Clone and Pattern Stamps

I have purchased Photoshop Elements 10 after my old computer crashed with Photoshop Business 1.0 that worked great for many years.     Now I can't get the Clone Stamp or Pattern Stamp tools to work or I don't understand how they work.  I can't make heads or tails out of any of the help areas.   Actually I can't figure out how to do about 90 percent of the things I used to do with the old program.   This is another case of Newer is NOT better!     I'm finding it's impossible to complete the photo jobs that were simple before.  The "layers" issue is killing me.  Can the layers be shut off?   Right now I'll be a little happier if someone can help me with the Clone Stamp and Pattern Stamp.  No matter how many times I try to click with the Alt, I just get a patch of light blue and I have no idea where it came from....   . 

For the clone stamp tool you should be able to alt click on the area for the source and paint on another area to copy the source to that area.
In reality if your old program is anything like older versions of photoshop then the options for the clone stamp might be a little different.
You should have aligned checked and you might want to uncheck Show Overlay.
This is a pretty good video (uses pse 9, but pse 10 is the same):
http://www.alibony.com/video/video-lesson57.htm
For the pattern stamp you don't have to define a pattern each time you use the tool if you can find a suitable pattern in the presets.
If you do define a new pattern, then you can save it as a preset if you think you'll need it later.
The directions for the clone stamp in the pse 10 help manual are not very good, but the ones for the pattern stamp tool are not bad:
http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f71abaa0b12e28aec742- 7fdc.html
Some videos covering the pattern stamp tool:
http://www.youtube.com/watch?v=95RkHw8ryLA
Some layers videos:
http://www.youtube.com/watch?v=6lWgnl4IcGg
I'd highly recommend a book such as Photoshop Elements 10: The Missing Manual.
Message was edited by: R_Kelly

Similar Messages

  • Eraser Tool and Pattern Stamp Tools Not Working Properly

    I recently downloaded Photoshop CC on my Mac.  I've been using Photoshop for years and don't recall experiencing these problems.
    When using the eraser tool in brush mode, I select the appropriate preset and opacity, flow etc.
    Let's say I have the brush size set at 70px and hardness at 100%.  I erase, but the area erased is only 2/3rds of the actual size of the brush.
    The same is true for the pattern stamp.  Only 2/3rds of the pattern stamp is working.
    I've tried resetting to the tools and have search all over for similar problems in the forums but cannot find a solution.
    Any help would be greatly appreciated.
    Thanks in advance.

    Not being a Mac user I don't recall the specifics, but there is I believe a system setting for cursor size.  You may have it set larger than it should be to work with Photoshop.
    -Noel

  • Clone Stamp replaced by Pattern Stamp?

    I am using the student version of CS4 for Mac.
    My Clone Stamp is no longer there and is replaced by the pattern stamp instead.  I feel like I should be able to turn it back into the clone stamp tool, but have no idea how it even happend.  Please help!

    Click down and hold on the pattern stamp tool to reveal the second tool, or clone stamp. Alternatively, press shift-s to switch the tool.

  • I am using the pattern stamp tool. when i select my pattern it adds a hatching to teh source pattern and copies that hatching to the destination image

    I am using the pattern stamp tool. when i select my pattern it adds a hatching to the source pattern and copies that hatching to the destination image

    Please post screenshots to illustrate what you are talking about.

  • Pattern stamp tool scaling!

    Hi there!
    Here is a feature I have been missing in photoshop. I noticed you are now able to scale your clone source in photoshop CS4, which is excellent. I would love to be able to do the same thing for the pattern stamp tool!
    I use the pattern stamp tool a lot for texturing, since it is quite handy to have a bunch of base textures readily available like that. I work in the games/3D industry and use photoshop a lot for texturing. Currently you can only stamp the pattern at a fixed size, so I have had to create differently scaled versions of each texture I use for the stamp tool. Having the ability to to scale the pattern would be awesome.
    Best regards
    Markus Schille

    Yeah, its helpful. A nice tip anyways. But it would be even better with the pattern stamp tool, because then you could mix different patterns, so its more like painting freestyle. Also in some cases I like using the non aligned version, to get a more randomized result, otherwise you get ugly repeating patterns.
    An additional feature I would like is rotation /angle. If you ever have tried Maxxons bodypaint 3D you will know what I'm talking about.
    Message was edited by: Markus_Sch

  • Can you remove a date and time stamp off a photo that has already been taken?

    Can you remove a date and time stamp off a photo that has already been taken?

    only with Photoshop or similar software that offer some clone/heal feature.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • Copy and Paste clone and healing brush?

    Is it possible to copy clone stamp tool and healing brush effects from one image to another?
    I.e. I edit an image in Lightroom, then work on it in Photoshop CS often using clone and healing brush tool. However, if I then change the original in Lightroom, as I often seem to do, I have to re-do all my work in Photoshop. Is there a way I can copy my Photoshop work from the old to the new image?

    I'm not familiar with CS2 and don't even know whether it has an Options Bar. However, look for Window > Options to see if there is one that just needs enabled.
    Here's what it looks like for Clone Stamp Tool in CS6.

  • How to get the most current file based on date and time stamp using SSIS?

    Hello,
    Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
    Thanks
    thx regards dinesh vv

    hi simon
    i excuted this script it is giving error..
       Microsoft SQL Server Integration Services Script Task
       Write scripts using Microsoft Visual C# 2008.
       The ScriptMain is the entry point class of the script.
    using System;
    using System.Data;
    using Microsoft.SqlServer.Dts.Runtime;
    using System.Windows.Forms;
    namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
        [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
        public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
            #region VSTA generated code
            enum ScriptResults
                Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
                Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
            #endregion
            The execution engine calls this method when the task executes.
            To access the object model, use the Dts property. Connections, variables, events,
            and logging features are available as members of the Dts property as shown in the following examples.
            To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
            To post a log entry, call Dts.Log("This is my log text", 999, null);
            To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
            To use the connections collection use something like the following:
            ConnectionManager cm = Dts.Connections.Add("OLEDB");
            cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
            Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
            To open Help, press F1.
            public void Main()
                string file = Dts.Variables["User::FolderName"].Value.ToString();
                string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
                System.IO.FileInfo finf;
                DateTime currentDate = new DateTime();
                string lastFile = string.Empty;
                foreach (string f in files)
                    finf = new System.IO.FileInfo(f);
                    if (finf.CreationTime >= currentDate)
                        currentDate = finf.CreationTime;
                        lastFile = f;
                Dts.Variables["User::LastFile"].Value = lastFile;
                Dts.TaskResult = (int)ScriptResults.Success;
    thx regards dinesh vv

  • How do you edit out the date and time stamp from a photo

    How do you edit out the date and time stamp from a photo

    You can blur it out with retouch
    The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
    Regards
    Léonie

  • Adding redirect path and  pattern in Lion server for configuring software update server

    Adding redirect path and  pattern in Lion server for configuring software update server.Any changes

    Ok, after days of browsing on the forum I found the following hint on another discussion related to AFP access:
    "This may be a service ACL issue.
    It turns out one of the latest Apple updates turned on Service ACL's which caused AFP connections to be  blocked. Once I fixed the Service ACL in Server Admin... all connections and Single Sign On worked."
    Well, after allowing access to all services to all users with Server Admin, we were finally able to log in the server with our admin account...
    So, there must have been an update that turned on ACL's which caused even our local access, probably for OD/Kerberos, on the server to be restricted.

  • How do you date and time stamp pictures and videos using a EOS Rebel T3?

    I am needing to utilize date and time stamping on videos and photos in my work.  The pictures and videos must display time, a date, and reference number.  I have gone through the cd, owner's manuel and software manuel and I am unclear if I can perform this function. 

    While this is a relatively common feature on point & shoot cameras -- where the photo is thought of as a snapshot to document a memory in a person's life, among DSLR cameras it's not very common (I don't actually know of a DSLR that does this though I don't doubt that it may exist).  DSLR users are usually expecting a higher quality image -- so now the image is thought of more like art and less like a snapshot and the date/time in the corner distracts from the image.  Also they tend to be more advanced users who would be able to modify the image themselves so they have little need for such a feature.
    The camera does record the date & time... but it's in the EXIF data (information recorded into the image file but not displayed).  
    SO... there are programs that will just do this.  You'll need to do a search (I found several but have never tried one so I can't vouch for them).  I think there are Photoshop plug-ins that do this (assuming you have Photoshop). These programs allow you to define the info you want printed (including EXIF data such as date/time) and you get to pick the location, font, size, color, etc. and ultimately the location on the image where you'd like the info displayed.  They then add the info visibly onto the image for you and most support "batch" use (e.g. drop a whole folder of images on it and they'll do them all.)
    Tim Campbell
    5D II, 5D III, 60Da

  • How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    BKBK,
    Thank you for your response. That does adequately cover the
    client-originated sessions, but still leaves the ability I am
    looking for unavailable.
    It did serve to definitively answer my most pressing
    question, however, with this statement:
    Note: ColdFusion cannot create a session if an initiator
    application uses a SendGatewayMessage method to start an
    interaction with a client, such as an SMS user. In this case, the
    sending code must keep track (for example, in a database) of the
    messages it sends and their destinations. When a response event
    arrives, it can look up the origniatorID to determine whether it
    was in response to an outgoing message.
    I will play around with the Application scope to see if there
    might be a workable solution there.
    RLS

  • Help adding current Date and Time stamp to file name

    I need help with my script adding current Date and Time stamp to file name.
    This is my file name = myfile.htm
    I would like to save it as = myfile.htm 8/29/2007 11:41 AM
    This is my script:
    <script>
    function doSaveAs(){
         if (document.execCommand){
              document.execCommand('SaveAs','1','myfile.htm')
         else {
              alert("Save-feature available only in Internet Exlorer 5.x.")
    </script>
    <form>
    <input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
    </form>
    Thank you

    I agree, I guess I overlooked that!
    I would like to save it as = myfile 8/29/2007 11:41 AM .htm
    I need help with my script adding current Date and Time stamp to file name.
    This is my file name = myfile.htm
    I would like to save it as = myfile 8/29/2007 11:41 AM .htm
    This is my script:
    <script>
    function doSaveAs(){
    if (document.execCommand){
    document.execCommand('SaveAs','1','myfile.htm')
    else {
    alert("Save-feature available only in Internet Exlorer 5.x.")
    </script>
    <form>
    <input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
    </form>

  • DATE and TIME and PATH stamps

    I'm a relative newbie still having issues with getting date and time stamps on my printed documents. I use Preview, Pages, Numbers and also tend to print to PDF a lot, which I am opening in Preview.
    I have found an "Insert" ability in Pages but for some reason it appears to only give me the date that I inserted the Timestamp and despite thinking that I understood that this would update itself when I re-open the document it does not seem to be doing this.
    Can anyone help me figure out what I am doing wrong and/or what my options in Mac for putting the following on a document:
    A. DATE and TIME /printed/
    B. NAME of document with LOCATION (I assume this is software specific?!)
    Thanks for any (further) help with this.
    - Jon

    menu Insert > Date_time
    then apply what was described by Jerrold in his message above
    Helpful AnswerRe: DATE and TIME and PATH stamps
    22 nov. 2011 18:05 (in response to hotwheels 22)
    Or simply double-click the inserted date-time (CAUTION : I don't know if the double click apply with every system or if it's dedicated to Lion).
    As far as I know, the inserted date behaves the same in header, footer, text box or main text layer.
    Yvan KOENIG (VALLAURIS, France)  mardi 22 janvier 2011 20:25:12
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • DATE and TIME Stamps

    I'm a relative newbie still having issues with getting date and time stamps on my printed documents.
    I use Preview, Pages, Numbers and also tend to print to PDF a lot, which I am opening in Preview.
    I have found an "Insert" ability in Pages but for some reason it appears to only give me the date that I inserted the Timestamp.
    Can anyone help me figure out my options in Mac for putting the following on a document:
    A. DATE and TIME printed
    B. NAME of document with LOCATION (I assume this is software specific?!)
    Thanks for any help with this.
    - Jon

    Yes, ...and I was hoping to find a solution since I sometimes have the same problem!
    But I'm afraid there is none. For sure I didn't find any fxscript function returning Date&Time. At the moment the best solution I know is what you suggested, Ian: capture twice, once in FCE for editing and once in iMovie for reading Date and Time.
    I'd be glad to write and share a plugin displaying date and time if somebody is able to tell me what fxscript function (if any) should I use...
    Piero

Maybe you are looking for