Clone database using RMAN on Oracle 10g

contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/26/2009 15:55:39
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01013: user requested canc
el of current operation
how to solve this error?
Kushal

Hi,
but i am not able to configure using enterprise manager. it is always giving error.You could check the OEM forum or raise an SR at metalink.
Hard to tell what is going on without the details.
Regards,
Tycho

Similar Messages

  • Unable to restore database using RMAN in oracle 10g

    Hi Everyone!!!!!!!
    I have following scenario. In which I don't want to drop newly created tablespace (test). So, let me know how to restore database from existing backup without dropping new tablespace and taking new backup?
    1. I took database backup as
    RMAN > backup database;
    2. Create one tablespace "test"
    3. Then I tried to restore database as (In mount mode)
    RMAN > restore database
    4. But I can't restore database. Even I tried after taking "test" tablespace offline , It returns error as follow
    ORA-01119: error in creating database file 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\TESTCAT\TEST.DBF'
    ORA-27038: created file already exists
    OSD-04010: <create> option specified, file already exists
    Please suggest me step/way so that I can restore database without taking new backup or dropping new tablespace (test).........

    Hello;
    Rename this datafile :
    D:\ORACLE\PRODUCT\10.2.0\ORADATA\TESTCAT\TEST.DBF
    Then try the restore again.
    If this isn't a test database stop and think about how you will recover if this does not work. That is how will you recover from the recover if it goes bad?
    Best Regards
    mseberg

  • Clone database using RMAN

    We are using Oracle 10g R2 on Linux.
    We have a development database which is in non-archival mode. Can we clone this database without shutting it down using RMAN.

    <off-topic>
    Paul M. here below what I've seen from the "Overview" tab:
    =================================================================================
    @PaulM. replied (in response to Moazzam)
    We have a development database which is in non-archival mode. Can we clone this database without shutting it down using RMAN. …
    5 minutes ago
    =================================================================================
    I know you, that was impossible that you said this or asked such a question, but my heart missed a beat. I've had to open the discussion or "preview" your response to be sure about what you said.
    We all have to take care about what we are quoting here.
    </off-topic>
    Nicolas.

  • How to refresh the database from target to clone system using RMAN ?

    I created the database using RMAN from target (Node A) to clone (Node B)
    I want to refresh the data what are all the changes happened in (Not complete database only chages) target to clone system using RMAN ? or any other way?

    I want to refresh the data what are all the changes
    happened in (Not complete database only chages)
    target to clone system using RMAN ? or any other way?Incremental changes can't apply, once database is open using RMAN or any other B&R method.STREAMS can be use to capture and apply changes.
    Cheer,
    Virag

  • Create new database using rman cold backup

    It oracle 10g database version 10.2.0.4
    I took the cold backup of the database using rman ( Database name TEST)
    1.RMAN> startup mount;
    2.RMAN> backup database include current controlfile;
    3.RMAN> alter database open;
    I aim to create the new database called DEMO using this backup
    Please let know the setps for creating new database
    Edited by: prajeevan on Jan 19, 2011 9:09 PM

    I took the cold backup of the database using rman ( Database name TEST)
    1.RMAN> startup mount;
    2.RMAN> backup database include current controlfile;
    3.RMAN> alter database open;
    I aim to create the new database called DEMO using this backup
    Please let know the setps for creating new databaseIf it is in archivelog mode you can use duplicate to refresh database DEMO from TEST..
    or after cold backup, go to mount ,
    create trace file of controlfile becuase you are chaning database name
    recreate the controlfile
    open database in resetlogs;
    check also http://blogs.oracle.com/AlejandroVargas/gems/RMANDUPDBPRACTICE.pdf

  • Issue in creating the standby database from Active database using RMAN

    Hi All,
    I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
    Version of Database:11g(11.2.0.1.0)
    Operating System:Linux 5
    Error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    Primary Database Entries:
    Tnsentry:
    SONYPRD =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)(UR=A)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listner Entry:
    SID_LIST_SONYPRD =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtproc)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (SID_NAME = SONYPRD)
    (GLOBAL_DBNAME = SONYPRD)
    Auxiliary Details:
    Tns Entry:
    SONYPRD =
    (DESCRIPTION =
    # (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprd.localdomain)
    SONYPRDSTBY =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = sonyprdstby)(UR=A)
    Listener Entry in auxiliary:
    SID_LIST_SONYPRDSTBY =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = SONYPRDSTBY)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
    (SID_NAME = SONYPRDSTBY)
    TNSPING from Primary DB:
    [oracle@oracle11g ~]$ tnsping sonyprdstby
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
    OK (0 msec)
    TNSPING from Auxuliary server
    [oracle@oracle11gstby ~]$ tnsping sonyprd
    TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
    Copyright (c) 1997, 2009, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
    OK (10 msec)
    Script Used for duplicate:
    run {
    allocate channel prmy1 type disk;
    allocate channel prmy2 type disk;
    allocate channel prmy3 type disk;
    allocate channel prmy4 type disk;
    allocate auxiliary channel stby type disk;
    duplicate target database for standby from active database
    spfile
    parameter_value_convert 'sonyprd','sonyprdstby'
    set db_unique_name='sonyprdstby'
    set db_file_name_convert='/sonyprd/','/sonyprdstby/'
    set log_file_name_convert='/sonyprd/','/sonyprdstby/'
    set control_files='/u01/app/oracle/oradata/control01.ctl'
    set log_archive_max_processes='5'
    set fal_client='sonyprdstby'
    set fal_server='sonyprd'
    set standby_file_management='AUTO'
    set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
    set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
    Tried the script from both Primary and auxiliary but no luck
    [oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
    Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    connected to target database: SONYPRD (DBID=3131093559)
    connected to auxiliary database: SONYPRD (not mounted)
    Listener Status from primary:
    [oracle@oracle11g ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 20-DEC-2012 17:42:17
    Uptime 1 days 0 hr. 26 min. 41 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    Services Summary...
    Service "sonyprd.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    Service "sonyprdXDB.localdomain" has 1 instance(s).
    Instance "sonyprd", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Listener Status from Standby when database bring to Nomount state:
    [oracle@oracle11gstby admin]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
    Copyright (c) 1991, 2009, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date 21-DEC-2012 16:13:47
    Uptime 0 days 1 hr. 58 min. 6 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
    Services Summary...
    Service "sonyprdstby" has 1 instance(s).
    Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
    The command completed successfully
    Please provide any work arounds to proceed further in creating the standby database.
    Thanks,
    Ram.

    Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

  • "In-Memory Database Cache" option for Oracle 10g Enterprise Edition

    Hi,
    In one of our applications, we are using TimesTen 5.1.24 and Oracle 9i
    databases (platform - Solaris 9i).
    TimesTen holds application information which needs to be accessed quickly
    and Oracle 9i is a master application database.
    Now we are looking at an option of migrating from Oracle 9i to Oracle 10g
    database. While exploring about Oracle 10g features, came to know about
    "In-Memory Database Cache" option for Oracle Enterprise Edition. This made
    me to think about using Oracle 10g Enterprise Edition with "In-Memory
    Database Cache" option for our application.
    Following are the advantages that I could visualize by adopting the
    above-mentioned approach:
    1. Data reconciliation between Oracle and TimesTen is not required (i.e.
    data can be maintained only in Oracle tables and for caching "In-Memory
    Database Cache" can be used)
    2. Data maintenance is easy and gives one view access to data
    I have following queries regarding the above-mentioned solution:
    1. What is the difference between "TimesTen In-Memory Database" and
    "In-Memory Database Cache" in terms of features and licensing model?
    2. Is "In-Memory Database Cache" option integrated with Oracle 10g
    installable or a separate installable (i.e. TimesTen installable with only
    cache feature)?
    3. Is "In-Memory Database Cache" option same as that of "TimesTen Cache
    Connect to Oracle" option in TimesTen In-Memory Database?
    4. After integrating "In-Memory Database Cache" option with Oracle 10g, data
    access will happen only through Oracle sqlplus or OCI calls. Am I right here
    in making this statement?
    5. Is it possible to cache the result set of a join query in "In-Memory
    Database Cache"?
    In "Options and Packs" chapter in Oracle documentation
    (http://download.oracle.com/docs/cd/B19306_01/license.102/b14199/options.htm
    #CIHJJBGA), I encountered the following statement:
    "For the purposes of licensing Oracle In-Memory Database Cache, only the
    processors on which the TimesTen In-Memory Database component of the
    In-Memory Database Cache software is installed and/or running are counted
    for the purpose of determining the number of licenses required."
    We have servers with the following configuration. Is there a way to get the
    count of processors on which the Cache software could be installed and/or
    running? Please assist.
    Production box with 12 core 2 duo processors (24 cores)
    Pre-production box with 8 core 2 duo processors (16 cores)
    Development and test box with 2 single chip processors
    Development and test box with 4 single chip processors
    Development and test box with 6 single chip processors
    Thanks & Regards,
    Vijay

    Hi Vijay,
    regarding your questions:
    1. What is the difference between "TimesTen In-Memory Database" and
    "In-Memory Database Cache" in terms of features and licensing model?
    ==> Product has just been renamed and integrated better with the Oracle database - Times-Ten == In-Memory-Cache-Database
    2. Is "In-Memory Database Cache" option integrated with Oracle 10g
    installable or a separate installable (i.e. TimesTen installable with only
    cache feature)?
    ==> Seperate Installation
    3. Is "In-Memory Database Cache" option same as that of "TimesTen Cache
    Connect to Oracle" option in TimesTen In-Memory Database?
    ==> Please have a look here: http://www.oracle.com/technology/products/timesten/quickstart/cc_qs_index.html
    This explains the differences.
    4. After integrating "In-Memory Database Cache" option with Oracle 10g, data
    access will happen only through Oracle sqlplus or OCI calls. Am I right here
    in making this statement?
    ==> Please see above mentioned papers
    5. Is it possible to cache the result set of a join query in "In-Memory
    Database Cache"?
    ==> Again ... ;-)
    Kind regards
    Mike

  • I got the above error while i restore the standby database using RMAN backu

    Dear All,
    RMAN> crosscheck archivelog all;
    using target database controlfile instead of recovery catalog
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=14 devtype=DISK
    specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
    Help need.i take the backup without catalog database.
    regards,
    DB

    rman> list backup;
    it shows lengthier but i showed only the corresponding
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3479    Full    17G        DISK        01:29:42     09-FEB-13
            BP Key: 3479   Status: AVAILABLE   Tag: 09FEB13_FULL_ESMSRV1_DB
            Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
      SPFILE Included: Modification time: 08-FEB-13
      List of Datafiles in backup set 3479
      File LV Type Ckp SCN    Ckp Time  Name
      1       Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
      2       Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
      3       Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
      4       Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
      5       Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
      6       Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
      7       Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
      8       Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
      9       Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
      10      Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
      11      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
      12      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
      13      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
      14      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
      15      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
      16      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
      17      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
      18      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
      19      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
      20      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
      21      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
      22      Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
      23      Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
      39      Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3480    Full    17G        DISK        01:21:30     09-FEB-13
            BP Key: 3480   Status: EXPIRED   Tag: TAG20130209T200021
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
      SPFILE Included: Modification time: 08-FEB-13
      List of Datafiles in backup set 3480
      File LV Type Ckp SCN    Ckp Time  Name
      1       Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
      2       Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
      3       Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
      4       Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
      5       Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
      6       Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
      7       Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
      8       Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
      9       Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
      10      Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
      11      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
      12      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
      13      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
      14      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
      15      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
      16      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
      17      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
      18      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
      19      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
      20      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
      21      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
      22      Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
      23      Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
      39      Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3481    Full    4M         DISK        00:00:03     09-FEB-13
            BP Key: 3481   Status: AVAILABLE   Tag: TAG20130209T212205
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
      Controlfile Included: Ckp SCN: 1759462488   Ckp time: 09-FEB-13
    BS Key  Type LV Size       Device Type Elapsed Time Completion Time
    3482    Full    0          DISK        00:00:01     09-FEB-13
            BP Key: 3482   Status: AVAILABLE   Tag: TAG20130209T212212
            Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
      SPFILE Included: Modification time: 08-FEB-13
    ls -l /oradatabkp
    root@drsrv1#ls -l /oradatabkp
    total 1108672
    drwxr-xr-x   2 ovsd       dba             96 Sep 27  2009 alert_bkp
    -rw-r--r--   1 oracle     dba            195 Mar 15  2007 create.sql
    drwxr-xr-x   2 oracle     dba           8192 Aug  7  2009 ctrl_bkp
    -rw-r--r--   1 root       sys        565114880 Apr 24  2007 drsrv1.tar
    drwxrwxrwx   2 root       sys             96 Jun 17  2011 drsrv2-ignitebkp
    drwxr-xr-x   4 root       sys             96 Apr 24  2007 esmsrv1
    -rw-r-----   1 root       sys        1613824 Feb 22  2007 esmsrv1stby.ctl
    -rw-r--r--   1 esmsrv1    dba           5120 Dec 31  2009 esmtables.dmp
    -rw-r--r--   1 esmsrv1    dba            538 Dec 31  2009 esmtables.log
    drwxrwxrwx   4 root       sys           8192 Mar 10  2009 export
    drwxr-xr-x   8 root       sys           8192 Apr 24  2007 finalbackup
    -rw-r--r--   1 oracle     dba           3820 Sep  5  2008 invalid.sql
    -rw-r--r--   1 esmsrv1    dba         303104 Dec 31  2009 kirdevports.dmp
    -rw-r--r--   1 esmsrv1    dba            591 Dec 31  2009 kirdevports.log
    drwxr-xr-x   2 root       root            96 Feb 12  2007 lost+found
    -rw-r--r--   1 oracle     dba          24954 Aug  9  2009 ovcontrol-090909.ctl
    drwxr-xr-x  22 root       sys           8192 Apr 24  2007 ovpi
    drwxr-xr-x   2 oracle     dba           8192 Aug  7  2009 pfile_bkp
    drwxrw-rw-   4 oracle     dba           8192 Feb 10 15:25 rman
    drwxr-xr-x  28 root       sys           8192 Feb  1 17:15 schedbkp
    drwxr-xr-x   2 oracle     dba           8192 Jul 11  2011 sdnnm
    -rw-r--r--   1 esmsrv1    dba           2196 Dec 31  2009 srirdevports.log
    drwxr-xr-x   2 oracle     dba             96 Mar 13  2009 statsreport
    -rw-r--r--   1 oracle     dba            966 Mar 15  2007 tbs.sql
    drwxr-xr-x   5 oracle     dba             96 Mar 16  2007 testov
    drwxr-xr-x   2 root       sys         442368 Mar 11  2009 trendadm_files
    root@drsrv1#ls -l /oradatabkp/rman
    total 37244448
    drwxr-xr-x   2 oracle     dba           8192 Feb 10 15:25 esmsrv1
    -rw-r-----   1 oracle     dba        19068198912 Feb  9 14:21 esmsrv1_full_db_09feb13
    drwxrw-rw-   2 oracle     dba           8192 Feb  9 21:36 openview
    -rw-r--r--   1 oracle     dba         920442 Feb  9 21:37 rmanbkp-all.log

  • Creation of Logical Standby Database Using RMAN ACTIVE DATABASE COMMAND

    Hi All,
    I am in confusion how to create logical standby database from primary database using rman active database command.
    What i did:-
    Create primary database on machine 1 on RHEL 5 with Oracle 11gR2
    Create standby database on machine 2 on RHEL 5 With Oracle 11gR2 from primary using RMAN active database command
    Trying to create logical standby database on machine 3 on RHEL 5 with Oracle 11gR2 using RMAN active database command from primary.
    The point which confuse me is to start the logical standby in nomount mode on machine 3 with which pfile like i create the pfile for standby database do i need to create the pfile for logical standby db.
    I done the creation of logical standby database by converting physical standby to logical standby database
    I am following the below mentioned doc for the same:
    Creating a physical and a logical standby database in a DR environment | Chen Guang&amp;#039;s Blog
    Kindly guide me how to work over the same or please provide me the steps of the same.
    Thanks in advance.

    Thanks for your reply
    I already started the logical standby database with pfile in nomount mode. And successfully completed the duplication of database. by mentioning the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT parameter.
    But i am not able to receive the logs on the above mentioned blog i run the sql command to check the logs but getting "no rows selected"
    My primary database pfile is:
    pc01prmy.__db_cache_size=83886080
    pc01prmy.__java_pool_size=12582912
    pc01prmy.__large_pool_size=4194304
    pc01prmy.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
    pc01prmy.__pga_aggregate_target=79691776
    pc01prmy.__sga_target=239075328
    pc01prmy.__shared_io_pool_size=0
    pc01prmy.__shared_pool_size=134217728
    pc01prmy.__streams_pool_size=0
    *.audit_file_dest='/u01/app/oracle/admin/pc01prmy/adump'
    *.audit_trail='db'
    *.compatible='11.1.0.0.0'
    *.control_files='/u01/app/oracle/oradata/PC01PRMY/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01PRMY/controlfile/o1_mf_91g3mf6v_.ctl'
    *.db_block_size=8192
    *.db_create_file_dest='/u01/app/oracle/oradata'
    *.db_domain=''
    *.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
    *.db_name='pc01prmy'
    *.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.diagnostic_dest='/u01/app/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
    *.fal_client='PC01PRMY'
    *.fal_server='PC01SBY'
    *.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
    *.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
    *.log_archive_dest_2='SERVICE=pc01sby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=pc01sby'
    *.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='DEFER'
    *.log_archive_dest_state_3='DEFER'
    *.log_archive_max_processes=30
    *.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
    *.open_cursors=300
    *.pga_aggregate_target=78643200
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=236978176
    *.undo_tablespace='UNDOTBS1'
    My logical standby pfile is:-
    pc01ls.__db_cache_size=92274688
    pc01ls.__java_pool_size=12582912
    pc01ls.__large_pool_size=4194304
    pc01ls.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
    pc01ls.__pga_aggregate_target=79691776
    pc01ls.__sga_target=239075328
    pc01ls.__shared_io_pool_size=0
    pc01ls.__shared_pool_size=125829120
    pc01ls.__streams_pool_size=0
    *.audit_file_dest='/u01/app/oracle/admin/pc01ls/adump'
    *.audit_trail='db'
    *.compatible='11.1.0.0.0'
    *.control_files='/u01/app/oracle/oradata/PC01LS/controlfile/o1_mf_91g3mdtr_.ctl','/u01/app/oracle/flash_recovery_area/PC01LS/controlfile/o1_mf_91g3mf6v_.ctl'
    *.db_block_size=8192
    *.db_create_file_dest='/u01/app/oracle/oradata'
    *.db_domain=''
    *.db_file_name_convert='/u01/app/oracle/oradata/PC01SBY/datafile','/u01/app/oracle/oradata/PC01PRMY/datafile'
    *.db_name='pc01prmy'
    *.db_unique_name='pc01ls'
    *.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
    *.db_recovery_file_dest_size=2147483648
    *.diagnostic_dest='/u01/app/oracle'
    *.dispatchers='(PROTOCOL=TCP) (SERVICE=pc01prmyXDB)'
    *.log_archive_config='DG_CONFIG=(pc01prmy,pc01sby,pc01ls)'
    *.log_archive_dest_1='LOCATION=/u01/app/oracle/flash_recovery_area/PC01PRMY/ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=pc01prmy'
    *.log_archive_dest_2='LOCATION=/u01/app/oracle/flash_recovery_area/PC01LS/ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=pc01ls'
    *.log_archive_dest_3='SERVICE=pc01ls LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=pc01ls'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_max_processes=30
    *.log_file_name_convert='/u01/app/oracle/oradata/PC01SBY/onlinelog','/u01/app/oracle/oradata/PC01PRMY/onlinelog'
    *.open_cursors=300
    *.pga_aggregate_target=78643200
    *.processes=150
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sga_target=236978176
    *.undo_tablespace='UNDOTBS1'
    Kindly advice over the same

  • Standby database using rman backup

    I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
    at the time i installed only oracle 11g software.
    Pls guide me to overcome the problem. i'm newcomer to oracle.
    Pls give the steps.
    Edited by: user10444101 on Apr 30, 2010 2:17 AM

    user10444101 wrote:
    I'm using oracle11g on my work place and now i wont to create duplicate database using rman backup.
    at the time i installed only oracle 11g software.
    Pls guide me to overcome the problem. i'm newcomer to oracle.
    Pls give the steps.
    Edited by: user10444101 on Apr 30, 2010 2:17 AMSee the following link
    http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/rcmdupdb.htm#i1008564

  • Why we dont use STANDBY_ARCHIVE_DEST in oracle 10g

    Hi,
    Why we dont use standby_archive_dest in oracle 10g standby database,
    at which location the archives will arrive in standby database if standby redo logs created &
    at which location the archives will arrive in standby database if standby redo logs are not created.
    Please answer.
    Thanks

    Hi,
    But B14239-05 doc for oracle database 10g ,
    Under the 3rd chapter,
    Example 3-5 Modifying Initialization Parameters for a Physical Standby Database
    DB_NAME=chicago
    DB_UNIQUE_NAME=boston
    LOG_ARCHIVE_CONFIG='DG_CONFIG=(chicago,boston)'
    CONTROL_FILES='/arch1/boston/control1.ctl', '/arch2/boston/control2.ctl'
    DB_FILE_NAME_CONVERT='chicago','boston'
    LOG_FILE_NAME_CONVERT=
    '/arch1/chicago/','/arch1/boston/','/arch2/chicago/','/arch2/boston/'
    LOG_ARCHIVE_FORMAT=log%t_%s_%r.arc
    LOG_ARCHIVE_DEST_1=
    'LOCATION=/arch1/boston/
    VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
    DB_UNIQUE_NAME=boston'
    LOG_ARCHIVE_DEST_2=
    'SERVICE=chicago LGWR ASYNC
    VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
    DB_UNIQUE_NAME=chicago'
    LOG_ARCHIVE_DEST_STATE_1=ENABLE
    LOG_ARCHIVE_DEST_STATE_2=ENABLE
    REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
    STANDBY_FILE_MANAGEMENT=AUTO
    FAL_SERVER=chicago
    FAL_CLIENT=boston
    standby_archive_dest is not mentioned?
    Why??

  • Help me! cann't restore database using RMAN!!

    i've backuped database using RMAN,
    now datafile of system tablespace have lost,
    and i execute the command as following:
    run {
    allocate channel c1 type disk;
    restore database;
    these are errors:
    RMAN-03002: failure during compilation of command
    RMAN-03013: command type: restore
    RMAN-03002: failure during compilation of command
    RMAN-03013: command type: IRESTORE
    RMAN-06003: ORACLE error from target database: ORA-01843: not a
    valid month
    RMAN-06097: text of failing SQL statement: select decode(bitand
    (festa,(4096+128)
    ),128,fecps,4096,fecps,0) ,decode(bitand(festa,
    (4096+128)),128,281474976710655,4
    096,controlfile_change#,0) ,decode(bitand(festa,
    (4096+128)),128,SYSDATE,4096,con
    trolfile_time,to_date('JAN 01 1988','MON DD
    YYYY')) ,feofs ,feonc_scn ,to_date(n
    vl(feonc_tim,'01/01/88 00:01:01'),'MM/DD/RR HH24:MI:SS')
    into :b1,:b2,:b3,:b4,:b
    5,:b6 from x$kccfe ,v$database where (fenum=:b7 and fedup=1)
    RMAN-06099: error occurred in source file: krmk.pc, line: 21652

    Try setting the NLS_DATE_FORMAT at the command prompt.

  • Cloning a database using rman where source's dbid changed..

    Any idea on how to .. cloning a database using rman where source's dbid changed..

    if you need to change dbid of target then use DUPLICATE command, see the below links.
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#i1008888
    http://www.oracle-base.com/articles/9i/DuplicateDatabaseUsingRMAN9i.php

  • Standby database using RMAN.

    Hi All,
    Please provide me complete steps to create standby database using RMAN.
    Regards.

    http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm#i636377

  • Migrating database from PostgreSql to Oracle 10g

    Hi
    can anybody help me by providing steps to migrating database from PostgreSql to Oracle 10g. its very urgent requirement. so please let me know if anyone know about this setps.
    thanks in advance.
    jayesh
    cignex technology pvt ltd

    NPD wrote:
    Hi Guys,
    Can one migrate database from sql2005 to Oracle.
    Thanx.You can use [Oracle Migration Tool |http://www.oracle.com/technology/tech/migration/workbench/index.html]
    Kamran Agayev A. (10g OCP)
    http://kamranagayev.wordpress.com
    [Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Maybe you are looking for