Clock icon near email
Hi,
I'm using a Blackberry Q10. I have two e-mail accounts on it; one is working correctly while the other one two days ago stopped sending e-mails. It normally receives them but doesn't send them and a black clock sign appears instead of the check mark.
I have tried resending the e-mails and taking out the battery but nothing changed. By the way, the last e-mail that was sent before the failure is continually sent again and the receiper already got it at least 30 times!
What can I do?
P.S: Please excuse my English...
Solved!
Go to Solution.
go to settings > accounts > tap hold email account not working > delete it > set up again.
it might just need the password entered again as this happens once in a while with yahoo.
Similar Messages
-
Multiple times throught the day my BB wil have a little time clock icon that shows up and while it's there the phone is delayed and I can't do anything with it until it goes away. I found a thread that suggested that I make sure I check all my running apps, which I did and shut down all but the defaults and the icon would still pop up. Is anyone else having this problem or know of a solution to this? Thanks!
Then you may have a badly behaving app installed -- this can happen even if you don't launch the app...it can cause problems while dormant. There are 2 approaches:
1) Start removing add-on apps, one at a time, with long gaps (measured in days IMO) between. When the behavior stops (if it does), you know the culprit.
2) Reload your OS from scratch cleanly. Run with no add-ons for a few days. If things are fine, start adding add-ons, again slowly. When the behavior starts up (if it does), you have your culprit.
It also may be that your OS is corrupt, in which case the reload may cure it.
It also may be that your OS is dated, in which case getting an update from your carriers DL site might be in order:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
You see, there are sadly many possibilities...none will be a simple time determining the right solution.
Best.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have two iPad 2 with separate iCloud accounts. I want to copy folders of weblinks from one iPad to the other. Email solution? Answer needs to be written for a user who doesn't know how to select a folder or a number of icons and email or copy them to something that can be emailed. I know how to do it one at a time by opening weblink and then emailing the link from safari.
Good idea. I've already used the feedback for my general suggestions to improve the way Apple handles bug reports (and tried sending it to Steve Jobs too), but I'll send a specific suggestion for a bug app on the iPhone.
However, my question is whether there is a simple way to send bug reports from the iPhone now that I have overlooked. -
Blackberry 9300 Small clock icon and fast battery drain
Hello there! My girlfriend's been having problems with her 9300. A couple of days ago, a small clock icon started appearing whenever she would try to use a menu item on her blackberry, or when she would try and turn off the lock. She also found that the battery would drain signifigantly faster, to the point where a full charge won't last a day.
She has no 3rd party apps installed, and has wireless disabled. Yesterday, we took it to the local store and they replaced the battery. When she's had these problems, she's turned the phone off and removed/reinstalled the battery to no effect.
Thank you for your time.Hi, I had the same problem... I found the solution and the culprit is compression...
Menu >> Option >> Device >> Storage >> Enable Compression...
Disable this and the pain is over... my battery has popped back to normal... -
JTable : How to display an icon near the column name ?
Hi all,
I'd like to display an icon near the column name of my JTable when an user click on the column; the icon specify the sorting applied to the data of JTable.
I know that i have to write a render, but how ?
Cheers.
StefanoHi all,
I found the solution at http://exampledepot.com/egs/javax.swing.table/IconHead.html
Cheers anyway.
Stefano -
Pc is not recognize PDF file ( icon ) in emails and to open these it is loading a 3rd party program on the web. I have installed Adobe several times. To open my files I need to drag them to my Adobe program. any ideas??
Hi aadeshs
This problem is on my laptop running Vista ( Business) on Adobe 10.0 , for many years I did NOT have a problem with this . No forum Pages on this.
Also i would like to know how screen readers can better interact with PDF as my wife has difficultys on some email attachments on her laptop , again there seems no easy avenue for someone in her situation surfing websites and forums for Hours maybe ok ok for sighted people, but not if you are blind & use a screenreader. No Support Help from Adobe is available.
thanks
oliver654837 -
The apps that come with the iPhone include a Calendar and a Clock.
The icon for the Calendar changes to show the current date.
Why does the icon for the Clock always show 10:15? I realize that the time shows at the top of the phone screen anyway, but the Clock icon is more visible, and occasionally throws me off.
(It would be nice if the temperature in the Weather icon were correct, too, but I realize that is more difficult, and it bothers me less.)Good suggestion - never thought of that before.
Send it to someone who can do something about it http://www.apple.com/feedback/ -
Clock icon disappeared / lost
Hi, I still have clock funtionality (alarms go off, etc.) but the only way to access the clock is by searching on the word "clock" using the new search feature. The icon has disappeared or is lost, leaving a blank spot on the home screen. This did not occur immediately following a sync. Rebooting doesn't restore the icon. I haven't had a chance to re-sync yet but just wondered if anyone else had this issue. You're not supposed to be able to delete the clock icon and it's not a choice under "Restrictions".
Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If that doesn't work, you'll have to restore, either as new or from a backup.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf -
Clock icon disappeared on my dock for OSX - 10.9.4
my clock disappeared from my desktop and I am now late for morning coffee
There is no system installed clock icon in the dock (at the bottom of your desktop); if you've installed a third party app, go to your Applications folder and drag the app icon back into the dock.
-
The clock icon does not display the correct time. It now (@21.36) seems to be stuck at two to seven. Is there a way to (re) activate the clock?
I can't afford another iPod because I said that it was going to be the only iPod that I was going to get
Should've thought about that before you jailbroke it. Any other devices you jailbroke should be unjailbroken right away. Since it cannot connect to iTunes, the jailbreak already messed it up so try this: http://support.apple.com/kb/HT1808 -
Curve 8520. Small clock icon appearing and very slow running
My curve is operating really slowly and when I try to open or send a text or open a mail, I get a very small clock icon appear. After about 20 secs, the text or mail opens. Not able to send any e mails either. Thought too many stored mails may be the problem but device won't now allow me to delete. Battery also running low after just a few hours,even after fully charging.
1. Do a reboot on the device: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
2. To prevent freezing or lagging/slow response on any BlackBerry, the most important practice you can adopt is to be sure to CLOSE applications when you are finished using them.
If you just hit the red "end call" key to go back to the home screen the application actually stays open and running in the background. If you do this repeatedly you will have lots of apps open and consequently your memory will get used up. Lack of memory is the biggest reason your BlackBerry slows to a crawl or locks up. If you get into the habit of actually using the menu key to close the applications this will at least slow down this memory-clogging process. You still may have to do a battery pull or use the "Quickpull" app once in a while when things get slow.
To check what applications are running on your device in the background, press the Menu key then choose Switch Applications. You will see the icons of each application there.
So now, check your applications running in the background. There are commonly four or five applications that will always be running (Messages, Call Logs/Phone, BlackBerry Messenger, Homescreen, and the Browser; there are other third party applications such as BeeJive, and BlackBerry Alerts which will also run in the background which you cannot close if you want them to operate). Make certain that the browser is NOT on an active webpage (open the browser and choose Menu > Close). Close any other applications that do not need to be running (the camera or a game you were playing or Google Maps). -
CDC - clock icon does not turn to green from yellow after starting journal
Hi,
I am going through the following steps for my datastore for the CDC concept:
1. created a datastore.
2. Selectively reversed a table into it.
3. difined a simple journalizing mode and JKM oracle simple.
4. Right clicked on the data store , in that change data capture -> subscribe - > SUNOPSIS.
5. Right clicked on the data store , in that change data capture -> Add to CDC.
6. Right clicked on the data store , in that change data capture -> Start Journal.
In the Operator , i donot get any warnings or errors after i start the journal.
I have refreshed my Designer also.
But the clock icon is not turning into green from yellow.
I tried this for other datastores and tables too. Still the clock icon doesnot turn green.
Due to this iam not able to get any journal data.
Please help me with this issue.
Thanks
Divya aggarwalDear Sutirtha & Brice,
CDC is working fine for my source table now. Thanks for your help.
But now I am having issue with the Integration flow table.
I have created and interface with the journalized table as my source which is defined in one schema and target table which is defined on other schema.
I have kept staging area different from target.
The KMs which I am using are :
Source table - LKM SQL to Oracle: Source to Staging
Staging table - LKM SQL to Oracle: Staging to Target
Target table - IKM Oracle incremental Update - Common
I am using the default option values for these. Especially the detection strategy in the IKM is "<Default>:Not_Exists.
Now the issue is that my updated record of sorce table is getting inserted into the journal table and also into the work table at target schema side.
But that record is not getting inserted into the flow table , as a result of this that updated record at source is not getting updated in my target table from the flow table.
The package which I am executing is getting executed without any errors. Please guide me for the flow table issues.
Thanks & Regards,
Divya Aggarwal
Edited by: 784414 on Nov 25, 2010 11:32 PM -
HowReSet CLOCK & DATE? cant see right 2" Screen Crackd where clock icon is
brief: Is there another way to RESET CLOCK, because I can't see the CLOCK ICON which is located in upper right corner of the screen, because my screen is Cracked but just on the right two inches.
Of course, the solution is to replace the screen, but we can Not afford that anytime soon, and would like advice on alternative ways NOW to reset clock & date
Is there a way to relocate that Clockk iicon to another location on my screen? Or, or...
I have just a small 9 3/4 inch screen (12" diagonal).
Dropped & cracked my screen last year. Still works great, that's not the problem, I work arounnd it.
But I left my computer on overnite without the power cord hooked up.
I had supposed that it would just go to sleep and not screw me up. But it did.
It warns that clock needs to be reset or some applications may not work right and may cause troubles.
So far those troubles are:
I visit to some of my regular websites where II have registered, & sometimes get warning that it does not recognize me, but luckkily so far they've given me option of hitting continue & I get on my fav sites ok. So, that's not my main, problem, tho I would welcome advice on that if i can't reset my clock, but if ii can't, I'll just repost a separate query later.
My APPLE 'CALENDAR' applic, that came with this old G4, now opens to 1969, and must click up arroow year by year to get up to 2008. I'll probably post a separate !Q on that too, if nec.
Maybe I posted this to the wrong topic section and should post it elsewhere? Liike customization?
Will be VERY GRATEFUL for soolutionn & reward help with pos feedback.
THANK YOU VERY MUCH.Hello thelnukus,
Kappy has addressed your problem of time and date settings holding due to battery charge etc. but I wanted to address your question concerning placement of the time and date on the screen.
This can be done simply by choosing "Clock" tab in Date and Time settings in System Preferences and you can customize the clock to display as digital or analog clock on your desktop and this can be move around I believe and transparency can be set to differing levels. Once you get your battery prob worked out try fiddling round with the settings in Date and Time for the Clock.
I hope that helps some,
littleshoulders -
This is not a question, but a suggestion. I think the iPhone Clock Icon needs to work as an actual, live and accurate, clock showing local time while it just sits there on the screen.
IMO, that's just a waste of processor, memory and battery especially when you have the time at the top of the screen.
That being said, you can provide Apple with your suggestion... http://www.apple.com/feedback/iphone.html -
I am using photoshop elements organizer and click on the i beside Mobile Albums. After entering my user ID and password all I get is a clocking icon moving very slowly
Hello Timmy790
Try the suggestions in the article below to resolve the issue of seeing your old Apple ID on your iPhone.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G.
Maybe you are looking for
-
Can't get traffic flowing between VLANs on an ASA 5505
I've got an ASA 5505 with the Security Plus license that I'm trying to configure. So far I have setup NATing on two VLANs, one called 16jda (VLAN 16 - 10.16.2.0/24) and one called 16jdc (VLAN 11 - 10.105.11.0/24). From each subnet I am able to connec
-
After updating Airport software, Macbook will not boot
I see others have updated with the new Airport software without incident, but not me. I just ran software update to install the Airport update (hoping it would cure the problem I've had -- and other users as well -- with the connection dropping every
-
How to change username and password for already running mappings
Hi Gurus, We have created so many mappings(more than 200) in owb 11g and deployed them into production and all are running without any issues. Now we are in big problem and the reason is our internal team is asking us to use the new user and password
-
Selection Menu for VM, possible?
Hi all, I pretty new at this, but after weeks of trial and error, I am able to get the SRSS 4.2 and ESX4U1 to display my vm desktop to a DTU. Now I want to dig a little deeper. Question, is it possible in SRSS 4.2 to be able to create a "selection me
-
Am having no luck sharing my completed video. Neither button seems to work - not sure what to do to export so I can use it. Recently installed Mavericks and then IMovie update along with IPhoto update -