Clone and heal tool
when I use the heal and clone tool I get a small image of a hand rather than a circle and the white marking doesn't seem to come out.
what does the hand mean?
john
The hand cursor means you are moving the source or the destination of an existing clone area. Pressing the letter H on the keyboard will hide and show the circles, and it you still don't see it after pressing H, it's possible the radius is too high.
Clicking "New" in the panel of the tool will start a new source and deselect the current one.
Clone and heal locations are marked with "pins" which can also be shown and hidden via the selection in the lower toolbar "Show Pins:" which can be set to "Always," "Never," or "Auto." The Auto setting shows the pins only when your cursor is over the image.
Similar Messages
-
Shift + command + f very slow with cs4 clone and healing tool?
using cs4-- i use the shift + command + f a lot to fade in or out the clone tool and healing brush.
however in cs4 the preview is very slow-- even though i have 8gb of ram!
the same process on the same file in cs3 is rapid-- even with only 2gb of ram-- so i assume this is a cs4 problem?
any solutions appreciated.Do you mean photoshop elements 7 and not premiere elements?
The fix posted above only applies to linux os systems, which is
different from mac and windows.
On windows vista Alt+left click is to set the clone source.
Try the following steps one at a time.
1. reset the clone stamp tool by clicking triangle on the far left of the
tool options bar and select reset tool.
2. Go to Edit>Preset Manager and click Done in the dialog that appears.
3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
at the same time you start elements 7. In the dialog that appears, click yes.
Hope this helps.
MTSTUNER -
I don't seem to have an align/unalign check box option anymore for tools like the clone and healing brush. PS CC14 Anyone know how to get it back?
Sounds like you have the Narrow Options Bar enabled
Photoshop>Preferences>Interface -
Clone and Healing Brush making blobs
When using the Clone and Healing Brush tools, everything will work as expected, and then blobs appear on other parts of the picture. I have noticed that when the Clone puts these blobs on, the + did not appear. Then I have to use the Undo button and try it again.
Hi,
Can you please be more specific about the steps, so that i can understand the issue clearly. Picture would help too.
Thanks. -
When I use the cloning and healing tool it used to show a stamp indicating where it was replacing from. It suddenly stopped working. I can still remove spots but cannot move it around to see where I could use alternate space to clone or heal.
The source should show on both Heal and Clone. Hit the H key to turn them off and on or pick one of the options in the Toolbar.
-
Copy and Paste clone and healing brush?
Is it possible to copy clone stamp tool and healing brush effects from one image to another?
I.e. I edit an image in Lightroom, then work on it in Photoshop CS often using clone and healing brush tool. However, if I then change the original in Lightroom, as I often seem to do, I have to re-do all my work in Photoshop. Is there a way I can copy my Photoshop work from the old to the new image?I'm not familiar with CS2 and don't even know whether it has an Options Bar. However, look for Window > Options to see if there is one that just needs enabled.
Here's what it looks like for Clone Stamp Tool in CS6. -
I am having problems with clone and heal. No matter what I do nothing changes in the image. Has anyone had this problem?
Do you have your Opacity Control set to a very low value?
-
Keyboard failure while using clone or healing tool
Hello there!
I've been having the annoying problem of my keyboard suddenly not working when i'm using the clone or healing tools. The failure is accompanied by a strange "ratchet"-like noise. Anybody know what's up?Hmmm, I guess It could kind of sound like broken glass.
Here's my hardware specs:
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03
SMC Version (system): 1.27f2
Serial Number (system): W88339RUYJX
Hardware UUID: 7F0D0FD8-0A18-5BFD-AF6A-22BEE0500E77
Sudden Motion Sensor:
State: Enabled
Thanks for your help! -
Clone, spot healing tool, content aware will not work on 11 or 12
The following tools will not work on PSE 11 or 12: clone, spot healing, content aware. Using 3 yr old iMac with latest OS. Same problem on Mac Book. I must be something wrong.
I'm not sure what was going on. I eneded up discarding the photo I was working on and open up another one and everything worked. I guess just a little hitch in it's gitty-up!
Thanks for your comments. -
Photoshop cc 2014 suddenly trouble with cloning and healing tool
I just updated photoshop cc 2014. I use a wacom tablet. Suddenly, when I use the healing brush or cloning brush. The brush control panel pops up and the tool simply doesn't work. After repeated attempts, I do succeed in getting this to work. Sure slows me down though.
Sorry for the lack of the report it was my first time reporting an error for software... Never had an issue before.
I haven't experienced the crash via text tool since I posted the question, but the Photoshop is still constantly crashing at startup, but every time I try to enter the report I get the error: Please try again later.m5 -
hi,
can anyone help me? i currently have the trial version of Ps CC and everytime i try to use the clone or wand tools my screen goes black and i cant see what im working on but when i stop trying to clone or select the screen reverts back to normal and i can see my image againHi thanks for the advice but I'm not sure if it is a card problem, I'm able to use the tools if I run Ps as an admin but if I just open the program normally it doesn't work, I've checked the settings under preferences,performance and they seem fine, I've checked the clone stamp box to see if "display overlay" was ticked but it wasn't, the tools are working now but only if I run as an administrator
-
CS5 - Clone and Healing stop working
Hi,
I'm using PS CS5, Windows XP Home, fast CPU, 4GB RAM.
I was working on a file today -- D3 NEF opened from LR3 into CS5 -- and created about a dozen layers, some adjustment layers and other empty layers for healing and cloning (using Sample All Layers with only background layer and empty cloning layer on). After quite a bit of work, the Clone Stamp Tool and the Spot Healing Brush Tool simply stopped working. I was puzzled and unable to get them to work until I thought to close the file and reopen it. Then they worked again. This happened a couple of times. To test, I flattened my file, just to see if the tools would work then, but no luck.
Anyone know why this is happening? Am I doing something wrong here?
Thank you.
JohnIs is possible you've made a selection, hidden the edges, and are now trying to clone into a place that's not in the selection? I've had that happen a few times.
-Noel -
Cannot use clone and heal brushes
I've followed the video of how to use these brushes, but whenever I select either of them, I either get a "hand" or a small cross, neither of which allow for selecting the areas of be healed/cloned. What am I doing wrong?
As you increase the brush size you should see a cross in the middle. That is the sampling point, e.g. the area you click on that you wish to heal or clone out. As soon as you click or drag the hand appears with the suggested area to be copied (usually a nearby sample with a similar color) You can drag the with the hand, if you prefer to copy from another part of the image and then click done.
-
Photoshop CS4 64 bit - Clone Tool does not work (and other tools)
Hello.
I have been using Photoshop for many years going back to v5. I had used Design Prem Suite CS4 for the past year on an XP machine. All worked fine. I recently moved to WIndows 7 (64 bit) to get the add memory usage. CS4 installs both 64 and 32 bit versions on Windows 7 64 bit. So far all good. Any help would be GREATLY APPRECIATED. I am at a dead end and really have no confidence in getting Adobe's help.
My tools are working erratically, especially the cloning and healing tools. I can't even use Photoshop in its current state and this has been going on now for weeks, no help from Adobe on my lates support ticket post.
I canonly say that the clong tools is all over the place including but not limited to:
* When I sample and then click to stamp, lines shoot across across the image as it I clone a line not a single sample area. These stamps can be the length of the enite image.
* when I sample, then click to stamp, some the stamps occurs on some other part of the image.
* when I sample and the click to stamp, nothing happens. I have to click several times.
* when I sample and then click to stampl, the prior location I stamped has the clone applied
There are more, but this is to just give an example.
Notes:
* I have trashed preferences at least 20 times and the problem immediately reappears
* The problem happens in both the 32 bit and 64 bit version of PS running in Windows 7 65 bit
* The problem occurs with OpenGL tuned on and off
* I have installed the latest PC patch 11.0.1
* I have updated my latest NVidia drives. They are current.
* I uninstalled Photoshop (kept the rest of Suite) and that did not work, and the same problem reappeared. I am not uninstalling the complete suite but the reinstall has error (that is a separate issue)
* I have triple monitors running off 2 GeForce 9800 GT cards. These worked flawlessly before upgrading to the Windows 7 64 bit configuration. When I upgrades, I replaced the processor, motherbaord and moved to 12 GB ram. The graphic cards are the same.
Other tool issues:
* I have similar problems with the healing brush
* sometomes the text tool acts strange. I will click to enter text and a large area opens to enter text instead of just the cursor positioned ready for text. Then other times it works normally.
* the move tools sometimesacts strange. For example, if I try to move some test, the text jumps and moves of the image and I have to find it to drag it back on the image.
Thanks in advanceAll I can say is... Boy am I glad I have an ATI card that just works (and that's including Photoshop CS4/CS5 32/64 bit)!
One thing I'm not sure was mentioned above... Try changing your Advanced OpenGL preferences to "Basic" or even turning off OpenGL to see if it affects the issue. Also try disabling the Show Overlay function in the CLONE SOURCE palette.
Best of luck getting to the bottom of these problems, guys. If they run on too long, consider switching brands.
-Noel -
Elements 9 Cloning and Healing problems
My Cloning and Healing Tool doesn't work correctly. Both very often puts what I am cloning or healing (with content aware) somewhere else on the photo other than where I want it. Sometimes it put a large streak accross the photo as I make a small correction somewhere else. It use to work fine. System: Win 7, 64bit, large memory, large Hard Drive, new computer, no other software has been installed... Thanks so much
Thanks Barbara. This did make my problem a lot better, but it still misses up from time to time as discribed, so I just hit rest tool in top left corner and then I'm good to go for awhile. I can live with that, unless you have another idea that can help. Thanks so much.
Maybe you are looking for
-
BIR Form 2307 set up for the Philippines (std formname IDWTCERT_PH_2307)
Hi Gurus, I would just like to ask help in setting up this standard form in fico. It is a sap standard smartform with the name IDWTCERT_PH_2307. The form can be configured in tcode S_P00_07000134 by supplying the form name to be printed but an error
-
Invalid column name - fixed by inserting a carriage return - Why?
I'm writing some JSP pages and am executing a statement that retrieves values from three tables. When executing the statement I receive the error java.sql.SQLException: Invalid column name I just want to state here that ALL the column names are defin
-
Question: I bought a 5 yr old Mac G5 OSx 10.4.11, 2 GHz intel Core 2 Duo processor, 1GB 667 MHz DDR1 SDRAM memory. It works fine but I can't get Thunderbird, Flash Player or Adobe reader to install -- it shows up on desktop as download but not App
-
Hello Today, I got iOS5 and set up my iCloud setting. So when I edit contacts on my mac, (user pic, number etc..) it automaticaly sync with iCloud. But when I sync contacts on 4.3.X, the caller ID's picture size is small - thumbnail size and I like i
-
Hi there, I've been encountering a problem with Safari all day long since my last security update (I choose to shut it down rather than restarting it). This morning (when I turned my Mac on), every time I try to open Safari it "quite unexpectedly". I