Clone a System using falsh archive

Hi All,
I have taken a flash image of "Solaris 10 u10 SPARC". Now planning to burn the image in DVD format. Could you please show me pointers about burning this archive into DVD so that, the same can be used install the same type of hardware without any manual input.
Regards,
Raghu

If you are performing jumpstart installation, you have option of mounting a remote image to perform installation. It will be shown after network configuration or creating the partitions.

Similar Messages

  • How to refresh the database from target to clone system using RMAN ?

    I created the database using RMAN from target (Node A) to clone (Node B)
    I want to refresh the data what are all the changes happened in (Not complete database only chages) target to clone system using RMAN ? or any other way?

    I want to refresh the data what are all the changes
    happened in (Not complete database only chages)
    target to clone system using RMAN ? or any other way?Incremental changes can't apply, once database is open using RMAN or any other B&R method.STREAMS can be use to capture and apply changes.
    Cheer,
    Virag

  • Is there any way to clone a machine using boot camp running WinXP. The Mac side is running Snow Leopard. I want to clone a newly set up machine on to a number of machines in a student lab. I am wanting to clone both particians

    Is there any way to clone a machine using boot camp running WinXP. The Mac side is running Snow Leopard. I want to clone a newly set up machine on to a number of machines in a student lab. I am wanting to clone both particians

    AFAIK, there's no app that'll clone the Mac and PC volumes so you can restore them. System Image Utility.app or Deploy Studio for Mac and Ghost for PC are needed. See these for starters:
    http://clc.its.psu.edu/Labs/Mac/Resources/blastimageconfig/
    http://blog.macadmincorner.com/
    http://lists.apple.com/archives/System-imaging/

  • Plz provide me some documents on how to clone a database using cold backup

    Dear All,
    Please provide me some documents on how to clone a database using cold backup which is in archive log.
    Also, please can you provide me the document to install Oracle 9.2.0.6 on Aix 5L
    Thanks,
    Mahipal

    Please provide me some documents on how to clone a database using cold >backup which is in archive loghttp://www.oracle-base.com/articles/9i/DuplicateDatabaseUsingRMAN9i.php
    please can you provide me the document to install Oracle 9.2.0.6 on Aix 5L
    Oracle9i Installation Guide
    Release 2 (9.2.0.1.0) for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, Linux Intel, and Sun Solaris -
    http://download.oracle.com/docs/html/A96167_01/toc.htm

  • Can you clone Remote System key mappings?

    We have 2 Remote Systems set up for our MDM repository with key mappings for 60 tables. I now need to add an additional Remote System which is similar to one of the existing ones, but with a few different values. Is there any way I can clone the existing one or do I have to go through all 60 tables one by one, export the info, edit it to show the new Remote System name and re-import it? I have searched the sources but can't find anything on this precise topic.
    Thanks for any help you can give.
    Peter Croft

    Peter,
    No you cannot.
    Prepare a source having Just two columns ex., new Remote Keys of the system and an common identifier field in the table which you are planning to import with the data. Import it and get it to the data manager as records with just two fields(Remote Key and Common identifier). If you have the import maps already stored for the tables when you have done for the previous imports for the other two remote systems, use them and  automate the importing process for this particular remote system (via port configuration in console and Data manager) for the remaining fields of the table.

  • Is there a way to find out details about, who approved the RMA on system using front end or back end?

    Is there a way to find out details about, who approved the RMA on system using front end or back end?

    But is there a way (simple or not-so-simple) to find
    out EVERY SINGLE FILE that's referenced on a
    timeline? (I have lots of stuff imported into the
    project that I know isn't used on any timeline, but
    I'm afraid of moving or deleting things for fear of
    never finding it again.)
    I'd love to get some sort of "printout" (a list or
    something) of every single file.
    There is, go to browser and cntrl click on any one of the columns,
    and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
    Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
    If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
    From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
    Hope this helps and that I've read you properly,
    Peace
    P-Book 1.5, 17" 2gsRAM   Mac OS X (10.4.4)   FCStudio

  • What program should i use to archive my photos ?

    what program should i use to archive my photos ? i have tried aperture and the mage browsing program that comes with canon, but i just cant find the right program to be fast and efficent ! any suggestions ?

    " work for a news paper so i have a large amount of photos coming and going in my system, so i need a program that is faster and more efficient that aperture"
    I believe you are looking for a lightweight image browser/viewer that supports basic editing. I highly recommend Lyn and believe it is the exact program for your purposes. It is $20, but you are offered a free 30$ trial.
    http://www.lynapp.com
    And for a review:
    The Best Photo Management App for Mac OS X - Lifehacker

  • Does Time machine clone your system or back up your data files?

    I use superduper to clone my mac and its great. I got time capsule this morning and just want to know is it just your user files time machine backs up or does it clone your system?

    Hi there, I apologize for contacting you this way about your iphone for sale on eBay, its just i dont have an ebay account. Im from celbridge myself and im wondering if i could purchase the phone for the current price. My own iphone broke and need one asap. My number is 086 326 0110. Thank you. I look forward to hearing from you.
    Emma Connolly
    You can reply to me at [email protected]

  • System error when archiving a photo/file

    Hi Experts,
                      here we are using EP 7, and MAXDB 7 as backend and SAP content server AIX 5.3, apache 1.3,  when we are checking in SAP content server srkp09, we tested all 3 possibilities like single test, multiple test, and runtime test all the tests are successful, as part of portal side for a employees chnage own data we are trying to attach a photo ->Review and save -> we getting message attachment save to Database. !System error when archiving a photo. please advice how to rectify this problem ? is this is part of content server issue or portal issue.
    waiting for your quick help on this
    Thanks & Regards
    VenkataSurya

    Hi,
    Thanks for ur reply. But I have already gone through the steps. I can see the picture from R3 and store it there. But the problem is in ESS (portal). I can't store it from ESS as the address it going to store is <R3 hostname>:8000/fp/bc/contentserver........The actual should be <R3 hostname>:8001/fp/bc/contentserver........
    Plz suggest me where from it take the value 8001 in portal for employee pic. For all other T-iview  working fine. Telnet to 8000 is not possible, but 8001 is ok.
    Thanks,
    Sekhar

  • Can I install clone of system on same HD as Time Machine for a repair boot drive?

    Can I install clone of system on same HD as Time Machine so I can use the external as a second boot?
    I have an external connected to new iMac and installed Time Machine on it. I then realized that I cannot boot from TM so can I clone my system onto the same HD as the TM is on? For purpose of rebooting so I can use Disk Warrior or other diagnostics?
    Thanks.
    Jeff

    I did try that but the only options I was ofered were:
    Restore from Time Machine Backup
    Reinstall OS X
    Get Help Online
    Disk Utility
    I didn't want any of those options. I just wanted to boot from the external.
    You used recovery option - that is not what you need for this. Follow lowluster's suggestion to create another partition on your external drive, then format it using Disk Utility if necessary (in your applications folder). After that, use CarbonCopyCloner or SuperDuper to create a bootable clone on the external while booted from the internal.
    Didn't know TM was to be installed on internal boot. Thanks.
    Isn't there an advantage to having it on an external as well?
    Time Machine is an application program and installed on your internal by default. You activate it from there and it works on its own to create backups on an external drive. It backs up everything.

  • Can a time machine backup also be used for archive storage?

    Can the same time machine backup drive also be used for archive storage from another Macbook?

    The way TimeMachine works you can guarantee that anything on your computer now will be backed up and archival copies kept. But there are two caveats. First, TimeMachine trims backups. For 24 hours they are hourly (approximately). Then the most current will be trimmed and a week worth of daily backups will be kept. Then the week will be trimmed to the most current version and the weekly backups will be kept until the drive is too full. At that point the oldest weekly update(s) will be erased to make room for the next hourly backup. When trimming occurs, files that were backed up but are no longer on your computer will be trimmed. This is the second caveat.
    Since this trimming is automatic rather than under your control TimeMachine isn't a good archival backup system. Two programs that I can recommend that do have true archival ability are CarbonCopyCloner and ChronoSync. Both allow you to decide what gets archived and how many archival periods to allow.

  • Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using

    Hi Experts,
                 I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
               I'll get all the required data with field in an excel file.
                 Does any standard transaction exist for it ? Or how to go ahead with it ?
    Thanks and regards,
    Jyoti Shankar

    Hi
    If you are checking for CREATE option then Sales Doc Type
    For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
    Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
    That will show the MANDATORY parameters...
    Reward if helpful....
    Message was edited by:
            Enter the Dragon

  • How to implement SSO to non-SAP systems using SAP logon ticket?

    Hello,
    We would like to implement Single Sign On between our SAP Netweaver system and a Siebel which is a non-SAP system using SAP logon tickets.
    Can anyone please give me some leads on this, in particular:
    1. Is there a JAVA API or an SAP plug-in that can be implemented on the Siebel machine to extract the SAP logon ticket?
    2. As the other machine might seat on a complete different domain, is it possible to implement SAP logon ticket without using cookies (perhaps through the HTTP header?
    3. In case you think using SAP logon tickets is not the best solution here I would be happy to hear any other suggestions you might have.
    Roy

    Hi,
    I'm currently using SAML as well. Unfortunately the SAP J2EE cannot work as authority (identity provider) but what you can do is using an open implementation of SAML such as opensso which is an open version of SUNs Java System access manager.
    There are a couple of other projects such as opensaml, apache's wss4j or shibboleth that might be interesting in this context.
    I just installed opensso and got it working with SAP J2EE 7.0 using SAPs JAAS SAMLLoginModule to authenticate users within SAP J2EE.
    In this scenario opensso serves as identity provider just as you need! There are a couple of Policy agents available on SUNs Download site you can use with Apache, Tomcat, JBOSS, WebSphere, Bea Web Logic etc. in order to authenticate! Otherwise you just directly authenticate against opensso. When installing opensso you can configure the type of user store you want  to use! By default it uses LDAP but you can also use different types of user store using JDBC or other mechanisms. Since you have a Directory Service you could easily connect it to your existing directory.
    There is also a way to map user ids directly in opensso by adding a uid mapping class. I created some documentation with lots of screenshots about using opensso with SAP J2EE. You can easily use opensso with any other system that supports SAML. In the case of SAP the usage is currently limited to SAML versions 1.0 and 1.1. Version 2.0 is not yet supported but should be in one of the following versions.
    Here are some links you might want to check:
    OpenSAML: https://spaces.internet2.edu/display/OpenSAML/Home
    wss4j: http://ws.apache.org/wss4j/
    shibboleth: http://shibboleth.internet2.edu/
    opensso: https://opensso.dev.java.net/
    On SDN you will find a documentation on how to connect SUN Java System Access Manager to SAP J2EE (see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/906d9fc6-31b9-2910-1385-90edad7d7570). As I said opensso is based on the SUN Access Manager code and looks quite the same. So you can adapt this documentation in order to configure opensso or you can just ask me for the documentation.
    Hope this is helpful...
    Let me know if you need further assistance on this topic
    Cheers

  • When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

    When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
    All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
    I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
    Anyone know how I can do this? Thanks.

    Anyone?

  • HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
    Hope this helps.

Maybe you are looking for