CLOCOC / CPS Error

Trying to create a remote task in closing cockpit following error appear in sap:
"External error: rc='0000000065' (User is not authorized: XXXXX)"
another user with exactly the same profile in sap can create tasks without any problem.
Any ideas?
Edited by: Georg Brauer on Feb 20, 2009 2:00 PM

Within the CPS system, object <sid>_SAP_System on the security tab the user whom is getting the rc='0000000065'  needs to be defined Rank Business Automation User.
also reference Note 1265635 - How to setup BAE (Business Automation Enabler)
Regards,
Tom

Similar Messages

  • Error while adding the server in Redwood CPS

    Hi All,
    Iam getting the following error when addiing the SAP server in Redwood CPS.
    "SAP System XXXXXAn isolated SAP system can't be created in the GLOBAL partition"
    Can any
    Regards
    Kiran

    Hello,
    As per the installation guide you should create an Isolation group first and then create the SAP system when connected in that Isolation group. See also forum entry [here|Re: Create SAP Sytem in Cronacel]
    Regards Gerben

  • Error while reading CPS file in jar

    Hi,
    I am getting error :-
    Error while initializing CAZM Factory : CardAuthorizationManagerFactory : getFactory : in one of my class in WSAD
    Root cause i guess its not reading CPS file which is there in one of the jar file.
    Please help me to get solution.
    Regards,
    Divya

    I am also using a raw file destination using a variable.
    I have set DelayValidation = true on both the DataFlow task and even the Sequence Container.
    I get the same error when I run the entire ssis package, however
    when I run the individual container or individual task it runs without an error.
    Also, something interesting is the error is not the same path as the variable name.
    Warning: The system cannot find the file specified.
    Error: File "C:\Users\MyName\AppData\Local\Temp\GUIDNumber\\RawFileName" cannot be opened for reading. Error may occur when there are no privileges or the file is not found. Exact cause is reported in previous error message.
    The variable is "C:\Temp\ProjectName\RawFileName"
    I have other RawFile sources in this same project, but only this one file is giving me grief.
    Any other suggestions?  Is this a bug?
    Have you set an expression for connection string property of raw file? Is it based on variable/expression or configuration? If yes, check the value of variable/ expression or configuraton item at runtime by putting a breakpoint in the pre execute event of task
    and make sure path value its getting is correct. It may be that path is getting a different value at runtime due to expression/configuration set for it.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Error message in CPS Manual intervention window

    Hi All,
    In Redwood CPS, we get the following error message under the Manual intervention filter in Job monitor.
    JCS-122035: Unable to persist: JCS-XXXXX: @locale2@:(com.redwood.scheduler.exception.Class.persistence.api.PersistenceException$AmbiguousField 'Behavior' 'JCS_JOB0' 'JCS_JOBDEF0' ' aliases=true {Job=Job, a_1=JobDefinition}')
    But as such all the jobs seems to be running fine without any issues.
    Could you throw some light on the error message and its likely consequence if any in the future?
    Thanks,
    Balaji

    Hi,
    Try this:
    tables : BSIS.
    parameter : bukrs like bsis-bukrs.
    at selection-screen.
    if bukrs eq '1000'.
       message 'Co. Code is not allowed' type 'I'.
    endif.
    Thanks,
    Sri.

  • Redwood CPS job goes to status ERROR but job works completes ok in SAP

    Hi
    When I schedule a particular ABAP job to run in SAP from Redwood CPS it always completes with the Error status in CPS, but the job runs okay and ends in the Finished status in SAP.
    I tried a different ABAP job and this ran okay, with the CPS status going to Completed.
    I had a look at the CPS log files for the Erroring job and there were no errors in the 'log' file but in the 'step1/spool1' file there is the line 'Processing completed with errors'. Is CPS doing a little more than SAP as regards checking job statuses and looking in the spool file for errors?
    Checked the operator messages and all it says is:
    Job 1501323 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London)) has aborted due to at least one error while running the jobs in step: Job 1501324 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London))
    - doesn't elaborate why the job has status Error.
    Is this saying the CPS part had an error or the ABAP part??
    Ross

    Hi Anton
    I checked the Return Code Mapping for this system and it is empty. No post running action or a trigger has been configured.
    The first time I was having the error was after setting up a 2 step job chain. When I got the error (and the second step didn't run) I then submitted this first simple step from the job definition SAP_AbapRun in case there was an issue with the way I'd configured the chain; it still errorred though. All I am specifying is the ABAP program name, SAP job name, variant and queue to run on, and it does run okay in SAP.
    When you say "The actual error should be available in the logfile of the SAP job itself" do you mean the joblog as viewing in SM37? There are no errors in there.
    I'll have a play with the Return Code Mapping part as if CPS does search the spool for errors (perhaps by default?) and sets the status to error in CPS, I don't want it to stop the chain - although I guess I can always set the post action of step 1 to 'on error' 'continue'...
    Cheers
    Ross

  • Error when creating Office App projects: "Invalid capability expression at position 29 in the expression "CPS Projects | Test | VisualC"."

    Whenever I try creating a new Office app project (regardless of its a Office or Mail app), I'm encountering the following error:
    Invalid capability expression at position 29 in the expression "CPS Projects | Test | VisualC".
    Also, the project doesn't seem to completely finish creating the Office App template. Only the Scripts folder got created. I've done a search and I can't find any solution. I'm using VS2013, Update 5 CTP.
    Help please!
    Lace

    Hi Lace,
    So you have installed the update 5 CTP 2 here:
    http://www.microsoft.com/en-us/download/details.aspx?id=45508
    Am I right? You create the office app like the following template, am I right?
    Just to make this issue clearly, could you create the Office app before you install this update 5? For example, the latest RTM version for Update package is update 4, did you get this issue if you install the update 4 before? At least, we could know that
    whether it is the update package issue. I could create the office app in my VS2013 with update 4.
    If it still has this issue without the update 5, since you get this issue when you create the default project templates, I think it would be related to your VS Environment.
    Please run the command line:
    devenv.exe /InstallVSTemplates.
    Create a simple Office app, test it again.
    If still no help, maybe you could run your VS in safe mode, so we could know whether it is related to the add-in or extension tool.
    https://msdn.microsoft.com/en-us/library/ms241278.aspx
    If still no help, maybe you could repair your VS, test it again.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Mass Activity - Error in SAP CPS

    Hi guys,
    I am trying to run a mass activity from SAP CPS in the ISU system. I imported the mass activity - 0004, the posting and the document date had to be changed dynamically, so I created a parameter set as shown here.
    Created a job to copy parameters(these two parameters only). Ran the job, the parameters are created and copied to target id FPMA5
    Created a copy of the job SAP_MassActivityTemplateRun -> Used the Target ID as shown and date as today.
    So, I am consuming the Identification FPMA5 from the previous job run here. Tried to run it, getting the below error in the SAP CPS system.
    com.redwood.scheduler.connector.sap.rfc.connection.exception.SapBapiException: BAPI exception while calling /SCJS/ISU_START_MASS_ACTIVITY: E XM 300 RAISE_EXCEPTION {00,341} Runtime error & has occurred [0004,K2,26.05.2014,FPMA5]
    BAPI exception while calling /SCJS/ISU_START_MASS_ACTIVITY: E XM 300 RAISE_EXCEPTION {00,341} Runtime error & has occurred [0004,K2,26.05.2014,FPMA5] [RAISE_EXCEPTION, {00,341}, Runtime error & has occurred, [0004,K2,26.05.2014,FPMA5]]
    Parameters:
      0004
        2014-05-26
      FPMA5
      X
            at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.checkBapiReturnCode(ClientConnectionImpl.java:727)
            at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.call(ClientConnectionImpl.java:533)
            at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection$4.doPerform(AbstractRfcConnection.java:310)
            at com.redwood.scheduler.connector.sap.rfc.connection.RemoteFunctionCall.perform(RemoteFunctionCall.java:147)
            at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.perform(AbstractRfcConnection.java:481)
            at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.execute(AbstractRfcConnection.java:303)
            at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.SapFunctionModuleWrapper.execute(SapFunctionModuleWrapper.java:200)
            at com.redwood.scheduler.connector.sap.rfc.jco.AbstractSapFunctionModule.execute(AbstractSapFunctionModule.java:109)
            at com.redwood.scheduler.connector.sap.rfc.command.impl.AbstractMassActivityRunCommand.startMassActivity(AbstractMassActivityRunCommand.java:264)
            at com.redwood.scheduler.connector.sap.rfc.command.impl.MassActivityTemplateRunCommand.doExecute(MassActivityTemplateRunCommand.java:50)
            at com.redwood.scheduler.connector.sap.rfc.command.impl.AbstractMassActivityCommand.execute(AbstractMassActivityCommand.java:67)
            at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpCommand.doExecute(AbstractXbpCommand.java:84)
            at com.redwood.scheduler.connector.sap.rfc.command.AbstractCommand.execute(AbstractCommand.java:57)
            at com.redwood.scheduler.connector.sap.rfc.service.operation.RunJobOperation.doWork(RunJobOperation.java:136)
            at com.redwood.scheduler.connector.sap.rfc.service.SapJobWork.doWork(SapJobWork.java:38)
            at com.redwood.scheduler.infrastructure.workqueue.Worker.run(Worker.java:76)
            at java.lang.Thread.run(Thread.java:722)
    I now added other parameters into the parameter set, maintained them in the COPY_Parameter job. Even then I get the same error!
    I believe my problem is this - I am able to copy the parameters, but passing them to the Mass activity is somehow failing(I am using the MASS_ACTIVITY_TARGET_ID field output from Copy parameters to MASS_ACTIVITY_ID, which I believe is wrong. But I want to use the copy parameter job's output in the mass activity template run). Please let me know.
    I followed this guide: Importing and Running Mass Activities - SAP Central Process Scheduling by Redwood - SAP Library
    Thanks and regards,
    Pavan

    Hi Pavan,
    To create a job chain-level parameter, proceed as follows:
    Go to Definitions > Job Chains and choose Edit on your job chain
    In the job chain editor, click on the Parameters tab
    Click Add, fill in Name, for example MASS_ACTIVITY_DATE, fill 0 into Display Order.
    In default expression field, fill =Time.expressionNow('truncate day add 3 days')
    Make sure Display is checked, click Save
    Submit the job chain, you will notice that the date is as expected, cancel the submit.
    In the job chain, go to the job for which you want to set the parameter and choose Reference, select the job chain parameter.
    The above will use the date at submit time + 3 days, if you want to use the runtime date, when the job chain starts, you disable Display and enable Runtime, remove 'add 3 days'.
    Hope that helps.
    Regards,
    HP

  • Community Publishing-"Unable to connect to the CPS server" Error

    I am trying to connect to Community publishing.
    I download the Community Publishing Air app, but when I put in my username/password,
    I get this error "Unable to connect to the CPS server. Please make sure your firewall settings allow access to this url:
    http://cps.corp.adobe.com/nioamfpoll".
    I have updated Air, but got the same behavior.
    I am running osx (10.6.6)  on a 8 core Xeon.
    Any suggestions?
    Thanks
    Clay

    Hi Clay,
    Do you have a firewall, or are you behind a corporate firewall that blocks certain ports on your machine?
    What do you see when you visit this URL?
    http://cps.corp.adobe.com
    How about the following URL?
    https://cps.adobe.com/nioamfpoll
    Thanks,
    Puny Sen

  • WebDAV error in CPS 1.11

    Bye bye Adobe. Our University offers an in-house www hosting
    and editing application so I will drop Contribute, Dreamweaver and
    CPS. That's a shame but I cannot spend entire afternoons debugging
    CPS access.
    To recap, I can configure a website connection using
    Dreamweaver CS3. However the second time I attempt to administer
    the website using Contribute, I am refused with the error message
    "WebDAV user name or password is incorrect". I delete the _mm
    folder and I can set up administration again, but on the second
    attempt to logon, I am refused etc etc etc.
    I think it is a problem with CPS writing some xml file into
    the server sites. Not really sure, but I pay Adobe to be sure.
    Adobe doesn't seem to care. No updates to CPS in two years.
    As another forum user opined, we knew it was a bad thing when
    Adobe bought Macromedia.

    Here's a piece of the CPS logs which I believe is
    relevant

  • CPS - Redwood : Error JCS-108003 on an unix platform agent

    Hi,
    I get the following error message u201CJCS-108003: No backends could retrieve the specified jobfile (ID: 664,788); failure possibly transient.u201D
    while running a CPS job on a unix platform agent. Even the command "ls" return that message.
    Could someone help, pls.

    Hi,
    jobs are running now on the platform agent. It was a problem on the security tab of the PA.
    I grant rights to my redwood user and it works after reboot of the PA.
    I'm now dealing with this error below :
    "/home/redwood/agent/var/SAP_RW0_41/PI-DEV/jobs/71565/run_KSH[120]: ./: 0403-006 Execute permission denied"
    eXecute rights is ok on the scripts of the unix target server.
    Re.

  • Error openning the CPS Console

    Hi,
    I've just tried installing CPS on a linux machine we have
    already running JRun.
    I followed the instructions for the WAR file installation.
    However, when I go to log into the CPS Console I get the following
    error.
    Any ideas on what might be wrong? Is there something I'm
    missing in the install/config process?
    One odd point during the installation deploy step, instead of
    see the "Macromedia Contribute Publishing Server" general settings
    dialog - I see the dialog has a title of "Contribute Key Server".
    Is this ok?
    Thanks,
    Greg Mercer
    [email protected]
    [email protected]
    java.lang.NullPointerException
    at
    coldfusion.license.LicenseManager._isSingleIP(LicenseManager.java:171)
    at
    coldfusion.license.LicenseManager.isSingleIP(LicenseManager.java:68)
    at coldfusion.CfmServlet.getFilterChain(CfmServlet.java:65)
    at coldfusion.CfmServlet.service(CfmServlet.java:101)
    at
    coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:115)
    at
    jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at
    jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at
    jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:259)
    at
    jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
    at
    jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    I guess till version 10gr3.1 you only needed to start one server and it allowed to access both admin and service bus console.Yes, in 11g as well you may access the admin and OSB console by just starting the admin server but in 11g OSB configuration gets deployed on OSB server (managed server) and test service also runs over this server.
    Are you saying there is some other server I need to start just for running the test console ????Yes. Managed server osb_server1 needs to be started for deploying, testing and accessing OSB resources.
    As If the OSB server was not running how can I check my published services, modify them and do all the bits and pieces after opening the open the service bus console but not just test them???You can modify and save your configuration without staring OSB server but if you will check in change centre then all the changes being done without starting OSB server will remain in partially activated state.
    I have been using the service bus for 3 years and I have never faced any such issue.With each new release you may get new features and with a major release like 11g, architecture and functionality may change.
    If it all there is some other server I need to start then whats the process to do so ??Open command prompt. Navigate to $Domain_Home/bin and run command
    startManagedWeblogic.cmd <nameOfManagedServer>
    for eg. -
    D:\OFMW11g\mw\user_projects\domains\ofmw_domain\bin>startManagedWebLogic.cmd osb_server1
    Once this server is up and running, try using test console.
    Regards,
    Anuj

  • I cannot import music into my iTunes or import cps, getting error (-50). HELP!! been dealing with this for 2 days

    I am going crazy. Got a new 2tb time capsule and have moved all my music to it and thought I was finally successful (though I have somehow lost some songs and recovered some...though some still cut off right at the end??) but now my biggest issue is itunes will not allow me to import any music, cd or downloaded files. I get the message when importing a cd "error occured while importing the file "song name" An unknown error occured (-50). I get the same error when trying to add downloaded music files also. I am really getting frustrated, itunes did not use to be so difficult to maintain. If we figure this out maybe someone can also help figure out why some songs are cutting off. I  have researched this for a couple of days and unfortunatley am not finding much help. Thanks!!

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • CSCug52239 - CPS-MSP-1RU server showing DIMM Voltage error in VSM 7.0 - 1

    Where is the BIOS update of MSP-1RU-K9 server? I have the same issue about DIMM voltage error.. Please urgent case...
    Thanks.
    Necip TOMURCUK

    Hi Shabeer,
    the first thing is that you are running on a very very low RAM.
    For ECC 6.0 with dual stack SAP System to run you should have atleast 4 GB of RAM.
    For your Dispatcher issue kindly check the status of your Oracle database and the connection from SAP To Database.
    You can check the oracle status using brtools utility.
    Regards,
    Prem

  • I am trying to burn photos onto a dvd and cd but it keeps saying disc burn error. what do i do? i have already went through 5 cps and 1 dvd.

    I have been trying to get these pictures off of my computer so i want to burn them but everytime i try it says disc error. i have tried several different cds. it will say finishing burn but then eject it and says burn disc error.... please help

    How are you burning the photos to the disc?  Via the Share ➙ Burn menu or buy exporting the photos to a folder on the Desktop and then burning that folder to disc?
    The former method creates a mini library on the disk that can only be read and use by a Mac with iPhoto.  The latter method saves just the photos to disc which can be used by any computer.
    What system and iPhoto version are you using?  How much free space do you have on your MacBook Pro? 
    If you're using the Share ➙ Burn method can you burn a disc from the Finder?
    Describe in detail what you're trying so we have a better understanding and can better offer a solution.
    OT

  • Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cps?

    Has anyone ever got the message error occurred while converting the file - you do not have the privilege to make changes - when importing cds?

    Hey amba1015,
    I found an article that talks about similar error messages in relation to importing an audio CD. Check out the recommended troubleshooting steps in here to see if they help:
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/TS1387
    Welcome to Apple Support Communities!
    Have a good one,
    Delgadoh

Maybe you are looking for