Clock keeps changing time

The clock on my z1 keeps changing the time I have tried manual setting and network setting still no luck any ideas?
Solved!
Go to Solution.

I would actually advise running a software repair as below in this case as it will likely sort this out for you:
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
Don't forget to mark posts that answers the topic as Accepted Solution. 
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • TS2784 I have set my iphone5 time settings to automatic New York time. Throughout the day the clock keeps changing times on its own by hours. Sometimes in is correct. Sometimes it is wrong.

    I have set my iphone5 time settings to automatic at New York time. Throughout the day the date and time on the phone keeps changing on its own and often by a few hours. Sometimes it goes to the correct time. Sometimes it is way out. Is there something wrong with my settings?

    This is a known issue with the iPhone 5. Turn off the automatic time setting for the time being. It will most likely be corrected in an upcoming update to iOS if the tech press is to be believed.

  • Why does my iPod clock keep changing and then I can't access anything without connecting charger

    Recently my iPod keeps changing time. It's seems to be losing time. When this happens I can't access anything without connecting lead and turning it off briefly.

    Could the battery be dying?
    Have yu tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.

  • Satellite P100 - time clock keeps changing

    The clock on my Satellite P100 keeps changing (running Win XP MCE) randomly during the day while it is powered on.
    When I start up PC in morning, clock is similar time to when I switched it off the day before.
    I use my PC in my office connected to mains power. For the first few months of ownership I left main battery out of computer because I wanted to preserve it's life. I don't want to run on battery power and go through a charge-discharge process all day long while I am working. I wondered if this might be the problem and now keep the main battery plugged in all the time but the clock still keeps changing.
    The clock does not change by precise hours, but to an almost random time sometime before the correct time. Sometimes a few minutes, sometimes a couple of hours.
    I have installed and run all the latest anti-virus, spyware etc. etc. and nothing is detected.
    Does it look like my CMOS/RTC battery faulty?
    This is my work computer and I cannot afford to be without it for more than a day. I also do not want to return it with all my company data on the hard disk.
    Anyone know how easy it is to replace the RTC battery yourself (I know it will invalidate the warranty) - I am an experienced PC "builder" and can happily take computers apart etc.
    I hope someone can offer some advice. Why don't Toshiba have a support line you can call for help??

    Unfortunately I have not fixed the problem yet.
    As explained in my original post I am reluctant to take the computer back for repair as a) I cannot be without it and b) it has company sensitive data on it.
    However, if it will not invalidate the warranty to put a different hard disk in it, I may do that and then use the recovery CD to put it back to how it was when purchased. Then make sure the problem still exists (to eliminiate software issues 100%) and then maybe take it back to the shop - this solves reason b) above, but not reason a) - Maybe I should just take a holiday!!
    Once it's fixed I just put my original hard disk back in.

  • My Clock Keeps Setting Time Wrong

    Hi there,
    I have a 15" MacBook Pro from Dec 2011 which has a bit of a problem. Recently (within the last couple of months), the clock keeps setting itself ahead 3 hours. I have no idea why. I even unchecked it setting from the clock at apple, and took my city out. But almost every time that I log in, it sets itself ahead three hours, and sometimes a whole day and three hours forward.
    I reset the SMC, as well as the PRAM. It still does it most of the time (sometimes it does get it right).
    I have no idea what to do anymore. I've looked online and couldn't find any other recommendations, so I'm wondering if anyone else had some ideas.
    Running Mavericks btw.
    Thanks for any help or info.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Ical keeps changing times, adding hours or days to events!

    I keep finding events are changing from their original saved format across all my devices. For example I will create an event to start on May 3 at 9.00 and end on May 3 at 10.00 I will come back to it later and find it has a different start time (usually 2 hours earlier) or a different end date 24 hours later.
    I thought it was me making mistakes, but it is happening far to often and my wife's entries will do the same.
    An

    Hello David,
    This looks like you are entering your events with a different timezone setting then your system time.
    Have you set your iCal to a timezone different from your computer's timezone ( look at the top right of the iCal window)? And what timezones are your mobile devices set to? e.g. on your iPad under Settings > Mail, Contacts, Calendars > Calendars > Time Zone Support ? Try to set all devices to the same timezone (if they are in the same timezone).
    Regards
    Léonie

  • Calendar keeps changing time

    Not sure if its since the clocks went back in the UK bur ever time I add an appointment to my calendar within seconds the time changes by an hour e.g. I put in for 9.00 and now shows as 8.00 I have changed and saved by still reverts to 8.00

    Hi @suedh20 ,
    On a PC, log in to https://account.live.com/SummaryPage.aspx with the same credentials as used on the phone, and edit the information to match where you are. Save and exit.
    On the phone, Menu -> Settings - check again for correctly set date+time and region.
    On the phone, Menu -> Settings -> email+accounts - long press the Microsoft account and select sync.
    Double check future appointments for the correct time and try entering a new appointment, to verify it works correctly?

  • Clock keeps changing

    I set my clock for a regular reading but it keeps switching to military time.

    Hi Verafy306, sorry to hear that you are not able to get the time to stay consistent on your computer. So I can better research this issue, may I please have the exact model number of your computer? Also, what is the exact version of Windows you are using? Is it Windows 7 or Windows 8? They are two different operating systems entirely. Once I have all the information that I have requested, I will then be able to research the issue and hopefully get it resolved for you.
    Thank you for your time and patience.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • System clock keeps changing on KT400 MS 6590

    Hi Guys,
    I'm not sure why but my system clock seems to change. The problem isn't every time I log into Windows XP but at random. If I restart then the clock goes to the correct time again. Is there any way of correcting this other than changing the times in Windows and the BIOS. I have also tried clearing the COMS, but this hasn't worked either.
    Thanks for any help you can provide.
    Richard.

    99 percent of boards are a cr2032
    any big chemist,camera shop,most corner shops
    pop the old one out
    there is a little tag
    put new in make sure its same way round
    you might find bios is reset and needs resetting

  • Ical keeps changing times!!!

    I input an event and go back a few days later and the event times have been changed.
    Eg) 9:30 to 5 becomes 9:30 to 10:30 (or other random end time).
    This happens almost every week as i input my work schedule a week at a time. It sometimes differs from day to day so each event is a stand alone input.
    To top it off, I checked today and all the times I had inputted 2 weeks ago for last week's work sched had ALL been changed to the EXACT same end time...not the original one. Thank gawd I kept the original schedule on pdf.
    I sync the iPhone G3 S through Mobile Me. Had same issue with iCal when syncing with G3.
    Any feedback would be great as this is driving me to go back to Google.

    Did you ever get this fixed? My wife has just hit this and I'm looking for a solution.
    My guesses at this point are to repair file permissions or maybe trash the preferences as these are common ways to fix a lot of things.

  • Clock keeps changing back 4 hours..why?

    it is set to Boston, USA time zone but every two days or so it reverts back 4 hours. Is there something I am missing?

    I too am having the same problem.
    Even if I manually set the time instead of using the time servers the time decreases by 4 hours.

  • My iphone 5s keeps changing time on its own and keeps disconnecting from the wifi and cellular data. All other devices are connected and working. Is it a virus?

    What can i do to fix it? My husband suggests I reset my phone but I'm afraid my data will be wiped off an that would be of total waste if the problem doesn't even get solved. Your help would be much appreciated!

    There is no known malware capable of infecting an iPhone that has not been jailbroken (ie, hacked to allow apps from outside the App Store). If you have jailbroken it, you have exposed yourself to malware, and should restore the phone to factory defaults, without restoring a backup. All data will be lost, but that is unavoidable.
    Most likely, you haven't jailbroken it, in which case you don't have to worry about malware. In that case, it's hard to say what's going on, but there are some things you can try.
    First, try resetting your device. Press and hold both the home button and the sleep/wake button for about 10 seconds, until the screen turns off. Ignore the slider that will appear. Release the buttons, then press and hold the sleep/wake button until the Apple logo appears. This is the equivalent of a reboot, and should not affect your data or apps.
    If that doesn't help, try restoring your device from backups, and if that doesn't help, restore it to factory settings (ie, do not restore a backup). See:
    http://support.apple.com/kb/ht1414
    If none of that helps, the issue is caused by some kind of hardware problem, and the device will need to be repaired or (more likely) replaced.

  • Time on server keeps changing

    Hi,
    I'm having a problem with one of my servers.
    It is a Xen-guest Windows 2008R2 STD running IIS.
    Timezone is UTC+1.
    It keeps changing time just a few minutes after it has sync the correct time with the NTP.
    As you can in the XML from the event log it changes two hours but the actual time is two hours ahead of the "OldTime" when the change happens.
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
      <Provider Name="Microsoft-Windows-Kernel-General" Guid="{A68CA8B7-004F-D7B6-A698-07E2DE0F1F5D}" />
      <EventID>1</EventID>
      <Version>0</Version>
      <Level>4</Level>
      <Task>0</Task>
      <Opcode>0</Opcode>
      <Keywords>0x8000000000000010</Keywords>
      <TimeCreated SystemTime="2013-08-28T12:43:21.810110300Z" />
      <EventRecordID>62064</EventRecordID>
      <Correlation />
      <Execution ProcessID="832" ThreadID="4436" />
      <Channel>System</Channel>
      <Computer>GS4</Computer>
      <Security UserID="S-1-5-19" />
      </System>
    - <EventData>
      <Data Name="NewTime">2013-08-28T12:43:21.810110300Z</Data>
      <Data Name="OldTime">2013-08-28T14:42:57.015625000Z</Data>
      </EventData>
      </Event>

    Hi,
    Here is a good article about Hyper-V time synchronization, I hope it will help you:
    Hyper V Time Synchronization on a Windows Based Network
    http://kevingreeneitblog.blogspot.in/2011/01/hyper-v-time-synchronization-on-windows.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If these links we provided couldn’t fix your problem, please release another post on
    Windows Server Hyper-V Forum to get more professional support:
    Windows Server Hyper-V Forum
    http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Amy Wang

  • Time keeps changing on phone

    iphone 5 keeps changing time.  About 1/2 hour.

    Check Settings > General > Date & Time >
         Set Automatically: ON?
         Time Zone > your city?
    Try a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Issues with clock - keeps switching to incorrect time?

    The clock on my Iphone 5S keeps changing to a different time, at 8AM is said it was 2. I restarted it and it worked for a little while then went back to 2 again. It has done it two more times today... I have not done the most recent software update to my phone.

    Hey abcal,
    Thanks for the question. If I understand correctly, the time keeps changing. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting issues with date and time
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

Maybe you are looking for

  • Open URL from SAP GUI

    Hi, I create Business Contacts with BAPI_BCONTACT_CREATEFROMDATA from an external application. Is it possible to add a URL to this contact, that can be opened from the SAP GUI? Our customer uses the native windows sap gui. The browser should open and

  • SWT run fine by itself, not with JWS

    Hi, dear all, I am relatively new with Java web start. I encountered some problem while deploying my stand-alone SWT application as web start application. The SWT application run sucessfully from IDE within JBoss environment. But if I run it from jnl

  • Data Load performance in BI7.0

    Hi, I have a generic question regarding BI7.0. From the perspective of data load performance what are the features  that BI7.0 has compared to earlier versions. Thanks in advance,, Rama Murthy

  • Can't find photoshop?

    I just installed my student version of Adobe Creative Suite 6 Design Standard and everything appears to be working so in design, illustrator and acrobat but for some reason photoshop is not coming up anywhere? it's like it was never downloaded. I nee

  • FormAutomation AFORMAUTLib's AFormApp() Method throws COMException when running under an account wit

    Hi, I've a VB application that uses the AFORMAUTLib library to create buttons in a PDF document. To do that I can use the AFORMAUTLib's AFormApp method to create an object that allows me to add the button using the following code (for example): Line