"clone database creation in progress" hangs

I am attempting to install Oracle 9i personal on an XP machine. When the install gets to "clone database creation in progress, it hangs. I cannot successfully stop that part of the install. I have to click the close button at the top right of the window to stop the install. I found the installActions.log in which I found the following:
Unable to read C:\Oracle\Inventory/Contents/OracleHomesList.ser. Some inventory information may be lost.Unable to read C:\Oracle\Inventory/Contents/LibsList.ser. Some inventory information may be lost.
The installer version is 2.0.1.6.0
and
# Not all the dependencies for the component Oracle Starter Database 9.0.1.0.1 are found. Missing Component oracle.rdbms.seeddb.compoltp 9.0.1.0.1.
# Not all the dependencies for the component Oracle Starter Database 9.0.1.0.1 are found. Missing Component oracle.rdbms.seeddb.compdss 9.0.1.0.1.
Does this tell me anything useful? Can anyone give any advice?

Hi, I am new to the Oracle Database. I had recently installed Oracle 9i (9.2.0) on Redhat 9 a couple times and everytime the installation hung at the "clone database creation in progress (46%)" stage. I had also tried to install 9i with software only then use "dbca" to create database but still hung at the exact same stage. Installation of my 9i was from the hard-disk; my PC has 256MB of RAM but I gave 2GB of space to swap. I had a successful installation of Oracle 9i (9.2.0) on SuSe Enterprise 9 and the DB was running smoothly. Can anyone please give me some idea on how to resolve this problem? Your help is greatly appreciated!

Similar Messages

Stuck at "Clone database creation in progress...."

Anyone could please tell me why?
I've tried to install Oracle9i on Solaris8...by its Default Configuation via ./runInstaller (GUI)
I just fill DB name....
,but now I stuck at "Creating and starting Oracle instance"(that is,Clone database creation in progress,50%)

Hi,
have u follow all required steps before starting the installation?
Takes help from tahiti.oracle.com site.
if u r not getting any sucess then restart the installation and this time install it without creating the database.(choose software only option).
after completing the installation ,create the database by dbca tool and choose custom option.
Thanks
Kuljeet

Install hangs in "Clone Database Creation"

I try to install Oracle 11g on my computer. The installation pass all the checks and completes installing the files, then go to "Oracle Database COnfiguration Assistant".
In the "Database Configuration Assistant" dialog, it displays the progress bar to 46% and said "clone database creation in progress", and then the whole progress hangs for 8 hours without any changes. So I think the installer is dead.
I shutdown the installer and computer. Then restart. Then stop all the Oracle services, then call the deinstall to deinstall everything, remove all the registry entries and installed files.
I then restart computer and reinstall Oracle, but the installation hangs on the same progress again. I repeat this for several times. But always cannot complete the installation.
I think maybe there are some problems in cloning the database, so I check the log file, which is appended in this article. One problem is that the creating time of the log is about 8 am, but when I wait to 16 pm, the progress is still hangs and the creating/updating time of the log file is still 8 am, means Oracle does not update for about 8 hours.
The computer environment: Lenovo T500 laptop with WIndows XP(SP3) installed.
Log file:
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
Database closed.
SP2-0640: Not connected
Database dismounted.
ORA-28056: Writing audit records to Windows Event Log failed
OSD-792246492: Message 792246492 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1502) ??????????????????
ORA-01081: cannot start already-running ORACLE - shut it down first
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ERROR:
ORA-28056: Writing audit records to Windows Event Log failed
OSD-216442576: Message 216442576 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1502) ?????????????????? ORA-28056: Writing audit records to
Windows Event Log failed
OSD-216442576: Message 216442576 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1502) ??????????????????
specify password for SYS as parameter 1:
specify password for HR as parameter 2:
specify password for OE as parameter 3:
specify password for PM as parameter 4:
specify password for IX as parameter 5:
specify password for SH as parameter 6:
specify password for BI as parameter 7:
specify INPUT metadata import file as parameter 8:
specify INPUT database backup file for tablespace EXAMPLE as parameter 9:
specify OUTPUT database file for tablespace EXAMPLE as parameter 10:
specify OUTPUT log directory as parameter 11:
Sample Schemas are being plugged in ...
ERROR:
ORA-28056: Writing audit records to Windows Event Log failed
OSD-216442576: Message 216442576 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1502) ?????????????????? ORA-28056: Writing audit records to
Windows Event Log failed
OSD-216442576: Message 216442576 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1502) ??????????????????
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
Edited by: 1006616 on 2013-5-18 下午3:08

1006616 wrote:
The event log problem is not fatal. It will popup a warning said cannot write into the event log, and I click "Ignore" to continue. But the installation still hangs at 46%. I try to purge the event log, and try again. The install will still hangs.
ORA-28056: Writing audit records to Windows Event Log failed
you are entitled to your opinion, regardless of how misguided it may be.
You don't have to convince me, about your reality.
If you want Oracle to install correctly, you need to make sure that NO errors get thrown.
Only you can fix what is wrong on your system.

Create database on RAC environment - DBCA hangs on clone database creation

Hi, friends!
I have two vm´s (vmware 2) with OEL 5 installed.
I´ve installed OGI and database software sucessfully. So, my crs stack is working fine in both two nodes.
However, when i use DBCA to create a database in this RAC environment, it hangs when it gets on "clone database creation", about 52% of the progress bar.
My DBCA logs don´t point any error out. It just hangs on..
I wait about 4 hours and it doesn´t move on.
I searched and found many cases like that, including here in OTN. But it seems nobody could find a resolution to this issue.
Is there any bug about OEL 5 and database 11gR2??
More details:
I apllied the patch "p8670579_112010_LINUX" on both OGI installation (before root.sh) and databae software install (also before root.sh).
Everything worked fine.
Sorry for the grammar errors.

you can trace dbca, and you can found witch step is occurs problem.
can you paste here last 15-20 sentence of dbca trace file?
Mahir

Oracle 9i installation hanging in "Clone Database Creation in Process"

Hi all,
I have been struggling in installing the 9i in my laptop.
Here is my setup,
OS: Windows Server 2003 Enterprise Edition SP2 in VMWare
Database: Oracle 9i 9.2.0.1.0
When it automatically comes to "Database Configuration Assistant", there are 4 steps.
Copying Database files
Initializing Database
Creating and starting Oracle Instance
Completing database creation
The 1st 3 steps has been completed and the installation just hangs at the last step when the completion rate is 88%.
Anyone got problem like this ?
Here are the details I have so far for the DBCA during installation process,
Listener Control complete.
Listener start failed. Listener may already be running.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Since I am completely new to installing DB, please help me to get rid of this frustration.
Thanks !
Regards,
Chris

Capacity Planner 9.2.0.1.0
          Enterprise Manager Events 9.2.0.1.0
          Enterprise Manager Base Classes 9.2.0.1.0
          Required Support Files 9.2.0.1.0
          Enterprise Manager Installation Prerequisite Checks 9.2.0.1.0
          Utilities Common Files 9.2.0.1.0
          Enterprise Manager Quick Tours 9.2.0.1.0
          Oracle Display Fonts 9.0.2.0.0
          regexp 2.0.20.0.0
          Oracle OLAP Worksheet 9.2.0.1.0
          Oracle OLAP API 9.2.0.1.0
          Oracle Developer Server Forms Manager 9.2.0.1.0
          Oracle Intelligent Agent Base Component Files 9.2.0.1.0
          Oracle Internet Directory Client Common Files 9.2.0.1.0
          Sun JDK 1.3.1.0.1a
          Oracle Directory Manager 9.2.0.1.0
          Visigenics ORB 3.4.0.0.0
          Assistant Common Files 9.2.0.1.0
          Enterprise Manager Paging and OMS Common Files 9.2.0.1.0
          XML Parser for C 9.2.0.1.0
          Oracle Net Configuration Assistant 9.2.0.1.0
          Character Set Migration Utility 9.2.0.1.0
          Enterprise Manage Website Translated Files 9.2.0.1.0
          Oracle Net Manager 9.2.0.1.0
          Oracle Net 9.2.0.1.0
          Oracle Perl Interpreter 5.00503.0.0.0c
          Apache Web Server files 1.3.22.0.0a
          Oracle JDBC/OCI Driver for JDK 1.4 9.2.0.1.0
          Database Configuration Assistant 9.2.0.1.0
          Oracle JDBC/OCI Driver for JDK 1.2 9.2.0.1.0
          Oracle INTYPE File Assistant 9.2.0.1.0
          SQLJ Runtime 9.2.0.1.0
          Oracle JDBC/OCI Interfaces 9.2.0.1.0
          Advanced Queueing (AQ) API 9.2.0.1.0
          Oracle Caching Service for Java 2.1.0.0.0a
          Recovery Manager 9.2.0.1.0
          JSDK 2.0.0.0.0d
          Apache JServ 1.1.0.0.0g
          Oracle interMedia Java Client 9.2.0.1.0
          Oracle Java Layout Engine 2.0.1.0.0
          Oracle Administration Assistant for Windows NT 9.2.0.1.0
          Oracle XML SQL Utility 9.2.0.1.0
          SQLJ Translator 9.2.0.1.0
          Enterprise Login Assistant 9.2.0.1.0
          Oracle Services For Microsoft Transaction Server 9.2.0.1.0
          Enterprise Manager Paging Server 9.2.0.1.0
          Oracle Java Tools 9.2.0.1.0
          Oracle ODBC Driver 9.2.0.1.0
          Authentication and Encryption 9.2.0.1.0
          Oracle Wallet Manager 9.2.0.1.0
          Oracle Database User Interface 2.2.11.0.0
          Oracle SNMP Agent 9.2.0.1.0
          Oracle Provider for OLE DB 9.2.0.1.0
          Oracle Objects for OLE 9.2.0.4.4
          Oracle C++ Call Interface 9.2.0.1.0
          Oracle OLAP Cube Viewer 9.2.0.1.0
          Oracle OLAP CWM Lite 9.2.0.1.0
          Object Type Translator 9.2.0.1.0
          SQL*Plus 9.2.0.1.0
          Oracle Call Interface (OCI) 9.2.0.1.0
          SQL*Loader 9.2.0.1.0
          Secure Socket Layer 9.2.0.1.0
          Oracle Internet Directory Client 9.2.0.1.0
          Oracle Net Listener 9.2.0.1.0
          Advanced Replication 9.2.0.1.0
          Oracle Complete DSS Starter Database 9.2.0.1.0
          Oracle Complete OLTP Starter Database 9.2.0.1.0
          Oracle Starter Database 9.2.0.1.0
          Oracle Message Gateway Common Files 9.2.0.1.0
          Oracle Common Schema Demos 9.2.0.1.0
          Change Management Common Files 9.2.0.1.0
          Oracle UIX 2.0.20.0.0
          Oracle Help for the Web 1.0.7.0.0
          XML Class Generator for C++ 9.2.0.1.0
          XML Parser for C++ 9.2.0.1.0
          XML Parser for Oracle JVM 9.2.0.1.0
          XML Transx 9.2.0.1.0
          XML Transviewer Beans 9.2.0.1.0
          XML Class Generator for Java 9.2.0.1.0
          XSQL Servlet 9.2.0.1.0
          XML Parser for PL/SQL 9.2.0.1.0
          Oracle SQLJ 9.2.0.1.0
          Enterprise Manager Common Files 9.2.0.1.0
          Common Files For Generic Connectivity Using OLEDB 9.2.0.1.0
          Oracle SOAP Client 2.0.0.0.0a
          Oracle Workflow Manager 9.2.0.1.0
          Oracle Net Integration 9.2.0.1.0
          Oracle XML Runtime Components 9.2.0.1.0
          Enterprise Manager Database Applications 9.2.0.1.0
          Oracle SOAP Server 2.0.0.0.0a
          Oracle Database Demos 9.2.0.1.0
          Oracle Ultra Search Common Files 9.2.0.1.0
          Enterprise Manager Console 9.2.0.1.0
          Enterprise Manager Integrated Applications 9.2.0.1.0
          Enterprise Manager Client 9.2.0.1.0
          Database Workspace Manager 9.2.0.1.0
          Oracle interMedia Java Advanced Imaging 9.2.0.1.0
          Oracle interMedia Client Compatibility Files 9.2.0.1.0
          Oracle interMedia Java Media Framework Client 9.2.0.1.0
          Oracle interMedia Client Demos 9.2.0.1.0
          Oracle interMedia Web Client 9.2.0.1.0
          BC4J Runtime for Database 9.0.2.692.1
          Oracle Change Management Pack 9.2.0.1.0
          Oracle interMedia Annotator 9.2.0.1.0
          Data Management Services Common Files 9.2.0.1.0
          Oracle interMedia Common Files 9.2.0.1.0
          Oracle interMedia Image 9.2.0.1.0
          Oracle interMedia Audio 9.2.0.1.0
          Oracle interMedia Video 9.2.0.1.0
          Database Upgrade Assistant 9.2.0.1.0
          Oracle Intelligent Agent Config Tool 9.2.0.1.0
          Oracle Intelligent Agent 9.2.0.1.0
          PL/SQL Embedded Gateway 9.2.0.1.0
          Oracle HTTP Server Extensions 9.2.0.1.0
          Oracle eBusiness Management Extensions 9.2.0.1.0
          Oracle EMD Agent Extensions 9.2.0.1.0
          Oracle interMedia Client Option 9.2.0.1.0
          Oracle SOAP for JServ 2.0.0.0.0a
          MIcrosoft SQLServer(TM) Extensions 9.2.0.1.0
          Oracle Management Pack for Oracle Applications 9.2.0.1.0
          Oracle Windows Interfaces 9.2.0.1.0
          Export/Import 9.2.0.1.0
          Apache Configuration for Oracle XML Developer's Kit 9.2.0.1.0
          Oracle Tuning Pack 9.2.0.1.0
          Oracle Forms Extensions 9.2.0.1.0
          Oracle XML Developer's Kit 9.2.0.1.0
          Oracle Java Server Pages 1.1.3.1.0
          Oracle Diagnostics Pack 9.2.0.1.0
          Oracle Ultra Search Middle-Tier 9.2.0.1.0
          Oracle Dynamic Services Server 9.2.0.1.0
          Oracle Mod PL/SQL Gateway 3.0.9.8.3b
          Apache Configuration for Oracle Java Server Pages 1.1.2.3.0
          Oracle Text 9.2.0.1.0
          Generic Connectivity Common Files 9.2.0.1.0
          New Database ID 9.2.0.1.0
          Database SQL Scripts 9.2.0.1.0
          Generic Connectivity Using OLEDB - SQL 9.2.0.1.0
          Oracle HTTP Server 9.2.0.1.0
          XML 9.2.0.1.0
          Generic Connectivity Using OLEDB - FS 9.2.0.1.0
          iSQL*Plus 9.2.0.1.0
          Generic Connectivity Using ODBC 9.2.0.1.0
          Enterprise Manager Webserver Integration 9.2.0.1.0
          Reporting Framework 9.2.0.1.0
          Oracle interMedia Locator 9.2.0.1.0
          Oracle Management Server 9.2.0.1.0
          Oracle Ultra Search Server 9.2.0.1.0
          Oracle interMedia 9.2.0.1.0
          Oracle Trace 9.2.0.1.0
          Oracle9i Syndication Server 9.2.0.1.0
          Enterprise Manager Web Site 9.2.0.1.0
          Oracle Applications Extensions 9.2.0.1.0
          Oracle Intelligent Agent Extensions 9.2.0.1.0
          Oracle Programmer 9.2.0.1.0
          Migration Utility 9.2.0.1.0
          Oracle Enterprise Manager Products 9.2.0.1.0
          Oracle9i Development Kit 9.2.0.1.0
          Oracle Advanced Security 9.2.0.1.0
          Oracle JVM 9.2.0.1.0
          Database Verify Utility 9.2.0.1.0
          PL/SQL 9.2.0.1.0
          Oracle Database Utilities 9.2.0.1.0
          Oracle9i 9.2.0.1.0
          Oracle Net Services 9.2.0.1.0
          Oracle COM Automation Feature 9.2.0.1.0
          Oracle Data Mining 9.2.0.1.0
          Oracle OLAP 9.2.0.1.0
          Oracle Spatial 9.2.0.1.0
          Oracle Partitioning 9.2.0.1.0
          Enterprise Edition Options 9.2.0.1.0
          Oracle9i Database 9.2.0.1.0
Starting to execute optional autolaunch configuration tools
Launched configuration tool Oracle Net Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.8\bin/jrew.exe -Duser.dir=C:\oracle\ora92\network\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\oracle\ora92\jlib\ewt3.jar;C:\oracle\ora92\jlib\ewtcompat-3_3_15.jar;C:\oracle\ora92\network\jlib\NetCA.jar;C:\oracle\ora92\network\jlib\netcam.jar;C:\oracle\ora92\jlib\netcfg.jar;C:\oracle\ora92\jlib\help3.jar;C:\oracle\ora92\jlib\oracle_ice5.jar;C:\oracle\ora92\jlib\share.jar;C:\oracle\ora92\jlib\swingall-1_1_1.jar;C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;C:\oracle\ora92\jlib\srvm.jar;C:\oracle\ora92\network\tools" oracle.net.ca.NetCA /orahome C:\oracle\ora92 /orahnam OraHome92 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp,tcps /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\oracle\ora92\network\install\netca_typ.rsp
Configuration tool Oracle Net Configuration Assistant succeeded
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.8\bin/jrew.exe -DORACLE_HOME="C:\oracle\ora92" -DJDBC_PROTOCOL="thin" -classpath ";C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\oracle\ora92\jlib\ewt3.jar;C:\oracle\ora92\jlib\kodiak.jar;C:\oracle\ora92\jlib\ewtcompat-3_3_15.jar;C:\oracle\ora92\lib\xmlparserv2.jar;C:\oracle\ora92\jdbc\lib\classes111.zip;C:\oracle\ora92\classes;C:\oracle\ora92\jlib\gss-1-1.zip;C:\oracle\ora92\jlib\oembase-9_2_0.jar;C:\oracle\ora92\jlib\srvm.jar;C:\oracle\ora92\assistants\jlib\assistantsCommon.jar;C:\oracle\ora92\jlib\share.jar;C:\oracle\ora92\jlib\swingall-1_1_1.jar;C:\oracle\ora92\assistants\dbca\jlib\dbca.jar;C:\oracle\ora92\jlib\help3.jar;C:\oracle\ora92\jlib\oracle_ice5.jar;C:\oracle\ora92\jlib\netcfg.jar;C:\oracle\ora92\lib\vbjorb.jar;C:\oracle\ora92\lib\vbjtools.jar;C:\oracle\ora92\lib\vbjapp.jar;" oracle.sysman.assistants.dbca.Dbca -progress_only -createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -datafileJarLocation C:\oracle\ora92\assistants\dbca\templates -datafileDestination C:\oracle\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -passwordDialog true Protected value, not to be logged

Installation stops during Database Creation at 45%

Hi all,
I am trying to install Oracle 10g on Windows 2003 Server but whenever i installed it I faced this problem that after installation during configuration proccess when it creats database it stucks on 45% showing status clone databse creation in progress... i have checked log files and i see this
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 289406976 bytes
Fixed Size          1248576 bytes
Variable Size          92275392 bytes
Database Buffers     188743680 bytes
Redo Buffers          7139328 bytes
USERS
specify password for SYS as parameter 1:
specify password for HR as parameter 2:
specify password for OE as parameter 3:
specify password for PM as parameter 4:
specify password for IX as parameter 5:
specify password for SH as parameter 6:
specify password for BI as parameter 7:
specify INPUT metadata import file as parameter 8:
specify INPUT database backup file for tablespace EXAMPLE as parameter 9:
specify OUTPUT database file for tablespace EXAMPLE as parameter 10:
specify OUTPUT log directory as parameter 11:Sample Schemas are being plugged in ...
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
20070625 04:41:09
1 row selected.
old 1: CREATE USER hr IDENTIFIED BY &&password_hr
new 1: CREATE USER hr IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER oe IDENTIFIED BY &&password_oe
new 1: CREATE USER oe IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER ix IDENTIFIED BY &&password_ix
new 1: CREATE USER ix IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER sh IDENTIFIED BY &&password_sh
new 1: CREATE USER sh IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER pm IDENTIFIED BY &&password_pm
new 1: CREATE USER pm IDENTIFIED BY change_on_install
User created.
old 1: CREATE USER bi IDENTIFIED BY &&password_bi
new 1: CREATE USER bi IDENTIFIED BY change_on_install
User created.
Directory created.
Directory created.
Directory created.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
PL/SQL procedure successfully completed.
Grant succeeded.
Could anyone please let me know how can i fix this issue...

The key of the problem may be found here:
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
Which means the dbca is not recognizing some parameter. Initial database creation assumes you are able to connect as sysda without a password, Which means you should be able to connect as a valid user with ORA_DBA and connect as batch privileges. If you are installing with domain related authentication issues, then it could be the most likely reason dbca is not able to go ahead with installation.
1. Determine if you are connected with the ORA_DBA group privilege. It should be so if you are locally connected (not with a domain account)
2. Verfiy if you are able to connect as sysdba, open a sql prompt this way:
sqlplus / as sysdba
3. If you are able to connect, it means your authentication mechanism is properly working.
4. Verify the contents of the alert.log associated with the instance, some error message there will bring light on this issue.
Please feedback on the results of this initial troubleshooting procedure.
~ Madrid.

Oracle 11g Install hangs when "creating clon database"

hi, i'm new with all this stuff, i'm trying to install oracle 11g on a windows 2003 standard edition and the installation hangs in this point:
http://img233.imageshack.us/img233/1458/installni7.jpg
it's almost an hour and it's stuck in 45% when trying to create clon database in "Creating and starting oracle instance".
I checked the log file but it says nothing weird, just that everything went well and a "restore" was made.
what can i do?
thanks!!!

If someone still needs an answer to this:
I had a similar problem with 10g. If you use certain special characters in the password for the database during its creation, some script will hang forever at 45% of the database creation. Just use a plain password without special characters. At the end of the database creation you can change all passwords. At that stage you can use special characters without any problem.
I don't know if this is the same in 11g, but it sounds very similar.
JD

JumpStartKit install hangs at 87% complete during database creation / instance configuration

Hello folks, I'm wanting to evaluate Oracle WebCenter Portal 11.1.1.8 (huge improvement over 11.1.1.7, which I have already gave a quick try in the VDI provided by Oracle).
So I found out about this Jump Start Kit, which installs each required piece once you've got a properly configured Linux environment. I had some fun with the prereqs but now that's all completed and I got SO EXCITED to make it past "STEP 4".
So now I'm encountering the same issue during installation -- in STEP 6 of 22 Configuration of Database Instance (Completing Database Creation) it gets to 87% complete and then nothing seems to happen, it never gets beyond that point even if I wait 10 more hours:
NOTE: I suspect my issue is not specific to the "Jump Start Kit", but rather it is something others have encountered during the Database creation/configuration step of the Oracle Universal Installer in general. And hopefully others have solved it.
"/opt/oracle/portal" is my INSTALL_DIR ; I had launched the JSK installer with this command:
./runme INSTANCE_PASSWORD=apwd ROOT_PASSWORD=rpwd DOWNLOAD_DIR=/media/sf_Downloads/JSKfiles INSTALL_DIR=/opt/oracle/portal
- The installer makes it this far, before it seems to get "stuck" -- even after many hours there is no change, HD is not doing anything, CPU stays at <5% usage:
rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
I am using VirtualBox on Windows 7, I have tried it multiple times, first with the guest OS as Oracle Linux 6, and then Oracle Linux 5 (fun learning about updating the version of Java!).
It always gets to the same point and then it just seems to do nothing -- no progress, but no error message on-screen (see log files below). But it seems to be using less than 5% CPU usage... and waiting 10 hours makes no difference.
Based on what I found in tons of Google searching, I tried increasing my swap file, adding more memory and HD space (12GB RAM and 10GB sap and 20GB free hard drive space) but still nothing changed.
In post #2 of this thread I will separately provide the logging details, which I hope will be helpful.
Thanks in advance!
Darren.
PS: moderator, I attempted to create this thread in other Spaces because I did not know about this "Portal JSK" specific one -- was that why my thread was rejected? NO REASON WAS GIVEN. If that WAS the reason, I have to say that it will be nearly impossible for anyone who is able to help me to actually FIND this thread here because as I said I do not think it specific to ONLY the Portal JSK. (But I will post it only here just in case that's the reason for the previous rejections)

First off, thank you very much for not just deleting the other 2 threads -- I intentionally created them in the other 2 spaces that MIGHT find a set of eyes that can help -- but in both I linked to THIS thread because this is the specific product. So this is the only place replies will be found therefore no "duplication" to worry about... but as I said this is likely not specific to PortalJSK since others on the internet have described a similar problem during the Oracle database installation.
Second of all. here we go, the log contents...
...So in the hope that I could troubleshoot based on some error logging, I had a look inside "/opt/oracle/portal/db/OraInventory/logs/"...
- "/opt/oracle/portal/db/OraInventory/logs/oraInstall2014-06-10_03-27-37PM.err" is empty (0 bytes),
- "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log" * (2.3MB) ends with...
INFO: Terminating all background operations
INFO: Terminated all background operations
INFO: Successfully executed the flow in SILENT mode
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is 0
INFO: Shutdown Oracle Database 11g Release 2 Installer
INFO: Unloading Setup Driver
[eof]
I am not sure of the value of the additional log files inside "/opt/oracle/run/logs/", here is what they contain...
- all of the "/opt/oracle/run/logs/xyz_NofN.zip.unzip.out" files are empty (0 bytes).
- "/opt/oracle/run/logs/install_commands.log" is tiny, it just has this:
/media/sf_Downloads/JSKfiles/DB/database/runInstaller -invPtrLoc /opt/oracle/run/linux64/dborainst.loc -ignoreSysPrereqs -ignorePrereq -force -silent -waitforcompletion -responseFile /opt/oracle/run/linux64/db_generated.rsp
/opt/oracle/portal/db/ohome/bin/netca /orahome /opt/oracle/portal/db/ohome /orahnam orcl /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /responseFile /opt/oracle/run/linux64/netca.rsp /silent
/opt/oracle/portal/db/ohome/bin/dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp -sampleSchema true -oratabLocation ORATAB
- "webtier_prereqs.log" and "ecm_prereqs.log" and "wcprereqs.log" all say that all tests passed.
(Tests for HD and RAM space and swap size and # of processes etc. are all SUCCESS; and all required packages are installed and high enough version, etc.)
- "/opt/oracle/run/logs/dbprereqs_log.txt" says this:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB.   Actual 8855 MB    Passed
Checking swap space: must be greater than 150 MB.   Actual 4031 MB    Passed
Preparing to launch Oracle Universal Installer from /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-26-23PM. Please wait ...[WARNING] [INS-13014] Target environment do not meet some optional requirements.
   CAUSE: Some of the optional prerequisites are not met. See logs for details. /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log
   ACTION: Identify the list of failed prerequisite checks from the log: /opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-26-23PM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
- "/opt/oracle/run/logs/wls-install.log" is the most confusing, maybe this is the reason for getting "stuck"?
2014-06-10 15:24:38,139 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
2014-06-10 15:24:38,143 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
2014-06-10 15:24:38,206 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux32_jdk160_29b11.zip not found..
2014-06-10 15:24:38,209 WARN [home] com.bea.cie.gpr.internal.model.JvmTargetManagerImpl - Property value for linux_ia32_jrockit_160_29_D1.2.0-10_jdk.zip not found..
2014-06-10 15:24:38,225 WARN [home] com.bea.plateng.wizard.installer.silent.tasks.SilentBEAHomeTask - /opt/oracle/portal/fmw directory is not empty. Proceed with installation?
2014-06-10 15:24:39,223 WARN [ocmCredVerify] com.bea.plateng.wizard.installer.helpers.OCMInstallHelper - Failed test connection
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:92)
at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.bea.plateng.wizard.installer.helpers.OCMException: Connection failed in SSL peer verificaition.
at com.bea.plateng.wizard.installer.helpers.OCMHelper.testSimpleConnection(OCMHelper.java:54)
at com.bea.plateng.wizard.installer.helpers.OCMHelper.testConnection(OCMHelper.java:145)
... 8 more
2014-06-10 15:24:39,228 WARN [ocmCredVerify] com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask - OCMInstallException:
com.bea.plateng.wizard.installer.helpers.OCMInstallException
at com.bea.plateng.wizard.installer.helpers.OCMInstallHelper.testConnection(OCMInstallHelper.java:96)
at com.bea.plateng.wizard.installer.silent.tasks.OCMCredVerifySilentTask.execute(OCMCredVerifySilentTask.java:35)
at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
at java.lang.Thread.run(Thread.java:662)
2014-06-10 15:25:49,347 INFO [Thread-13] com.oracle.cie.domain.TemplateImporter - Domain Extension Successful!
2014-06-10 15:25:49,350 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
2014-06-10 15:25:49,351 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
2014-06-10 15:25:49,351 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
2014-06-10 15:25:49,405 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "/opt/oracle/portal/fmw/wlserver_10.3/samples/domains/medrec-spring"
2014-06-10 15:25:49,405 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: update domain
2014-06-10 15:25:49,406 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - close template
2014-06-10 15:25:49,406 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
2014-06-10 15:25:49,743 INFO [WizardController] com.bea.plateng.wizard.silent.tasks.LogTask - The installation was successfull!
^ ^ ^ BUT IT SEEMS TO END AS A "SUCCESS"!?
- "install_setup.log" ends with the following -- and so does "JSKDownloader.log" (the "master log"? it contains basically what shows up on-screen)
rtkit.main.JSKStarter - launchScript:172 - Tue Jun 10 15:41:38 MDT 2014: BEGIN STEP 6 of 22: Configuration of Database Instance. Estimated time is around 5 minutes. Please wait..
10/06/2014 15:41:38.545 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 -
10/06/2014 15:41:48.222 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Copying database files
10/06/2014 15:41:48.413 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 1% complete
10/06/2014 15:41:52.894 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 3% complete
10/06/2014 15:41:52.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 11% complete
10/06/2014 15:42:02.917 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 18% complete
10/06/2014 15:42:32.920 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 26% complete
10/06/2014 15:42:42.638 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 37% complete
10/06/2014 15:42:42.640 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Creating and starting Oracle instance
10/06/2014 15:42:48.568 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 40% complete
10/06/2014 15:42:56.827 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 45% complete
10/06/2014 15:42:57.357 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 46% complete
10/06/2014 15:42:57.526 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 47% complete
10/06/2014 15:42:57.627 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 48% complete
10/06/2014 15:42:57.834 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 49% complete
10/06/2014 15:44:42.915 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 54% complete
10/06/2014 15:44:42.963 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 59% complete
10/06/2014 15:44:43.036 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 60% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 61% complete
10/06/2014 15:44:43.452 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 64% complete
10/06/2014 15:44:43.453 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - Completing Database Creation
10/06/2014 15:44:43.493 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 68% complete
10/06/2014 15:44:43.510 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 72% complete
10/06/2014 15:44:43.571 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 76% complete
10/06/2014 15:45:01.516 -(3)- JSK Starter Thread - oracle.webcenter.jumpstartkit.main.JSKStarter - launchScript:172 - 87% complete
* Here are the final 261 lines of "/opt/oracle/portal/db/OraInventory/logs/installActions2014-06-10_03-27-37PM.log"...
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: SaveInvWCCE JRE files in Scratch
INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Configuration Manager
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: HAS Common Files
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Netca Client
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Database Configuration and Upgrade Assistants
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Enterprise Manager Console DB
INFO: stage loc: /opt/oracle/portal/tmpdir/OraInstall2014-06-10_03-27-37PM/
INFO: Copying Aggr XML for: Oracle Database 11g
INFO: The Top level Aggreage File = /opt/oracle/portal/db/ohome/inventory/ContentsXML/ConfigXML/oracle.server.11_2_0_1_0.xml
INFO: OUI_CAPlugIn is not found in XML
INFO: no. of tools to supress: 0 for comp: Oracle Enterprise Manager Console DB
INFO: cf session will be created for OH: /opt/oracle/portal/db/ohome/ TLAggr: oracle.server instancePath: inventory/ContentsXML/ConfigXML/
INFO: cf session for OH: /opt/oracle/portal/db/ohome/ TL Aggr: [oracle.server] instancePath: inventory/ContentsXML/ConfigXML/
INFO: aggr ref length : 6
INFO: cf session hashcode: 620301082
INFO: cf session saved with key: OraDb11g_home1 oracle.server
INFO: cf session is ok
INFO: created and saved cf session for oh: OraDb11g_home1
INFO: passing params to cf
INFO: Handling the storing of variables for aggr name oracle.sysman.ccr
INFO: This variable s_OPSNodeInfoString is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_createResponseFile is not added to the global context map
INFO: This variable s_ps is not added to the global context map
INFO: This variable s_oraName is not added to the global context map
INFO: This variable s_ccrJarDestination is not added to the global context map
INFO: This variable b_localInstall is not added to the global context map
INFO: This variable b_doConfigCCR is not added to the global context map
INFO: This variable b_ccrUpgrade is not added to the global context map
INFO: This variable s_rspFilePath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: for oracle.has.common no aggregate found by cf: no configuration
INFO: Handling the storing of variables for aggr name oracle.assistants.netca.client
INFO: This variable s_swingallName is not added to the global context map
INFO: This variable s_shareName is not added to the global context map
INFO: This variable s_runtimeLib is not added to the global context map
INFO: This variable s_runTimeJar is not added to the global context map
INFO: This variable s_responseFileName is not added to the global context map
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_netcfgName is not added to the global context map
INFO: This variable s_netcahelpName is not added to the global context map
INFO: This variable s_netcaUpgradeFlag is not added to the global context map
INFO: This variable s_netcaClass is not added to the global context map
INFO: This variable s_netCA_Args is not added to the global context map
INFO: This variable s_netCAInstalledProtocols is not added to the global context map
INFO: This variable s_netAPIName is not added to the global context map
INFO: This variable s_ldapclnt9 is not added to the global context map
INFO: This variable s_ldapclnt11 is not added to the global context map
INFO: This variable s_ldapclnt10 is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable s_jreJarFile is not added to the global context map
INFO: This variable s_jreJar is not added to the global context map
INFO: This variable s_jewtName is not added to the global context map
INFO: This variable s_installTypeForLaunchNETCA is not added to the global context map
INFO: This variable s_icebrowserName is not added to the global context map
INFO: This variable s_helpName is not added to the global context map
INFO: This variable s_ewtcompatName is not added to the global context map
INFO: This variable s_ewtName is not added to the global context map
INFO: This variable s_ewtFile is not added to the global context map
INFO: This variable s_ewtCompat is not added to the global context map
INFO: This variable s_cfgMethod is not added to the global context map
INFO: This variable s_caHelpZhTwJar is not added to the global context map
INFO: This variable s_caHelpZhCnJar is not added to the global context map
INFO: This variable s_caHelpPtBRJar is not added to the global context map
INFO: This variable s_caHelpKoJar is not added to the global context map
INFO: This variable s_caHelpJar is not added to the global context map
INFO: This variable s_caHelpJaJar is not added to the global context map
INFO: This variable s_caHelpItJar is not added to the global context map
INFO: This variable s_caHelpFrJar is not added to the global context map
INFO: This variable s_caHelpEsJar is not added to the global context map
INFO: This variable s_caHelpDeJar is not added to the global context map
INFO: This variable s_authAdaptors is not added to the global context map
INFO: This variable ps_netCA_Args_OverRide is not added to the global context map
INFO: This variable b_net8ServerInstalling is not added to the global context map
INFO: This variable b_javavmIsInstalling is not added to the global context map
INFO: This variable b_isWindows is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_cmanIsInstalling is not added to the global context map
INFO: This variable b_anoIsInstalling is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibDir is not added to the global context map
INFO: This variable s_opsmJlib is not added to the global context map
INFO: This variable s_ntwkTools is not added to the global context map
INFO: This variable s_netjlibDir is not added to the global context map
INFO: This variable s_netcahelpLocation is not added to the global context map
INFO: This variable s_netcaJlibDir is not added to the global context map
INFO: This variable s_netcaDocDir is not added to the global context map
INFO: This variable s_netPropertiesFile is not added to the global context map
INFO: This variable s_netCA is not added to the global context map
INFO: This variable s_net8caFileToInstantiate is not added to the global context map
INFO: This variable s_jre15Location is not added to the global context map
INFO: This variable s_jlibDir is not added to the global context map
INFO: This variable s_inventoryPrereqOui is not added to the global context map
INFO: This variable s_emdwLibDir is not added to the global context map
INFO: This variable s_caHelpDir is not added to the global context map
INFO: This variable s_assistantJlibDir is not added to the global context map
INFO: This variable s_JavaFlag is not added to the global context map
INFO: This variable b_isOPS is not added to the global context map
INFO: This variable s_windowsCommandLine is not added to the global context map
INFO: This variable s_net8caExecutable is not added to the global context map
INFO: This variable s_netcaUserDirArg is not added to the global context map
INFO: This variable s_installTypeForNetCA is not added to the global context map
INFO: This variable s_netcaSilentFlag is not added to the global context map
INFO: This variable s_netCAInstalledProducts is not added to the global context map
INFO: This variable s_netcaClasspath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.assistants.server
INFO: This variable s_operatingSystem is not added to the global context map
INFO: This variable s_jreLocation is not added to the global context map
INFO: This variable pn_dboffset is not added to the global context map
INFO: This variable cs_swingName is not added to the global context map
INFO: This variable cs_komodoName is not added to the global context map
INFO: This variable cs_kodiakName is not added to the global context map
INFO: This variable cs_jewtName is not added to the global context map
INFO: This variable cs_iceBrowserName is not added to the global context map
INFO: This variable cs_ewtcompatName is not added to the global context map
INFO: This variable cs_ewtName is not added to the global context map
INFO: This variable cs_baliShareName is not added to the global context map
INFO: This variable b_orabaseContainsOrahome is not added to the global context map
INFO: This variable b_isWINDOWS is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable sl_dbmaParameterListForIcon is not added to the global context map
INFO: This variable sl_dbcaParameterListForIcon is not added to the global context map
INFO: This variable s_xmlparservLoc is not added to the global context map
INFO: This variable s_ouiJlibLocation is not added to the global context map
INFO: This variable s_oratabLocation is not added to the global context map
INFO: This variable s_opsmLocation is not added to the global context map
INFO: This variable s_dbuaLocation is not added to the global context map
INFO: This variable s_dbcaLocation is not added to the global context map
INFO: This variable s_OracleBinLocation is not added to the global context map
INFO: This variable s_dbcaInstLaunchFile is not added to the global context map
INFO: This variable s_dbcaLaunchFile is not added to the global context map
INFO: This variable s_dbmaLaunchFile is not added to the global context map
INFO: This variable s_dbmaInstLaunchFile is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the global context map
INFO: This variable s_serverInstallType is not added to the global context map
INFO: This variable s_platform is not added to the global context map
INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_nlsLang is not added to the global context map
INFO: This variable s_emailServer is not added to the global context map
INFO: This variable s_emailAddress is not added to the global context map
INFO: This variable s_cfgtyperet is not added to the global context map
INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable n_uploadInterval is not added to the global context map
INFO: This variable localhost is not added to the global context map
INFO: This variable b_launchTools is not added to the global context map
INFO: This variable b_launchBrowser is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_centralConsole is not added to the global context map
INFO: This variable USE_HTTP_PROXY is not added to the global context map
INFO: This variable USE_DB_CONSOLE is not added to the global context map
INFO: This variable SET_CONSOLE_MODE is not added to the global context map
INFO: This variable SA_SETUP is not added to the global context map
INFO: This variable OC4JLOC is not added to the global context map
INFO: This variable NO_PC_MODE is not added to the global context map
INFO: This variable LOGGING_LEVEL is not added to the global context map
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Checkpoint:Failed Checkpoint found returning it for getAllFailedCheckPoints.
INFO: Checkpoint:Failed Checkpoint found returning null for getLastFailedCheckPoint.
INFO: Checkpoint:Index file written and updated
INFO: Checkpoint:Transfer of file done from remote node
INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = /opt/oracle/portal/db/ohome/install/chainedInstall/globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Number of root scripts to be executed = 1
INFO: isSuccessfullInstallation: true
INFO: isSuccessfullRemoteInstallation: true
INFO: Adding ExitStatus SUCCESS to the exit status set
INFO: Completed setting up InstallDB
INFO: Number of root scripts to be executed = 1
INFO: Shutting down OUISetupDriver.JobExecutorThread
INFO: Cleaning up, please wait...
INFO: Dispose the install area control object
INFO: Update the state machine to STATE_CLEAN
INFO: All forked task are completed at state setup
INFO: Completed background operations
INFO: Moved to state <setup>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <setup>
WARNING: Validation disabled for the state setup
INFO: Completed validating state <setup>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state finish
INFO: FinishAction Actions.execute called
INFO: Completed executing action at state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <finish>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <finish>
WARNING: Validation disabled for the state finish
INFO: Completed validating state <finish>
INFO: Terminating all background operations
INFO: Terminated all background operations
INFO: Successfully executed the flow in SILENT mode
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is 0
INFO: Shutdown Oracle Database 11g Release 2 Installer
INFO: Unloading Setup Driver
----------that is all----------
re. PROCESSES/TASKS at the ending:
Also I had a look in System Monitor and noticed there a TON of processes ("Sleeping") that show up in System Monitor at this time of "freezing" or "hanging" or whatever you want to call it (where nothing is visibly happening anymore).
-The most recent shell script is "install_db_instance.sh" (not surprising) with Waiting Channel "do_wait".
#!/bin/bash
export JSK_DIR=${PWD}
. $JSK_DIR/setup_env.sh
export ORACLE_HOME=$DB_ORACLE_HOME
export ORACLE_BASE=$DB_ORACLE_BASE
echo ""
#$DB_ORACLE_HOME/bin/dbca -createDatabase -templateName $JSK_DIR/General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword $SCHEMA_PASSWORD -systemPassword $SCHEMA_PASSWORD -emConfiguration LOCAL -dbsnmpPassword $SCHEMA_PASSWORD -sysmanPassword $SCHEMA_PASSWORD -datafileJarLocation $DB_ORACLE_HOME/assistants/dbca/templates/ -storageType FS -datafileDestination $DB_ORACLE_DATA -responseFile NO_VALUE -characterset AL32UTF8 -obfuscatedPasswords false -sampleSchema true -oratabLocation ORATAB -recoveryAreaDestination NO_VALUE -silent
echo "$ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp -sampleSchema true -oratabLocation ORATAB" >> $LOGS_DIR/install_commands.log
$ORACLE_HOME/bin/dbca -silent -responseFile $JSK_DIR/dbca.rsp -sampleSchema true -oratabLocation ORATAB
cat $JSK_DIR/dbca.rsp | grep -v -i PASSWORD > $JSK_DIR/dbca_saved_no_passwords.rsp
rm -f $JSK_DIR/dbca.rsp
echo ""
-Immediately after that is "java" with this Command Line:
/opt/oracle/portal/db/ohome/jdk/jre/bin/java -DORACLE_HOME=/opt/oracle/portal/db/ohome [parameters] -DJDBC_PROTOCOL=thin -mx128m -classpath /opt/oracle/portal/db/ohome/assistants/dbca/jlib/dbca.jar:[otherJarFiles]:/opt/oracle/portal/db/ohome/dv/jlib/dvca.jar oracle.sysman.assistants.dbca.Dbca -silent -responseFile /opt/oracle/run/linux64/dbca.rsp -sampleSchema true -oratabLocation ORATAB
-There are 7 named "oracleorcl" where the Command Line is simply "oracleorcl (LOCAL=NO)" or "oracleorcl (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))" -- Waiting Channel is "sk_wait_data".
-There are 52 named "oracle" with various similar-looking Command Lines. The Waiting Channel for these varies: "poll_schedule_timeout", or "hrtimer_nanosleep", or "sys_semtimedop" (the 2 highest ProcessIDs -- aka most recent -- have this, with Command Line "ora_w000_orcl" and "xe_w000_XE").
-There are 3 named "sqlplus", their Command Lines are "/opt/oracle/portal/db/ohome/bin/sqlplus -S -N" (the oldest 2), or "/opt/oracle/portal/db/ohome/bin/sqlplus" (the most recent) -- Waiting Channel is "pipe_wait".
Message was edited by: DarrenAg (added PROCESSES/TASKS info)

Database creation process hangs

I am manually creating a database on Windows 2k3 server using Oracle 11 r2. Using the Database Configuration Assistant to create a database, the process hangs for hours.
I figured out and triedthe following:
1. I have attempted using the GUI tool more than once to create the database and each time it hangs.
2. Using the scripts have been created using the with configuration tool, I manually attemped to create database. -- I have attempted more than once.
3. The database creation process hangs while running the EXECRM.SQL file that is called by the CATPCNFG.SQL which is called by CATPROC.SQL which is called by CreateDBCatalog.sql
3. The EXECRM.SQL file hangs on the following statement EXECUTE DMBS_RMIN.INSTALL;
I'm not sure why the PL/SQL packag is hanging at this point. Any help is appreciated.
Thanks,
Sheila

I was able to create the databases prior to installing Enterprise Manager Grid control. I deleted the databases to re-create so they would be registered with Enterprise manager. Once I install Enterprise manager the creation process hung. I have also installed Essbase and Oracle/Hyperion Enterprise Performance Management Suite on the server. I'm trying to do some research on these BI tools.
I'm tempted to uninstall Essbase and the Hyperion producst along with Enteprise Manager and start from scratch to test to see if I can create a database without these other products.

While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and Regards

AAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business.

Oracle 9i manual database creation on the Red Hat 9 Linux

I installed Oracle 9I on the Red Hat 9 Linux successfully with automatic database creation.
I tried to create second database manually and everything seemed to be fine until I issued create database statement. I got the following error:
ERROR at line 1
ORA-01092: ORACLE instance terminated. Disconnection forced.
Please help me to solve the problem.
Thank you,

Ok I am having the same exact problem and I am typing this into the shell before I run the installer.
export DISPLAY=yourdesktop:0.0
I thought that would fix the problem but it still hangs and gives the same message as the other guy gets. How can I solve this problem and get the installer running? I would really appreciate any help. This is the message I get:
[oracle@localhost linux]$ ./runInstaller
Initializing Java Virtual Machine from /tmp/OraInstall2003-08-02_10-09-53PM/jre/bin/java. Please wait...
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Window.<init>(Window.java:188)
at java.awt.Frame.<init>(Frame.java:315)
at java.awt.Frame.<init>(Frame.java:262)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:593)
[oracle@localhost linux]$

10g: Clone database with DBCA silent option

Hello community,
I have tried now for several times to make a clone of my existing database with DBCA and "-silent" option. I could improve my progress in cloning but now I always stick in the following error:
But first, what I have done so far:
1. Created a clone template of my Database with command:
dbca -silent -createCloneTemplate -sourceSID DBORIGIN -templateName myTest.dbc -datafileJarLocation /tmp/oratest
2. Create the clone-database by using the template from (1.) with command:
dbca -silent -createDatabase -templateName myTest.dbc -cloneTemplate -gdbname DBCLONE -sid DBCLONE -datafileJarLocation /tmp/oratest -datafileDestination /oradata -responseFile NO_VALUE -characterset AL32UTF8
Then the progress of execution is shown, it ends with a link to a log file. In this log file I can see the following contents:
==============================
Copying database files
DBCA_PROGRESS : 1%
DBCA_PROGRESS : 3%
DBCA_PROGRESS : 11%
DBCA_PROGRESS : 18%
DBCA_PROGRESS : 26%
DBCA_PROGRESS : 33%
DBCA_PROGRESS : 37%
Creating and starting Oracle instance
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oradata/DBCLONE/<OMF_CONTROL_0>'
ORA-27040: file create error, unable to create file
DBCA_PROGRESS : 38%
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORA-01507: database not mounted
DBCA_PROGRESS : 40%
DBCA_PROGRESS : 41%
ORA-01503: CREATE CONTROLFILE failed
ORA-00200: control file could not be created
ORA-00202: control file: '/oradata/DBCLONE/<OMF_CONTROL_0>'
ORA-27040: file create error, unable to create file
ORA-01507: database not mounted
DBCA_PROGRESS : 46%
DBCA_PROGRESS : 47%
ORA-01219: database not open: queries allowed on fixed tables/views only
ORA-01507: database not mounted
DBCA_PROGRESS : 52%
ORA-01219: database not open: queries allowed on fixed tables/views only
ORA-01507: database not mounted
DBCA_PROGRESS : 53%
DBCA_PROGRESS : 58%
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_DATAPUMP_UTL.REPLACE_DEFAULT_DIR' must be declared
and so on
=====================================================
I have no idea where the "<OMF_CONTROL_0>" comes from. It is nowhere included in my myTest.dbc-file. In my eyes, it looks like that DBCA tries to create the file exactly with this filename - and this fails on Solaris, sure...
Here is, what I have in my template file "myTest.dbc" regarding the control files:
=======================
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="o1_mf_2k1zmdmp_.ctl" filepath="{ORACLE_BASE}/oradata/{DB_UNIQUE_NAME}/"/>
<image name="o1_mf_2k1zmdvo_.ctl" filepath="{ORACLE_BASE}/oradata/{DB_UNIQUE_NAME}/"/>
</ControlfileAttributes>
====================================
To be honest, it is the first time that i try to use the DBCA with all these "special" options, especially the silent mode.
Does anyone have an idea what is going wrong in my case described here? What do I or could I change to come to a success clone?
Maybe, you can tell me where I can find some kind of "how to" for creating a clone using the silent-option.
Thanks a lot in advance for helping a newbie! ;-)
Regards
FireFighter

Hello,
finally I was successful in installing the clone of my DB. :-)
You remember that I had problems with the control files and these looked very strange:
control_files=("/oradata/DBCLONE/<OMF_CONTROL_0>","/oradata/DBCLONE/<OMF_CONTROL_1>")
The hint to check the permission in "/oradata" was a good one. The permissions were right all the time, but Oracle's DBCA was not able to create the sub-directory "DBCLONE". When I created it manually before installing the clone, the installation worked fine!
I'm still wondering about this because all other subdirectories were created automatically during running "dbca" (e.g. all subdirectories "DBCLONE" needed below the $ORACLE_BASE/admin/-directory like adump,bdump and so on...).
And i'm wondering about the names of the control files:
I expected that these strange OMF-names would be replaced by a "normal" file name. But "dbca" was able to create the files exactly with the names "<OMF_CONTROL_0>" and "<OMF_CONTROL_0>"...
As I had understood so far from OMF-concept, isn't the idea that Oracle takes care of file-naming instead of myself? I mean it can't be that I have to enter the template for DBCA and manually enter the control files names...
I'm still close to the thought that it be a bug that isn't documented until now. Maybe, when I have some time left I will open a service request at metalink.
If you are interested in this I will keep you informed on this topic. The other way round I stay interested in your opions and hints for using "dbca" to make and install a DB-clone.
Thanks again for you effort to help me as a rookie in Oracle. :-)
Regards
FireFighter

Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

Is it possible to create a Clone database with the same name of source db ?

Is it possible to create a Clone database with the same name of source db using RMAN ...
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Problem during Database Creation of 8.1.7 in Linux7.2

hello folks,
i am having a problem in creating database of 8.1.7 in Linux7.2 RedHat.
after successful installation,,and after even successfull listener configuration,,
when database creation assistant is creating database; On 82%
At "Initializing database"
it comes::
ORA-03114: not connected to ORACLE
and if we keep on ignoring it ,then it comes:
end of file communication channel.
plz help me what i would do,,
regards.

Hi,
seems that your oracle database went down. just check if oracle is running or not by using ps command.
if its not running go to $ prompt and start the database either using sys or internal user i.e
$svrmgrl
connect internal
$startup or startup force
let me know the result.
Yogi
[email protected]

"clone database creation in progress" hangs

Similar Messages

Maybe you are looking for