Clock keeps changing back 4 hours..why?

it is set to Boston, USA time zone but every two days or so it reverts back 4 hours. Is there something I am missing?

I too am having the same problem.
Even if I manually set the time instead of using the time servers the time decreases by 4 hours.

Similar Messages

Time keeps changing back two hours!

Ipod touch 4th gen. The time zone is set to Monterey (Tennessee). They have the same time as we do in Crossville. My Ipod keeps changing the time back two hours for some reason. So right now, its 9:26. My ipod says it's 7:26. I can change it back manually, but it just changes back. I didnt have this problem before i had to restore it from the update freeze. Is there another Monterey in the U.S.A. or is it just the ipod?
My computer (Toshiba Windows 7) does it too, but i dont remember if it did it before my ipod froze.
Please help!

I didnt think it was obvious. Everyone I asked always told me it was a different time zone. Well whatever, thanks.

How do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told

how do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told

No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
Regards.

I have firefox 7.0 and i go to about:config and change the URL default from bing to google but when i close firefox an open it back up it changes back to bing why is this?

I have firefox 7.0 and i go to about:config and change the URL default from bing to google but when i close firefox an open it back up it changes back to bing why is this? I stand by google 100% and if ur gonna make it where i can't use google as the URL's seach engine then i will uninstall it.

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref network.http.max-connections from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How do you Customize the weather on the home page and make it default to that setting? I have Customize several times and it keeps changing back to McLean, VA in English

How do you Customize the weather on the home page and make it default to that setting? I have Customize several times and it keeps changing back to McLean, VA in English.
[email protected]

'''''What''''' webpage do you have set as your homepage? 
Are you saving cookies for that page?

TS2784 I have set my iphone5 time settings to automatic New York time. Throughout the day the clock keeps changing times on its own by hours. Sometimes in is correct. Sometimes it is wrong.

I have set my iphone5 time settings to automatic at New York time. Throughout the day the date and time on the phone keeps changing on its own and often by a few hours. Sometimes it goes to the correct time. Sometimes it is way out. Is there something wrong with my settings?

This is a known issue with the iPhone 5. Turn off the automatic time setting for the time being. It will most likely be corrected in an upcoming update to iOS if the tech press is to be believed.

Why does my iPod clock keep changing and then I can't access anything without connecting charger

Recently my iPod keeps changing time. It's seems to be losing time. When this happens I can't access anything without connecting lead and turning it off briefly.

Could the battery be dying?
Have yu tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.

Satellite P100 - time clock keeps changing

The clock on my Satellite P100 keeps changing (running Win XP MCE) randomly during the day while it is powered on.
When I start up PC in morning, clock is similar time to when I switched it off the day before.
I use my PC in my office connected to mains power. For the first few months of ownership I left main battery out of computer because I wanted to preserve it's life. I don't want to run on battery power and go through a charge-discharge process all day long while I am working. I wondered if this might be the problem and now keep the main battery plugged in all the time but the clock still keeps changing.
The clock does not change by precise hours, but to an almost random time sometime before the correct time. Sometimes a few minutes, sometimes a couple of hours.
I have installed and run all the latest anti-virus, spyware etc. etc. and nothing is detected.
Does it look like my CMOS/RTC battery faulty?
This is my work computer and I cannot afford to be without it for more than a day. I also do not want to return it with all my company data on the hard disk.
Anyone know how easy it is to replace the RTC battery yourself (I know it will invalidate the warranty) - I am an experienced PC "builder" and can happily take computers apart etc.
I hope someone can offer some advice. Why don't Toshiba have a support line you can call for help??

Unfortunately I have not fixed the problem yet.
As explained in my original post I am reluctant to take the computer back for repair as a) I cannot be without it and b) it has company sensitive data on it.
However, if it will not invalidate the warranty to put a different hard disk in it, I may do that and then use the recovery CD to put it back to how it was when purchased. Then make sure the problem still exists (to eliminiate software issues 100%) and then maybe take it back to the shop - this solves reason b) above, but not reason a) - Maybe I should just take a holiday!!
Once it's fixed I just put my original hard disk back in.

Colour option keeps changing back to grey scale

I imported a photo into illustrator CC and I then live traced it and expanded it. When I select it the colour options are grey scale. I can change the option but if I click off the image the options go back to grey scale. The doc colour set up is cmyk. How do I get it to stay on a different option without having to keep switch it all the time?

Step 1 - import colour photo
Step 2 - change colour options and colour mode to cmyk
Step 3 - Image trace default
Step 4 - expand
Step 5 - direct select parts of expanded image to change the colours
Step 6 - open colour options menu and see that it is grey scale
Step 7 - change it again to cmyk and choose a colour
Step 8 - direct select new part of expanded image
Step 9 - goto colour options again which has changed back to grey scale
Step 10 - change again to cmyk and pick a colour
Maybe this is normal behaviour?? But seems really cumbersome to have to keep on changing it for everything I select. I just want it to stay on cmyk not revert to what is selected.

Clock keeps changing time

The clock on my z1 keeps changing the time I have tried manual setting and network setting still no luck any ideas?
Solved!
Go to Solution.

I would actually advise running a software repair as below in this case as it will likely sort this out for you:
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Renaming radio station: name keeps changing back

If I select a radio station, right click "get info" and change the name on the second tab, the name of the radio station successfully changes. However, much to my annoyance, when I double-click the station, the name changes back to the name broadcasted.
Can I prevent this behavior?
(ITunes 7, Windows XP)

Are you saying that this is another thing that has
stopped working in V7?
Well, dunno. I heard so many people say they like itunes so I decided to try it. In other words, I never tried V6 I just downloaded the newest version.
Since this is not the only issue I've experienced with itunes thus far, I think I will de-install, go back to winamp or whatever and stay away from apple apps for just a little while longer again.
BTW: Thanks for the post polydorus!

Sequence and clip name keeps changing... Why ? Solutions ?

The sequence and clip name on a particular project keeps changing. It usually takes the name of of an audio file. Deleting the preferences, opening the timeline in a new project, making it offline and reconnecting it again, et. all doesn't help ? What is causing this ? HELP
Mac Pro Quad core
Memory 8GB
Storage - XSAN
FCP version 7.0
OS X version 10.5.8
Quicktime 10 & 7.66 both installed
Anyone has a solution for this....
Jp

I made the sequence off line and save it as a new project. Then deleted the preferences and opened the project..... reconnected the media. Most of the clips showed the correct clip name and the sequence name also didn't change. But a few audio tracks still had the old problem....
Thanks for the reply.... haven't updated yet..

Environment fonts keep changing back to default

In order for my UIs to look good on all my deployed systems (usually windows xp or 7) I change all the environmental fonts (Tools>Options>Environmental>Fonts) to Tahoma (and, of course, set the init file to use tahoma for all these fonts). Lately I've been noticing that every once in a while I will open LabVIEW and the fonts will be changed back to their defaults. Has anyone else had this issue or does anyone have a good work around? It is frustrating because I usually don't notice this has happened until I've finished aligning multiple elements and then realize I have to change the font and align them again.
Note: I'm developing in LabVIEW 2012 on a Windows 7 pc.

Hey Gollum,
I found what seems to be causing your issue. There is a bug in LabVIEW 2010 and later that causes custom font tokens to be overwritten when any other change occurs in the LabVIEW.ini file. The Corrective Action Request (CAR) ID Number is 256978. The issue was fixed in LabVIEW 2013 (http://www.ni.com/white-paper/14541/en/).
Regards,
Ian K.
Applications Engineer
National Instruments

Why do the Search Engine options keep changing back?

Hi, I have a large collection of search engines, which I keep well organized with the addon Organize Search Engines.
https://addons.mozilla.org/en-US/firefox/addon/organize-search-engines/
I needed to make changes to many of the search engines I've added to make them work. i.e. I had to go to Manage Search Engines, right-click on the relevant engine and choose properties to change its options (just right-clicking "Add To Search Bar" on a search box won't work on a lot of web sites unless you modify the options/settings).
Anyway, the problem seems to be that after a few firefox restarts, the modified search engines seem to revert to their default values. Confusingly, it doesn't happen to all of them. Just ones I've recently added.
I've toggled the Automatically Update Search Engines in Firefox's Advanced options or the Show Search suggestions in Manage Search Engines.
I've tried re-installing firefox and putting in the new profile and re-installing the addons I use individually (although I had to copy over the extensions folder to my new profile). It didn't seem to help.
Help a brother out.

Hello  ,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
WARNING:Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be easily recovered unless they have been backed up to an external device! See [[Back up and restore information in Firefox profiles]]. 
Please report back to say if this helped you!
Thank you.

Clock time keeps changing by 12 hours

I have a 3rd Gen Touch that was my husband's before he got an iPhone. One day I noticed the calendar was showing the wrong day. On closer inspection, the problem was that the time was off by 12 hours. Instead of Wednesday 9 am it said Tuesday 9 pm. I went into Settings to fix it, making sure I had the AM/PM correct. Several days later I noticed it was off again.
Five days ago I corrected it again. Today, it is again off by 12 hours, telling me it is 4 am rather than 4 pm. This makes it pretty useless as an alarm! Any idea what's going on and how to fix it?

First, go to Settings > General > Date & Time and make sure you selected a time zone that is the same as the one you live in. Set the correct date and time.
Next, go the the date and time settings on your computer and make sure the correct time zone is selected and the clock is set properly. Sync your touch and make sure the times match.

Clock keeps changing back 4 hours..why?

Similar Messages

Maybe you are looking for