Clone and Healing Brush making blobs

When using the Clone and Healing Brush tools, everything will work as expected, and then blobs appear on other parts of the picture.  I have noticed that when the Clone puts these blobs on, the + did not appear.  Then I have to use the Undo button and try it again.

Hi,
Can you please be more specific about the steps, so that i can understand the issue clearly. Picture would help too.
Thanks.

Similar Messages

  • Copy and Paste clone and healing brush?

    Is it possible to copy clone stamp tool and healing brush effects from one image to another?
    I.e. I edit an image in Lightroom, then work on it in Photoshop CS often using clone and healing brush tool. However, if I then change the original in Lightroom, as I often seem to do, I have to re-do all my work in Photoshop. Is there a way I can copy my Photoshop work from the old to the new image?

    I'm not familiar with CS2 and don't even know whether it has an Options Bar. However, look for Window > Options to see if there is one that just needs enabled.
    Here's what it looks like for Clone Stamp Tool in CS6.

  • I don't seem to have an align/unalign check box option anymore for tools like the clone and healing brush. PS CC14 on a Mac. Anyone know how to get it back?

    I don't seem to have an align/unalign check box option anymore for tools like the clone and healing brush. PS CC14 Anyone know how to get it back?

    Sounds like you have the Narrow Options Bar enabled
    Photoshop>Preferences>Interface

  • Cannot use clone and heal brushes

    I've followed the video of how to use these brushes, but whenever I select either of them, I either get a "hand" or a small cross, neither of which allow for selecting the areas of be healed/cloned. What am I doing wrong?

    As you increase the brush size you should see a cross in the middle. That is the sampling point, e.g. the area you click on that you wish to heal or clone out. As soon as you click or drag the hand appears with the suggested area to be copied (usually a nearby sample with a similar color) You can drag the with the hand, if you prefer to copy from another part of the image and then click done.

  • PS CS5 Extended on Windows -  When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush.  W

    PS CS5 Extended on Windows
    When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush.  This just started tonight.  What's causing this weird behaviour?

    What are the settings in Window > Clone Source?

  • Clone Stamp & Healing Brush and alignment

    I have PSE9. I am having excellent success in removing collars from the dog pictures I am working on when using the Clone Stamp and Healing Brush tools in combination. The book I am learning from says if I want to select pixels from a single source to deselect the align option. However whether I have the align option selected or not, I am getting the corresponding crosshair sampling pixels as the tools are brushed on the image. I know I can do even better if I can maintain a single sampling source. How do I select and maintain a single sampling source for these two tools? Thanks, Jim.

    Thank you for your response, but forgive me for asking for clarity. I will be removing alot of dog collars. The collar is red and is surrounded by white and black fur. Just to make sure I understand, as I use the two tools, even with the Aligned option deselected, I will need to keep identifying source pixels multiple times as I brush out the collar. There is absolutely no way ((I tried the single click) to select one source and brush wherever I like on the photo and remove the replace the pixels with the one source. Thank you for your patience, Jim.

  • Clone Stamp and Healing brush problem, please help!

    Hi there, I'm new to the forum but I have been using Adobe creative suite for quite some time now.  As the thread title describes, I'm having an issue with my photoshop clone stamp and healing brush tool that I can't seem to fix on my own. I searched the internet all day, scrolling over many other posts but I can't seem to find anyone else who is having similar issues like I am having here.
    This is kinda hard to explain but the issue I am having, is that when I go to use either my clone stamp or healing brush tool, the layer I am working on whether it is a flattened background or normal editable layer, get shifted as soon as I press the option key to make a selection and then when I go to move to the area to use these tools it acts like I've duplicated the entire layer and drags it around the screen, even though no such copy and paste has been made.  All of my other tools are working normally and I wasn't having this issue last time I worked on anything in photoshop.
    I am running:
    a Mac OSX 10.5.8
    CS4 extended version 11.0.2
    Any and all help is greatly appreciated.

    Your probably seeing the clone source overlay.
    Go to Window>Clone Source and either uncheck:
    Show Overlay for no overlay or check clipped to show the overlay
    clipped to the size of the brush.
    There is also a photoshop  macintosh forum for future reference
    (you posted in the photoshop elements forum)
    http://forums.adobe.com/community/photoshop/photoshop_macintosh
    MTSTUNER

  • Clone Stamp Tool and Healing Brush not working - why?

    As pointed out in the thread subject line, both the clone stamp tool and healing brush are not working for me in Photo Elements 7.
    When I am attempting to use it, I get the message: "Could not use clone stamp tool because the area to clone has not been defined".   Well, this is not the case since I did define it with command Alt + left mouse click.
    Background:
    Photo Elements 7 is installed in Windows XP Professional SP3. The latter runs as a virtual O/S with Sun VirtualBox on host SuSE Linux 11.1 (Gnome).
    I have run out of ideas as to what the problem could be, so I am requesting assistance from the forum community. Thank you very kindly in advance for replies.

    Do you mean photoshop elements 7 and not premiere elements?
    The fix posted above only applies to linux os systems, which is
    different from mac and windows.
    On windows vista Alt+left click is to set the clone source.
    Try the following steps one at a time.
    1. reset the clone stamp tool by clicking triangle on the far left of the
       tool options bar and select reset tool.
    2. Go to Edit>Preset Manager and click Done in the dialog that appears.
    3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
        at the same time you start elements 7. In the dialog that appears, click yes.
    Hope this helps.
    MTSTUNER

  • Help!!!! clone stamp and healing brush tool stopped working suddenly

    Help!!!! clone stamp and healing brush tool stopped working suddenly

    What are the Tools’ Blend Mode, Opacity and Flow (see Options Bar)?
    Could you please post a screenshot with the pertinent Panels visible?
    Have you tried resetting the Tools?
    Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • Will upscaling or using clone stamp/healing brush to upsize give better resolution?

    I'm designing a 5.25" square CD cover using a rectangular image and the resolution needs to be min. 300ppi to print .  The artist sent me the art image (painting) from her camera as a jpeg and it goes to photoshop as a large (approx 20" X 24") file at 72 ppi.  To change the ppi to 300 without resampling (I've been told this is best), the image becomes too narrow (4 1/2") and too high (5.9"). 
    I don't want to crop because I don't want to lose content.  I want the image to completely cover the CD cover  And I want to keep the same proportions for certain parts of the image.  So I believe my two best options are as follows:
    1.  Bring the image to 300ppi with the measurements above, protect certain parts of the image on an alpha channel, content aware scale the rest of the image wider to make it square and then resize down a bit for the CD cover or
    2.  Bring the image to 300ppi and then use the clone stamp and healing brush tool or content aware fill (doesn't work so well on this image) to duplicate and extend the sides of the image to widen and square it and then resize down a bit for the CD cover. 
    Does anyone know which of these options will give the best resolution?  Is upscaling more likely to cause pixelization than the other option?  Is there a better way?  Should I do options 1 and 2 to the large 72 resolution image instead of bringing it to 300ppi first and then upscale or clone stamp--would that give better results?
    Thanks, any help is greatly appreciated!

    You've said that you don't want to crop, and you want to cover the entire CD cover. That leaves you with two choices. Extend the short side(s) via cloning, content aware fill, etc. or stretch the image in one direction, either with the standard free-transform or with content aware transform. See what looks best. Your resolution will be fine. You can res up if you need to. The amount you're short will not matter here. Leave room for bleed - usually 1/8".

  • Shift + command + f   very slow with cs4 clone and healing tool?

    using cs4-- i use the shift + command + f a lot to fade in or out the clone tool and healing brush.
    however in cs4 the preview is very slow-- even though i have 8gb of ram!
    the same process on the same file in cs3 is rapid-- even with only 2gb of ram-- so i assume this is a cs4 problem?
    any solutions appreciated.

    Do you mean photoshop elements 7 and not premiere elements?
    The fix posted above only applies to linux os systems, which is
    different from mac and windows.
    On windows vista Alt+left click is to set the clone source.
    Try the following steps one at a time.
    1. reset the clone stamp tool by clicking triangle on the far left of the
       tool options bar and select reset tool.
    2. Go to Edit>Preset Manager and click Done in the dialog that appears.
    3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
        at the same time you start elements 7. In the dialog that appears, click yes.
    Hope this helps.
    MTSTUNER

  • Clone and heal tool

    when I use the heal and clone tool I get a small image of a hand rather than a circle and the white marking doesn't seem to come out.
    what does the hand mean?
    john

    The hand cursor means you are moving the source or the destination of an existing clone area. Pressing the letter H on the keyboard will hide and show the circles, and it you still don't see it after pressing H, it's possible the radius is too high.
    Clicking "New" in the panel of the tool will start a new source and deselect the current one.
    Clone and heal locations are marked with "pins" which can also be shown and hidden via the selection in the lower toolbar "Show Pins:" which can be set to "Always," "Never," or "Auto." The Auto setting shows the pins only when your cursor is over the image.

  • I am having problems with clone and heal.  No matter what I do nothing changes in the image.  Has anyone had this problem?

    I am having problems with clone and heal.  No matter what I do nothing changes in the image.  Has anyone had this problem?

    Do you have your Opacity Control set to a very low value?

  • I upgraded Elements but now it does not recognize Option key for Clone Stamp, Healing Brush etc.

    I upgraded Elements but now it does not recognize Option key for Clone Stamp, Healing Brush etc.

    Quit the editor, then relaunch it while holding down command+shift+option. Keep holding down the keys till you see a window asking if you want to delete the settings file. You do.
    It wouldn't hurt to repair permissions, either.

  • Clone stamp and healing brush issue

    having problems with photoshop 5.5... new issue for me, as there weren't any issues yesterday. both the 'healing brush tool' and the 'clone stamp tool' are giving problems. when i press the alt key to collect an area to sample, on my screen it looks as tho the hand tool engages, and there is a second (copy looking) image moving around my screen over the original. i've already tried the 'tool reset all' function and rebooted... still haveing the same issue. anybody have some advise? help a guy?

    thanks soooooo much... not sure how i managed to select the 'show overlay' box... but i had. free at last!

Maybe you are looking for