all files.
Thanks, Al

Visio 2010 - Shape Data Fields Are Not Saving

I am having a problem with a number of shape data fields which are not saving data that has been entered into it, whether by entering it through the "shape data" or "define shape data" dialog boxes, or by editing the "shape
sheet".
All data fields appear to save normally while file is open, it remains as entered. However, when file is closed and later reopened select data fields do not retaining data correctly. Some retain nothing (null), or revert back to a "default"
value, see below for a couple examples:
Rack Units: Want to enter data as 1U, 2U, etc. ... in some cases it will save it as entered while in other cases it reverts to "1 RU", "2U", etc.
Room: Enter the data as I want it stored, most of the time it appears to come back empty, there are some shapes which will retain as entered.
Comments: Fails to retain any data
I have looked at a number of reasons to explain why, whether the problems occur with stencils is supplied by Microsoft, a vendor, or were custom created. Looked into whether it might have to do with a particular vendor's stencils/drawings
but I have a number of Cisco drawings where some save those fields as entered while others do not. I believe it could be a setting within the stencil preventing it from saving the data as entered, enabled in some cases and not in others.
I have checked "Protection" under the "Developer" tab, but nothing appears to be set to prevent editing/storing data entered.
Is there some setting(s) or field(s) somewhere that I can look at to allow this data to be saved as entered?
Is there a GLOBAL setting that can be set once within a file?
Thank you in advance for your time to assist me in fixing these problems. Have a great day!
MJ_NWE
MJ

>Can I build logic so that they can't fill in a field unless the previous field has been filled in?
It's theoretically possible to do this (e.g. each field has an action
of removing read-only on the next). It's considered extremely bad form
design, because people don't always fill in fields in the order
specified. If you watch people with a form they fill in their name,
address, other easy stuff; then they go back for the harder stuff.
They may want to save a form because one piece of information needs
research.
What you might like to consider is a large splash "FORM INCOMPLETE" in
Red or whatever, which vanishes when all the fields are completed.
Aandi Inston

Early 08 MBPro-TCP/IP settings are not saved

On my home wireless network I have MAC address filtering enabled and broadcast SSID disabled. All MAC addresses are entered in the router's filter. An early 08 MBPro does not retain network settings for Verizon router on the network. When I look at the TCP/IP settings in network prefs I see they are nothing like other computers on my home network. If I click "assist me" then "diagnostics" in Airport setup I get walked through a process which allows me to choose the network I want to join. There is a list of available networks which does not include mine (since SSID is disabled) and a button which allows me to choose closed network, which I take. After entering my network's ID and WEP password I finally get connected and get a message that my connection is OK. Problem is, when I put the computer to sleep or restart I can't reconnect and the old settings which don't work reappear. It appears that the TCP/IP settings are not being saved. Could this be some corrupted preference of does it sound like a hardware problem? Thanks for any insights.
Message was edited by: Thomas Camilleri

Odd. You may be able to repair this with the 10.5.7 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
Oh, and please be sure to re-boot your modem and router.
-mj
Message was edited by: macjack

PROBLEM FLASH : settings are not saved

Hello,
I have a problem with flash recently, i'm using a PPC G4 1,5
GO RAM version osX 10.4.10 2x1 GHZ ( firefox 2007 ), when i want to
set preferences of Flash on the site of adobe it's always getting
by defect preferences when i reload the page for any settings, they
are not saved, i re instal Flash and i clean up cash etc etc but
nothing .... i can't use some softwares and it's tidious .....
Help, thank you .

Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

When Firefox is closed, all previous search page and home page settings are not saved. Must reset firefox and reset homepage url everytime.

All previous search engines on "Manage Search Engines" are gone and cant access the "get more search engines"...all grayed out.

Session Manager and Save session are the ad-ons which can solve your problem of saving previous search pages and url.
To set up home page and its related error You have to read this :
http://mzl.la/Mt91fd

Distribution settings are not saved in a .cds file

I have successfully created a distribution for my CVI8.0 application, and deployed it with no problems. However, although the settings work, a .cds file never gets created - I checked in the directory. When I close CVI and start it up again, it complains that the .cds file is missing. My distribution settings are gone, and I have start all over again, from 'Manage Distributions > Add' etc.
I want to be able to save my distribution settings.
The only way I have found to make CVI create a .cds file on the disc, is to go through the process, then click 'remove'. Then I get a prompt 'Save changes to the distribution?', when I click yes, the file gets created. After that, I can add it back in again. Is this a bug or am I doing something wrong?
Dave

Hi Dave,
In 8.0, the expected behavior is that any new/editted distribution is saved to disk (as a .cds file) when you OK the Manage Distributions dialog. It is also saved if you edit it from the Distributions>>Edit <name> menu item. I am unable to naively reproduce the problem you describe. Even looking at the source code, there is not an obvious scenario that might produce the behavior you describe.
If you could check a few things for me, it might help me figure out how this is happening.
1. Confirm that you have CVI 8.0 (not 8.0.1).
2. What is the path of the .cds file? Is there anything noteworthy about this path or the drive?
3. Try creating a distribution for one of our shipping samples (e.g. CVI80\samples\apps\finger.prj), and see if you have the same problem.
4. Make sure this happens even when you don't edit or build the new distribution. That is, hit the New button on the Manage Distributions dialog, OK the New Distribution dialog, OK the Edit Installer dialog, and OK the Manage Distributions dialog.
Also, please let me know your OS version and what other NI software, if any, you have installed.
Thanks.
Mert A.
National Instruments

Firefox v30 Privacy settings: Use customs settings are not saved

After changing privacy settings to
-> Use custom settings for history
[X] Always use private browsing mode
[_] Remember my browsing and download history
[_] Remember search and form history
[X] Accept cookies from sites
Accept third-party cookies: [Always]
Keep until: [I close Firefox ]
When exiting Firefox and relaunching it, this settings is gone.
and 'reset to [Remember history]
Any suggestions as to how to solve this?
Thanks
=

Sorry, to reset firefox will require me to install a number of plug-ins.
All my settings were lost.
Luckely I created a backup using MozBackup.exe.
Some add-ons can easily be re-installed, but what about stuff like Acrobat PDF creator and Norton Vulnerability Protection. I think those add-ons are installed when an application is installed, so it would require me to re-install such applicatons.
Preferences not saved: nothing is write protected.
Deep sigh...
=

Clock and date settings are not saved

Similar Messages

Maybe you are looking for