Clone but with error

Hello,
I have tryied to clone a database but I encounter an error which I was not expected. :)
After I closed the database ( from OEM) an copyed the files I have tryied to open it. I got an error that TNSListener is not found. The only solution wj\hich I have found was to restart the service "OracleServiceTEST" ( TEST database).
Can you please tell me why do I got this error?
database: Oracle 9i
SO: Windows

I think you need to detail all the steps you are taking here.
From your description it looks like you copied only data files but did not create a new control file for the cloned database.
You may want to look into manuals for more detailed procedure as to how you would go about creating a duplicate database using rman or manually using cold copy of datafiles and creating controlfile for the copy and for windows create a new service (oradim)

Similar Messages

  • WAD error: done , but with errors on page!

    Hi,
    when i try to display query on web, it is displaying a partial report with almost no data on the page and right at the bottom  i could see the message
    "Done, but with errors on page"
    what can be done to remove this error?
    Thanks,
    Ravi

    hi Ravi,
    try to click the error message, see if it will pop up more detail message.
    as mentioned, seems you use some javascript in your web template,
    see the detail message and check your javascript code,
    it can be object not define etc, please note that it's case sensitive,
    so e.g if you use object/variable or call function, check it's exactly same.
    hope this helps.

  • Done, but with errors on page.?

    Hi there,
    I was wondering if someone can help me?.
    I built a site http://www.pawsofeskbank.co.uk/ i had problems with the "£", every time i used the £ it came up with "Ã" i replaced the "£" with "£" this worked great, but now when up open the site at the bottom of the browser it says "Done, but with errors on page.?". I open the details and it says "invalid Charter" line 80 and so on but i have no idea how i get ride of this???
    Can anyone point me in the right direction, Cheers

    Cheers mate,
    Much appreciated, its been driving me nuts for a week…is there any way I could spot that sort of thing if it happens again?
    Cheers

  • So I was updating my boyfriend's iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have ev

    So I was updating  iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have even tried updating in DFU mode and no luck. Anyone git any solutions

    Are you following these instructions?
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • I am trying to use apple configurator with ipads. I have been successful with all our ipads but 1. It will not allow me to add apps. The error I get is that it is refreshed but with errors e

    I am trying to use apple configurator with ipads. I have been successful with preparing and supervising all ipads but one. When preparing it in configurator, I receive an error that it is refreshed but with an error. Under supervise, I am not able to add apps. I have erased all content to start over but this does not work either

    Are you trying to restore a backup, or just sync some apps? Do you have profiles installed on the device?
    Have you plugged the ipad into iTunes, and did a fresh install? I'm assuming the device went through the prepare setup properly. You many have to unsupervise it first, then plug it into iTunes to wipe it completely.
    I'd then do each step seperately. Prepare it, then install 1 app, if that works, try another app, then maybe a profile.

  • BPC 7.0: Consolidation in financial application but with errors

    Hello
    Currently we consolidate with an FXConsol data package in a financial application type. We did not want to create a consolidation application type, as any eliminations are not necessary. But adding all company values up to a group value is essential.
    However, putting all numbers together with the FXConsol package is working, but nevertheless the log details show an error - no instruction retrieved from ELIM table.
    Is it possible to let FXConsol finish without showing an error in a financial application? Or is it better to use FXTrans with an additional formula?
    Thanks for your help. 
    Melanie

    Hi Melanie,
    There is some inconsistency which has come up during the entire process. If you can please let me know the exact steps you have followed,  that would be great.
    The main problem, I see, is with the argument list of the SPRUNCONSO. Check the parameters of SPRUNCONSO in the database and match it with the arguments using which you are invoking the stored procedure. There is some mismatch between these 2 places.
    Since the requirement, based on your previous post, was just to have another copy, I would suggest you to create copy of the specific function and rename it, instead of creating the copy of the entire .lgl file.
    1. In your script logic, change the statement RunConsolidation(parameters) to RunCon(parameters).
    2. In the file AAG_System_Library.lgl, copy from
    *SUB Runconsolidation(......
    *ENDSUB
    and paste it at the end of the same file.
    3. Change Runconsolidation to RunCon
    4. Make the desired changes in this function.
    So, this process will create a new function runcon and you can modify it as required. This function can be refered in your script file and this should work absolutely fine.
    Hope this helps.

  • MDT install completes but with errors

    I'm having an issue with a MDT 2012 image completing 100% successfully. Everything installs and I get into Windows, but when it finishes it fails with 8 errors.  See picture below:
    I'm confused about what's happening and why.  What I did was create a VM with everything in the image I want.  I then ran a Sysprep and Capture Task Sequence on the VM.  I basically followed this guys step-by-step procedure:
    http://bjtechnews.org/2013/08/29/mdt-2012-sysprep-and-capturing-basics-livestream-september-1st/
    The good thing is that the image does install, the computer joins the domain, and everything seems to be okay.  The bad thing is that I get those errors and I don't understand why.  I believe that, among other things, it's saying the sysprep
    couldn't be completed, but my question is what sysprep?
    Ugh, I'm so confused...
    Any help would be greatly appreciated.

    So here's where I'm stuck now. I know Audit Mode is what
    I want to use but I can’t get it working for me at all. I can get the system into Audit Mode so I can install stuff, uninstall stuff, set certain settings the way I want, etc., but I can’t seem to end Audit Mode.
    Here’s what I’ve done. I’ve run Sysprep and have chosen the Enter System Audit Mode option with Reboot being the
    other choice. I click OK and it eventually reboots and I’m in Audit Mode. Great. I’m able to do everything I want to do, but then the question is how do I end Audit Mode?
    One way I read to do this was to run Sysprep again and choose the option “Enter System Out-of-Box Experience”,
    select Generalize since I want to use this image on various different systems, and shutdown from the Shutdown Options.
    I tried that but got the same result – none of my settings were in place. The only other option I’ve seen for getting
    out of Audit Mode is to edit the registry.
    How do you do it? I’m completely lost on this one.

  • Error messages: "Done, but with errors on page" and "Error on page" on the Verizon log-in page.

    How do I remove/correct the page errors above? The error msgs only appear on the VZ web site log-in page.

    Those are typically from what I presume you're using is Internet Explorer not liking the way some of the code is formatted on the website. They can be ignored if you are not having issues with the site. Each browser will complain about something and call it an Error in some way or another. You have to have an extremely basic page to not have a complaint about an error, or one crafted for every web browser out there.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • "Done, but with errors on the page" message

    I get this error message in IE7 and 8 on my home page. It's caused by the embedded SWF in the banner, as when I delete the SWF I no longer get the message. IE7 says "Object doesn't support this action" and "Object doesn't support this property or method." Are there newer tags produced in newer versions of Flash (I'm using CS3) that I can replace these with?

    Do you have a link to a page that has this error?

  • FacesMessage with severity info but with error's icon

    Hi to all
    How can i show to users a message that have the severity info but the icon of an error?
    Thanks in advance

    I think you have to create one in your own and handle the validation in your backing been.
    You can make a popup containing a dialog and add an "TitileIconSource" to the dialog.

  • Camera RAW update with errors

    I am running CS6 on a Macbook Pro.  Photoshop cannot read camera raw files from my new Canon 6D.  I went through the update process and as expected I needed a newer version of ACR.  I completed the update process but with errors.  Camera Raw was not updated.  I was advised to try again.  However, when I attempt to go through the update process again I am told that all apps are up to date.  How can I complete/fix this update?
    Randy

    @ randyhat1,
    This is really unfortunate that you are facing issues with  ACR updates.
    Please verify the current version of ACR on your system.
    Also provide us with the following logs.
    You can find them at:
    ACR  Installer logs
    For Mac:
    Library\Logs\Adobe\Installer
    AAM logs
    For Mac:
    /Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
    You can zip all the files together and send us through mail. This would help us in finding the root cause.
    We can setup a connect session for resolving the issue, What time frame would suit you for connect session? Do let me know accordingly I would send you the request.
    Appreciate your help. Apologize for the inconvenience.
    Regards,
    Ashutosh

  • Can not install this update for kb2667402 windows 7 professional. I tried various fix-it but it did not help Update KB2667402 failed with error 80004005

    I'm not sure where to turn now and am soooooooooo frustrated! I have been trying to get security update KB2667402 with error code 80004005 to install for a couple months without any success.
    So, I finally turned to microsoft tech support... Case# 1186572463
    On Fri. Oct. 26 I was on the phone with a microsoft tech for over 3 hours. The tech that took remote access of my computer said she did not know how to fix my problem and that my case would have to be escalated to a higher level and that I would
    receive a call back on Mon. Oct. 29th. However, I never got a return call.
    Yesterday - Tues. Oct. 30th I called in again and was on the phone for 4.5 hrs with a microsoft tech and he also took remote access of my computer but was not able to fix the problem. I asked to speak to someone at a higher tech level and was told to call
    back into the microsoft helpline.
    The 3rd call - Although I had been told during the prior 2 calls that I was still covered under my warrenty I was now told that I needed to pay for the support call. It took a while to get that straighteded out and to give all my information again to
    the call center but I finally worked with a 3rd tech for over 2 hrs. but had to terminate the call for a conference call I had with a client. The person I worked with said he would call me back between 7-8pmEST so he could continue helping me but I never
    got a return call.
    I have already invested over 10 hrs in the last few days regarding this issue and fear that if I call back in I will once again start over completely with no success which is why I am reaching out here. Is there anyone that has the knowledge of how to fix
    the problem?

    I've been having the same problem and today did some searching and found something that worked.  Check that the download hasn't already been installed - look in the Installed Updates listing for an entry.  If it exists there, uninstall it, and
    then force a Check For Updates and retry the install. This worked for me and I hope it helps.
    Good day, Chuck.

  • I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 profession​al. The create new report VI opens Excel but throws error (-21471672​62- from automation open VI) when I try to open MS word. please help...

    I am using report generation toolkit 1.1 with Labview 7.0 and Office 2003 professional. The create new report VI opens Excel but throws error (-2147167262- from automation open VI) when I try to open MS word. please help...

    Hi Leo22,
    Does this error occur if you use any of the example programs that come shipped with LabVIEW? I would try opening one of the examples that write data to Word and see if those give you an error. Also, have you tried just putting down a New Report.VI and change the report type to Word? If this simple vi (that's all you need to open Word) breaks, I would check to see if there are any instances of Word still open. Check the task manager to see if any word processes are still open. There should not be a problem accessing Word 2003 from LabVIEW 7.0. If neither of these solutions work, please give some more detail about your application and we can research further. Thanks!
    Jeremy L.
    National Instruments
    Jeremy L.
    National Instruments

  • My Top Rated songs, when I synch my iP4S - comes up with an error message saying it can't find all the songs. When I check, library has songs listed but with a "!" bubble next to them. When I click on them they play. What am I doing wrong?

    When synching, itcomes up with an error message saying it can't find all the songs. When I check, library has songs listed but with a "!" bubble next to them. When I click on them they play. What am I doing wrong? This happens every time so I click them and it sorts them (boring with 200 odd). How can I prevent this?

    Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match.  Your iTunes Match library will then appear on your iOS device.

  • I can register an OCX file in Windows 7 x64 without incident but with Windows 7 x32 I get a p-up that says "DllRegisterServer failed with error code: 0x80004005. What gives???

    Hey yeah.  not much else to say.  The title says it all.
    I'm trying to register an OCX file that my video editing application requires to work properly.
    I'm using a  Registry (Regsvr32 and Regsvr64) tool to Register DLL/OCX files.  Both bit Registry tools work fine. I can Register any DLL or OCX file with Windows 7 x64 and everything goes smoothly.
    But, when in Windows 7 x32, again, no problem with merging the Regsvr32 tool, but when I go to register the OCX file message says it was loaded but the DllRegisterServer failed with error: 0x80004005.
    Why does everything work in Windows 7 RC 7100 x64 but not in Windows 7 RC 7100 x32???GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

    I don't know what happened. 
    My Video Editing software was working fine a few days ago in Windows 7 x64.  Tried using it this morning....couldn't load the .mpg video clip.  Just stood there looking stupid like it does in the 32-bit version of Windows 7.
    I was hoping the x64 version of Windows 7 RC 7100 was going to make a decent run against my XP Pro SP3 setup. When I was able to register the required .ocx file for the video editing application, I thought "cool".  I made a TV recording then used the Video Editor to edit it and it worked fine.  Earlier this morinng I made another TV recording, went to go edit it and the video editing application couldn't load the .mpg file at all.  This problem just annihilated any chance of me ever purchasing Windows 7, 32 or 64-bit.GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

Maybe you are looking for