Clock stops running halting all operations on LaserJet M1522n MFP

Greetings . . .
My LaserJet M1522n MFP worked flawlessly for nearly a year. Then, the clock stops advancing in the display and all functions stop. No error messages.
Curiously, when I reboot, it will perform any function selected immediately on reboot . . . until the clock stops advancing within 3 to 5 minutes. NOTE: Whenever I reboot, the clock shows the correct time.
Have written to HP, but did not receive a reply!
At times, the unit struggles to reboot requiring it be turned off. It seems it must sit for 5 or more minutes before it can boot again.
My guess is that the problem is very minor, or, a corrupted boot sequence.
Any insight you can provide will be greatly appreciated. The unit is not used much and is 2 years old now.
THANX
Bob Horn

Similar Messages

When I lock my iPhone 5c, the clock stops running.

Hi.
I have a Green iPhone 5c (GSM).
Every time I lock the phone, it - without fail - stops keeping time.
The clock just stops.
Also, my WiFi and Bluetooth crash, and "flicker" often.
Thanks, Will.

Easy fix and you shouldn't have wasted a trip to the store. To fix, simpy backup your iPhone via iTunes and then click the Restore iPhone button. Once you restore and add everything back, if the problem still continues you will need to restore the iphone again, however you will then need to set it up as a new device and start adding your data back manually. This will isolate what's causing this issue. However the initial backup/restore should take care of the issue. It's not a hardware problem - it's a software issue.

Urgent: OA page stopped running at all

I have developed some OA page using jdeveloper and ran successfully previously. But after one week, when i run the page, the page is not running; it shows waiting for long time and no error message in jdeveloper log.The log is:
Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\jdk1.4.2\bin\javaw.exe -client -classpath C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\j2ee\home\oc4j.jar;C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\jdev\lib\jdev-oc4j.jar -Xbootclasspath/p:C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\jdev\appslibrt\ojdbc14.jar;C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\jdev\appslibrt\nls_charset12.zip -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true -DRUN_FROM_JDEV=true -mx256m -Dhttp.proxyHost=10.10.20.49 -Dhttp.proxyPort=3828 -Dhttp.nonProxyHosts=*portal*|*gp* -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 com.evermind.server.OC4JServer -config C:\OracleSoft\p4045639_11i_GENERIC\jdevhome\jdev\system9.0.3.5.1312\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 8500 ms.
Auto-deploying OA Framework web application deployment descriptor (New server version detected)...
Oracle9iAS (9.0.3.1.0) Containers for J2EE initialized
TIME: runregion: initialization [15 ms]
Tutalii: C:\OracleSoft\p4045639_11i_GENERIC\jdevbin\jdev\appslibrt\iasjoc.zip archive
------at this point, it got stuck.
within this week two patches are applied in the erp instance:
Patch NO. 5130830
Description: Oracle Purchasing: Approval Issues - funds override does not work, Approval action history recorded incorrectly, wrong printer chosen for printing the document, Create doc workflow fails after patch 4871481.
Patch NO. 5680612
Description: In Oracle Purchasing the few purchasing and requisitions action history were not proper.
i dont know whether these pathces affect that.
Please help me running my page..................

Shafiul,
Let the process be running, it will timeout at some point and should give some more log details. Did you try running a simple new page to make sure that your setup is correct?
--Shiv

TS1367 How do you get computer to respond when the track ball halts all operation

How do I make this rainbow track ball disappear?

Remove old Apple programs, and use Explorer web-browser. (Firefox or Chrome will not do)

Windows Server 2008 R2 clock stops

I have a server where the clock stops running. It just locks up in place. I can login and it will be stopped at a time and date 3 days ago. I have tried setting it to the time of another server but receive "System Error 5 has occurred, access is denied".
I also tried syncing with internet time but also receive "access is denied" I am logged in with the local administrator account. My last thought is that there is something wrong with the motherboard/BIOS on this server. I was hoping someone may have
seen this before and could lend some ideas.
Vincent Sprague

I'd agree. I'd check the system board manufacturer's web site for an updated system bios.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, why not 3G ?

When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.

The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
Try turning off your firewall and anti virus software while you try to download the iOS update.

Count down clock stops on ebay when placing bid in box,safari,ok opera,& firefox

Safari,
Count down clock stops when placing bid on Ebay, by clicking place bid box,have to use stop watch when getting to the last few seconds,ok on Opera,and Firefox,i have cleared cache,cookies and reset Safari.HELP please

UPDATE: I had 36 Safari windows open and minimized on the dock from my last session; 20 of those windows failed to open b/c Safari "couldn't find the server"; I just went to the URL bar of all 20 pages and clicked return, and all 20 pages loaded perfectly, without dropping any images or losing formatting. This is a puzzle!!!

I have the lastest (10.7) I tunes software running on a 64 bit windows 7 system. Today it stopped running all of the tv shows I have downloaded. The error message says that a "problem has stopped i tunes from working and windows is shutting it down" ?

i have the latest (10.7) itunes installed on a 64 bit Windows 7 based system. Up unitil today I had NO problem running the TV shows that I have downloaded from I Tunes.
Today it stopped running all videos. It loads the information in the top box about length & name. An error message pops saying "an error has caused I tunes to stop working". "Windows will check for a solution and notify if therer is a solution."
Music plays fine so i know that something works on itunes.
Any ideas?

Try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

I have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.

have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, you may have to take the MBP to the Apple Store to have it checked.
Best

How do I drop all outputs out/off when my vi stops running?

Hello,
I noticed when I stopped running my vi (targetted to RT) from my host computer that my program in the FP2020 continues to run, ie. all outputs that were on stay on. I'm used to the PLC world which stops all outputs when program is stopped. Is there a way to accomplish this with my FP2020 I/O?
Regards,
John

John,
There is a feature that solves this exact issue. It is called a Network Watchdog, and you can configure it in Measurement & Automation Explorer. You can set this up to set your outputs to chosen values whenever you lose network connection for a specified amount of time.
There is a tutorial on configuring the FieldPoint Watchdog at http://zone.ni.com/devzone/conceptd.nsf/webmain/fb7aabacc2bab99686256c7e0080e60a
You have to enable the network watchdog for the FieldPoint bank, then enable the watchdog for the modules you want and specify values for each channel.
Michael P
National Instruments

FIREFOX 17.0.1 Linux/Ubuntu(12.04) some videos from US sites do not run at all - they work OK using OPERA

I have tried to load
http://www.azcardinals.com/videos-photos/videos/Arizona-Cardinals-vs-Seattle-Seahawks-highlights/bf5a326d-1931-4afa-a9bc-6c2eec6b8013#
with no joy on FIREFOX just get blank box with loading icon
-- runs ok with OPERA 12.11

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Flash has stopped a potentially unsafe operation (all files are local)

We trying to run a small flash movie locally from a local html with some javascripts to communicate to and from the flash movie and it worked fine
however sometime late last year we started seing this message pop up. So it must been some changes in flash and/or in the browsers.
Running IE9 in compaility mode allows the flashmovie to work correctly.
Now we want this to work on Mac as well and I can't get Safari to avoid this.
Main problem is that for whatever reason Flash thinks the local html file is internet-enabled. The error box is not saying a link to an internet site, just like this:
Adobe Flash Player has stopped a potentially unsafe operation.
The following local application on your computer or network:
C:\location\file.swf
is trying to communicate with this Internet-enabled location:
C:\location\file.html
Why can't we no longer run flash movies locally like this. There is no interaction with internet in any of the files.
How do we fix it, having the users add the directory in Trusted locations in Flash Global Settings is not a good way.

either adjust your security settings: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
or, test online.

All my Apps on iPod 3 stopped running suddenly. Tried Reset also, still no change. Pls Help

All my Apps on iPod 3 stopped running suddenly. Tried Reset also, still no change. Pls Help

Update the version of your software to current and latest updated version, it will be fine.

All on a sudden my Mac Book air with Maverick' Finder stop running

All on a sudden in my Mac Book air, Finder stop running, my apps in the desktop disappeared, 2 folders are opened in the desktop & appeared busy, I can not even force closed them. I tried to relaunch Finder & many times also tried to force closed. Even after re start, the problem remain the same, Finder does not run & it does not allow to work with the macbook air. Can I get kind help?

Those same applications are in folders on my pair of iMacs (one set up via Migration Assistant and one installed from scratch) and my MBA also (also installed from scratch). If you have applications such as Safari, Dictionary, QuickTime Player, Mail, Stickies and TextEdit which are not in folders, then your system would appear to be quite normal and nothing to worry about.
You can manually move applications out from the folders if you wish (though this can prevent them updating correctly), or for quick access, do as I do which is to add them to the dock - just drag the application icon to your prefered location on the dock for it to be available with a single click without having to navigate through the application folder at all.

HP LaserJet Pro MFP M127fw installer stopped working

Have dificulty installing HP LaserJet Pro MFP M127fw drivers on hp 32bit laptop with windows 7
Build in printer software stops halfway
Downloaded software stops halfway
Standard windows 7 printer driver works fine and can print with it, but has no scanner driver
HP printer scanner doctor indicates scan software is not installed and directs me to driver download on hp website
installation of this software stops also halfway
No errorcodes anywhere, just message box installer could not continue and trying to find a solution. That box diapears as well.
Installation fails on both wired network and usb
no errormessages in windows logbooks
The http connection works fine
tried installation with smart install on and off (is off at the moment)
Spooler service is running fine
Searched this forum and more people seem to have this problem but there is no solution mentioned in the end.
Please help
This question was solved.
View Solution.

Hi @Lize2 ,
I see that you are having issues installing the printer, the installer stops working. Thanks for providing that detailed information. I would like to help you out today.
It sounds like something is blocking the software from installing, since just the driver are being installed.
Disconnect the USB cable, run the uninstall from the CD.
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
Do a msconfig to turn off any startup programs that might be interfering with the installation.
Click on Start, in the search box type in Run, enter, then type in Msconfig, click OK.
Click the Services tab. Click to select the Hide All Microsoft Services check box. Click Disable All, and then click OK.
Then click on the Start Up tab at the top. Click on disable all.
Reboot the computer.
Temporarily turn off any Antivirus software and Real Time Scanning. Especially if you are using Mcafee.
Then run the installation again. Right click on the install and select Run as Administrator.
Test the printer again.
Then go back into msconfig and Enable the All Microsoft Services and Enable All on the Start Up tab. Turn the Antivirus software back on again and the Real Time Scanning.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Clock stops running halting all operations on LaserJet M1522n MFP

Similar Messages

Maybe you are looking for