Clock wasn't updated w/new DST rules.

Hi,
Today, march 11th, start the new DST (Daylight Savings Time) rules for North America countries and some other places around the world. Apple released the update for it in February 15th <http://www.apple.com/support/downloads/daylightsavingtimeupdatetiger.html> which I downloaded through Software Update on the same week.
Strangely, the 11th arrived and my system clock wasn't updated automatically in accordance to the new rules. I live in the Havana time zone (GMT -05:00) and Cuba also follows the new rules applied by US.
My date & time preferences are set to update automatically using the "Apple Americas/U.S. (time.apple.com)".
I've already looked into this article: <http://www.info.apple.com/kbnum/n305056> to see if Cuba was also included in the update, but it just mentions "several other regions", not specifying them. I already sent Apple a feedback on this article requesting more information on which regions it updates.
So, can anyone help me on this issue?
Thanks in advance for any help.
iBook G4 800 MHz 12” Mac OS X (10.4.8)

Thanks Tom for the reply and yes, I do get the correct time when I set to Philadelphia (I used to live there ) for example.
But in another thread, also about DST, a fellow user gave me a hint about my problem. Check this: http://discussions.apple.com/message.jspa?messageID=4220949#4220949
Also, the new Tiger update (10.4.9) addresses the new DST rules by what I read from the article <http://docs.info.apple.com/article.html?artnum=304821> in the "Other section:
Includes the Daylight Savings Time Update (released February 15, 2007) which contains the latest worldwide time zone and Daylight Saving Time (DST) rules as of January 8, 2007.
I'll try to update my Mac and see if it works (because that's not an easy task when using an horrible dial-up connection fo 33.6 Kbps here in Cuba).

Similar Messages

Has anyone verified jdk1.3.1_19 has the new DST rule as Sun advertizes?

Hi Everyone,
Has anyone verified that jdk1.3.1_19 does not actually have the new Daylight saving time rule mandated by Congress starting 2007 although Sun claims that it does? I tried jdk1.3.1_18 and jdk1.3.1_19. They do not have the new DST rule. I tried jdk1.4.1_11 and it has the new DST rule. Could anyone enlighten me about jdk1.3.1_18(19) if you know about the DST issue with these two JVM's? Thanks.
Alan Lei

We have legacy code running on legacy platforms that cannot be just retired unfortunately. It would be great if we could simply eliminate it overnight. The following is the code that I used to gauge whether the JVM has the new DST rule.
int year = 2007;
int month =10;
int dateOfMonth = 1;
int hour = 1;
int minute = 0;
GregorianCalendar gc = new GregorianCalendar(year, month, dateOfMonth, hour, minute);
Date date = gc.getTime();
System.out.println("displayed name=" + timeZone.getDisplayName() +
" dst?=" + timeZone.useDaylightTime() +
" date=" + date.toString() +
" in dst?=" + timeZone.inDaylightTime(date));
Alan Lei

I got a new iPhone 5 and since it wasn't updated to ios 8 version it didn't let me use my latest update, now I can't login to my iCloud without it saying it's incorrect but it does let me reset it and I use the password still tells me wrong Apple Id

I recently received a new iPhone 5 to replace my old broken iPhone 5 I backed up my old broken iPhone 5 into iCloud I checked to see it was all there, when it came to set up my new iPhone 5 my new iPhone 5 wasn't updated to the latest version my old one had ios8 my new one has ios7 so it gave me the choice to use another back up date which was from a year ago and I used to have another email as my primary for Apple ID and now my new iPhone is setup with my old Apple ID and every time I try to log in it tells me it's incorrect I reset the password but since it's another email it won't let me log on what can I do?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

STZBC table need to be updated correctly for DST Brazil Change.

Hi All,
STZBC table need to be updated correctly for DST Brazil Change.
I see two options to change it:
1) Create a new line for 2009 in STZBC -> Variable time zone rule in DT1 and create the transport
2) Apply SAP Note 198411 (attached) in DT1 and create the transport
I have have concern for daylight saving as according to Note 1251372 there is no standard daylight saving time in brazil .
this note mention daylight saving for 2008/2009 (i,e daylight saving time in Brazil begins on October 19, 2008 and ends on February 15, 2009.) and this note is the latest note available.
what would be daylight saving time in brazil for year 2009/2010? should i need to raise message to SAP asking for any new note applicable to daylight saving?
Thanks for your help in advance.
Thanks&Regards
Shams

done

How do I STOP this from updating to NEW VERSION? I am getting tired of uninstalling and reinstalling every 10 uses. Ver.10 is Garbage!!!!!

how do I STOP this from updating to NEW VERSION? I am getting tired of uninstalling and reinstalling every 10 uses. Ver.10 is Garbage!!!!!
WHEN it decides to run it does NOT member passwords.
And besides, if I WANTED NEW I would DOWNLOAD NEW!!!
''[Profanity removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file firefox.js that overrides the update URL with a wrong link.
Do a clean reinstall and be sure to remove the Firefox program folder.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* [/questions/826858]

How to update XML Facts in rule author

Hi,
since there is not a separate forum for the rules engine and this is tightly related to BPEL, so I thought I'd post the question here.
what's the process to update XML Facts in the rule author and the BPEL process that is already using the rule repository for decisions?
for example, if I change the data type on one of the elements in the XML Facts schema from string to int, what do I do next to put such change into the existing rule repository and update the BPEL side of things?
I have tried re-importing the updated XSD into the rule repository (it's a WebDAV repository), I can see the change in the new definitions for the xsd, and I can also make use of the change to define new rules, in the words, the rule author side seems fine;
then I copied the updated xsd into my BPEL project that calls the rules engine, and then what should I do next? I can't see any where in jDeveloper I can "update" the decision service partner link, so I just re-deployed the BPEL process with the updated xsd under the rule/xsd folder, but then the same call to the decision service starts failing with a "business exception, cx-fault-actor" but without any more details.
I haven't added any new rules, only change of data type on one element.
what am I missing?
thanks.

In ALDSP 2.5 (and ALDSP 3.0), non-XA data sources can be updated without writing an update-override. But if you want to do any special processing that is not handled by the default behaviour, or for data services not based on relational databases, in ALDSP 2.5, you can write an update-override.
In ALDSP 3.0, the update model is somewhat different, I suggest that you peruse the ALDSP 3.0 documentation for a thorough discussion. The documentation is here http://edocs.bea.com/aldsp/docs30/index.html I suggest start with a search on 'update'.
In ALDSP 3.0, I believe updateoverride feature still exists for the purpose of backwards compatibility (at least it turned up in a search of updateoverride in the 3.0 docs)

Solaris 10 - patch for new DST 2007 changes

I am trying to track down the one patch I need for the new standard for daylight savings time date changes that took effect in 2007. Each time I get one patch and read the readme file, it tells me I need another patch for the U.S. Energy Policy Act for 2005. I am just about to install Solaris 10 patch 119689-07. I don't need any other patch updates, just the bare minimum new DST patch. Thanks for your help.

119689-07 is obsoleted by 118836. http://sunsolve.sun.com/search/document.do?assetkey=1-21-119689-07-1
118836-36 is latest rev of this patch -- the kernel patch, whic has latest timezone data for the OS
You'll need to make sure java has latest tz data, too:
http://java.sun.com/javase/timezones/
As far as I know, these are the bare minimums for a system to function properly re: latest DST schedule

New settlement Rule (copy of superior rule) in spite of message KD050

Hi'
I have a setup where WBS level1 is a Billing element.
WBS level 2-3 are Acc. elements
Settlement Rule for Billing element are maintained manual.
Settlement Rule for Acc. elements are copyed from superior rule.
I have generated Settlement rule, the projects are "running", the first settlement has been sucesfully completed.
Now the organisation is changed and the Settlement rule should have a different Profit center.
I put an end period at the Settlement rule at WBS level 1.
I create a new Settlement Rule at WBS level 1.
I put an end period at the generated Settlement rule at WBS level 2-3.
Now I want to generate Settlement Rule again at WBS level 2-3.
That is not possible because a settlement rule already exist.
What can I do to get a new and updated Settlement Rule at WBS level 2-3?
Thank you in advance for advice!
Kind regards
Lone Würtz

Hi Lone,
actually the request was raised by customer some year before, and I have done the implementation.
After SAP_APP 603, there is a BAdI IF_EX_WBS_SETTLEMENT_RULE_NEW~GET_TEMPLATE
what you need do, is to set the flag 'E_INHERITED_OK' = 'X'.
For a more complex case, you can even change the 'E_TEMPLATE_OBJNR' to use other WBS (instead of direct upplying WBS) as template.
If you have lower Release, where the BAdI WBS_SETTLEMENT_RULE_NEW is not available, please let me known your customer ID, there is a pilot note as modification for it, I can add it in the pilotlist.
Kind regards,
Zhenbo

TS1702 The appstore in my iPad is not working properly. It's not downloading either updates or new purchases of apps, stucks at "waiting" status an do not load them.

The appstore in my iPad is not working properly. It's not downloading either updates or new purchases of apps, stucks at "waiting" status an do not load them. I had to go through iTunes in my computer and sync.

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Iphone 3GS is stuck at backing up window when trying to update to new 4.0

Hello,
I need help...I've been trying to update both mine and my wifes iphone 3gs to the new update 4.0 for two days now...I am so fustrated. I tried unplugging and restarting the computer several time..nothing..I've tried updating the USB driver...nothing. Itunes is up to date and both phones are on verison 3.1.3. Evch time I try and update them...itunes just gets stuck at the "Backing up Iphone" stage...for hours!! Can anyone help?

I was having this problem yesterday - I tried backing up by pressing sync, and by pressing update. In both cases, the back up froze at about 15%. I even let it run overnight, and someone on one of the threads I read suggested patience, but to no avail.
What finally worked for me was updating iTunes. I suspect it won't be as simple as that for everyone, but I wanted to let you know that it worked for me! I installed the update, restarted, and then pressed sync (I wasn't updating because this was my final backup of the 3GS before I got the iphone 4). The back up took about 2 minutes - the fastest one I have ever witnessed. Best of luck to all of you still having problems.

Create a new css rule

Hi
If I place my curser over a div tag in the code window why in the New Css rule
window, in the option "choose where this rule will be defined" do I sometimes only
have the option of this document only and others the choice of any attached css file?
thanks
Ian

Hi
perhaps I wasn't clear apologies.
If I go to a web page and place my curser in the middle of <div id="masthead>
and then in the css styles panel select "new css rule" when the window opens by default
it normaly says:-
Rule definition...
Choose where your rule will be defined
and then it shows my current cssfile name with a drop downbox for any other
attatched sheets. As in the tabs at the top of the window
However some times when I do this the box listing my css files only lists in "this document only"
and selecting the drop down box shows no other css files. But the css files are shown on the tabs
at the top opf the screen
I wondered if anyone had any idea as to why?
thanks
Ian

FSCM-COL: New Basis Rule for specific contact day

Hi all,
I have an business requirement where i have a few Business Partners that should only be contacted by the specialist like, for example, one time each month or the first Monday of each month.
Since the client didn´t wanu2019t to use the standard functionality of reasubmission I need to create a specific basis rule for it and, by that, forcing that partner to only appear in the woklist for that day.
My idea is to use the functionality of u201CBusiness Hoursu201D (in tab Control under u201CBP Collections Managementu201D role) to map the specific days/calendar of contact and the new basis rule will fetch that info.
Now, my problem is that Iu2019m facing some problems on discovering wich tables/views the info that I updated is stored
Do you guys have any idea on this ?
Thanks in advance.
Best Regards,
Bruno Sousa

hi ,
Based on the requirement for that particular business partner assign different collection stsrategy , where the collection rule CR00000020 is used (customer contacts since N days ) the worklist can be run only on the date fixed for that particular business partner and worklist can be assigned to the collection specialist .
If an enhancement can be carried out for teh collection rule using BADI , in the business add inns the business hours can be included

New DST on Call Manager/Unity

Hello Guys,
I know Cisco has released patches for new DST for Unity and CCM.
The issue is my CCM and Unity are getting their time from NTP.
According to my understanding, NTP network time servers, they are not affected by DST since by definition NTP serves time in the Coordinated Universal Time (UTC) format. DST time offsets are handled by the client operating system.
Hence we will have to review the underlying client operating system settings for the CCM, Unity & Voice gateway.
Is that correct?

Hi Mirza,
You are correct. Like Mike has correctly indicated, NTP just passes off the UTC Time and you will need to perform the applicable OS changes/CCM/Unity changes as indicated. Have a look at the following;
For CCM Readme;
http://ftp-sj.cisco.com/cisco/crypto/3DES/voice/callmgr/4.1/ciscocm.4-1-3-2007-DST-Update.1-0-1-readme.htm
For Unity Field Notice;
http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_field_notice09186a00807dcf40.shtml
Hope this helps!
Rob

Creation of New Default Rule in OPL8

Hi,
In TC : OPL8, in cost accounting tab we maintain the default rule.
Can we create our own default rule?
The issue is we are using the CO-Product scenario in IS MILL. There the two default rules are PP5 and PP6. Both are Full settlement type.
But as we are using Cost Object Hierarchy, we cannot use the Full settlement type. So we want something similar to PP2 but having te features of PP5 or PP6.
Can we achieve this in any way by creating new default rule or how to acheive this.
Regards
Kami

Hi
You can change it in OPL8 when you create New Order Type
Even if you dont change, it will be overwritten by PER when you use Cost Obj Hierarchy
br, Ajay M

Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration?

Clock wasn't updated w/new DST rules.

Similar Messages

Maybe you are looking for